Age | Commit message (Collapse) | Author | Files | Lines |
|
Type: fix
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
Change-Id: I215b660a466e0579918e49de543163fd28f95c22
|
|
Type: improvement
Change-Id: I73383eb15186021cd6527d112da8443a0082f129
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: improvement
This patch adds flags to represent the modern NICs capabilities.
Change-Id: I96d38d9ab7eac55974d72795cd100d8337168e1e
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
It is well known that for some NICs, masking
interrupts results in delaying desc writebacks,
which breaks poll mode. This fix introduces an
"int-unmaskable" dpdk device flag to identify such
devices (typically Intel FVL). For such devices,
interrupts are masked by a call to
file_update(...,UNIX_FILE_UPDATE_DELETE) instead
of rte_eth_dev_rx_intr_disable (...)
Change-Id: Ifbc701aebe8572319b7aae19382bd683a47fc3cf
Type: fix
Fixes: 19ff0c3699342b512c03362b3815df684a661f49
Signed-off-by: Mohammed Hawari <mohammed@hawari.fr>
|
|
Change-Id: I6ababc99ecf559327a4370914580c98d32680175
Type: feature
Signed-off-by: Mohammed Hawari <mohammed@hawari.fr>
|
|
Enable DPDK AVX-512 Vector PMDs on Intel Icelake
Type: improvement
Signed-off-by: Ray Kinsella <mdr@ashroe.eu>
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Change-Id: Ie5d5bf54ccaa65c1d053d56a2f2973fe8625193b
|
|
u32[0] is not enough unique for some platforms like azure
where several devices(not only network) can have almost
the same addresses and this can cause collisions.
Change hash to mhash type for vmbus devices with key
of whole 16 bytes of vmbus address.
Type: improvement
Signed-off-by: Vladimir Ratnikov <vratnikov@netgate.com>
Change-Id: Ic6c6a657ae29f45beddd0c69d8e785e702349460
|
|
Type: improvement
Change-Id: I4008cadfd5141f921afbdc09a3ebcd1dcf88eb29
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: fix
When a device is whitelisted with devargs arguments specified, the
string that is generated and added to conf->eal_init_args is not
explicitly terminated with 0. If the formatted string takes up all
of the memory allocated to the vector which stores it and it is
used later as a string in a format() or printf() call, any nonzero
characters stored in memory at the address immediately following the
memory allocated for the vector will be erroneously appended to the
string.
Terminate the string with 0 to ensure that this does not happen.
Change-Id: I20a78d994daad93bf5aecab5c03d705022e882ec
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
now startup.conf supports confuguration for VMBUS
devices as for PCI devices for whitelisting/blacklisting
dpdk { dev fa5a6e7a-cf3a-4b98-9569-addb479b84bc }
with sub-configuration as for PCI devices
dpdk { blacklist fa5a6e7a-cf3a-4b98-9569-addb479b84bc }
where fa5a6e7a-cf3a-4b98-9569-addb479b84bc - example of UUID
struct vlib_vmbus_addr_t changed to union with UUID described
fields
Added device_config_index_by_vmbus_addr
blacklist_by_vmbus_addr
to enumerate available device configs
hash_key is as_u32[0] field(last 4 bytes of UUID)
Lost of precision against full UUID, but 2^32 is enough
to handle all the devices available
Added is_blacklisted check while creating vnet devices in
order to supress creation of dev if it's blacklisted
Type: feature
Signed-off-by: Vladimir Ratnikov <vratnikov@netgate.com>
Change-Id: Id82611e54fed082190e488c7e5fbe14ecbe5b2ab
|
|
Type: refactor
Change-Id: I077110e1a422722e20aa546a6f3224c06ab0cde5
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: refactor
Change-Id: Ie67dc579e88132ddb1ee4a34cb69f96920101772
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: feature
This patch bumps DPDK to 20.11. In addtion a few changes are
made:
- Changed dynamic rx offload flag display.
