Age | Commit message (Collapse) | Author | Files | Lines |
|
The function dpdk_ol_flags_extract should return u16
instead of u8.
Change-Id: Id0b08b04c93598818f9a2eee5a88733900320dfa
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
|
|
Change-Id: Idc3763c38f5aa638d4f290f4d4730577601d78b8
Signed-off-by: Simon Zhang <yuwei1.zhang@intel.com>
|
|
Change-Id: Ia092a93a7ac0cbf9338f9d4a5db8b94b23549a13
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I65e7188c6893acca67455ff37f2dfbd0bedd5c09
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I65b1af5fa0cec4f9789f91f720d1396d06fa0206
Signed-off-by: Simon Zhang <yuwei1.zhang@intel.com>
|
|
As DVN has fewer DTLB entries supported for 2M page, default numbers of
RX/TX descriptors are changed to 512 if nums of RX/TX descriptors are not
specified by VPP users.
Change-Id: I076493b802b15d12750a5b49d1554da4d19ad460
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
|
|
Change-Id: I48cd8052f9509efdf13f64ab279edb66a2d4a0a9
Signed-off-by: Simon Zhang <yuwei1.zhang@intel.com>
|
|
Change-Id: Idfcf1644952d647c6e1b61216d9b365d58b77814
Signed-off-by: Simon Zhang <yuwei1.zhang@intel.com>
|
|
With the following local patch, VIC adapters remove default vlan tags
from ingress packets. So, it is no longer necessary to enable VLAN
stripping by default. This change also allows VLAN sub interfaces to
work with VIC adapters.
patches/dpdk_19.02/0001-net-enic-untag-default-vlan-by-default.patch
Change-Id: I2e7d62c62120c351c27d827d90de4a8335efa044
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
|
|
Change-Id: Id5b30d7a394551844a79b3d222d2d26194d033df
Signed-off-by: ChenminSun <chenmin.sun@intel.com>
|
|
Change-Id: I572cbba817275d85c200a4b09a63f4650075f638
Signed-off-by: Jay Lubomirski <jlubomir@cisco.com>
|
|
The log-level dpdk config value should be transparently
forwarded to DPDK via EAL argument. Since DPDK now supports
naming log-levels, VPP no longer needs to parse and call
rte_set_loglevel().
This was the other part of the DPDK log-level change.
It must have got missed during my initial checkin.
Without it passing dynamic log-level values like are silently
ignored.
Fixes: 6ca6ac6c887e ("dpdk: support passing log-level")
Change-Id: I732cec5f638c9924e3ffb04c4753f957e3633d64
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
|
|
Moved code to the ethernet input node, and the interface output
path(s). Since we no longer skip ethernet-input, there's no reason
for device drivers to know anything about pcap rx tracing, etc.
Change-Id: I08d32fb1b90cbee1bd4f609837d533e047b36fa4
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: I01c4f5755d579282773ac227b0bc24f8ddbb2bd1
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Recent VIC models can support 25, 50, and 100Gbps links. Use the
helper (port_type_from_link_speed) to set the port type as it supports
all possible link speeds.
Change-Id: I748d8ac716a6393d116a9db8a599151c70a9000a
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
|
|
PKT_RX_FDIR is a bit flag, not a bit position.
Change-Id: Ib31ec9257e906b045522fa7c2b515b7b0c13bb32
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
|
|
Change-Id: I9a2e8ea2bf334dd8dabf3d25abbcc91087a43882
Signed-off-by: Dave Barach <dbarach@cisco.com>
|
|
Change-Id: Ieab56e0a20696b8cc97f783f08f10a94a83644eb
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
HQoS requires fixes to work with dpdk 19.02 so code is disabled and
pending deprecation unless active maintainer is found.
Change-Id: I3569c4287b6dfdd2c29e02375eb53bf01fa6ae84
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I6aa030429c1740f7376e95daf82fce49efa6716b
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
This patch introduces following changes:
- deprecated free lists which are not used and not compatible
with external buffer managers (i.e. DPDK)
- introduces native support for per-numa buffer pools
- significantly improves performance of buffer alloc and free
Change-Id: I4a8e723ae47056717afd6cac0efe87cb731b5be7
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I998658ad7860b23425444e218ce2e1ec655b885a
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: Ia083050389853c25b069f0f8286d50d3f4aef527
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Storing buffer in local template seems to be better option....
Change-Id: I1a2fdd68cb956f99a5b36d2cd810fc623e089bcf
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Some dpdk driver does not support rte_eth_dev_rss_hash_conf_get. When that
happens, we display whatever that was in the stack variable for rss_hf which
is confusing.
The fix is to clear rss_hf prior to the call.
