Age | Commit message (Collapse) | Author | Files | Lines |
|
interface)"
This reverts commit 70083ee74c3141bbefb185525315f1b34497dcaa.
Reverting as this patch is causing following crash:
0: /home/damarion/cisco/vpp3/build-data/../src/vnet/devices/devices.h:131 (vnet_get_device_input_thread_index) assertion `queue_id < vec_len (hw->input_node_thread_index_by_queue)' fails
Aborted
Change-Id: Ie2a365032110b1f67be7a9d832885b9899813d39
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I98bd454a761a1032738a21edeb0fe847e801f901
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Change-Id: Iacb32e6e855f7b77108154d956ef27ee141bbde0
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Linux kernel and DPDK recognize the following Ethernet speeds:
10M, 100M, 1G, 2.5G, 5G, 10G, 20G, 25G, 40G, 50G, 56G and 100G.
Add consistent Ethernet speeds to VPP.
Change-Id: I4cfcf378fb34425c1206db5aa2f6bdcc66e0a6ab
Signed-off-by: Lee Roberts <lee.roberts@hpe.com>
|
|
Change-Id: I1d3ede2b043e1fd4abc54f540bb1d3ac9863016e
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
ENA doesn't support scatter-gather. The PMD started
failing rte_eth_dev_rx_queue_config() in DPDK 18.02
if the flag to enable it is set. Turn the flag off in
dpdk_lib_init().
Change-Id: Ifdd9f188c89b46efe82412c75fb935a92436da1c
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Problem: rte_eth_dev_set_mtu() returns with failure from ThunderX NICVF
DPDK PMD driver which supports MTU less than ETHERNET_MAX_PACKET_BYTES.
rte_eth_dev_set_mtu() being called twice from dpdk_lib_init(): one via
dpdk_device_setup() and second in dpdk_lib_init() itself. Currently
dpdk_lib_init() passes vnet_hardware_interface->max_packet_bytes as an
argument to rte_eth_dev_set_mtu() without consulting dev_info.max_rx_pktlen.
NICs like i4oe, ixgbe can support MTU much greater than 9216 hence its not
a problem for those NICS.
Fix: This patch calculates dpdk_device->port_conf.rxmode.max_rx_pkt_len,
vnet_hardware_interface->max_packet_bytes and MTU by consulting
dev_info.max_rx_pktlen.
Change-Id: If04bbfae49ee971dac0063ff1835e4a9c3087865
Signed-off-by: Nitin Saxena <nitin.saxena@cavium.com>
|
|
Change-Id: Icd2184dec16d30cdcc689ca37c834b5df2f0a1a3
Signed-off-by: Eyal Bari <ebari@cisco.com>
|
|
Change-Id: I853386aebfe488ebb10328435b81b6e3403c5dd0
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I1699e440052faa317b06d46692e8656a41d21bfe
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: Ib4012ff598698924484525932d041988cc4c63f6
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Elastic Network Adapter PMD for newer AWS instance types
Change-Id: Ic7f6ac4a261ccc7af3ffb2ed8950274532e3feae
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Also fixes old ixge driver, so it works with recent physmem changes and
vfio.
Change-Id: Id4be74b34daed47cd281a77eec43d6692340d882
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
unify code from both branches
Change-Id: Iae7325cff8c799c7827727ad7465bec089e39f50
Signed-off-by: Eyal Bari <ebari@cisco.com>
|
|
Change-Id: I31d2cbb02a0f59603ef1adc0d185e3d775dfda2f
Signed-off-by: Eyal Bari <ebari@cisco.com>
|
|
Change-Id: Ic43c70bfe3e93cb3e6cfab7cda1986e44e371c06
Signed-off-by: Eyal Bari <ebari@cisco.com>
|
|
Add legacy and modern macros to pci_config header.
This follows dpdk commit: 4c7903658f6b5a8f4901224ef405445541b91e4a
And PCI Device Conformance doc :
docs.oasis-open.org/virtio/virtio/v1.0/cs02/virtio-v1.0-cs02.html#x1-640001
Change-Id: Iacd40ea8c06f220736ca0bc7ce68bcf1e55b68f6
Signed-off-by: Gabriel Ganne <gabriel.ganne@enea.com>
|
|
Change-Id: I3713b4c460a3cd414b560e16aac054aee2e1181b
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
New startup.conf knob:
dpdk { ... no-tx-checksum-offload ... }
Change-Id: I337fd57616dd77687300861b411b420a3cb75149
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I0a6d1257e391c3b6f7da6498bd5f7d4c545d17e9
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Also remove DPDK 17.05 support.
Change-Id: I4f96cb3f002cd90b12d800d6904f2364d7c4e270
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
- Global variables declared in header files without
the use of the 'extern' keword will result in multiple
instances of the variable to be created by the compiler
-- one for each different source file in which the
the header file is included. This results in wasted
memory allocated in the BSS segments as well as
potentially introducing bugs in the application.
Change-Id: I6ef1790b60a0bd9dd3994f8510723decf258b0cc
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
|
|
This allows us to have single contignuous allocation for DPDK buffers
with single mmap FD, so buffer memory can be easily shared with diffrent
process.
As a consequence dpdk socket-mem is no longer in charge for allocating
buffer memory, but still we need some space allocated for dpdk
structures so default socket-mem is reduced form 256 to 64 MB.
