aboutsummaryrefslogtreecommitdiffstats
path: root/src/plugins/dpdk/device/init.c
AgeCommit message (Collapse)AuthorFilesLines
2024-04-24dpdk: remove dead codeDamjan Marion1-9/+0
Type: improvement Change-Id: I888f29e1ff15c5aa59a2a74dc0b2a818baf0bfde Signed-off-by: Damjan Marion <damarion@cisco.com>
2024-04-24dpdk: Use FreeBSD specific values for network interface classesTom Jones1-0/+10
The PCI class values used to identify devices are different between platforms. Add a selector for the values used on FreeBSD. Type: improvement Change-Id: I981f0dc24954457068fc94bcc4681b120ee253db Signed-off-by: Tom Jones <thj@freebsd.org>
2024-04-24dpdk: Only use vmbus on LinuxTom Jones1-1/+5
Type: improvement Change-Id: If181c4bfd7fc93583a608d478bd070930c853f52 Signed-off-by: Tom Jones <thj@freebsd.org>
2024-03-12misc: remove GNU Indent directivesDamjan Marion1-8/+0
Type: refactor Change-Id: I5235bf3e9aff58af6ba2c14e8c6529c4fc9ec86c Signed-off-by: Damjan Marion <damarion@cisco.com>
2024-03-05dpdk: correct waiting timesGeorgy Borodin1-7/+49
When link state interval is 3 and stats interval is 10, updates for stats will be made every 12 seconds (next number after 10, that divisible by 3). And if you get counters every 30 secs, you will get ideal "saw"-line instead of real smooth chart. This commit makes smooth line on stats intervals that are divisors of the charts update interval (regardless of link state interval), and makes it possible to configure them. Type: fix Fixes: cb9cadad578297ffd78fa8a33670bdf1ab669e7e Change-Id: Ia4350467be2b0ec0c1be37c7fda63f43b3330f44 Signed-off-by: Georgy Borodin <bor1-go@yandex-team.ru>
2024-01-16dpdk: add ID for QAT 4xxx series VF supportKai Ji1-1/+2
Type: feature Enable use of 4th gen QAT series devices. Change-Id: I890c1f1d305ff9b996322c29e9510cfe89d88d97 Signed-off-by: Kai Ji <kai.ji@intel.com>
2024-01-16dpdk: fix log_debug message formatGeorgy Borodin1-1/+1
debug+asan build will fail on initialisation when log level==debug Type: fix Fixes: 549838c81bd0d995f2b8569955afc33132582c77 Change-Id: Ic64b376727d49f89790fb29bd03a0a2520625cdc Signed-off-by: Georgy Borodin <bor1-go@yandex-team.ru>
2023-12-08dpdk: never override devname if set via configPeter Morrow1-5/+6
Even if the device name is specified in the startup config it may be appended to if the device is a switch domain member. This leads to unexpected device naming if an explicit device name was requested. Type: fix Change-Id: Ib56b4ac41c17008db55dc69497721e3cb7d540c1 Signed-off-by: Peter Morrow <pdmorrow@gmail.com>
2023-10-12dpdk: add Mellanox BlueField NICsAlexander Kozyrev1-0/+12
List BlueField NICs as a supported PCI devices. Type: feature Change-Id: Ida2300df516ab9cd2fcde1f816bbdc081016039a Signed-off-by: Alexander Kozyrev <akozyrev@nvidia.com>
2023-09-28dpdk: add ConnectX-6LX and ConnectX-7 supportAlexander Kozyrev1-3/+9
List Mellanox ConnectX-6LX and ConnectX-7 as a supported PCI devices. Type: feature Change-Id: Ieeca3f214d08f29238c387354055ac1320cab75f Signed-off-by: Alexander Kozyrev <akozyrev@nvidia.com>
2023-05-15dpdk: Be wary of the return value from rte_eth_dev_socket_idSteven Luong1-1/+7