Before the fix
--------------
DBGvpp# sh hard
Name Idx Link Hardware
format_dpdk_device:599: rte_eth_dev_rss_hash_conf_get returned -95
GigabitEthernet13/0/0 2 up GigabitEthernet13/0/0
Link speed: 10 Gbps
Ethernet address 00:0c:29:c4:8c:eb
VMware VMXNET3
...
rss avail: ipv4 ipv4-tcp ipv6 ipv6-tcp
rss active: ipv4 ipv4-frag ipv4-tcp ipv4-udp ipv4-other
After the fix
-------------
DBGvpp# sh hard
Name Idx Link Hardware
format_dpdk_device:600: rte_eth_dev_rss_hash_conf_get returned -95
GigabitEthernet13/0/0 2 up GigabitEthernet13/0/0
Link speed: 10 Gbps
Ethernet address 00:0c:29:c4:8c:eb
VMware VMXNET3
..
rss avail: ipv4 ipv4-tcp ipv6 ipv6-tcp
rss active: none
Change-Id: If8f8327f0012eecc8d23cd7f3f9cc581ca025654
Signed-off-by: Steven <sluong@cisco.com>
|
|
Change-Id: I3896bf9d71dc300520c53dbe3c2fd8fcd1470881
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
This patch adds support for VMBus to the VPP infrastructure.
Since the only device that matters is the netvsc Poll Mode Driver
in DPDK, the infrastructure is much simpler than PCI.
Change-Id: Ie96c897ad9c426716c2398e4528688ce2217419b
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
|
|
Change-Id: I89695c1ad47131ed830f35c677937ce12025a40d
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: Ib6458e56f546bb5b11c23aa5e1afe0f4b5011c08
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Example:
dpdk {
dev 0000:01:00.0 { name eth0 }
dev 0000:02:00.0 { name eth1 }
}
Change-Id: I11e60e969a7e3548c99ac0c0c3531767819cb157
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I3555230ef7b7677d6187282fb0c0f02af216e0a0
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I4ec7750ef58363bd8966a16a2baeec6db18b7e9e
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I6a6ab6d8d9aeca9df3ba8a3ac519be25aaa796e8
Signed-off-by: Federico Claramonte <fede.claramonte@caviumnetworks.com>
|
|
To facilitate dispatch trajectory tracing, vlib_buffer_t decoding, etc.
through Wireshark
Change-Id: I31356b9fa1f40cba8830aaf10a86a9fbb7546438
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: Id4f37f5d4a03160572954a416efa1ef9b3d79ad1
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: I3daf8d473aa37b4597d130d19913b782cf7b8511
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: Idd4471a3adf7023e48e85717f00c786b1dde0cca
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
If no PCI address is specified in dpdk config, the default to automatically
put all PCIs in the whitelist.
For vmxnet3 PCIs, we want to change its default to exclude the vmxnet3 PCIs.
That is to put them in the blacklist instead of whitelist.
Change-Id: I2b7061d6437910eb0e1b16df19a770cab968c602
Signed-off-by: Steven <sluong@cisco.com>
|
|
Change-Id: I49a5029d256df8f749ee30d19ff7473147b6516f
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
When netvsc or failsafe DPDK device is used, the DPDK port id does not
match the VPP device instance id. The code that formats the device
name was incorrectly calling DPDK device info using the VPP device
instance id. This causes the VPP interface to be named
"FortyGigabit0/2/0" based on mistakenly finding the PCI device
information of the hidden DPDK port id for the VF device.
Change-Id: I9366232f4b2087076bdcc1a58bf228007c24c084
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
|
|
The pmd device type show with 'show hardware' is wrong if using failsafe
(or netvsc pmd) because the pmd device type should be based of the VPP device
instance, not the DPDK port id.
Fixes: a059a000f81a ("dpdk: Decoupling the meaning of xd->device_index in dpdk_plugin")
Change-Id: I3880fe674731880c5706a21d8ef3ccf8d569d46d
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
|
|
The failsafe driver is unique because it shares device with underlying
pci device. This confuses name generation. Without this fix, the name
is wrong and multiple devices get created with same name.
Fixes: 3901a038edf4 ("dpdk: only look at PCI information on PCI devices")
Change-Id: I13796d03baf6c76dafe3667c83bea4a1ae30c48f
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
|
|
Change-Id: I88577615bfd3cddca834a7b881979ab32bfd5574
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I5ff713ad0b254c74c5622e3b9425cca365b5ee97
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: Ic4c46bc733afae8bf0d8146623ed15633928de30
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
In DPDK 18.11 the device flags for keeping/stripping CRC flags has
changed. The old strip flag is gone, and replaced by a CRC keep
flag.
Change-Id: Iaa162854862a2a0855b418ee8029383fc116d3a2
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
|
|
Change-Id: Ied34720ca5a6e6e717eea4e86003e854031b6eab
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
- logging
- pass vlib_main_t to all APIs
- open vfio container only when needed
Change-Id: I897e53e0af3f91c3a99f0c827401d1c0ec2e478a
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: Ibec32c6df32f4cd9889d378e244f170c93ad295b
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Teach DPDK plugin about the netvsc Poll Mode Driver.
The speed of the Netvsc device matches the speed of the external
port on the underlying vswitch. Therefore 1G, 10G, 25G, 56G and
even 100G are possible.
Change-Id: I14ab6907b7d8d350b63a083409d45fb9c348a364
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
|