Age | Commit message (Collapse) | Author | Files | Lines |
|
This patch adds support for the DPDK iAVF PMD
Type: feature
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
Change-Id: I7bb0f621774e4c55b9b7309462e6591ce1b88fb6
|
|
Not in functional state for a long time ...
Type: refactor
Change-Id: I2cc1525a6d49518cbc94faf6afbf0d2d0d515f56
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: feature
This patch adds the devargs support for dpdk device
The devargs are used as hardware-specific init args for dpdk devices
please refer to the nic guides under
$(DPDK_DIR)/doc/guides/nics/$(NIC_DRIVER).rst
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
Change-Id: Id380d04720090bb66afe5ce09d664e5e248b8eb9
|
|
This adds support to compile the bnxt PMD that supports Broadcom's
10/25/40/50/100/200 Gbps NICs. Tested with modified DPDK driver on
x86_64 and aarch64 targets that is pending upstream acceptance, but
should compile just fine today.
Type: feature
Signed-off-by: Andy Gospodarek <gospo@broadcom.com>
Change-Id: I735a991c4cae4fa77e5605094facea54b781a1db
|
|
Type: feature
You can enable tso in starup.conf like this:
dev 0000:86:00.0{
tso on
}
TSO is disabled by default.
Change-Id: Ifdbaf5322f768c384aa54e532d7bf45e810ca01c
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
|
|
.. and remove helper stat struct for keeping last cleared stats.
This is not needed anymore as dpdk lib provides rte_eth_dev_reset().
Change-Id: I78076e689aac7ca70836ce688dfa8e704f64cd84
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Change-Id: I421192e1921d4c9c5486a6dcca745582aebf4e3e
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
We have native implementation and we should not maintain both....
Change-Id: Ic09ebffda52cdc733b3cfeff06690e0d3cc08084
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
The vlib init function subsystem now supports a mix of procedural and
formally-specified ordering constraints. We should eliminate procedural
knowledge wherever possible.
The following schemes are *roughly* equivalent:
static clib_error_t *init_runs_first (vlib_main_t *vm)
{
clib_error_t *error;
... do some stuff...
if ((error = vlib_call_init_function (init_runs_next)))
return error;
...
}
VLIB_INIT_FUNCTION (init_runs_first);
and
static clib_error_t *init_runs_first (vlib_main_t *vm)
{
... do some stuff...
}
VLIB_INIT_FUNCTION (init_runs_first) =
{
.runs_before = VLIB_INITS("init_runs_next"),
};
The first form will [most likely] call "init_runs_next" on the
spot. The second form means that "init_runs_first" runs before
"init_runs_next," possibly much earlier in the sequence.
Please DO NOT construct sets of init functions where A before B
actually means A *right before* B. It's not necessary - simply combine
A and B - and it leads to hugely annoying debugging exercises when
trying to switch from ad-hoc procedural ordering constraints to formal
ordering constraints.
Change-Id: I5e4353503bf43b4acb11a45fb33c79a5ade8426c
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: Idc3763c38f5aa638d4f290f4d4730577601d78b8
Signed-off-by: Simon Zhang <yuwei1.zhang@intel.com>
|
|
Change-Id: Id5b30d7a394551844a79b3d222d2d26194d033df
Signed-off-by: ChenminSun <chenmin.sun@intel.com>
|
|
The log-level dpdk config value should be transparently
forwarded to DPDK via EAL argument. Since DPDK now supports
naming log-levels, VPP no longer needs to parse and call
rte_set_loglevel().
This was the other part of the DPDK log-level change.
It must have got missed during my initial checkin.
Without it passing dynamic log-level values like are silently
ignored.
Fixes: 6ca6ac6c887e ("dpdk: support passing log-level")
Change-Id: I732cec5f638c9924e3ffb04c4753f957e3633d64
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
|
|
Moved code to the ethernet input node, and the interface output
path(s). Since we no longer skip ethernet-input, there's no reason
for device drivers to know anything about pcap rx tracing, etc.
