summaryrefslogtreecommitdiffstats
path: root/src/plugins/dpdk/device/format.c
AgeCommit message (Collapse)AuthorFilesLines
2019-01-13dpdk: show hardware may display the wrong information for rss activeSteven1-0/+1
Some dpdk driver does not support rte_eth_dev_rss_hash_conf_get. When that happens, we display whatever that was in the stack variable for rss_hf which is confusing. The fix is to clear rss_hf prior to the call. Before the fix -------------- DBGvpp# sh hard Name Idx Link Hardware format_dpdk_device:599: rte_eth_dev_rss_hash_conf_get returned -95 GigabitEthernet13/0/0 2 up GigabitEthernet13/0/0 Link speed: 10 Gbps Ethernet address 00:0c:29:c4:8c:eb VMware VMXNET3 ... rss avail: ipv4 ipv4-tcp ipv6 ipv6-tcp rss active: ipv4 ipv4-frag ipv4-tcp ipv4-udp ipv4-other After the fix ------------- DBGvpp# sh hard Name Idx Link Hardware format_dpdk_device:600: rte_eth_dev_rss_hash_conf_get returned -95 GigabitEthernet13/0/0 2 up GigabitEthernet13/0/0 Link speed: 10 Gbps Ethernet address 00:0c:29:c4:8c:eb VMware VMXNET3 .. rss avail: ipv4 ipv4-tcp ipv6 ipv6-tcp rss active: none Change-Id: If8f8327f0012eecc8d23cd7f3f9cc581ca025654 Signed-off-by: Steven <sluong@cisco.com>
2018-11-28dpdk: allow interface name to be specified from startup.confDamjan Marion1-0/+3
Example: dpdk { dev 0000:01:00.0 { name eth0 } dev 0000:02:00.0 { name eth1 } } Change-Id: I11e60e969a7e3548c99ac0c0c3531767819cb157 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-11-08vnet: store hw interface speed in kbps instead of using flagsDamjan Marion1-2/+2
Change-Id: Idd4471a3adf7023e48e85717f00c786b1dde0cca Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-11-06dpdk: format_dpdk_device_name cleanupDamjan Marion1-7/+7
Change-Id: I49a5029d256df8f749ee30d19ff7473147b6516f Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-11-06dpdk: fix device name suffix confusion with failsafe/netvscStephen Hemminger1-2/+2
When netvsc or failsafe DPDK device is used, the DPDK port id does not match the VPP device instance id. The code that formats the device name was incorrectly calling DPDK device info using the VPP device instance id. This causes the VPP interface to be named "FortyGigabit0/2/0" based on mistakenly finding the PCI device information of the hidden DPDK port id for the VF device. Change-Id: I9366232f4b2087076bdcc1a58bf228007c24c084 Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
2018-11-06dpdk: fix pmd device type when using netvsc or failsafeStephen Hemminger1-1/+1
The pmd device type show with 'show hardware' is wrong if using failsafe (or netvsc pmd) because the pmd device type should be based of the VPP device instance, not the DPDK port id. Fixes: a059a000f81a ("dpdk: Decoupling the meaning of xd->device_index in dpdk_plugin") Change-Id: I3880fe674731880c5706a21d8ef3ccf8d569d46d Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
2018-11-02dpdk: restore special handling for failsafe driverStephen Hemminger1-1/+1
The failsafe driver is unique because it shares device with underlying pci device. This confuses name generation. Without this fix, the name is wrong and multiple devices get created with same name. Fixes: 3901a038edf4 ("dpdk: only look at PCI information on PCI devices") Change-Id: I13796d03baf6c76dafe3667c83bea4a1ae30c48f Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
2018-10-20dpdk: add netvsc PMDStephen Hemminger1-0/+4
Teach DPDK plugin about the netvsc Poll Mode Driver. The speed of the Netvsc device matches the speed of the external port on the underlying vswitch. Therefore 1G, 10G, 25G, 56G and even 100G are possible. Change-Id: I14ab6907b7d8d350b63a083409d45fb9c348a364 Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
2018-10-20dpdk: use rx/tx_offload_names to formatStephen Hemminger1-38/+53
