summaryrefslogtreecommitdiffstats
path: root/src/plugins/dpdk/device/node.c
AgeCommit message (Collapse)AuthorFilesLines
2018-06-21configurable per-dispatch-cycle sleepDave Barach1-21/+0
Workaround for lack of driver interrupt support. Also quite handy for home gateway, laptop/vagrant, other use-cases not requiring maximum vectors/second for proper operation. Change-Id: Ifc4b98112450664beef67b89ab8a6940a3bf24b5 Signed-off-by: Dave Barach <dave@barachs.net>
2018-06-19flow:free lookup entries after packets are handledeyal bari1-2/+2
Change-Id: I737dad64bf6dd0743d36500d5cfa1cb1a6594b98 Signed-off-by: Eyal Bari <ebari@cisco.com>
2018-06-13vxlan:offload RX floweyal bari1-1/+1
ip4 vxlan cli/api (using flow infra) to create flows and enable them on different hardware (currently tested with i40e) to offload a vxlan tunnel onto hw: set flow-offload vxlan hw TwentyFiveGigabitEthernet3/0/0 rx vxlan_tunnel1 to remove offload: set flow-offload vxlan hw TwentyFiveGigabitEthernet3/0/0 rx vxlan_tunnel1 del TODO:ipv6 handling Change-Id: I70e61f792ef8e3f007d03d7df70e97ea4725b101 Signed-off-by: Eyal Bari <ebari@cisco.com>
2018-05-31dpdk: Decoupling the meaning of xd->device_index in dpdk_pluginRui Cai1-1/+1
Prior to the change, dpdk plugin assumes xd->device_index is used both as index for internal dpdk_main->devices array and DPDK port index to call into DPDK APIs. However, when running on top of Failsafe PMDs, DPDK port index range may no longer be contiguous (as noted: http://dpdk.org/ml/archives/dev/2018-March/092375.html for related changes in DPDK). Because this, dpdk plugin can no longer iterate through all available DPDK ports with a for 0->rte_eth_dev_count() loop and the assumption of device_index no longer holds. This is part of initial effort to enable vpp running over dpdk on failsafe PMD in Microsoft Azure(3/4). Change-Id: I416fd80f2d40e12e139f8f3492814da98343eae7 Signed-off-by: Rui Cai <rucai@microsoft.com>
2018-05-29Add VLIB_NODE_FN() macro to simplify multiversioning of node functionsDamjan Marion1-19/+3
Change-Id: Ibab5e27277f618ceb2d543b9d6a1a5f191e7d1db Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-05-25Add interface rx pcap tracingDave Barach1-1/+43
Should cost at most 1 clock per frame when not enabled. Add "pcap rx trace..." debug CLI, refactored "pcap tx trace" debug CLI to avoid duplicating code. Change-Id: I19ac75d1cf94a6a24c98facbf0753381d37963ea Signed-off-by: Dave Barach <dbarach@cisco.com>
2018-05-18Add vlib_buffer_enqueue_to_next inline functionDamjan Marion1-75/+3
Change-Id: I1042c0fe179b57a00ce99c8d62cb1bdbe24d9184 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-05-17Add buffer pointer-to-index and index-to-pointer array functionsDamjan Marion1-60/+3
Change-Id: Ib3fcc3ceb7f315389bcdecbb7d9632540a5dd6ba Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-05-10vnet: device flow offload infraDamjan Marion1-0/+40
Change-Id: Ibea4a96bdec5e368301a03d8b11a0712fa0265e0 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-05-09dpdk:fix mbuf index typo'sEyal Bari1-4/+4
Change-Id: I387b22427b3f322969bcf32fcfc189123c8ed6ae Signed-off-by: Eyal Bari <ebari@cisco.com>
2018-05-07dpdk: improve perf of buffer indices calc in the input nodeDamjan Marion1-34/+53
Change-Id: I16557189aa4a763ec496cb4a45f6e12f2d46971f Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-04-27A bit of buffer metadata reshuffling to accommodate flow_idDamjan Marion1-1/+1
Change-Id: I2794384557c6272fe217269b14a9db09eda19220 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-04-25dpdk: complete rework of the dpdk-input nodeDamjan Marion1-424/+515