Prior to dpdk-22.11, VPP can count on rte_eth_dev_socket_id to return numa node 0 if the device didn't set it. Ever since below patch is committed in dpdk https://patchwork.dpdk.org/project/dpdk/patch/20220929120512.480-1-olivier.matz@6wind.com/#152498 the aforementioned assumption is no longer true. If the device didn't set the numa node, VPP gets -1 from the aforementioned API call. This causes VPP to crash. This fix is to set the numa node to 0 if the API returns -1, or SOCKET_ID_ANY Type: fix Change-Id: I2fde2870e5a3eb98473fe8d119fef594bfba9a8d Signed-off-by: Steven Luong <sluong@cisco.com>
2023-04-25dpdk: code preparation for bumping to DPDK 22.11Xinyao Cai1-12/+6
This patch prepares code for bumping DPDK version to 22.11, but the DPDK version of this patch keeps at 22.07 for compatibility. the "no-dsa" parameter in DPDK configuration is removed, the "blacklist" parameter can be used to block the related DSA devices. Type: feature Signed-off-by: Xinyao Cai <xinyao.cai@intel.com> Change-Id: I08787c6584bba66383fc0a784963f33171196910
2023-03-14dpdk: enable Google Virtual EthernetMarvin Liu1-0/+3
Recognize and drive google virtual ethernet (gve) in google cloud. Type: feature Signed-off-by: Marvin Liu <yong.liu@intel.com> Change-Id: Ia559615ac059cabbca5d10bcd4049e87beaad638
2023-03-06dpdk: plugin init should be protect by thread barrierXiaoming Jiang1-0/+2
Witout thread barrier, when dpdk_process_node initiating dpdk lib, workers thread may also be initiating. Main and workers threads may both setting error_main info, that will cause memory ASAN issue. Type: fix Signed-off-by: Xiaoming Jiang <jiangxiaoming@outlook.com> Change-Id: I87b73b310730719035d4985a2cff2e3308120ec2
2023-01-26dpdk: add intf tag to dev{} subinputNathan Skrzypczak1-0/+5
This patch allows to pass a tag when specifying the dpdk `dev { }` interface configuration. It allows a control plane generating a vpp.conf file to retreive the resulting mapping between dpdk interfaces & sw_if_indices in VPP without having to change the interface name exposed to the user. Type: feature Change-Id: I55907417de0083b82d4a127172816cec3459acf3 Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
2023-01-11pci: add option to force uio bindingBenoît Ganne1-1/+4
Type: improvement Change-Id: Ifea4badd58f7e2b5e792d7506f6747851a08587f Signed-off-by: Benoît Ganne <bganne@cisco.com>
2022-10-24dpdk: add Intel QAT 200xx series supportVladimir Ratnikov1-1/+2
Type: feature Signed-off-by: Vladimir Ratnikov <vratnikov@netgate.com> Change-Id: I2fd1e321983ac5caa03aac8705dfc596985c35f7
2022-08-25vlib: introduce DMA infrastructureMarvin Liu1-0/+10
This patch introduces DMA infrastructure into vlib. This is well known that large amount of memory movements will drain core resource. Nowadays more and more hardware accelerators were designed out for freeing core from this burden. Meanwhile some restrictions still remained when utilizing hardware accelerators, e.g. cross numa throughput will have a significant drop compared to same node. Normally the number of hardware accelerator instances will less than cores number, not to mention that applications number will even beyond the number of cores. Some hardware may support share virtual address with cores, while others are not. Here we introduce new DMA infrastructure which can fulfill the requirements of vpp applications like session and memif and in the meantime dealing with hardware limitations. Here is some design backgrounds: Backend is the abstract of resource which allocated from DMA device and can do some basic operations like