Rather than keeping our own list of offload capabalities, use the function in 18.08 or later to decode the value. Also, introduce a formatter to convert to lower case because DPDK API returns upper case names. Change-Id: I87546fa2bec67f8a8b44288f5994514114cb6faf Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
2018-10-15dpdk: only look at PCI information on PCI devicesStephen Hemminger1-3/+4
The rte_device is use as a base type of all DPDK devices. It is not valid to use container_of to find PCI information unless the bus of the rte_device is pci. Otherwise, the pointer is looking at some other data, which may or may not be zero. This change introduces a helper function to get rte_pci_device pointer. If device is on PCI bus it returns pointer to rte_pci_device info, otherwise it returns NULL. Change-Id: Ia7446006bb93a7a54844969f3b3dd3b918890dfd Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
2018-09-26dpdk: fix QSFP+ module infoDamjan Marion1-1/+2
Change-Id: I89c7df778e66a5d2147190dc99445405d81964e5 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-09-25dpdk: show pluggable info in 'show hardware'Damjan Marion1-0/+28
module: id SFP/SFP+/SFP28, compatibility: 40g_active_cable vendor: Amphenol, part NDCCGF-I202 revision: C, serial: APF1711202351C, date code: 170318 cable length: 2m Change-Id: Ife35607b4f078f7b56737fe066ad4cbd247a7504 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-09-24Trivial: Clean up some typos.Paul Vinciguerra1-1/+1
Change-Id: I085615fde1f966490f30ed5d32017b8b088cfd59 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2018-09-19dpdk: mask and warn if rx/tx offload is not availableDamjan Marion1-70/+86
Warning messsage is displayed in system log: vpp# show log 1970/ 1/ 1 01:00:01:198 warn dpdk unsupported rx offloads requested on port 0: scatter Change-Id: I40021066daf2d37ca5233e3adce55e412f0d3932 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-09-04Fixed showing negative count in stats show CLINaoyuki Mori1-2/+2
Some counters (bytes, pkts) are formatted as signed instead of unsigned in "show hardware-interfaces" and "show lb". These stats counters are declared as u64. Change-Id: Id1b588188bff4e36402beb8d07f779e9a5193956 Signed-off-by: Naoyuki Mori <naoyuki.mori@intel.com>
2018-08-16dpdk: fix rss hash function handlingDamjan Marion1-5/+11
DPDK 18.08 verifies if all set bits are supported and fails if not.... Change-Id: Ia87242fcda11147dff3bebe2e2bef32f0a8891fb Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-08-13dpdk: support for DPDK 18.08Damjan Marion1-8/+0
Change-Id: If1b93341c222160b9a08f127620c024620e55c37 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-07-13Add QEDE poll mode driver (librte_pmd_qede)Igor Mikhailov (imichail)1-0/+4
The driver implements Cavium QLogic FastLinQ QL4xxxx 10G/25G/40G/50G/100G Intelligent Ethernet Adapters (IEA) and Converged Network Adapters (CNA) (doc/guides/nics/qede.rst) Change-Id: If17e8cb572eb8c0585085be1c7cfdfa159eb6e68 Signed-off-by: Igor Mikhailov (imichail) <imichail@cisco.com>
2018-06-26dpdk: display rx/tx burst function name in "show hardware detail"Damjan Marion1-0/+20
Change-Id: I6fa4c6bf9c4e96ba4502a06907bdecc654ace665 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-06-07dpdk: failsafe PMD initialization codeRui Cai1-1/+1
Added code to initialize failsafe PMD This is part of initial effort to enable vpp running over dpdk on failsafe PMD in Microsoft Azure(4/4). Change-Id: Ia2469c7087ca4b5c7881dfb11ec5c4fcebaa1d04 Signed-off-by: Rui Cai <rucai@microsoft.com>
2018-06-07Add support for DPDK 18.05Damjan Marion1-6/+14
Change-Id: I205932bc727c990011bbbe1dc6c0cf5349d19806 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-05-31dpdk: Decoupling the meaning of xd->device_index in dpdk_pluginRui Cai1-10/+11
