aboutsummaryrefslogtreecommitdiffstats
path: root/src/plugins/dpdk/device/dpdk.h
AgeCommit message (Collapse)AuthorFilesLines
2018-04-18dpdk: improve loggingDamjan Marion1-0/+12
- use of vlib_log for non-dataplane logging - redirect of dpdk logs trough unix pipe into vlib_log - "show dpdk physmem" cli Change-Id: I5da70f9c130273072a8cc80d169df31fc216b2c2 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-04-17dpdk: print device flags in the 'show hardware' outputDamjan Marion1-11/+20
Change-Id: I0d10f13a56420b119fdfad97dcc135b245c269e1 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-03-09Coordinate known Ethernet speeds with Linux kernel and DPDKLee Roberts1-0/+4
Linux kernel and DPDK recognize the following Ethernet speeds: 10M, 100M, 1G, 2.5G, 5G, 10G, 20G, 25G, 40G, 50G, 56G and 100G. Add consistent Ethernet speeds to VPP. Change-Id: I4cfcf378fb34425c1206db5aa2f6bdcc66e0a6ab Signed-off-by: Lee Roberts <lee.roberts@hpe.com>
2018-02-15dpdk: add support for DPDK 18.02, deprecate 17.08Damjan Marion1-6/+0
17.11 is still default. Change-Id: I524d232579db8a59c717c5d760398b6b7f811d03 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-02-12dpdk:fix trace to follow feature arcEyal Bari1-3/+0
Change-Id: Icd2184dec16d30cdcc689ca37c834b5df2f0a1a3 Signed-off-by: Eyal Bari <ebari@cisco.com>
2018-02-07Refactor vlib_buffer flagsDamjan Marion1-3/+0
Change-Id: I853386aebfe488ebb10328435b81b6e3403c5dd0 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-12-14Enable AWS ENA PMDMatthew Smith1-1/+2
Elastic Network Adapter PMD for newer AWS instance types Change-Id: Ic7f6ac4a261ccc7af3ffb2ed8950274532e3feae Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2017-12-04dpdk: remove unused "use_rss" flagEyal Bari1-2/+0
Change-Id: I31d2cbb02a0f59603ef1adc0d185e3d775dfda2f Signed-off-by: Eyal Bari <ebari@cisco.com>
2017-12-04dpdk: remove unused cached eth input nodeEyal Bari1-3/+0
Change-Id: Ic43c70bfe3e93cb3e6cfab7cda1986e44e371c06 Signed-off-by: Eyal Bari <ebari@cisco.com>
2017-11-24dpdk: enable tx checksum offloads as default, add disable knobDamjan Marion1-0/+1
New startup.conf knob: dpdk { ... no-tx-checksum-offload ... } Change-Id: I337fd57616dd77687300861b411b420a3cb75149 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-11-20dpdk: add support for DPDK 17.11Damjan Marion1-9/+13
Also remove DPDK 17.05 support. Change-Id: I4f96cb3f002cd90b12d800d6904f2364d7c4e270 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-11-16dpdk: add additional data to TX traceDamjan Marion1-0/+1
Change-Id: I02b2b69db1e2afe62e3d3413034feb3bdcb3123e Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-11-16dpdk/ipsec: use physmem when creating poolsSergio Gonzalez Monroy1-0/+6
Change-Id: Ic4f797cea6fa21fb29d646256210357cf5267b38 Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
2017-10-25vlib: add support for multiple buffer poolsDamjan Marion1-0/+1
Change-Id: Icaf7d7ad47284aea7a56e8006b69f45874d64202 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-10-24Add extern to *_main global variable declarations in header files.Dave Wallace1-1/+1
- Global variables declared in header files without the use of the 'extern' keword will result in multiple instances of the variable to be created by the compiler -- one for each different source file in which the the header file is included. This results in wasted memory allocated in the BSS segments as well as potentially introducing bugs in the application. Change-Id: I6ef1790b60a0bd9dd3994f8510723decf258b0cc Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2017-09-15dpdk: cli to check for buffer leakageFlorin Coras1-0/+5
Use buffer pre_data and existing buffer trace trajectory code to find out dpdk buffer leakages. Change-Id: I26a5d8bd2f23d01cb6070ffc3ddcc6d3d863b575 Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-09-12devices: Display VhostEthernet instead of UnknownEthernet for dpdk net_vhost ↵Steven1-2/+3
driver Added a new macro VNET_DPDK_PORT_TYPE_VHOST_ETHER for dpdk net_vhost driver to display VhostEthernet instead of UnknownEthernet. Change-Id: Ie407d83ebbbd60e4d11be79f0ebc44e2867a5f3b Signed-off-by: Steven <sluong@cisco.com>
2017-08-25dpdk: required changes for 17.08Sergio Gonzalez Monroy1-0/+7
DPDK 17.08 breaks ethdev and cryptodev APIs. Address those changes while keeping backwards compatibility for DPDK 17.02 and 17.05. Change-Id: Idd6ac264d0d047fe586c41d4c4ca74e8fc778a54 Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
2017-07-18TCP/UDP checksum offload APIDave Barach1-0/+3
Change-Id: I2cb6ce4e29813f6602b14e6e61713fb381fbcef8 Signed-off-by: Dave Barach <dave@barachs.net>
2017-07-13dpdk: fix dpdk_buffer_pool_create nameChris Luke1-0/+3
