summaryrefslogtreecommitdiffstats
path: root/src/plugins/dpdk/device/dpdk.h
AgeCommit message (Collapse)AuthorFilesLines
2018-12-19dpdk plugin: blacklist PCI devices by typeDave Barach1-0/+3
Change-Id: I89695c1ad47131ed830f35c677937ce12025a40d Signed-off-by: Dave Barach <dave@barachs.net>
2018-11-28dpdk: allow interface name to be specified from startup.confDamjan Marion1-0/+2
Example: dpdk { dev 0000:01:00.0 { name eth0 } dev 0000:02:00.0 { name eth1 } } Change-Id: I11e60e969a7e3548c99ac0c0c3531767819cb157 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-11-17pcap-based dispatch tracerDave Barach1-1/+1
To facilitate dispatch trajectory tracing, vlib_buffer_t decoding, etc. through Wireshark Change-Id: I31356b9fa1f40cba8830aaf10a86a9fbb7546438 Signed-off-by: Dave Barach <dave@barachs.net>
2018-11-09dpdk: configure ip4 header checksum rx offload properlyDamjan Marion1-1/+2
Change-Id: I3daf8d473aa37b4597d130d19913b782cf7b8511 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-10-23Numa-aware, growable physical memory allocator (pmalloc)Damjan Marion1-2/+1
Change-Id: Ic4c46bc733afae8bf0d8146623ed15633928de30 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-10-20dpdk: add netvsc PMDStephen Hemminger1-1/+3
Teach DPDK plugin about the netvsc Poll Mode Driver. The speed of the Netvsc device matches the speed of the external port on the underlying vswitch. Therefore 1G, 10G, 25G, 56G and even 100G are possible. Change-Id: I14ab6907b7d8d350b63a083409d45fb9c348a364 Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
2018-10-15dpdk: only look at PCI information on PCI devicesStephen Hemminger1-0/+3
The rte_device is use as a base type of all DPDK devices. It is not valid to use container_of to find PCI information unless the bus of the rte_device is pci. Otherwise, the pointer is looking at some other data, which may or may not be zero. This change introduces a helper function to get rte_pci_device pointer. If device is on PCI bus it returns pointer to rte_pci_device info, otherwise it returns NULL. Change-Id: Ia7446006bb93a7a54844969f3b3dd3b918890dfd Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
2018-09-19dpdk: mask and warn if rx/tx offload is not availableDamjan Marion1-0/+2
Warning messsage is displayed in system log: vpp# show log 1970/ 1/ 1 01:00:01:198 warn dpdk unsupported rx offloads requested on port 0: scatter Change-Id: I40021066daf2d37ca5233e3adce55e412f0d3932 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-09-03Deprecate old buffer replication schemeDamjan Marion1-3/+0
Change-Id: I1f54b994425c58776e1445c8d9fe142e7a644d3d Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-08-16dpdk: fix rss hash function handlingDamjan Marion1-0/+1
DPDK 18.08 verifies if all set bits are supported and fails if not.... Change-Id: Ia87242fcda11147dff3bebe2e2bef32f0a8891fb Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-08-13Multiarch handling in different constructor macrosDamjan Marion1-4/+1
This significantly reduces need for ... in multiarch code. Simply constructor macros will jost create static unused entry if CLIB_MARCH_VARIANT is defined and that will be optimized out by compiler. Change-Id: I17d1c4ac0c903adcfadaa4a07de1b854c7ab14ac Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-07-26Clean up dpdk plugin rx/tx pcap tracingDave Barach1-3/+1
Needed a spinlock to protect the data vector. Cleaned up debug cli so the output makes sense, and so that various parameters exist in one place. Removed a nonsense memset-to-zero which led to ultra-confusing results. Change-Id: I91cd14ce7fe84fd2eceab86e016b5ee001993be4 Signed-off-by: Dave Barach <dbarach@cisco.com>
