summaryrefslogtreecommitdiffstats
path: root/src/plugins/dpdk/device/format.c
AgeCommit message (Collapse)AuthorFilesLines
2024-03-12misc: remove GNU Indent directivesDamjan Marion1-2/+0
Type: refactor Change-Id: I5235bf3e9aff58af6ba2c14e8c6529c4fc9ec86c Signed-off-by: Damjan Marion <damarion@cisco.com>
2024-03-05vnet: fix format of deleted sw interfacesVladislav Grishenko1-6/+4
As similar 535364e90459566b603661c3dbe360c72f59ad71 is merged, printing possibly deleted interfaces by index only in all the rest cases. Type: improvement Signed-off-by: Vladislav Grishenko <themiron@yandex-team.ru> Change-Id: I4fa58b382c0279ff893523ba0188fdb9b09e10af
2023-11-06dpdk: correct the printing of Rx offloading flagsJieqiang Wang1-1/+1
DPDK added new Rx checksum flags[1] to handle cases like the virtual drivers. Current check of flags is not strict enough for flags like RTE_MBUF_F_RX_IP_CKSUM_NONE and will always be true no matter the checksum in packet is good or bad. Fix this issue by comparing the result of AND operation with the correspinding Rx checksum flags. Before this patch, packet trace prints the offload flags as below: Packet Offload Flags PKT_RX_IP_CKSUM_GOOD (0x0080) IP cksum of RX pkt. is valid PKT_RX_IP_CKSUM_NONE (0x0090) no IP cksum of RX pkt. PKT_RX_L4_CKSUM_GOOD (0x0100) L4 cksum of RX pkt. is valid PKT_RX_L4_CKSUM_NONE (0x0108) no L4 cksum of RX pkt. After this patch, packet offload flags would be like: Packet Offload Flags PKT_RX_IP_CKSUM_GOOD (0x0080) IP cksum of RX pkt. is valid PKT_RX_L4_CKSUM_GOOD (0x0100) L4 cksum of RX pkt. is valid Type: fix [1] https://github.com/DPDK/dpdk/commit/5842289a546ceb0072bd7faccb93821e21848e07 Signed-off-by: Jieqiang Wang <jieqiang.wang@arm.com> Change-Id: I3182022d9ccd46b2fc55bb3edfbfac9062ed7c89
2023-05-16dpdk: fix format rx/tx burst function name failedXiaoming Jiang1-8/+9
Type: fix Signed-off-by: Xiaoming Jiang <jiangxiaoming@outlook.com> Change-Id: I9971e69135e0652a36e4b4754774a43ea1d92e8b
2023-04-25dpdk: code preparation for bumping to DPDK 22.11Xinyao Cai1-0/+17
This patch prepares code for bumping DPDK version to 22.11, but the DPDK version of this patch keeps at 22.07 for compatibility. the "no-dsa" parameter in DPDK configuration is removed, the "blacklist" parameter can be used to block the related DSA devices. Type: feature Signed-off-by: Xinyao Cai <xinyao.cai@intel.com> Change-Id: I08787c6584bba66383fc0a784963f33171196910
2022-04-05dpdk: macros changes for dpdk 22.03Dastin Wilski1-5/+6
New dpdk version deprecates some macros used by VPP. This patch changes them to 22.03 version. Type: improvement Signed-off-by: Dastin Wilski <dastin.wilski@gmail.com> Change-Id: Ic362ed318dc1ad88bb682ef13fbd6159171fbaef
2022-03-23vppinfra: deprecate clib_mem_is_vecDamjan Marion1-2/+0
Use of clib_mem_is_heap_object is not reliable enough for production use as it relies on just few bytes of memory allocator chunk header. Type: improvement Change-Id: I48c8adde8b6348b15477e3a015ba515eb7ee7ec2 Signed-off-by: Damjan Marion <damarion@cisco.com>
2022-03-23dpdk: fix rx/tx burst function nameTianyu Li1-2/+2
Type: fix Fixes: 65105c95fe03 ("dpdk: improve logging") Signed-off-by: Tianyu Li <tianyu.li@arm.com> Change-Id: I69d616c7e6e7b5395ebf083b1ac5c3e85f99bbdd
2022-01-18vnet: distinguish between max_frame_size and MTUDamjan Marion1-2/+2