Change-Id: I08d32fb1b90cbee1bd4f609837d533e047b36fa4
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: Ieab56e0a20696b8cc97f783f08f10a94a83644eb
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
This patch introduces following changes:
- deprecated free lists which are not used and not compatible
with external buffer managers (i.e. DPDK)
- introduces native support for per-numa buffer pools
- significantly improves performance of buffer alloc and free
Change-Id: I4a8e723ae47056717afd6cac0efe87cb731b5be7
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I998658ad7860b23425444e218ce2e1ec655b885a
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I89695c1ad47131ed830f35c677937ce12025a40d
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Example:
dpdk {
dev 0000:01:00.0 { name eth0 }
dev 0000:02:00.0 { name eth1 }
}
Change-Id: I11e60e969a7e3548c99ac0c0c3531767819cb157
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
To facilitate dispatch trajectory tracing, vlib_buffer_t decoding, etc.
through Wireshark
Change-Id: I31356b9fa1f40cba8830aaf10a86a9fbb7546438
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: I3daf8d473aa37b4597d130d19913b782cf7b8511
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: Ic4c46bc733afae8bf0d8146623ed15633928de30
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Teach DPDK plugin about the netvsc Poll Mode Driver.
The speed of the Netvsc device matches the speed of the external
port on the underlying vswitch. Therefore 1G, 10G, 25G, 56G and
even 100G are possible.
Change-Id: I14ab6907b7d8d350b63a083409d45fb9c348a364
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
|
|
The rte_device is use as a base type of all DPDK devices.
It is not valid to use container_of to find PCI information
unless the bus of the rte_device is pci. Otherwise, the
pointer is looking at some other data, which may or may not
be zero.
This change introduces a helper function to get rte_pci_device
pointer. If device is on PCI bus it returns pointer to
rte_pci_device info, otherwise it returns NULL.
Change-Id: Ia7446006bb93a7a54844969f3b3dd3b918890dfd
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
|
|
Warning messsage is displayed in system log:
vpp# show log
1970/ 1/ 1 01:00:01:198 warn dpdk unsupported rx offloads requested on port 0: scatter
Change-Id: I40021066daf2d37ca5233e3adce55e412f0d3932
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I1f54b994425c58776e1445c8d9fe142e7a644d3d
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
DPDK 18.08 verifies if all set bits are supported and fails if not....
Change-Id: Ia87242fcda11147dff3bebe2e2bef32f0a8891fb
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
This significantly reduces need for
...
in multiarch code. Simply constructor macros will jost create static unused
entry if CLIB_MARCH_VARIANT is defined and that will be optimized out by
compiler.
Change-Id: I17d1c4ac0c903adcfadaa4a07de1b854c7ab14ac
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Needed a spinlock to protect the data vector. Cleaned up debug cli so
the output makes sense, and so that various parameters exist in one
place. Removed a nonsense memset-to-zero which led to ultra-confusing
results.
Change-Id: I91cd14ce7fe84fd2eceab86e016b5ee001993be4
Signed-off-by: Dave Barach <dbarach@cisco.com>
|
|
The driver implements Cavium QLogic FastLinQ QL4xxxx 10G/25G/40G/50G/100G
Intelligent Ethernet Adapters (IEA) and Converged Network Adapters (CNA)
(doc/guides/nics/qede.rst)
Change-Id: If17e8cb572eb8c0585085be1c7cfdfa159eb6e68
Signed-off-by: Igor Mikhailov (imichail) <imichail@cisco.com>
|
|
Workaround for lack of driver interrupt support. Also quite handy for
home gateway, laptop/vagrant, other use-cases not requiring maximum
vectors/second for proper operation.
Change-Id: Ifc4b98112450664beef67b89ab8a6940a3bf24b5
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: I737dad64bf6dd0743d36500d5cfa1cb1a6594b98
Signed-off-by: Eyal Bari <ebari@cisco.com>
|
|
Prior to the change, dpdk plugin assumes xd->device_index is
used both as index for internal dpdk_main->devices array
and DPDK port index to call into DPDK APIs.
However, when running on top of Failsafe PMDs,
DPDK port index range may no longer be contiguous (as noted:
http://dpdk.org/ml/archives/dev/2018-March/092375.html
for related changes in DPDK). Because this, dpdk plugin can
no longer iterate through all available DPDK ports
with a for 0->rte_eth_dev_count() loop and the assumption of
device_index no longer holds.
This is part of initial effort to enable vpp running over
dpdk on failsafe PMD in Microsoft Azure(3/4).