- Updated deprecating options.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Change-Id: I6e4399d551a7eb8e1a9fc9ef6e39e74266450ad4
|
|
When running with `dpdk { no-hugetlb }` dont try
to allocate hugepages and remove --in-memory as
this seems to be rejected by DPDK
Type: fix
Change-Id: I02c56ade0b4e706b3f76331745e2af64bb62f6e0
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
Currently thread with telemetry is enabled by default, to prevent
to use resources, thread should be off. The thread can be switch on
back using additional option in the dpdk's stanza.
dpdk {
telemetry
}
Type: feature
Change-Id: I1c25e8ee99f31dd01dc372f54e77e81a5bb67126
Signed-off-by: Dmitry Vakrhushev <dmitry@netgate.com>
|
|
If VPP is started in interactive mode, instead of sending logs to syslog
server we print them directly to stderr.
Output is colorized, but that can be turned off with unix { nocolor }
Type: improvement
Change-Id: I9a0f0803e4cba2849a6efa0b6a86b9614ed33ced
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: fix
Fixes: ed04407829728c5d258b6600155edabd5198d971
Signed-off-by: Vladimir Ratnikov <vratnikov@netgate.com>
Change-Id: I5aebcba7b97db758310042fd446328ee8f691641
|
|
Type: fix
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
Change-Id: Ie328834159687cdb4314c37d36697f2fb9081fbd
|
|
This patch adds the RSS steering queues set interface, and it's
implementation in DPDK device:
/* Interface to set rss queues of the interface */
typedef clib_error_t *(vnet_interface_rss_queues_set_t)
(struct vnet_main_t * vnm, struct vnet_hw_interface_t * hi,
clib_bitmap_t *bitmap);
This patch also introduces a command line to set the RSS queues:
set interface rss queues <interface> <list <queue-list>>
To display the rss queues, use "show hardware-interfaces"
Below is the example to configure rss queues for interface Gig0:
vpp# set interface rss queues Gig0 list 0,2,4-7
vpp# show hardware-interfaces brief
Name Idx Link Hardware
VirtualFunctionEthernet18/1/0 1 down VirtualFunctionEthernet18/1/0
Link speed: unknown
RSS queues: 0 2 4 5 6 7
local0 0 down local0
Link speed: unknown
vpp#
Users can also configure the rss queues on a dpdk interface in
startup.conf:
dpdk {
dev 0000:18:01.0 {
rss-queues 0,2,5-7
}
}
Type: feature
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
Change-Id: I1835595a1c54016a84eabee9fd62ce137935385d
|
|
When we have both format blacklisted devices like:
blacklist 1234:5678
blacklist 1234:56:78.0
unformat with fmt=%x:%x matches for both strings
and the rest 78.0 substring is kept in input
and it can't be parsed for init args
This patch checks first if device format matches PCI address and
just then if it matches Vendor and Product
Type: fix
Change-Id: If111762c0e0a424b052e4f6dc0f67731bf89dc2a
Signed-off-by: Vladimir Ratnikov <vratnikov@netgate.com>
|
|
This introduces a txq structure mirroring the rxq structure.
This fixes the case when #txq > #rxq, because lock must be per txq.
Type: fix
Fixes: dfb19cabe20ccf1cbd1aa714f493ccd322839b91
Change-Id: Ic1bce64d2b08b9a98c8242a1ba1bfcdbda322bec
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: improvement
Change-Id: I3defde103ab245404de42d2be7abcb2c43d49a60
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Fix and optimize DMAC check in ethernet-input node to utilize NIC or
driver which support L3 DMAC-filtering mode so that DMAC check can be
bypassed safely for interfaces/sub-interfaces in L3 mode.
Checking of interface in L3-DMAC-filtering state to avoid DMAC check
require the following:
a) Fix interface driver init sequence for devices which supports L3
DMAC-filtering to indicate its capability and initialize interface
to L3 DMAC-filtering state.
b) Fix ethernet_set_flags() function and its associated callback
flags_change() functions registered by various drivers in interface
infra to provide proper L3 DMAC filtering status.
Maintain interface/sub-interface L3 config count so DMAC checks can be
bypassed if L3 forwarding is not setup on any main/sub-interfaces.
Type: fix
Ticket: VPP-1868
Signed-off-by: John Lo <loj@cisco.com>
Change-Id: I204d90459c13e9e486cfcba4e64e3d479bc9f2ae
|
|
Netvsc devices have the port type determined from their link speed.