2018-07-13Add QEDE poll mode driver (librte_pmd_qede)Igor Mikhailov (imichail)1-1/+2
The driver implements Cavium QLogic FastLinQ QL4xxxx 10G/25G/40G/50G/100G Intelligent Ethernet Adapters (IEA) and Converged Network Adapters (CNA) (doc/guides/nics/qede.rst) Change-Id: If17e8cb572eb8c0585085be1c7cfdfa159eb6e68 Signed-off-by: Igor Mikhailov (imichail) <imichail@cisco.com>
2018-06-21configurable per-dispatch-cycle sleepDave Barach1-3/+0
Workaround for lack of driver interrupt support. Also quite handy for home gateway, laptop/vagrant, other use-cases not requiring maximum vectors/second for proper operation. Change-Id: Ifc4b98112450664beef67b89ab8a6940a3bf24b5 Signed-off-by: Dave Barach <dave@barachs.net>
2018-06-19flow:free lookup entries after packets are handledeyal bari1-1/+3
Change-Id: I737dad64bf6dd0743d36500d5cfa1cb1a6594b98 Signed-off-by: Eyal Bari <ebari@cisco.com>
2018-05-31dpdk: Decoupling the meaning of xd->device_index in dpdk_pluginRui Cai1-1/+6
Prior to the change, dpdk plugin assumes xd->device_index is used both as index for internal dpdk_main->devices array and DPDK port index to call into DPDK APIs. However, when running on top of Failsafe PMDs, DPDK port index range may no longer be contiguous (as noted: http://dpdk.org/ml/archives/dev/2018-March/092375.html for related changes in DPDK). Because this, dpdk plugin can no longer iterate through all available DPDK ports with a for 0->rte_eth_dev_count() loop and the assumption of device_index no longer holds. This is part of initial effort to enable vpp running over dpdk on failsafe PMD in Microsoft Azure(3/4). Change-Id: I416fd80f2d40e12e139f8f3492814da98343eae7 Signed-off-by: Rui Cai <rucai@microsoft.com>
2018-05-30dpdk: rename port_id to *_instance_numDamjan Marion1-1/+2
port_id be used for dpdk port_id Change-Id: Ia7d8cdc5dec2ad658c11f9c0f3ef8005a470ac3c Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-05-29dpdk: Add PMD type for Cavium LiquidIO II CN23XXchuhong yao1-1/+2
1、Adding PMD type for support Cavium LiquidIO II CN23XX NIC; 2、Our company is using VPP + DPDK +Cavium LiquidIO II CN23XX NIC, Unfortunately, the latest VPP code does not support Cavium LiquidIO II CN23XX pci. So I increased the PMD type to support LiquidIO NIC, and can run normally, we most subsequent projects are based on VPP + DPDK + Cavium LiquidIO II CN23XX NIC model, so I hope VPP team can adopt this requirement, thanks a lot. Change-Id: I604ae444d69b37c2e26962bfe4ccdfe983b75041 Signed-off-by: chuhong yao <ych@panath.cn>
2018-05-25Add interface rx pcap tracingDave Barach1-2/+13
Should cost at most 1 clock per frame when not enabled. Add "pcap rx trace..." debug CLI, refactored "pcap tx trace" debug CLI to avoid duplicating code. Change-Id: I19ac75d1cf94a6a24c98facbf0753381d37963ea Signed-off-by: Dave Barach <dbarach@cisco.com>
2018-05-12dpdk: Add constants for failsafe PMDRui Cai1-1/+3
Adding name, enum constants and formatting code for failsafe PMD. This is part of initial effort to enable vpp running over dpdk on failsafe PMD in Microsoft Azure(2/4). Change-Id: I4eb0093db9f666e2635f7ddff451e3c9064bd0c4 Signed-off-by: Rui Cai <rucai@microsoft.com>
2018-05-10vnet: device flow offload infraDamjan Marion1-0/+26
Change-Id: Ibea4a96bdec5e368301a03d8b11a0712fa0265e0 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-05-09dpdk: tx code reworkDamjan Marion1-14/+0