Change-Id: If174d189de40e6f9ffae99997bba93a2519d9fda Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-04-04dpdk:fix checksum handling of l2 interfacesEyal Bari1-17/+19
dpdk-input was dropping packets with bad ip-checksum on l2 interfaces Change-Id: Ife5b52766bb71e878b1da6e94ae7b8a1e59fc478 Signed-off-by: Eyal Bari <ebari@cisco.com>
2018-03-11dpdk-input node packet trace intermittent on IP forwading pathJohn Lo1-36/+37
Packet trace initiated by dpdk-input node would occasionally not fully function if next node is ip4-input. Change packet trace saving order in the quad-loop so "sho trace" will display trace in packet receive order. Fold calling of vlib_trace_buffer() into dpdk_add_trace(). Change-Id: I9d7a9bf3b9391f95590e66150b26b0b15912d803 Signed-off-by: John Lo <loj@cisco.com>
2018-02-12dpdk:fix trace to follow feature arcEyal Bari1-80/+66
Change-Id: Icd2184dec16d30cdcc689ca37c834b5df2f0a1a3 Signed-off-by: Eyal Bari <ebari@cisco.com>
2018-02-01dpdk:fix typo in prefetch sequenceEyal Bari1-2/+2
Change-Id: I7110436626352d45ffe0ca71fb88dea2c77ab639 Signed-off-by: Eyal Bari <ebari@cisco.com>
2017-12-04dpdk: remove duplicate functionEyal Bari1-32/+1
dpdk_rx_next_from_packet_start is equivalent to dpdk_rx_next_from_etype and seems to have no side effects Change-Id: I629dadfbfb35ad1f5c7198e7824883ae4bd6abaa Signed-off-by: Eyal Bari <ebari@cisco.com>
2017-11-21dpdk: add l2_hdr_offset and l3_hdr_offset in vlib_buffer_tDamjan Marion1-56/+57
Change-Id: I0a6d1257e391c3b6f7da6498bd5f7d4c545d17e9 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-11-13dpdk: introduce AVX512 variants of node functionsDamjan Marion1-42/+22
Change-Id: If581feca0d51d0420c971801aecdf9250c671b36 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-10-25vlib: add support for multiple buffer poolsDamjan Marion1-0/+3
Change-Id: Icaf7d7ad47284aea7a56e8006b69f45874d64202 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-09-25Fix sending GARP/NA on Bonded Interface Active/Backup Link Up/DownJohn Lo1-0/+2
For bonded interface in Active/Backup mode (mode 1), we need to send a GARP/NA packet, if IP address is present, on slave link state change to up or down to help with route convergence. The callback from DPDK happens in a separate thread so we need to make sure RPC call is used to signal the send_garp_na process in the main thread. Also need to fix DPDK polling so the slave links are not polled. Change-Id: If5fd8ea2d28c54dd28726ac403ad366386ce9651 Signed-off-by: John Lo <loj@cisco.com>
2017-07-14Introduce l{2,3,4}_hdr_offset fields in the buffer metadataDamjan Marion1-1/+7
To save space in the first cacheline following is changed: - total_length_not_including_first_buffer moved to the 2nd cacheline. This field is used only when VLIB_BUFFER_TOTAL_LENGTH_VALID and VLIB_BUFFER_NEXT_PRESENT are both set. - free_list_index is now stored in 4bits inside flags, which allows up to 16 free lists. In case we need more we can store index in the 2nd cachelin Change-Id: Ic8521350819391af470d31d3fa1013e67ecb7681 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-05-15[plugins/dpdk] Support for CLIB_HAVE_64 (aarch64)Christophe Fontaine1-0/+13
For platforms which do not support u8x32, such as aarch64, add an alternative implementation of 'dpdk_buffer_init_from_template'. Change-Id: Ia7e8d0a5985fa5925e063ed6e890208c73e39933 Signed-off-by: Christophe Fontaine <christophe.fontaine@enea.com>
2017-04-27dpdk: cleanup, move APIs to separate .c fileDamjan Marion1-1/+1
Change-Id: Id632ff1b30be808d9f270e2f77260391569fbda2 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-04-11dpdk: use common interface placement infraDamjan Marion1-4/+5