- vnet_buffer_pool_create should probably be named dpdk_buffer_pool_create since that is what it does. - Its prototype should also be in a DPDK plugin header, not in vlib/buffer_funcs.h, since the implementation is in the plugin and nobody else should be calling it. Change-Id: I7ba259afa4b888bc94f3ad257305e286b41e7370 Signed-off-by: Chris Luke <chrisy@flirble.org>
2017-07-06dpdk: add FiftyGigabitEtherenet interface supportDamjan Marion1-0/+1
Change-Id: Ied8b26179cdf4add34440a9c396cb821716cfb8e Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-07-06Send GARP/NA on bonded intf slave up/down if in active-backup modeJohn Lo1-0/+8
If a bonded interface is in active-backup mode and configured with IPv4 and/or IPv6 addresses, on slave interface link up/down, send a GARP packet if configured with an IPv4 address and an unsolcited NA if configured with an IPv6 address. These packets can help with faster route convergence in the next hop router/switch. Change-Id: I68ccb11a4a40cda414704fa08ee0171c952befa2 Signed-off-by: John Lo <loj@cisco.com>
2017-05-23Added support for Virtio-user interfaces by means of a new VNET_DPDK_PORT_TYPE.Mohammed Hawari1-1/+4
Change-Id: I101e32cee8d9de51227b39ec2639c9fb44da1e6c Signed-off-by: Mohammed Hawari <mhawari@cisco.com>
2017-05-22dpdk: make dpdk global debug level configurableDamjan Marion1-1/+1
Adds startup.conf knob: dpdk { log-level debug } Change-Id: I80dfbc00559528d7b0970958fba9f08d97aa7118 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-05-15dpdk: improve error handling during device initializationDamjan Marion1-4/+8
Change-Id: Ib390164abb07ca0d38fd49e7e2e6b4e9ea856405 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-05-11dpdk: bump to dpdk 17.05Damjan Marion1-22/+0
Change-Id: I19744387859129c6b8dc104041af158bf5f1d988 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-05-10dpdk: refactor interface speed detectionDamjan Marion1-1/+4
- Adds VirtualFucntionEthernet for VFs - Enables MLX4 driver Change-Id: I163300e68edbe033227f641bdfcfe5918cbe58cf Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-05-09dpdk: refactor setup, start, stop codeDamjan Marion1-1/+3
Change-Id: I0fec86914ec027383ff511b7092beac2363f55f7 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-05-08dpdk: use speed_capa to detect i40e device speedDamjan Marion1-0/+1
Change-Id: I1decca6fb5ce6de74ccbcd5a262ebd3db6f55cdc Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-05-02dpdk: remove unused codeDamjan Marion1-33/+1
Change-Id: I16dcc0de2553c6c1eb87dd1ec4c8d3c649e6f285 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-04-28dpdk: cryptodev support enabled by defaultSergio Gonzalez Monroy1-1/+0
This patch slightly modifes how to enable DPDK Cryptodev. The startup option 'enable-cryptodev' has been removed and unless not enough cryptodevs are found, DPDK cryptodev will be enabled by default. Change-Id: Ic0ac507802cdc0eeb51f065e04ec43a1885617cf Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
2017-04-27dpdk: cleanup, move APIs to separate .c fileDamjan Marion1-12/+0
Change-Id: Id632ff1b30be808d9f270e2f77260391569fbda2 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-04-11dpdk: use common interface placement infraDamjan Marion1-6/+1
This pathch deprecates "show dpdk placement" and "set dpdk placement" CLI commands. Change-Id: I4e052ec3e8b8e6c54b4816e1e689e5b7a24892db Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-03-18Fix bonded interface name to use instance number starting from 0John Lo1-2/+2
With DPDK 17.02, bonded interface device_index does not start from 0 and may vary depends on the existence of other interfaces. Implement instance number for bonded interface so the interface name can make use of instance number starting from 0. Change-Id: Ia8eb7bd530446faa02ee7c7d1f6abdc22ac60b62 Signed-off-by: John Lo <loj@cisco.com>
2017-03-17Fix bonded ethernet PMD name for DPDK 17.02Alexander Popovsky (apopovsk)1-0/+21
In DPDK 17.02 bonded PMD name is changed from rte_bond_pmd to net_bonding. Change-Id: I1a57a16b0ae68b5fa56a561a4f75981112228572 Signed-off-by: Alexander Popovsky (apopovsk) <apopovsk@cisco.com>
2017-03-08dpdk: dpdk-input optimizations and fixesDamjan Marion1-0/+3
- fix issue caused by assumption that ethertype starts at 0 - intoduce buffer templates to speed-up vlib_buffer_t metadata initialization - avoid check for multiseg buffers inside loop if multiseg is disabled - interleave prefetches to reduce load on L1 cache Change-Id: I3b76e6d3e1e15ed28f01625edb7fbe9f38112e03 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-03-08Change dpdk input node fixed-sleep units to usecDave Barach1-2/+2
Change-Id: I94e8737cad9222d24602db4ad03bf43c12c62b79 Signed-off-by: Dave Barach <dave@barachs.net>
2017-03-01dpdk: be a pluginDamjan Marion1-0/+490
Change-Id: I238258cdeb77035adc5e88903d824593d0a1da90 Signed-off-by: Damjan Marion <damarion@cisco.com>