Prior to the change, dpdk plugin assumes xd->device_index is used both as index for internal dpdk_main->devices array and DPDK port index to call into DPDK APIs. However, when running on top of Failsafe PMDs, DPDK port index range may no longer be contiguous (as noted: http://dpdk.org/ml/archives/dev/2018-March/092375.html for related changes in DPDK). Because this, dpdk plugin can no longer iterate through all available DPDK ports with a for 0->rte_eth_dev_count() loop and the assumption of device_index no longer holds. This is part of initial effort to enable vpp running over dpdk on failsafe PMD in Microsoft Azure(3/4). Change-Id: I416fd80f2d40e12e139f8f3492814da98343eae7 Signed-off-by: Rui Cai <rucai@microsoft.com>
2018-05-30dpdk: rename port_id to *_instance_numDamjan Marion1-2/+2
port_id be used for dpdk port_id Change-Id: Ia7d8cdc5dec2ad658c11f9c0f3ef8005a470ac3c Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-05-29dpdk: Add PMD type for Cavium LiquidIO II CN23XXchuhong yao1-0/+4
1、Adding PMD type for support Cavium LiquidIO II CN23XX NIC; 2、Our company is using VPP + DPDK +Cavium LiquidIO II CN23XX NIC, Unfortunately, the latest VPP code does not support Cavium LiquidIO II CN23XX pci. So I increased the PMD type to support LiquidIO NIC, and can run normally, we most subsequent projects are based on VPP + DPDK + Cavium LiquidIO II CN23XX NIC model, so I hope VPP team can adopt this requirement, thanks a lot. Change-Id: I604ae444d69b37c2e26962bfe4ccdfe983b75041 Signed-off-by: chuhong yao <ych@panath.cn>
2018-05-12dpdk: Add constants for failsafe PMDRui Cai1-1/+10
Adding name, enum constants and formatting code for failsafe PMD. This is part of initial effort to enable vpp running over dpdk on failsafe PMD in Microsoft Azure(2/4). Change-Id: I4eb0093db9f666e2635f7ddff451e3c9064bd0c4 Signed-off-by: Rui Cai <rucai@microsoft.com>
2018-04-25dpdk: complete rework of the dpdk-input nodeDamjan Marion1-6/+6
Change-Id: If174d189de40e6f9ffae99997bba93a2519d9fda Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-04-17dpdk: add additional fields to rte_mbuf trace printDamjan Marion1-2/+5
Change-Id: I3792c524323ce9e300648abe85454cff5d19aba7 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-04-17dpdk: print device flags in the 'show hardware' outputDamjan Marion1-0/+17
Change-Id: I0d10f13a56420b119fdfad97dcc135b245c269e1 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-03-09Coordinate known Ethernet speeds with Linux kernel and DPDKLee Roberts1-0/+16
Linux kernel and DPDK recognize the following Ethernet speeds: 10M, 100M, 1G, 2.5G, 5G, 10G, 20G, 25G, 40G, 50G, 56G and 100G. Add consistent Ethernet speeds to VPP. Change-Id: I4cfcf378fb34425c1206db5aa2f6bdcc66e0a6ab Signed-off-by: Lee Roberts <lee.roberts@hpe.com>
2018-02-15dpdk: add support for DPDK 18.02, deprecate 17.08Damjan Marion1-4/+0
17.11 is still default. Change-Id: I524d232579db8a59c717c5d760398b6b7f811d03 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-01-09Patch ENA PMD to skip setting tx flags in rx pathMatthew Smith1-1/+1
On rx, the ENA PMD sets tx offload flags based on the received packet's l4 protocol. This means you need to turn off those offloads for every packet if you encapsulate packets arriving on an interface using that PMD. Disable this behavior. Change-Id: Icae9f32e3d292d767da440ae5c1280902bdaa083 Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2017-12-14Enable AWS ENA PMDMatthew Smith1-0/+4
Elastic Network Adapter PMD for newer AWS instance types Change-Id: Ic7f6ac4a261ccc7af3ffb2ed8950274532e3feae Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2017-11-21dpdk: add l2_hdr_offset and l3_hdr_offset in vlib_buffer_tDamjan Marion1-2/+2
Change-Id: I0a6d1257e391c3b6f7da6498bd5f7d4c545d17e9 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-11-20dpdk: add support for DPDK 17.11Damjan Marion1-3/+9
