summaryrefslogtreecommitdiffstats
path: root/src/plugins/dpdk/device
AgeCommit message (Collapse)AuthorFilesLines
2020-04-22misc: fix coverity warningsDave Barach1-2/+3
Type: fix Ticket: VPP-1837 Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: I9ec87d2293d8f92c3e488a0f61083cf815ac496c
2020-04-22devices: Adding ConnectX-6 DX Device ID for validationAmir Zeidner1-2/+7
Type: fix Change-Id: I3c7ebbe91e7dffe9fd6851e5334fe920f2187cf0 Signed-off-by: Amir Zeidner <amirzei@mellanox.com>
2020-04-02dpdk: VM VHOST tests with rxq>1 failingSteven Luong1-0/+1
DPDK recently added a check in the virtio driver to make sure that rxmode->mq_mode == ETH_MQ_RX_NONE. We were passing ETH_MQ_RX_RSS and the device initialization was not accepted. The reason for the change in DPDK was that there is no controls (algorithm, redirection table, hash function). So they thought ETH_MQ_RX_NONE was the best choice for the value of mq_mode. Type: fix Ticket: VPP-1853 Signed-off-by: Steven Luong <sluong@cisco.com> Change-Id: Ifa0fc4206cedc56a851f94f6434a2a7500bbd419
2020-03-27dpdk: enable DPDK iAVF PMDChenmin Sun3-0/+23
This patch adds support for the DPDK iAVF PMD Type: feature Signed-off-by: Chenmin Sun <chenmin.sun@intel.com> Change-Id: I7bb0f621774e4c55b9b7309462e6591ce1b88fb6
2020-03-12dpdk: tx/rx burst function description refactorChenmin Sun1-6/+31
DPDK provides two new APIs to retrieve information about the Tx/Rx packet burst mode: rte_eth_tx_burst_mode_get rte_eth_rx_burst_mode_get This patch leverages these two APIs to describe the tx/rx mode. Currently, Intel X710/E810 and Mellanox Mlx5 support the new APIs. For NICs that don't support the new APIs, still use the original way to print their tx/rx function name Type: refactor Signed-off-by: Chenmin Sun <chenmin.sun@intel.com> Change-Id: Ibe47f5debe3b3f17f462fbf9834394e22845cc08
2020-03-04flow: add vlan tagged types for IPv4/IPv6 5-tuple flowsChenmin Sun1-3/+6
Add new flow type IP4_N_TUPLE_TAGGED and IP6_N_TUPLE_TAGGED for vlan tag sensitive flows The original IP4_N_TUPLE and IP6_N_TUPLE will not match VLAN anymore Type: feature Signed-off-by: Chenmin Sun <chenmin.sun@intel.com> Change-Id: Ie511e9a64126440fe81f29665a56ca060061662d
2020-02-20dpdk: rx checksum offloadFlorin Coras1-0/+8
Type: improvement Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: I5a3e3a41dcc60c0d9b291e51bb112e7701f73050
2020-02-14dpdk: TSO does not work for Cisco VICSteven Luong1-0/+11
While TSO is supported for Intel NIC, Cisco VIC does not work. The problem is due to txmode offloads is not properly set for the Cisco VIC when enable-tcp-udp-checksum is configured. Type: fix Ticket: VPP-1838 Signed-off-by: Steven Luong <sluong@cisco.com> Change-Id: I72c41db9b327ed8d08ef70d74e8cc6206d4a102f
2020-02-14dpdk: fix flow(with mark action) deletion crash issueChenmin Sun1-1/+1
Type: fix this patch fixes mark flow deletion crash issue, see below test flow add src-ip any proto udp src-port 111 dst-port 222 mark 100 test flow enable index 0 1/1 test flow disable index 0 1/1 test flow enable index 0 1/1 test flow disable index 0 1/1 -> [crash] This is because the code resets a wrong vector in flow lookup entry recycle logic. See function dpdk_flow_ops_fn(). Signed-off-by: Chenmin Sun <chenmin.sun@intel.com> Change-Id: I2b0a1e531931ab25541d672d88da18dc2289f1ce
2020-02-13dpdk: Add iova-mode to startupVladimir Ratnikov1-1/+2
In some cases of using vfio-pci driver, it should be required to enable pa or va mode. Without it, rtl_eal_init unable to allocate memory required. Debugging told that iova-mode pa/va could help. And it helps. This patch allows to pass iova-mode to vpp startup.conf Type: feature Change-Id: I36b87f5d3d141891b37cda2c306d50433954a34a Signed-off-by: Vladimir Ratnikov <vratnikov@netgate.com>
2020-02-05dpdk: use port_id as interface name suffix for representorsHaggai Eran1-1/+7