configuration, DMA copy and result query. Config is the abstract of application DMA requirement. Application need to request an unique config index from DMA infrastructure. This unique config index is associated with backend resource. Two options cpu fallback and barrier before last can be specified in config. DMA transfer will be performed by CPU when backend is busy if cpu fallback option is enabled. DMA transfer callback will be in order if barrier before last option is enabled. We constructs all the stuffs that DMA transfer request needed into DMA batch. It contains the pattern of DMA descriptors and function pointers for submission and callback. One DMA transfer request need multiple times batch update and one time batch submission. DMA backends will assigned to config's workers threads equally. Lock will be used for thread-safety if same backends assigned to multiple threads. Backend node will check all the pending requests in worker thread and do callback with the pointer of DMA batch if transfer completed. Application can utilize cookie in DMA batch for selves usage. DMA architecture: +----------+ +----------+ +----------+ +----------+ | Config1 | | Config2 | | Config1 | | Config2 | +----------+ +----------+ +----------+ +----------+ || || || || +-------------------------+ +-------------------------+ | DMA polling thread A | | DMA polling thread B | +-------------------------+ +-------------------------+ || || +----------+ +----------+ | Backend1 | | Backend2 | +----------+ +----------+ Type: feature Signed-off-by: Marvin Liu <yong.liu@intel.com> Change-Id: I1725e0c26687985aac29618c9abe4f5e0de08ebf
2022-07-18dpdk: fix mlx5 dpdk init with no-multi-segTianyu Li1-1/+2
Build vpp with MLX DPDK PMD, make DPDK_MLX4_PMD=y DPDK_MLX5_PMD=y DPDK_MLX5_COMMON_PMD=y build-release With no-multi-seg in startup.conf, Mellanox NIC init failed with following message, rte_eth_rx_queue_setup[port:2, errno:-12]: Unknown error -12 mlx5_net: port 2 Rx queue 0: Scatter offload is not configured and no enough mbuf space(2176) to contain the maximum RX packet length(2065) with head-room(128) In Mellanox NIC PMD driver, 'di.max_rx_pktlen' is returned as 65536, and 'di.max_mtu' is returned as 65535, which makes the driver_frame_overhead logic not suitable for Mellanox NICs. So skip the logic code if MAX_MTU is returned as 65535. Type: fix Fixes: 1cd0e5dd533f ("vnet: distinguish between max_frame_size and MTU") Signed-off-by: Tianyu Li <tianyu.li@arm.com> Change-Id: I027b76b8d07fb453015b8eebb36d160b4bc8df9c
2022-07-08dpdk: add ID for 4xxx QAT VFMatthew Smith1-3/+5
Type: improvement Enable use of 4th gen QAT devices. Will be available on Sapphire Rapids. Signed-off-by: Matthew Smith <mgsmith@netgate.com> Change-Id: I89e7d29e10ecb4c36c700ff5e017796161ec6c5e
2022-05-23dpdk: fix update link stateAlexander Skorichenko1-18/+13
Type: fix Correct vnet_hw_interface_t flags update on link state changes. Currently incomplete set of flags is applied on each change, only flags related to the most recent change are being set correct. E.g. setting the link up would erase the duplex part of the flags. Signed-off-by: Alexander Skorichenko <askorichenko@netgate.com> Change-Id: I5b95e1c0eaea0c283b108dbf7f809682ec9064eb
2022-05-17interface: fix overflow of link speed.Anton Nikolaev1-1/+3