Change-Id: I416fd80f2d40e12e139f8f3492814da98343eae7
Signed-off-by: Rui Cai <rucai@microsoft.com>
|
|
port_id be used for dpdk port_id
Change-Id: Ia7d8cdc5dec2ad658c11f9c0f3ef8005a470ac3c
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
1、Adding PMD type for support Cavium LiquidIO II CN23XX NIC;
2、Our company is using VPP + DPDK +Cavium LiquidIO II CN23XX NIC,
Unfortunately, the latest VPP code does not support
Cavium LiquidIO II CN23XX pci.
So I increased the PMD type to support LiquidIO NIC,
and can run normally, we most subsequent projects are
based on VPP + DPDK + Cavium LiquidIO II CN23XX NIC model,
so I hope VPP team can adopt this requirement, thanks a lot.
Change-Id: I604ae444d69b37c2e26962bfe4ccdfe983b75041
Signed-off-by: chuhong yao <ych@panath.cn>
|
|
Should cost at most 1 clock per frame when not enabled.
Add "pcap rx trace..." debug CLI, refactored "pcap tx trace" debug CLI
to avoid duplicating code.
Change-Id: I19ac75d1cf94a6a24c98facbf0753381d37963ea
Signed-off-by: Dave Barach <dbarach@cisco.com>
|
|
Adding name, enum constants and formatting code
for failsafe PMD.
This is part of initial effort to enable vpp running over
dpdk on failsafe PMD in Microsoft Azure(2/4).
Change-Id: I4eb0093db9f666e2635f7ddff451e3c9064bd0c4
Signed-off-by: Rui Cai <rucai@microsoft.com>
|
|
Change-Id: Ibea4a96bdec5e368301a03d8b11a0712fa0265e0
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: Ifea9c772e8784642433b92091f5769eb9ec06890
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Object sizes must evenly divide alignment requests, or vice
versa. Otherwise, only the first object will be aligned as
requested.
Three choices: add CLIB_CACHE_LINE_ALIGN_MARK(align_me) at
the end of structures, manually pad to an even divisor or multiple of
the alignment request, or use plain vectors/pools.
static assert for enforcement.
Change-Id: I41aa6ff1a58267301d32aaf4b9cd24678ac1c147
Signed-off-by: Dave Barach <dbarach@cisco.com>
|
|
Change-Id: If174d189de40e6f9ffae99997bba93a2519d9fda
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
- use of vlib_log for non-dataplane logging
- redirect of dpdk logs trough unix pipe into vlib_log
- "show dpdk physmem" cli
Change-Id: I5da70f9c130273072a8cc80d169df31fc216b2c2
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I0d10f13a56420b119fdfad97dcc135b245c269e1
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Linux kernel and DPDK recognize the following Ethernet speeds:
10M, 100M, 1G, 2.5G, 5G, 10G, 20G, 25G, 40G, 50G, 56G and 100G.
Add consistent Ethernet speeds to VPP.
Change-Id: I4cfcf378fb34425c1206db5aa2f6bdcc66e0a6ab
Signed-off-by: Lee Roberts <lee.roberts@hpe.com>
|
|
17.11 is still default.
Change-Id: I524d232579db8a59c717c5d760398b6b7f811d03
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: Icd2184dec16d30cdcc689ca37c834b5df2f0a1a3
Signed-off-by: Eyal Bari <ebari@cisco.com>
|
|
Change-Id: I853386aebfe488ebb10328435b81b6e3403c5dd0
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Elastic Network Adapter PMD for newer AWS instance types
Change-Id: Ic7f6ac4a261ccc7af3ffb2ed8950274532e3feae
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Change-Id: I31d2cbb02a0f59603ef1adc0d185e3d775dfda2f
Signed-off-by: Eyal Bari <ebari@cisco.com>
|
|
Change-Id: Ic43c70bfe3e93cb3e6cfab7cda1986e44e371c06
Signed-off-by: Eyal Bari <ebari@cisco.com>
|
|
New startup.conf knob:
dpdk { ... no-tx-checksum-offload ... }
Change-Id: I337fd57616dd77687300861b411b420a3cb75149
Signed-off-by: Damjan Marion <damarion@cisco.com>
|