Type: feature Representor devices include a port ID as part of their switch_info struct, and it is helpful to use that in the interface name. Signed-off-by: Haggai Eran <haggai.eran@gmail.com> Change-Id: Id24627e7daf857f8b0e8ace2f592c098678081c7
2020-02-05dpdk: output switch informationHaggai Eran1-0/+21
Type: feature Output DPDK switch information to allow finding out which DPDK ports are associated with which DPDK representor ports. Signed-off-by: Haggai Eran <haggai.eran@gmail.com> Change-Id: I612cbd5a97e04787eca13423f53c7283d5945e37
2020-01-30misc: deprecate dpdk hqosDamjan Marion5-1549/+0
Not in functional state for a long time ... Type: refactor Change-Id: I2cc1525a6d49518cbc94faf6afbf0d2d0d515f56 Signed-off-by: Damjan Marion <damarion@cisco.com>
2020-01-14dpdk: enforce max tx retriesBenoît Ganne1-0/+1
n_retry was never decremented and so never enforced. Type: fix Change-Id: I71d60a72c156286f7e5b82b1c77a723361317c69 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2019-12-17flow: add ethernet flowChenmin Sun1-2/+68
Type: feature This patch adds the ethernet type flow support Signed-off-by: Chenmin Sun <chenmin.sun@intel.com> Change-Id: I6de163d04c6472df60a5f296fb428efd000267c4
2019-12-17dpdk: add devargs supportChenmin Sun3-12/+29
Type: feature This patch adds the devargs support for dpdk device The devargs are used as hardware-specific init args for dpdk devices please refer to the nic guides under $(DPDK_DIR)/doc/guides/nics/$(NIC_DRIVER).rst Signed-off-by: Chenmin Sun <chenmin.sun@intel.com> Change-Id: Id380d04720090bb66afe5ce09d664e5e248b8eb9
2019-12-04gso: remove the interface countMohsin Kazmi1-2/+0
Type: refactor Change-Id: I51405b9d09fb6fb03d08569369fdd4e11c647908 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2019-11-26flow: fix several crash issuesChenmin Sun1-2/+0
Type: fix This patch fixes crash issues(marked in brackets) in the below test cases test flow enable index 0 1/1 -> [crash] test flow disable index 0 1/1 -> [crash] test flow add src-ip 192.168.8.8 proto udp redirect-to-queue 8 test flow enable index 0 1/1 test flow disable index 0 1/1 - [crash] test flow add src-ip 192.168.8.8 proto udp redirect-to-queue 8 test flow enable index 0 1/1 test flow enable index 0 1/2 test flow del index 0 -> [crash] Signed-off-by: Chenmin Sun <chenmin.sun@intel.com> Change-Id: I84bc6faa3d93a2cab4c82e8a876a8b1067257b62
2019-11-20flow: Add GTP supportChenmin Sun1-28/+260
Type: feature Adding: VNET_FLOW_TYPE_IP4_GTPC VNET_FLOW_TYPE_IP4_GTPU VNET_FLOW_TYPE_IP4_GTPU_IP4 VNET_FLOW_TYPE_IP4_GTPU_IP6 VNET_FLOW_TYPE_IP6_GTPC VNET_FLOW_TYPE_IP6_GTPU VNET_FLOW_TYPE_IP6_GTPU_IP4 VNET_FLOW_TYPE_IP6_GTPU_IP6 in this patch Signed-off-by: Chenmin Sun <chenmin.sun@intel.com> Change-Id: I4ad53895b5ac0771432bb039b8c79e48e3c19f25
2019-11-19dpdk: fix non-NULL terminated stringBenoît Ganne1-1/+1
Type: fix Change-Id: Ic221cd4fcad89aece71239ed96152bf0311f3286 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2019-11-14dpdk: Enable bnxt PMDAndy Gospodarek3-1/+20
This adds support to compile the bnxt PMD that supports Broadcom's 10/25/40/50/100/200 Gbps NICs. Tested with modified DPDK driver on x86_64 and aarch64 targets that is pending upstream acceptance, but should compile just fine today. Type: feature Signed-off-by: Andy Gospodarek <gospo@broadcom.com> Change-Id: I735a991c4cae4fa77e5605094facea54b781a1db
2019-11-01dpdk: fix tso not properly check the 'enable-tcp-udp-checksum' option issueChenmin Sun1-16/+15
Type: fix Fix tso did not properly check the 'enable-tcp-udp-checksum' option issue Add description of 'tso' and 'enable-tcp-udp-checksum' in startup.conf Signed-off-by: Chenmin Sun <chenmin.sun@intel.com> Change-Id: Id659067a9fa9e1db6c3f8dc533a2e90351b86831
2019-10-30dpdk: use local loggerPaul Vinciguerra1-5/+5
Type: fix Change-Id: I44922f70aef6a3c53f0f56c6d0656502c8fd69b2 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-10-16dpdk: add function to add/del extra MAC addrsMatthew Smith1-0/+24