The link speed between reboots of an Azure VM does not always end
up at the same value, so an interface that was FortyGigabitEthernet0
earlier may be FiftyGigabitEthernet0 now. That makes it difficult
to maintain a persistent store of configurations and apply those at
startup.
Change the port type to be VF so the name will always be generated
as VirtualFunctionEthernetX.
Type: improvement
Change-Id: I58cab852b87c0bcd9f73afe239803f38dab5c159
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
cxgbe PMD initializes its control channel as part of dev_configure(),
and trying to get link status prior to it will lead to a crash.
DPDK documentation loosely hints that we should not call any device
function before dev_start(), call link_state() only for the relevant
PMDs.
From DPDK API documentation:
The functions exported by the application Ethernet API to setup a device
designated by its port identifier must be invoked in the following
order:
rte_eth_dev_configure()
rte_eth_tx_queue_setup()
rte_eth_rx_queue_setup()
rte_eth_dev_start()
Then, the network application can invoke, in any order, the functions
exported by the Ethernet API to get the MAC address of a given device,
to get the speed and the status of a device physical link, to
receive/transmit [burst of] packets, and so on.
Type: fix
Change-Id: I12d2ab4d84e6bd72a9f695447e86f3222929c804
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: feature
Signed-off-by: Damjan Marion <damarion@cisco.com>
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Signed-off-by: Piotr Bronowski <piotrx.bronowski@intel.com>
Signed-off-by: Dariusz Kazimierski <dariuszx.kazimierski@intel.com>
Signed-off-by: Piotr Kleski <piotrx.kleski@intel.com>
Change-Id: I4c3fcccf55c36842b7b48aed260fef2802b5c54b
|
|
This patch enables the RSS configuration through vnet/flow interface
With this RSS feature, users can config the RSS functions for specific flows
Currently, it supports:
default, toeplitz and symmetric_toeplitz rss function, and
ipv4-tcp/ipv4-udp/ipv6-tcp/ipv6-ucp flow types
Users can use the following options to combine with above flow
types for more specific hash input set selection:
l3-src-only, l3-dst-only, l4-src-only, l4-dst-only
Command line:
test flow add dst-ip any proto udp rss function default rss types ipv4-tcp use l3-dst-only
test flow add dst-ip any proto udp rss function toeplitz rss types ipv4-udp use l4-src-only
test flow add dst-ip any proto udp rss function symmetric_toeplitz rss types ipv6-udp use l3-src-only and l3-dst-only
Type: feature
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
Change-Id: I213efc76dc8af37f2f63605884f353e05b0f5d2a
|
|
Type: fix
Ticket: VPP-1837
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I9ec87d2293d8f92c3e488a0f61083cf815ac496c
|
|
Type: fix
Change-Id: I3c7ebbe91e7dffe9fd6851e5334fe920f2187cf0
Signed-off-by: Amir Zeidner <amirzei@mellanox.com>
|
|
DPDK recently added a check in the virtio driver to make sure that
rxmode->mq_mode == ETH_MQ_RX_NONE. We were passing ETH_MQ_RX_RSS
and the device initialization was not accepted.
The reason for the change in DPDK was that there is no controls
(algorithm, redirection table, hash function). So they thought ETH_MQ_RX_NONE
was the best choice for the value of mq_mode.
Type: fix
Ticket: VPP-1853
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: Ifa0fc4206cedc56a851f94f6434a2a7500bbd419
|
|
This patch adds support for the DPDK iAVF PMD
Type: feature
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
Change-Id: I7bb0f621774e4c55b9b7309462e6591ce1b88fb6
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I5a3e3a41dcc60c0d9b291e51bb112e7701f73050
|
|
While TSO is supported for Intel NIC, Cisco VIC does not work.
The problem is due to txmode offloads is not properly set for
the Cisco VIC when enable-tcp-udp-checksum is configured.
Type: fix
Ticket: VPP-1838
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: I72c41db9b327ed8d08ef70d74e8cc6206d4a102f
|
|
Type: feature
Representor devices include a port ID as part of their switch_info struct, and
it is helpful to use that in the interface name.