Type: improvement Change-Id: I3659de6599f402c92e3855e3bf0e5e3388f2bea0 Signed-off-by: Damjan Marion <damarion@cisco.com>
2022-01-14dpdk: refactor device setupDamjan Marion1-154/+5
Type: improvement Change-Id: I9772088bca176fd0fdb162677ec55c59aa8f3adf Signed-off-by: Damjan Marion <damarion@cisco.com>
2022-01-14dpdk: fix burst function outputDamjan Marion1-3/+3
Type: fix Fixes: 65105c95f Change-Id: I8dee4b560a49891f954d7eb8e79ea535cedeaa88 Signed-off-by: Damjan Marion <damarion@cisco.com>
2022-01-12dpdk: improve loggingDamjan Marion1-10/+35
Type: improvement Change-Id: If61d7409ff14b9f771c1dc8ec9f35e179cea7a28 Signed-off-by: Damjan Marion <damarion@cisco.com>
2022-01-12dpdk: update packet offload flagsDamjan Marion1-13/+40
Type: improvement Change-Id: Ib2c55dd2a246a690b2089f5c0b88508f732281f2 Signed-off-by: Damjan Marion <damarion@cisco.com>
2022-01-12dpdk: always display burst function nameDamjan Marion1-12/+10
Also change the way how we dig function pointer so it works with dpdk 21.11+ Type: improvement Change-Id: I38d5909eea9c2893651710bd45057b1635aa7b37 Signed-off-by: Damjan Marion <damarion@cisco.com>
2022-01-09dpdk: interface capabilities cleanupDamjan Marion1-2/+2
Type: improvement Change-Id: If5636d4376fb06da62f947c28b18c07b6ad21722 Signed-off-by: Damjan Marion <damarion@cisco.com>
2022-01-09dpdk: port type code cleanupDamjan Marion1-70/+10
Type: improvement Change-Id: I4ead18dee249a27b4dbb8bbf53b6238d91042890 Signed-off-by: Damjan Marion <damarion@cisco.com>
2022-01-09dpdk: new mbuf flags in format functionDamjan Marion1-26/+26
Type: improvement Change-Id: I9022e29ebc0edb7946d374d6c3c45ee6962d725f Signed-off-by: Damjan Marion <damarion@cisco.com>
2022-01-08dpdk: new flags formatDamjan Marion1-3/+4
introduced in DPDK 21.11 Type: improvement Change-Id: I8c845949dd904a2bf8fa4a91e2f3ae5d704f2283 Signed-off-by: Damjan Marion <damarion@cisco.com>
2022-01-05dpdk: move port config to single structDamjan Marion1-8/+10
Type: refactor Change-Id: I0bce385c7e391fa2b74646d001980610f80f7062 Signed-off-by: Damjan Marion <damarion@cisco.com>
2022-01-05dpdk: remove unused flagDamjan Marion1-98/+88
Type: refactor Change-Id: Iff96a79323d7d428a779e9736e07c1dc9dddb518 Signed-off-by: Damjan Marion <damarion@cisco.com>
2022-01-05dpdk: remove "convenience" varsDamjan Marion1-1/+2
It is actually longer and slower... Type: refactor Change-Id: I0f126d4cdb13ecc60a2d370409f23820d7f7eb72 Signed-off-by: Damjan Marion <damarion@cisco.com>
2021-09-07dpdk: lro supportMohammed Hawari1-0/+1
Change-Id: Ifa09dcdfd567ac3c2afab4bd3bd468260f766e1d Signed-off-by: Mohammed Hawari <mohammed@hawari.fr> Type: improvement
2021-08-20vlib: add format_vnet_buffer_no_chainBenoît Ganne1-6/+4
- add format_vnet_buffer and format_vnet_buffer_no_chain to mirror format_vlib_buffer and format_vlib_buffer_no_chain - format_vnet_buffer used to be the "no chain" version, replace all of its current use with the corresponding format_vnet_buffer_no_chain - add a function to dump vnet buffer details from gdb Type: improvement Change-Id: I143ce845f80e7ef937ea33a557b6e3b5988c5b8f Signed-off-by: Benoît Ganne <bganne@cisco.com>
2021-07-16dpdk: improve tx offload formattingMohsin Kazmi1-16/+32
Type: improvement Change-Id: I06eaf39b1e441045c3402cbf40339054ad26ade9 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2021-05-27dpdk: bump to 21.05Fan Zhang1-12/+16