Also remove DPDK 17.05 support. Change-Id: I4f96cb3f002cd90b12d800d6904f2364d7c4e270 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-11-16dpdk: add additional data to TX traceDamjan Marion1-2/+7
Change-Id: I02b2b69db1e2afe62e3d3413034feb3bdcb3123e Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-10-04[aarch64] Fixes CLI crashes on dpaa2 platform.Christophe Fontaine1-10/+10
- always use 'va_args' as pointer in all format_* functions - u32 for all 'indent' params as it's declaration was inconsistent Change-Id: Ic5799309a6b104c9b50fec309cba789c8da99e79 Signed-off-by: Christophe Fontaine <christophe.fontaine@enea.com>
2017-09-13devices: Fix coverity discovered 9/13/2017Steven1-0/+1
Missing a break statement in the case Change-Id: I1b1e198748343bc116ee0eaf9012abc3be15c40a Signed-off-by: Steven <sluong@cisco.com>
2017-09-12devices: Display VhostEthernet instead of UnknownEthernet for dpdk net_vhost ↵Steven1-0/+7
driver Added a new macro VNET_DPDK_PORT_TYPE_VHOST_ETHER for dpdk net_vhost driver to display VhostEthernet instead of UnknownEthernet. Change-Id: Ie407d83ebbbd60e4d11be79f0ebc44e2867a5f3b Signed-off-by: Steven <sluong@cisco.com>
2017-08-22dpdk: fix Cavium ThunderX supportDamjan Marion1-0/+4
Change-Id: Id5812448917ce52984d5a778d5b304c448a752e7 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-07-06dpdk: add FiftyGigabitEtherenet interface supportDamjan Marion1-0/+4
Change-Id: Ied8b26179cdf4add34440a9c396cb821716cfb8e Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-05-23Added support for Virtio-user interfaces by means of a new VNET_DPDK_PORT_TYPE.Mohammed Hawari1-0/+8
Change-Id: I101e32cee8d9de51227b39ec2639c9fb44da1e6c Signed-off-by: Mohammed Hawari <mhawari@cisco.com>
2017-05-22dpdk: make dpdk global debug level configurableDamjan Marion1-30/+24
Adds startup.conf knob: dpdk { log-level debug } Change-Id: I80dfbc00559528d7b0970958fba9f08d97aa7118 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-05-15dpdk: improve error handling during device initializationDamjan Marion1-0/+20
Change-Id: Ib390164abb07ca0d38fd49e7e2e6b4e9ea856405 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-05-10dpdk: refactor interface speed detectionDamjan Marion1-0/+8
- Adds VirtualFucntionEthernet for VFs - Enables MLX4 driver Change-Id: I163300e68edbe033227f641bdfcfe5918cbe58cf Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-05-08dpdk: use speed_capa to detect i40e device speedDamjan Marion1-0/+4
Change-Id: I1decca6fb5ce6de74ccbcd5a262ebd3db6f55cdc Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-04-22Fix multicast enable on the bonded interfaceSteve Shin1-1/+1
Multicast enable flag should be set when the bonded interface is up. This flag allows multicast packets to be processed from the slave devices of the bonded interface. Also promiscuous mode for all-multicast should be correctly displayed as part of 'show hardware detail' output. Change-Id: Ief0157c4c030a28afb9c45ebf3d6a12710083724 Signed-off-by: Steve Shin <jonshin@cisco.com>
2017-04-11dpdk: use common interface placement infraDamjan Marion1-1/+1
This pathch deprecates "show dpdk placement" and "set dpdk placement" CLI commands. Change-Id: I4e052ec3e8b8e6c54b4816e1e689e5b7a24892db Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-03-18Fix bonded interface name to use instance number starting from 0John Lo1-2/+2
With DPDK 17.02, bonded interface device_index does not start from 0 and may vary depends on the existence of other interfaces. Implement instance number for bonded interface so the interface name can make use of instance number starting from 0. Change-Id: Ia8eb7bd530446faa02ee7c7d1f6abdc22ac60b62 Signed-off-by: John Lo <loj@cisco.com>
2017-03-01dpdk: be a pluginDamjan Marion1-0/+754
Change-Id: I238258cdeb77035adc5e88903d824593d0a1da90 Signed-off-by: Damjan Marion <damarion@cisco.com>