Age | Commit message (Collapse) | Author | Files | Lines |
|
Type: fix
Signed-off-by: jiangxiaoming <jiangxiaoming@outlook.com>
Change-Id: I87c6f423ea8fdd9fb764693055eb1509f994d6f1
|
|
This is the code refactor for vnet/flow infra and the dpdk_plugin flow
implementation. The main works of the refactor are:
1. Added two base flow type: VNET_FLOW_TYPE_IP4 and VNET_FLOW_TYPE_IP6
as the base the flow type
2. All the other flows are derived from the base flow types
3. Removed some flow types that are not currently supported by
the hardware, and VPP won't leverage them either:
IP4_GTPU_IP4, IP4_GTPU_IP6, IP6_GTPC, IP6_GTPU,
IP6_GTPU_IP4, IP6_GTPU_IP6
4. Re-implemented the vnet/flow cli as well as the dpdk_plugin
implementation
5. refine cli prompt
6. refine display info in command "show flow entry"
Type: refactor
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
Change-Id: Ica5e61c5881adc73b28335fd83e36ec1cb420c96
|
|
When we have both format blacklisted devices like:
blacklist 1234:5678
blacklist 1234:56:78.0
unformat with fmt=%x:%x matches for both strings
and the rest 78.0 substring is kept in input
and it can't be parsed for init args
This patch checks first if device format matches PCI address and
just then if it matches Vendor and Product
Type: fix
Change-Id: If111762c0e0a424b052e4f6dc0f67731bf89dc2a
Signed-off-by: Vladimir Ratnikov <vratnikov@netgate.com>
|
|
CID 211153
Type: fix
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
Change-Id: Ic4d518d047c3ff36d9a7b72477c3efcb554d05bb
|
|
In case of vector, we must check length before trying to access element.
Also fix wrong DPDK plugin workaround.
Type: fix
Change-Id: I2ecef1c88ebef2362f48cab0d462699aa43cd4b9
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
This introduces a txq structure mirroring the rxq structure.
This fixes the case when #txq > #rxq, because lock must be per txq.
Type: fix
Fixes: dfb19cabe20ccf1cbd1aa714f493ccd322839b91
Change-Id: Ic1bce64d2b08b9a98c8242a1ba1bfcdbda322bec
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
This patch adds the IPSec ESP/AH type flow support
Have tested on E810 with Intel iAVF driver
Type: feature
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
Change-Id: I6ab8e69f67c423cc4e33f3c363881a97cdb98c30
|
|
Type: improvement
Change-Id: I3defde103ab245404de42d2be7abcb2c43d49a60
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Fix and optimize DMAC check in ethernet-input node to utilize NIC or
driver which support L3 DMAC-filtering mode so that DMAC check can be
bypassed safely for interfaces/sub-interfaces in L3 mode.
Checking of interface in L3-DMAC-filtering state to avoid DMAC check
require the following:
a) Fix interface driver init sequence for devices which supports L3
DMAC-filtering to indicate its capability and initialize interface
to L3 DMAC-filtering state.
b) Fix ethernet_set_flags() function and its associated callback
flags_change() functions registered by various drivers in interface
infra to provide proper L3 DMAC filtering status.
Maintain interface/sub-interface L3 config count so DMAC checks can be
bypassed if L3 forwarding is not setup on any main/sub-interfaces.
Type: fix
Ticket: VPP-1868
Signed-off-by: John Lo <loj@cisco.com>
Change-Id: I204d90459c13e9e486cfcba4e64e3d479bc9f2ae
|
|
Netvsc devices have the port type determined from their link speed.
The link speed between reboots of an Azure VM does not always end
up at the same value, so an interface that was FortyGigabitEthernet0
earlier may be FiftyGigabitEthernet0 now. That makes it difficult
to maintain a persistent store of configurations and apply those at
startup.
Change the port type to be VF so the name will always be generated
as VirtualFunctionEthernetX.
Type: improvement
Change-Id: I58cab852b87c0bcd9f73afe239803f38dab5c159
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
cxgbe PMD initializes its control channel as part of dev_configure(),
and trying to get link status prior to it will lead to a crash.