Type: feature This patch bumps DPDK version to 21.05 and updated VPP to accomodate the changes in DPDK latest version. Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com> Change-Id: If217441f70c9ab531196dca7ec7a486ec9931cff
2020-12-11dpdk: bump to dpdk 20.11Fan Zhang1-3/+23
Type: feature This patch bumps DPDK to 20.11. In addtion a few changes are made: - Changed dynamic rx offload flag display. - Updated deprecating options. Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com> Change-Id: I6e4399d551a7eb8e1a9fc9ef6e39e74266450ad4
2020-09-08dpdk: fix extended stat stringsChristian Hopps1-2/+2
- These were displaying blank, apparently dpdk extended stat strings must be within the heap so they are identified as vectors by format_c_identifier even though they are not. Type: fix Change-Id: I2b153b100203b9856ce3af6d5ecb2daae410fb5b Signed-off-by: Christian Hopps <chopps@labn.net>
2020-07-16vppinfra: fix format_c_identifier vector overflowBenoît Ganne1-4/+2
In case of vector, we must check length before trying to access element. Also fix wrong DPDK plugin workaround. Type: fix Change-Id: I2ecef1c88ebef2362f48cab0d462699aa43cd4b9 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2020-04-28flow: add RSS supportChenmin Sun1-24/+2
This patch enables the RSS configuration through vnet/flow interface With this RSS feature, users can config the RSS functions for specific flows Currently, it supports: default, toeplitz and symmetric_toeplitz rss function, and ipv4-tcp/ipv4-udp/ipv6-tcp/ipv6-ucp flow types Users can use the following options to combine with above flow types for more specific hash input set selection: l3-src-only, l3-dst-only, l4-src-only, l4-dst-only Command line: test flow add dst-ip any proto udp rss function default rss types ipv4-tcp use l3-dst-only test flow add dst-ip any proto udp rss function toeplitz rss types ipv4-udp use l4-src-only test flow add dst-ip any proto udp rss function symmetric_toeplitz rss types ipv6-udp use l3-src-only and l3-dst-only Type: feature Signed-off-by: Chenmin Sun <chenmin.sun@intel.com> Change-Id: I213efc76dc8af37f2f63605884f353e05b0f5d2a
2020-04-27vlib: deprecate i2c and cjDave Barach1-1/+0
i2c follows its only use case - the original 82599 driver - into extras/deprecated. cj is/was an emergency debug tool unused in several years. Move to extras/deprecated/vlib Type: refactor Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: Ib55b65373f62630db295c562974bd8f2456c3107
2020-03-27dpdk: enable DPDK iAVF PMDChenmin Sun1-0/+4
This patch adds support for the DPDK iAVF PMD Type: feature Signed-off-by: Chenmin Sun <chenmin.sun@intel.com> Change-Id: I7bb0f621774e4c55b9b7309462e6591ce1b88fb6
2020-03-12dpdk: tx/rx burst function description refactorChenmin Sun1-6/+31
DPDK provides two new APIs to retrieve information about the Tx/Rx packet burst mode: rte_eth_tx_burst_mode_get rte_eth_rx_burst_mode_get This patch leverages these two APIs to describe the tx/rx mode. Currently, Intel X710/E810 and Mellanox Mlx5 support the new APIs. For NICs that don't support the new APIs, still use the original way to print their tx/rx function name Type: refactor Signed-off-by: Chenmin Sun <chenmin.sun@intel.com> Change-Id: Ibe47f5debe3b3f17f462fbf9834394e22845cc08
2020-02-05dpdk: output switch informationHaggai Eran1-0/+21