Type: fix There were several places where mbps were converted to kbps for link_speed, but often drivers of devices set link speed to unknown (0xFFFFFFFF) on initialization, so there was multiplication of link_speed equal 0xFFFFFFFF(UINT32_MAX) by 1000, this provides overflow of unsigned int, and as result link_speed was equal 4295 Gbps, but actually link_speed is unknown. Signed-off-by: Anton Nikolaev <anikolaev@netgate.com> Change-Id: Ib462ed6ed685654af4687041e115bfb74e640f13
2022-04-08dpdk: add multi-txq supportMohsin Kazmi1-0/+16
Type: improvement Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com> Change-Id: I9f061a05d947bc2867e1b962bf0522ad344bcc1a
2022-04-05dpdk: macros changes for dpdk 22.03Dastin Wilski1-15/+16
New dpdk version deprecates some macros used by VPP. This patch changes them to 22.03 version. Type: improvement Signed-off-by: Dastin Wilski <dastin.wilski@gmail.com> Change-Id: Ic362ed318dc1ad88bb682ef13fbd6159171fbaef
2022-04-05dpdk: fix max frame sizeDamjan Marion1-1/+2
Type: fix Change-Id: I70f9ec2eb6c9c1494a4ecd56e06898f6162a0e0e Signed-off-by: Damjan Marion <damarion@cisco.com>
2022-04-04vppinfra: make _vec_len() read-onlyDamjan Marion1-2/+2
Use of _vec_len() to set vector length breaks address sanitizer. Users should use vec_set_len(), vec_inc_len(), vec_dec_len () instead. Type: improvement Change-Id: I441ae948771eb21c23a61f3ff9163bdad74a2cb8 Signed-off-by: Damjan Marion <damarion@cisco.com>
2022-04-01dpdk: fix coverity issueFan Zhang1-13/+4
Type: fix This patch fixes the following DPDK plugin issue: CID 253333: Control flow issues (DEADCODE) The change also includes some cosmetic changes for error handling. Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com> Change-Id: I830020bc3ae9a508f3a905f78333fa3ae25ce784
2022-03-29dpdk: make log pipe non-blocking on both sidesDamjan Marion1-1/+2
Type: fix Change-Id: I857403b9d93ee4c17f2dd5ac8e6dafd66260a252 Signed-off-by: Damjan Marion <damarion@cisco.com>
2022-03-23dpdk: copy the enable_rxq_int flag from driver to confPaul Atkins1-0/+1
The support for interrupt mode is not being respected as it is not copied into the driver conf, which is what is checked when trying to enable it. Type: fix Signed-off-by: Paul Atkins <patkins@graphiant.com> Change-Id: I2e502306e27bd98f8037d1a0a396201e099b50b5
2022-02-18dpdk: support devargs for vmbusVladimir Ratnikov1-19/+29
Type: feature Signed-off-by: Vladimir Ratnikov <vratnikov@netgate.com> Change-Id: I2fd12a5b30aacdbaecb9156b829bfc06dfea377f
2022-01-20dpdk: fix compilation for DPDK < 21.11Benoît Ganne1-0/+3
Type: fix Change-Id: Ic5b74fb7a8e479e8cdccbb6a564ff3fdd299455c Signed-off-by: Benoît Ganne <bganne@cisco.com>
2022-01-18dpdk: limit number of TX queues to max supportedDamjan Marion1-3/+17
Also improve logging.... Type: fix Change-Id: I3d3aee52cd45e59ecd6ce13bd516c66559638fec Signed-off-by: Damjan Marion <damarion@cisco.com>
2022-01-18vnet: distinguish between max_frame_size and MTUDamjan Marion1-3/+23
Type: improvement Change-Id: I3659de6599f402c92e3855e3bf0e5e3388f2bea0 Signed-off-by: Damjan Marion <damarion@cisco.com>
2022-01-17interface: improve MTU handlingDamjan Marion1-9/+37
- per hw-interface-class handlers - ethernet set_mtu callback - driver can now refuse MTU change Type: improvement Change-Id: I3d37c9129930ebec7bb70caf4263025413873048 Signed-off-by: Damjan Marion <damarion@cisco.com>
2022-01-14dpdk: refactor device setupDamjan Marion1-305/+147