DPDK documentation loosely hints that we should not call any device
function before dev_start(), call link_state() only for the relevant
PMDs.
From DPDK API documentation:
The functions exported by the application Ethernet API to setup a device
designated by its port identifier must be invoked in the following
order:
rte_eth_dev_configure()
rte_eth_tx_queue_setup()
rte_eth_rx_queue_setup()
rte_eth_dev_start()
Then, the network application can invoke, in any order, the functions
exported by the Ethernet API to get the MAC address of a given device,
to get the speed and the status of a device physical link, to
receive/transmit [burst of] packets, and so on.
Type: fix
Change-Id: I12d2ab4d84e6bd72a9f695447e86f3222929c804
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
explicitly convert RSS function types from vnet_rss_function_t to
rte_eth_hash_function to avoid these two types go out of sync in the future...
Type: fix
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
Change-Id: Ic09f6bb7f2cfbcf7cc4d380e51554b7f2b7a3b90
|
|
This patch adds the l2tpv3oip type flow support
Have tested on E810 with Intel iAVF driver
Type: feature
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
Change-Id: Icb5114b5f70dd7a63f681e7c6ac802fade8b8cf1
|
|
Type: feature
Signed-off-by: Damjan Marion <damarion@cisco.com>
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Signed-off-by: Piotr Bronowski <piotrx.bronowski@intel.com>
Signed-off-by: Dariusz Kazimierski <dariuszx.kazimierski@intel.com>
Signed-off-by: Piotr Kleski <piotrx.kleski@intel.com>
Change-Id: I4c3fcccf55c36842b7b48aed260fef2802b5c54b
|
|
Type: improvement
Change-Id: Iebf77a63c0c19b130a3fbd26b5293304a9fed4c1
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I8c0eb5b5b12ffac1ff5dc89cab10bdb8e4be4322
|
|
This patch enables the RSS configuration through vnet/flow interface
With this RSS feature, users can config the RSS functions for specific flows
Currently, it supports:
default, toeplitz and symmetric_toeplitz rss function, and
ipv4-tcp/ipv4-udp/ipv6-tcp/ipv6-ucp flow types
Users can use the following options to combine with above flow
types for more specific hash input set selection:
l3-src-only, l3-dst-only, l4-src-only, l4-dst-only
Command line:
test flow add dst-ip any proto udp rss function default rss types ipv4-tcp use l3-dst-only
test flow add dst-ip any proto udp rss function toeplitz rss types ipv4-udp use l4-src-only
test flow add dst-ip any proto udp rss function symmetric_toeplitz rss types ipv6-udp use l3-src-only and l3-dst-only
Type: feature
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
Change-Id: I213efc76dc8af37f2f63605884f353e05b0f5d2a
|
|
i2c follows its only use case - the original 82599 driver - into
extras/deprecated.
cj is/was an emergency debug tool unused in several years. Move to
extras/deprecated/vlib
Type: refactor
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: Ib55b65373f62630db295c562974bd8f2456c3107
|
|
Type: fix
Ticket: VPP-1837
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I9ec87d2293d8f92c3e488a0f61083cf815ac496c
|
|
Type: fix
Change-Id: I3c7ebbe91e7dffe9fd6851e5334fe920f2187cf0
Signed-off-by: Amir Zeidner <amirzei@mellanox.com>
|
|
DPDK recently added a check in the virtio driver to make sure that
rxmode->mq_mode == ETH_MQ_RX_NONE. We were passing ETH_MQ_RX_RSS
and the device initialization was not accepted.
The reason for the change in DPDK was that there is no controls
(algorithm, redirection table, hash function). So they thought ETH_MQ_RX_NONE
was the best choice for the value of mq_mode.