Type: feature Output DPDK switch information to allow finding out which DPDK ports are associated with which DPDK representor ports. Signed-off-by: Haggai Eran <haggai.eran@gmail.com> Change-Id: I612cbd5a97e04787eca13423f53c7283d5945e37
2020-01-30misc: deprecate dpdk hqosDamjan Marion1-19/+0
Not in functional state for a long time ... Type: refactor Change-Id: I2cc1525a6d49518cbc94faf6afbf0d2d0d515f56 Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-12-17dpdk: add devargs supportChenmin Sun1-0/+3
Type: feature This patch adds the devargs support for dpdk device The devargs are used as hardware-specific init args for dpdk devices please refer to the nic guides under $(DPDK_DIR)/doc/guides/nics/$(NIC_DRIVER).rst Signed-off-by: Chenmin Sun <chenmin.sun@intel.com> Change-Id: Id380d04720090bb66afe5ce09d664e5e248b8eb9
2019-11-14dpdk: Enable bnxt PMDAndy Gospodarek1-0/+4
This adds support to compile the bnxt PMD that supports Broadcom's 10/25/40/50/100/200 Gbps NICs. Tested with modified DPDK driver on x86_64 and aarch64 targets that is pending upstream acceptance, but should compile just fine today. Type: feature Signed-off-by: Andy Gospodarek <gospo@broadcom.com> Change-Id: I735a991c4cae4fa77e5605094facea54b781a1db
2019-09-05dpdk: fix extended statsFilip Tehlar1-1/+1
Extended stats are not displayed due to incorrect condition. Type: fix Change-Id: Ie04664e6274137462dce832bf7ee06204cd77be5 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2019-08-06dpdk: remove SFP eeprom dump from 'show hardware-interfaces' and 'show ↵Lijian.Zhang1-2/+5
hardware-interfaces verbose' Type: fix It's time-consuming to execute 'show hardware-interfaces detail' in CSIT script. 'show hardware-interfaces' dumps SFP eeprom, via a software emulated I2C bus. Currently 'show hardware-interfaces', 'show hardware-interfaces verbose' and 'show hardware-interfaces detail' give exactly the same output, and they all will dump SFP eeprom. Will move the SFP eeprom dump to 'show hardware-interfaces detail' only, and use “show hardware-interfaces verbose” in CSIT script to save time. Change-Id: I1a6e5a0ca5fce5b4f0b9a6eb4e9dfd76d45b2487 Signed-off-by: Lijian Zhang <Lijian.Zhang@arm.com>
2019-06-06dpdk: fix clear hw statsFilip Tehlar1-2/+2
.. and remove helper stat struct for keeping last cleared stats. This is not needed anymore as dpdk lib provides rte_eth_dev_reset(). Change-Id: I78076e689aac7ca70836ce688dfa8e704f64cd84 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2019-06-04dpdk: rework extended statsFilip Tehlar1-22/+19
Change-Id: I421192e1921d4c9c5486a6dcca745582aebf4e3e Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2019-05-30dpdk: remove bonding codeDamjan Marion1-7/+0
We have native implementation and we should not maintain both.... Change-Id: Ic09ebffda52cdc733b3cfeff06690e0d3cc08084 Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-05-27dpdk: fix rss configuration error issueChenmin Sun1-7/+5
Reorder foreach_dpdk_rss_hf to fix rss configuration error issue. Change-Id: Idec45534cd7dfe810b25584b1b27ac52b1c45110 Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
2019-03-14dpdk: Add E810 family supportChenminSun1-0/+4
Change-Id: Id5b30d7a394551844a79b3d222d2d26194d033df Signed-off-by: ChenminSun <chenmin.sun@intel.com>