For a default of 16K buffers per numa node, physmem allocation is now
40MB, so basically this change reduces footprint from 256MB per socket
to 48 (64 + 40).
Change-Id: Ic8cfe83930a18411545b37a12b14aac89affd04f
Signed-off-by: Damjan Marion <damarion@cisco.com>
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
UIO binding is not required for Mellanox NIC and calling vlib_pci_bind_to_uio()
should be skipped.
Change-Id: I10ea457bc3c8d4be8117dec51d5bd940ee416a44
Signed-off-by: Steve Shin <jonshin@cisco.com>
|
|
Change-Id: I83ea1eae73cb41353cacd1c1b910339d10900502
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: Iff33694fc42cc3bcc73cf1372339053a6365039c
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
driver
Added a new macro VNET_DPDK_PORT_TYPE_VHOST_ETHER for dpdk net_vhost driver
to display VhostEthernet instead of UnknownEthernet.
Change-Id: Ie407d83ebbbd60e4d11be79f0ebc44e2867a5f3b
Signed-off-by: Steven <sluong@cisco.com>
|
|
Add support for Mellanox provider id and vendor id
Change-Id: Ib2451e69fbe949f01bcb1ee556aa3020da225610
Signed-off-by: Shachar Beiser <shacharbe@mellanox.com>
|
|
Change-Id: Id79d2c2be7a98e15416a537c890a8f2dd6d4464d
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
This patch adds supprot support for multiple numa-aware physmem regions.
Change-Id: I5c69a6f4da33c8ee21bdb8604d52fd2886f2327e
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I674fb1212e48693939045523df085326a4dd1809
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
New startup config command:
unix {
runtime-dir /run/vpp
}
Also, adds recursive mkdir funtion for use in deifferent places
like cli-config socket path and dpdk hugepage directory path.
Change-Id: I1446ceab9c220c25804e73a743a3ebb383450124
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: Id5812448917ce52984d5a778d5b304c448a752e7
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I2cb6ce4e29813f6602b14e6e61713fb381fbcef8
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: I123eccea98abafeb31f25d2a162501e2eded60d4
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
- vnet_buffer_pool_create should probably be named
dpdk_buffer_pool_create since that is what it does.
- Its prototype should also be in a DPDK plugin header, not in
vlib/buffer_funcs.h, since the implementation is in the plugin
and nobody else should be calling it.
Change-Id: I7ba259afa4b888bc94f3ad257305e286b41e7370
Signed-off-by: Chris Luke <chrisy@flirble.org>
|
|
LLDP packets are dropped at interface output node if each slave's link
is configured as the LLDP interface. The admin state is configured and
managed by the bonded interface, so slave link's state is down by default.
The checking for the admin state UP should be ignored for the slave link.
Change-Id: I06ca250f42fcb8cc50e0ea3a3817a2c5b56865df
Signed-off-by: Steve Shin <jonshin@cisco.com>
|
|
Change-Id: Ied8b26179cdf4add34440a9c396cb821716cfb8e
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change https://gerrit.fd.io/r/#/c/7230/ added a Unix domain
CLI socket in the default startup.conf; however unless you
had previously run VPP with the DPDK plugin enabled the
directory that it is created in. /run/vpp, would not exist
and startup would fail. This directory is typically hosted
in a tmpfs ramdisk and is thus ephemeral.
This patch adds a function that attempts to mkdir VPP_RUN_DIR
and uses it in both the DPDK plugin and the CLI code if the
CLI socket is to be created in that directory.
Change-Id: Ibbf925819099dce2b5eb0fa238b9edca1036d6fd
Signed-off-by: Chris Luke <chrisy@flirble.org>
|
|
If a bonded interface is in active-backup mode and configured with
IPv4 and/or IPv6 addresses, on slave interface link up/down, send
a GARP packet if configured with an IPv4 address and an unsolcited
NA if configured with an IPv6 address. These packets can help with
faster route convergence in the next hop router/switch.
Change-Id: I68ccb11a4a40cda414704fa08ee0171c952befa2
Signed-off-by: John Lo <loj@cisco.com>
|
|
Change-Id: I101e32cee8d9de51227b39ec2639c9fb44da1e6c
Signed-off-by: Mohammed Hawari <mhawari@cisco.com>
|
|
Adds startup.conf knob:
dpdk {
log-level debug
}
Change-Id: I80dfbc00559528d7b0970958fba9f08d97aa7118
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I60a7795761fe74ae5d57dacd03c343ddb77434d4
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: Ib390164abb07ca0d38fd49e7e2e6b4e9ea856405
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I19744387859129c6b8dc104041af158bf5f1d988
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
- Adds VirtualFucntionEthernet for VFs
- Enables MLX4 driver
Change-Id: I163300e68edbe033227f641bdfcfe5918cbe58cf
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I0fec86914ec027383ff511b7092beac2363f55f7
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I1decca6fb5ce6de74ccbcd5a262ebd3db6f55cdc
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: Ib506c3e9d66170f29e3266ad6dc4d32b829befba
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I16dcc0de2553c6c1eb87dd1ec4c8d3c649e6f285
Signed-off-by: Damjan Marion <damarion@cisco.com>
|