This pathch deprecates "show dpdk placement" and "set dpdk placement" CLI commands. Change-Id: I4e052ec3e8b8e6c54b4816e1e689e5b7a24892db Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-04-07MPLS McastNeale Ranns1-1/+1
1 - interface-DPO Used in the Data-plane to change a packet's input interface 2 - MPLS multicast FIB entry Same as a unicast entry but it links to a replicate not a load-balance DPO 3 - Multicast MPLS tunnel Update MPLS tunnels to use a FIB path-list to describe the endpoint[s]. Use the path-list to generate the forwarding chain (DPOs) to link to . 4 - Resolve a path via a local label (of an mLDP LSP) For IP multicast entries to use an LSP in the replication list, we need to decribe the 'resolve-via-label' where the label is that of a multicast LSP. 5 - MPLS disposition path sets RPF-ID For a interface-less LSP (i.e. mLDP not RSVP-TE) at the tail of the LSP we still need to perform an RPF check. An MPLS disposition DPO performs the MPLS pop validation checks and sets the RPF-ID in the packet. 6 - RPF check with per-entry RPF-ID An RPF-ID is used instead of a real interface SW if index in the case the IP traffic arrives from an LSP that does not have an associated interface. Change-Id: Ib92e177be919147bafeb599729abf3d1abc2f4b3 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-04-06Use thread local storage for thread indexDamjan Marion1-15/+17
This patch deprecates stack-based thread identification, Also removes requirement that thread stacks are adjacent. Finally, possibly annoying for some folks, it renames all occurences of cpu_index and cpu_number with thread index. Using word "cpu" is misleading here as thread can be migrated ti different CPU, and also it is not related to linux cpu index. Change-Id: I68cdaf661e701d2336fc953dcb9978d10a70f7c1 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-03-14Fix packet trace output: dpdk_rx_trace must decode the actual ethertypeDave Barach1-1/+31
As opposed to rubbish (typically) 14 octets past the ethertype. Also fix buffer error code setup in dpdk-input node single loop. Change-Id: Ide7c4097d3bb91e62749ed4e1d69a7b4b90225de Signed-off-by: Dave Barach <dbarach@cisco.com> Signed-off-by: John Lo <loj@cisco.com>
2017-03-08dpdk: dpdk-input optimizations and fixesDamjan Marion1-96/+104
- fix issue caused by assumption that ethertype starts at 0 - intoduce buffer templates to speed-up vlib_buffer_t metadata initialization - avoid check for multiseg buffers inside loop if multiseg is disabled - interleave prefetches to reduce load on L1 cache Change-Id: I3b76e6d3e1e15ed28f01625edb7fbe9f38112e03 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-03-08Change dpdk input node fixed-sleep units to usecDave Barach1-2/+2
Change-Id: I94e8737cad9222d24602db4ad03bf43c12c62b79 Signed-off-by: Dave Barach <dave@barachs.net>
2017-03-06features: take device-input buffer advance value directlyDamjan Marion1-4/+2
Change-Id: Ifac7d9134d03d79164ce6f06ae9413279bbaadb3 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-03-02Determine pkt type in dpdk-input node using ethertype only (VPP-647)John Lo1-52/+22
Remove reliance on DPDK driver provided mbuf packet type in dpdk-input node as some NIC driver provide misleading information. Now using ethertype from the packet itself to determine packet type for next node. Change-Id: Ie7b514a984f9382c29f1a1e3eb423d68f817c064 Signed-off-by: John Lo <loj@cisco.com>
2017-03-01dpdk: be a pluginDamjan Marion1-0/+674
Change-Id: I238258cdeb77035adc5e88903d824593d0a1da90 Signed-off-by: Damjan Marion <damarion@cisco.com>