2019-03-12dpdk: pass log-level configuration to EALStephen Hemminger1-24/+0
The log-level dpdk config value should be transparently forwarded to DPDK via EAL argument. Since DPDK now supports naming log-levels, VPP no longer needs to parse and call rte_set_loglevel(). This was the other part of the DPDK log-level change. It must have got missed during my initial checkin. Without it passing dynamic log-level values like are silently ignored. Fixes: 6ca6ac6c887e ("dpdk: support passing log-level") Change-Id: I732cec5f638c9924e3ffb04c4753f957e3633d64 Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
2019-01-13dpdk: show hardware may display the wrong information for rss activeSteven1-0/+1
Some dpdk driver does not support rte_eth_dev_rss_hash_conf_get. When that happens, we display whatever that was in the stack variable for rss_hf which is confusing. The fix is to clear rss_hf prior to the call. Before the fix -------------- DBGvpp# sh hard Name Idx Link Hardware format_dpdk_device:599: rte_eth_dev_rss_hash_conf_get returned -95 GigabitEthernet13/0/0 2 up GigabitEthernet13/0/0 Link speed: 10 Gbps Ethernet address 00:0c:29:c4:8c:eb VMware VMXNET3 ... rss avail: ipv4 ipv4-tcp ipv6 ipv6-tcp rss active: ipv4 ipv4-frag ipv4-tcp ipv4-udp ipv4-other After the fix ------------- DBGvpp# sh hard Name Idx Link Hardware format_dpdk_device:600: rte_eth_dev_rss_hash_conf_get returned -95 GigabitEthernet13/0/0 2 up GigabitEthernet13/0/0 Link speed: 10 Gbps Ethernet address 00:0c:29:c4:8c:eb VMware VMXNET3 .. rss avail: ipv4 ipv4-tcp ipv6 ipv6-tcp rss active: none Change-Id: If8f8327f0012eecc8d23cd7f3f9cc581ca025654 Signed-off-by: Steven <sluong@cisco.com>
2018-11-28dpdk: allow interface name to be specified from startup.confDamjan Marion1-0/+3
Example: dpdk { dev 0000:01:00.0 { name eth0 } dev 0000:02:00.0 { name eth1 } } Change-Id: I11e60e969a7e3548c99ac0c0c3531767819cb157 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-11-08vnet: store hw interface speed in kbps instead of using flagsDamjan Marion1-2/+2
Change-Id: Idd4471a3adf7023e48e85717f00c786b1dde0cca Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-11-06dpdk: format_dpdk_device_name cleanupDamjan Marion1-7/+7
Change-Id: I49a5029d256df8f749ee30d19ff7473147b6516f Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-11-06dpdk: fix device name suffix confusion with failsafe/netvscStephen Hemminger1-2/+2
When netvsc or failsafe DPDK device is used, the DPDK port id does not match the VPP device instance id. The code that formats the device name was incorrectly calling DPDK device info using the VPP device instance id. This causes the VPP interface to be named "FortyGigabit0/2/0" based on mistakenly finding the PCI device information of the hidden DPDK port id for the VF device. Change-Id: I9366232f4b2087076bdcc1a58bf228007c24c084 Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
2018-11-06dpdk: fix pmd device type when using netvsc or failsafeStephen Hemminger1-1/+1
The pmd device type show with 'show hardware' is wrong if using failsafe (or netvsc pmd) because the pmd device type should be based of the VPP device instance, not the DPDK port id. Fixes: a059a000f81a ("dpdk: Decoupling the meaning of xd->device_index in dpdk_plugin") Change-Id: I3880fe674731880c5706a21d8ef3ccf8d569d46d Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>