Change-Id: Ifea9c772e8784642433b92091f5769eb9ec06890 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-05-04Harmonize vec/pool_get_aligned object sizes and alignment requestsDave Barach1-0/+5
Object sizes must evenly divide alignment requests, or vice versa. Otherwise, only the first object will be aligned as requested. Three choices: add CLIB_CACHE_LINE_ALIGN_MARK(align_me) at the end of structures, manually pad to an even divisor or multiple of the alignment request, or use plain vectors/pools. static assert for enforcement. Change-Id: I41aa6ff1a58267301d32aaf4b9cd24678ac1c147 Signed-off-by: Dave Barach <dbarach@cisco.com>
2018-04-25dpdk: complete rework of the dpdk-input nodeDamjan Marion1-9/+19
Change-Id: If174d189de40e6f9ffae99997bba93a2519d9fda Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-04-18dpdk: improve loggingDamjan Marion1-0/+12
- use of vlib_log for non-dataplane logging - redirect of dpdk logs trough unix pipe into vlib_log - "show dpdk physmem" cli Change-Id: I5da70f9c130273072a8cc80d169df31fc216b2c2 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-04-17dpdk: print device flags in the 'show hardware' outputDamjan Marion1-11/+20
Change-Id: I0d10f13a56420b119fdfad97dcc135b245c269e1 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-03-09Coordinate known Ethernet speeds with Linux kernel and DPDKLee Roberts1-0/+4
Linux kernel and DPDK recognize the following Ethernet speeds: 10M, 100M, 1G, 2.5G, 5G, 10G, 20G, 25G, 40G, 50G, 56G and 100G. Add consistent Ethernet speeds to VPP. Change-Id: I4cfcf378fb34425c1206db5aa2f6bdcc66e0a6ab Signed-off-by: Lee Roberts <lee.roberts@hpe.com>
2018-02-15dpdk: add support for DPDK 18.02, deprecate 17.08Damjan Marion1-6/+0
17.11 is still default. Change-Id: I524d232579db8a59c717c5d760398b6b7f811d03 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-02-12dpdk:fix trace to follow feature arcEyal Bari1-3/+0
Change-Id: Icd2184dec16d30cdcc689ca37c834b5df2f0a1a3 Signed-off-by: Eyal Bari <ebari@cisco.com>
2018-02-07Refactor vlib_buffer flagsDamjan Marion1-3/+0
Change-Id: I853386aebfe488ebb10328435b81b6e3403c5dd0 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-12-14Enable AWS ENA PMDMatthew Smith1-1/+2
Elastic Network Adapter PMD for newer AWS instance types Change-Id: Ic7f6ac4a261ccc7af3ffb2ed8950274532e3feae Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2017-12-04dpdk: remove unused "use_rss" flagEyal Bari1-2/+0
Change-Id: I31d2cbb02a0f59603ef1adc0d185e3d775dfda2f Signed-off-by: Eyal Bari <ebari@cisco.com>
2017-12-04dpdk: remove unused cached eth input nodeEyal Bari1-3/+0
Change-Id: Ic43c70bfe3e93cb3e6cfab7cda1986e44e371c06 Signed-off-by: Eyal Bari <ebari@cisco.com>
2017-11-24dpdk: enable tx checksum offloads as default, add disable knobDamjan Marion1-0/+1
New startup.conf knob: dpdk { ... no-tx-checksum-offload ... } Change-Id: I337fd57616dd77687300861b411b420a3cb75149 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-11-20dpdk: add support for DPDK 17.11Damjan Marion1-9/+13
Also remove DPDK 17.05 support. Change-Id: I4f96cb3f002cd90b12d800d6904f2364d7c4e270 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-11-16dpdk: add additional data to TX traceDamjan Marion1-0/+1
Change-Id: I02b2b69db1e2afe62e3d3413034feb3bdcb3123e Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-11-16dpdk/ipsec: use physmem when creating poolsSergio Gonzalez Monroy1-0/+6
Change-Id: Ic4f797cea6fa21fb29d646256210357cf5267b38 Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
2017-10-25vlib: add support for multiple buffer poolsDamjan Marion1-0/+1