Type: fix
Ticket: VPP-1853
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: Ifa0fc4206cedc56a851f94f6434a2a7500bbd419
|
|
This patch adds support for the DPDK iAVF PMD
Type: feature
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
Change-Id: I7bb0f621774e4c55b9b7309462e6591ce1b88fb6
|
|
DPDK provides two new APIs to retrieve information about the Tx/Rx
packet burst mode:
rte_eth_tx_burst_mode_get
rte_eth_rx_burst_mode_get
This patch leverages these two APIs to describe the tx/rx mode.
Currently, Intel X710/E810 and Mellanox Mlx5 support the new APIs.
For NICs that don't support the new APIs, still use the original way
to print their tx/rx function name
Type: refactor
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
Change-Id: Ibe47f5debe3b3f17f462fbf9834394e22845cc08
|
|
Add new flow type IP4_N_TUPLE_TAGGED and IP6_N_TUPLE_TAGGED
for vlan tag sensitive flows
The original IP4_N_TUPLE and IP6_N_TUPLE will not match VLAN anymore
Type: feature
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
Change-Id: Ie511e9a64126440fe81f29665a56ca060061662d
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I5a3e3a41dcc60c0d9b291e51bb112e7701f73050
|
|
While TSO is supported for Intel NIC, Cisco VIC does not work.
The problem is due to txmode offloads is not properly set for
the Cisco VIC when enable-tcp-udp-checksum is configured.
Type: fix
Ticket: VPP-1838
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: I72c41db9b327ed8d08ef70d74e8cc6206d4a102f
|
|
Type: fix
this patch fixes mark flow deletion crash issue, see below
test flow add src-ip any proto udp src-port 111 dst-port 222 mark 100
test flow enable index 0 1/1
test flow disable index 0 1/1
test flow enable index 0 1/1
test flow disable index 0 1/1 -> [crash]
This is because the code resets a wrong vector in flow lookup entry
recycle logic. See function dpdk_flow_ops_fn().
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
Change-Id: I2b0a1e531931ab25541d672d88da18dc2289f1ce
|
|
In some cases of using vfio-pci driver, it should be required
to enable pa or va mode. Without it, rtl_eal_init unable to
allocate memory required. Debugging told that iova-mode pa/va
could help. And it helps.
This patch allows to pass iova-mode to vpp startup.conf
Type: feature
Change-Id: I36b87f5d3d141891b37cda2c306d50433954a34a
Signed-off-by: Vladimir Ratnikov <vratnikov@netgate.com>
|
|
Type: feature
Representor devices include a port ID as part of their switch_info struct, and
it is helpful to use that in the interface name.
Signed-off-by: Haggai Eran <haggai.eran@gmail.com>
Change-Id: Id24627e7daf857f8b0e8ace2f592c098678081c7
|
|
Type: feature
Output DPDK switch information to allow finding out which DPDK ports are
associated with which DPDK representor ports.
Signed-off-by: Haggai Eran <haggai.eran@gmail.com>
Change-Id: I612cbd5a97e04787eca13423f53c7283d5945e37
|
|
Not in functional state for a long time ...
Type: refactor
Change-Id: I2cc1525a6d49518cbc94faf6afbf0d2d0d515f56
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
n_retry was never decremented and so never enforced.