Type: improvement Change-Id: I9772088bca176fd0fdb162677ec55c59aa8f3adf Signed-off-by: Damjan Marion <damarion@cisco.com>
2022-01-12dpdk: bump to DPDK v21.11Damjan Marion1-8/+1
Type: feature This patch bumps dpdk version from 21.08 to 21.11 Change-Id: Id37fdba75f1ea4f4eac3c92226f3b1c539e1daca Signed-off-by: Dastin Wilski <dastin.wilski@gmail.com> Signed-off-by: Damjan Marion <damarion@cisco.com>
2022-01-12dpdk: postpone updating runtime dataDamjan Marion1-1/+3
This prevents crash due to worker tread accessing device data while device vector is growing. Type: fix Change-Id: I5cf9f53ddbe97fe52db8fd431ea7c0e480f3d4bc Signed-off-by: Damjan Marion <damarion@cisco.com>
2022-01-12dpdk: use blunt force to skip irrelevant and confusing logsDamjan Marion1-1/+13
Type: improvement Change-Id: I2cd37f0c1a1ed33438bfa4b7590e5609e5094fc8 Signed-off-by: Damjan Marion <damarion@cisco.com>
2022-01-11dpdk: offloads cleanupDamjan Marion1-166/+33
Type: improvement Change-Id: Ibf43aa483548e6055e4b851ad893371d7af3b018 Signed-off-by: Damjan Marion <damarion@cisco.com>
2022-01-09dpdk: interface capabilities cleanupDamjan Marion1-16/+1
Type: improvement Change-Id: If5636d4376fb06da62f947c28b18c07b6ad21722 Signed-off-by: Damjan Marion <damarion@cisco.com>
2022-01-09dpdk: port type code cleanupDamjan Marion1-2/+0
Type: improvement Change-Id: I4ead18dee249a27b4dbb8bbf53b6238d91042890 Signed-off-by: Damjan Marion <damarion@cisco.com>
2022-01-07ethernet: new interface registration functionDamjan Marion1-6/+6
Prep for supporting multiple callbacks, optional args, etc. Type: improvement Change-Id: I96244c098712e8213374678623f12527b0e7f387 Signed-off-by: Damjan Marion <damarion@cisco.com>
2022-01-07dpdk: fix rx and tx descriptor configFlorin Coras1-0/+6
Type: fix Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: I48ac0a2c77154b5232a0fe4166518f28d1f1d8ef
2022-01-06dpdk: cleanup MTU handlingDamjan Marion1-98/+7
Type: improvement Change-Id: I4b929693f3671be8ee63a58afcbac75a27d99d57 Signed-off-by: Damjan Marion <damarion@cisco.com>
2022-01-06dpdk: port type from speed_capa bitmap on Cisco VICDamjan Marion1-35/+1
enic driver now properly exposes speed_capa bitmap so this workaround is not needed anymore. Type: refactor Change-Id: Ic754de0b9de32d488405ffcd8d62dd6aa035d2bc Signed-off-by: Damjan Marion <damarion@cisco.com>
2022-01-05dpdk: no need to copy default tx confDamjan Marion1-3/+0
Type: improvement Change-Id: Ifd5201c101da7f4fb63f9b64280a6ec35b2af6a0 Signed-off-by: Damjan Marion <damarion@cisco.com>
2022-01-05interface: refactor interface capabilities codeDamjan Marion1-9/+9
Make it shorter to type, easier to debug, make adding callbacks in future simpler. Type: improvement Change-Id: I6cdd6375e36da23bd452a7c7273ff42789e94433 Signed-off-by: Damjan Marion <damarion@cisco.com>
2022-01-05dpdk: move port config to single structDamjan Marion1-181/+155
Type: refactor Change-Id: I0bce385c7e391fa2b74646d001980610f80f7062 Signed-off-by: Damjan Marion <damarion@cisco.com>
2022-01-05dpdk: remove unused flagDamjan Marion1-6/+0
Type: refactor Change-Id: Iff96a79323d7d428a779e9736e07c1dc9dddb518 Signed-off-by: Damjan Marion <damarion@cisco.com>
2022-01-05dpdk: keep buffer flags per-deviceDamjan Marion1-11/+0
Type: improvement Change-Id: Idb0b079df49c12643c9a93ee0effe011d3489068 Signed-off-by: Damjan Marion <damarion@cisco.com>