Change-Id: Icaf7d7ad47284aea7a56e8006b69f45874d64202 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-10-24Add extern to *_main global variable declarations in header files.Dave Wallace1-1/+1
- Global variables declared in header files without the use of the 'extern' keword will result in multiple instances of the variable to be created by the compiler -- one for each different source file in which the the header file is included. This results in wasted memory allocated in the BSS segments as well as potentially introducing bugs in the application. Change-Id: I6ef1790b60a0bd9dd3994f8510723decf258b0cc Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2017-09-15dpdk: cli to check for buffer leakageFlorin Coras1-0/+5
Use buffer pre_data and existing buffer trace trajectory code to find out dpdk buffer leakages. Change-Id: I26a5d8bd2f23d01cb6070ffc3ddcc6d3d863b575 Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-09-12devices: Display VhostEthernet instead of UnknownEthernet for dpdk net_vhost ↵Steven1-2/+3
driver Added a new macro VNET_DPDK_PORT_TYPE_VHOST_ETHER for dpdk net_vhost driver to display VhostEthernet instead of UnknownEthernet. Change-Id: Ie407d83ebbbd60e4d11be79f0ebc44e2867a5f3b Signed-off-by: Steven <sluong@cisco.com>
2017-08-25dpdk: required changes for 17.08Sergio Gonzalez Monroy1-0/+7
DPDK 17.08 breaks ethdev and cryptodev APIs. Address those changes while keeping backwards compatibility for DPDK 17.02 and 17.05. Change-Id: Idd6ac264d0d047fe586c41d4c4ca74e8fc778a54 Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
2017-07-18TCP/UDP checksum offload APIDave Barach1-0/+3
Change-Id: I2cb6ce4e29813f6602b14e6e61713fb381fbcef8 Signed-off-by: Dave Barach <dave@barachs.net>
2017-07-13dpdk: fix dpdk_buffer_pool_create nameChris Luke1-0/+3
- vnet_buffer_pool_create should probably be named dpdk_buffer_pool_create since that is what it does. - Its prototype should also be in a DPDK plugin header, not in vlib/buffer_funcs.h, since the implementation is in the plugin and nobody else should be calling it. Change-Id: I7ba259afa4b888bc94f3ad257305e286b41e7370 Signed-off-by: Chris Luke <chrisy@flirble.org>
2017-07-06dpdk: add FiftyGigabitEtherenet interface supportDamjan Marion1-0/+1
Change-Id: Ied8b26179cdf4add34440a9c396cb821716cfb8e Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-07-06Send GARP/NA on bonded intf slave up/down if in active-backup modeJohn Lo1-0/+8
If a bonded interface is in active-backup mode and configured with IPv4 and/or IPv6 addresses, on slave interface link up/down, send a GARP packet if configured with an IPv4 address and an unsolcited NA if configured with an IPv6 address. These packets can help with faster route convergence in the next hop router/switch. Change-Id: I68ccb11a4a40cda414704fa08ee0171c952befa2 Signed-off-by: John Lo <loj@cisco.com>
2017-05-23Added support for Virtio-user interfaces by means of a new VNET_DPDK_PORT_TYPE.Mohammed Hawari1-1/+4
Change-Id: I101e32cee8d9de51227b39ec2639c9fb44da1e6c Signed-off-by: Mohammed Hawari <mhawari@cisco.com>
2017-05-22dpdk: make dpdk global debug level configurableDamjan Marion1-1/+1
Adds startup.conf knob: dpdk { log-level debug } Change-Id: I80dfbc00559528d7b0970958fba9f08d97aa7118 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-05-15dpdk: improve error handling during device initializationDamjan Marion1-4/+8
Change-Id: Ib390164abb07ca0d38fd49e7e2e6b4e9ea856405 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-05-11dpdk: bump to dpdk 17.05Damjan Marion1-22/+0
Change-Id: I19744387859129c6b8dc104041af158bf5f1d988 Signed-off-by: Damjan Marion <damarion@cisco.com>