Signed-off-by: Haggai Eran <haggai.eran@gmail.com>
Change-Id: Id24627e7daf857f8b0e8ace2f592c098678081c7
|
|
Not in functional state for a long time ...
Type: refactor
Change-Id: I2cc1525a6d49518cbc94faf6afbf0d2d0d515f56
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: feature
This patch adds the devargs support for dpdk device
The devargs are used as hardware-specific init args for dpdk devices
please refer to the nic guides under
$(DPDK_DIR)/doc/guides/nics/$(NIC_DRIVER).rst
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
Change-Id: Id380d04720090bb66afe5ce09d664e5e248b8eb9
|
|
Type: refactor
Change-Id: I51405b9d09fb6fb03d08569369fdd4e11c647908
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: fix
Change-Id: Ic221cd4fcad89aece71239ed96152bf0311f3286
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
This adds support to compile the bnxt PMD that supports Broadcom's
10/25/40/50/100/200 Gbps NICs. Tested with modified DPDK driver on
x86_64 and aarch64 targets that is pending upstream acceptance, but
should compile just fine today.
Type: feature
Signed-off-by: Andy Gospodarek <gospo@broadcom.com>
Change-Id: I735a991c4cae4fa77e5605094facea54b781a1db
|
|
Type: fix
Fix tso did not properly check the 'enable-tcp-udp-checksum' option issue
Add description of 'tso' and 'enable-tcp-udp-checksum' in startup.conf
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
Change-Id: Id659067a9fa9e1db6c3f8dc533a2e90351b86831
|
|
Type: fix
Change-Id: I44922f70aef6a3c53f0f56c6d0656502c8fd69b2
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Fix problem with some strings not being null-terminated,
by using the vec_terminate_c_string macro in two places.
The problem was found using AddressSanitizer.
(Also make sure indentation is OK for those changes.)
Ticket: VPP-1772
Type: fix
Signed-off-by: Elias Rudberg <elias.rudberg@bahnhof.net>
Change-Id: Ib7826e3c322e58b649e2d7f6053786da618a5e9e
|
|
Type: fix
Signed-off-by: John Lo <loj@cisco.com>
Change-Id: I3ee59106ba45164a4ee3788bf4dcf5bf4c2dc1c2
|
|
Type: feature
Change-Id: I16b8cdf0b6af6715a5f01ad84365a8c8a1b76237
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: feature
You can enable tso in starup.conf like this:
dev 0000:86:00.0{
tso on
}
TSO is disabled by default.
Change-Id: Ifdbaf5322f768c384aa54e532d7bf45e810ca01c
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
|
|
Type: feature
Change-Id: I21f8f4563f5545a684b2666f7410847e0f7bc403
Signed-off-by: Jim Thompson <jim@netgate.com>
|
|
Type: fix
Fixes: ce3e971
Change-Id: I30bbeced2f5ae7613e65546f2b9b41e2fb514208
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Explains a variety of hard-to-diagnose problems with certain Atom and
Denverton NIC types.
I finally tripped over a highly-repeatable failure: home gateway
use-case bitten by refusal to negotiate a DHCP lease for the trunk
port.
The dhcp client won't send pkts unless VNET_HW_INTERFACE_FLAG_LINK_UP
is set on the tx hw interface:
/* Interface(s) down? */
if ((hw->flags & VNET_HW_INTERFACE_FLAG_LINK_UP) == 0)
return;
Change-Id: I17ef2ba7b39078555fa27d2d874a60c67e1530ee
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
This patch enables bonding numa awareness on multi-socket
server working in active-backeup mode.
The VPP adds capability for automatically preferring slave
with local numa node in order to reduces the load on the
QPI-bus and improve system overall performance in multi-socket
use cases. Users doesn't need to add any extra operation as
usual.
Change-Id: Iec267375fc399a9a0c0a7dca649fadb994d36671
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
|
|
We have native implementation and we should not maintain both....
Change-Id: Ic09ebffda52cdc733b3cfeff06690e0d3cc08084
Signed-off-by: Damjan Marion <damarion@cisco.com>
|