Type: fix
Change-Id: I71d60a72c156286f7e5b82b1c77a723361317c69
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: feature
This patch adds the ethernet type flow support
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
Change-Id: I6de163d04c6472df60a5f296fb428efd000267c4
|
|
Type: feature
This patch adds the devargs support for dpdk device
The devargs are used as hardware-specific init args for dpdk devices
please refer to the nic guides under
$(DPDK_DIR)/doc/guides/nics/$(NIC_DRIVER).rst
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
Change-Id: Id380d04720090bb66afe5ce09d664e5e248b8eb9
|
|
Type: refactor
Change-Id: I51405b9d09fb6fb03d08569369fdd4e11c647908
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: fix
This patch fixes crash issues(marked in brackets) in the below test cases
test flow enable index 0 1/1 -> [crash]
test flow disable index 0 1/1 -> [crash]
test flow add src-ip 192.168.8.8 proto udp redirect-to-queue 8
test flow enable index 0 1/1
test flow disable index 0 1/1 - [crash]
test flow add src-ip 192.168.8.8 proto udp redirect-to-queue 8
test flow enable index 0 1/1
test flow enable index 0 1/2
test flow del index 0 -> [crash]
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
Change-Id: I84bc6faa3d93a2cab4c82e8a876a8b1067257b62
|
|
Type: feature
Adding:
VNET_FLOW_TYPE_IP4_GTPC
VNET_FLOW_TYPE_IP4_GTPU
VNET_FLOW_TYPE_IP4_GTPU_IP4
VNET_FLOW_TYPE_IP4_GTPU_IP6
VNET_FLOW_TYPE_IP6_GTPC
VNET_FLOW_TYPE_IP6_GTPU
VNET_FLOW_TYPE_IP6_GTPU_IP4
VNET_FLOW_TYPE_IP6_GTPU_IP6
in this patch
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
Change-Id: I4ad53895b5ac0771432bb039b8c79e48e3c19f25
|
|
Type: fix
Change-Id: Ic221cd4fcad89aece71239ed96152bf0311f3286
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
This adds support to compile the bnxt PMD that supports Broadcom's
10/25/40/50/100/200 Gbps NICs. Tested with modified DPDK driver on
x86_64 and aarch64 targets that is pending upstream acceptance, but
should compile just fine today.
Type: feature
Signed-off-by: Andy Gospodarek <gospo@broadcom.com>
Change-Id: I735a991c4cae4fa77e5605094facea54b781a1db
|
|
Type: fix
Fix tso did not properly check the 'enable-tcp-udp-checksum' option issue
Add description of 'tso' and 'enable-tcp-udp-checksum' in startup.conf
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
Change-Id: Id659067a9fa9e1db6c3f8dc533a2e90351b86831
|
|
Type: fix
Change-Id: I44922f70aef6a3c53f0f56c6d0656502c8fd69b2
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Type: feature
Add a callback to install or remove an additional MAC address on
a DPDK-managed device. Note that some PMDs don't have support for
this so YMMV.
Change-Id: I7b0cb3fb0af0d66fbdb7b894a712897f889520a5
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Type: feature
Add 'drop' and 'redirect-to-queue' support in
'test-flow' command and DPDK plugin
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
Change-Id: I567bb77cb401c9bd1309ecabe802fe9de88c746b
|
|
Type: feature
Change-Id: I913f08383ee1c24d610c3d2aac07cef402570e2c
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Fix problem with some strings not being null-terminated,
by using the vec_terminate_c_string macro in two places.
The problem was found using AddressSanitizer.
(Also make sure indentation is OK for those changes.)
Ticket: VPP-1772
Type: fix
Signed-off-by: Elias Rudberg <elias.rudberg@bahnhof.net>
Change-Id: Ib7826e3c322e58b649e2d7f6053786da618a5e9e
|
|
Too many prefetches within loop unrollings induce bottleneck and
performance degradation on some CPUs which have less cache line fill
buffers, e.g, Arm Cortex-A72.
Apply dual loop unrolling and tune prefetches manually to remove
hot-spot with prefetch instructions, to get throughput improvement.
It brings about 1% throughput improvement and saves 8% clocks with
the target node on Cortex-A72.
Type: feature
Change-Id: If3a64a04a77e90cd0240bc4d1186dbb09dac7df0
Signed-off-by: Lijian Zhang <Lijian.Zhang@arm.com>
|
|
Extended stats are not displayed due to incorrect condition.
Type: fix
Change-Id: Ie04664e6274137462dce832bf7ee06204cd77be5
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Type: fix
Signed-off-by: John Lo <loj@cisco.com>
Change-Id: I3ee59106ba45164a4ee3788bf4dcf5bf4c2dc1c2
|
|
Type: feature
Change-Id: I16b8cdf0b6af6715a5f01ad84365a8c8a1b76237
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: feature
You can enable tso in starup.conf like this:
dev 0000:86:00.0{
tso on
}
TSO is disabled by default.
Change-Id: Ifdbaf5322f768c384aa54e532d7bf45e810ca01c
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
|