Type: feature Add a callback to install or remove an additional MAC address on a DPDK-managed device. Note that some PMDs don't have support for this so YMMV. Change-Id: I7b0cb3fb0af0d66fbdb7b894a712897f889520a5 Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2019-10-16flow: Add 'drop' and 'redirect-to-queue' actions supportChenmin Sun1-3/+20
Type: feature Add 'drop' and 'redirect-to-queue' support in 'test-flow' command and DPDK plugin Signed-off-by: Chenmin Sun <chenmin.sun@intel.com> Change-Id: I567bb77cb401c9bd1309ecabe802fe9de88c746b
2019-09-24vlib: add flag to explicitelly mark nodes which can init per-node packet traceDamjan Marion1-0/+1
Type: feature Change-Id: I913f08383ee1c24d610c3d2aac07cef402570e2c Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-09-12dpdk: fix null-termination of stringsElias Rudberg1-0/+3
Fix problem with some strings not being null-terminated, by using the vec_terminate_c_string macro in two places. The problem was found using AddressSanitizer. (Also make sure indentation is OK for those changes.) Ticket: VPP-1772 Type: fix Signed-off-by: Elias Rudberg <elias.rudberg@bahnhof.net> Change-Id: Ib7826e3c322e58b649e2d7f6053786da618a5e9e
2019-09-11dpdk: apply dual loop unrolling in DPDK TXLijian.Zhang1-0/+57
Too many prefetches within loop unrollings induce bottleneck and performance degradation on some CPUs which have less cache line fill buffers, e.g, Arm Cortex-A72. Apply dual loop unrolling and tune prefetches manually to remove hot-spot with prefetch instructions, to get throughput improvement. It brings about 1% throughput improvement and saves 8% clocks with the target node on Cortex-A72. Type: feature Change-Id: If3a64a04a77e90cd0240bc4d1186dbb09dac7df0 Signed-off-by: Lijian Zhang <Lijian.Zhang@arm.com>
2019-09-05dpdk: fix extended statsFilip Tehlar1-1/+1
Extended stats are not displayed due to incorrect condition. Type: fix Change-Id: Ie04664e6274137462dce832bf7ee06204cd77be5 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2019-08-30dpdk: enable checksum offload for Intel SRIOV NIC driversJohn Lo1-0/+8
Type: fix Signed-off-by: John Lo <loj@cisco.com> Change-Id: I3ee59106ba45164a4ee3788bf4dcf5bf4c2dc1c2
2019-08-21dpdk: bump DPDK version to 19.08Damjan Marion3-7/+4
Type: feature Change-Id: I16b8cdf0b6af6715a5f01ad84365a8c8a1b76237 Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-08-19dpdk: add TSO support in dpdk plugin.Chenmin Sun3-1/+44
Type: feature You can enable tso in starup.conf like this: dev 0000:86:00.0{ tso on } TSO is disabled by default. Change-Id: Ifdbaf5322f768c384aa54e532d7bf45e810ca01c Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
2019-08-19dpdk: QAT devices update, add c4xxx and xeon d15xxJim Thompson1-1/+2
Type: feature Change-Id: I21f8f4563f5545a684b2666f7410847e0f7bc403 Signed-off-by: Jim Thompson <jim@netgate.com>
2019-08-06dpdk: remove SFP eeprom dump from 'show hardware-interfaces' and 'show ↵Lijian.Zhang1-2/+5
hardware-interfaces verbose' Type: fix It's time-consuming to execute 'show hardware-interfaces detail' in CSIT script. 'show hardware-interfaces' dumps SFP eeprom, via a software emulated I2C bus. Currently 'show hardware-interfaces', 'show hardware-interfaces verbose' and 'show hardware-interfaces detail' give exactly the same output, and they all will dump SFP eeprom. Will move the SFP eeprom dump to 'show hardware-interfaces detail' only, and use “show hardware-interfaces verbose” in CSIT script to save time. Change-Id: I1a6e5a0ca5fce5b4f0b9a6eb4e9dfd76d45b2487 Signed-off-by: Lijian Zhang <Lijian.Zhang@arm.com>
2019-07-26dpdk: fix vlan strippingNeale Ranns1-11/+15
Type: fix Fixes: ce3e971 Change-Id: I30bbeced2f5ae7613e65546f2b9b41e2fb514208 Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-07-24dpdk: Prefetch correct size of rte_mbufNitin Saxena1-1/+1
sizeof(rte_mbuf) is 128 byte but 2* CLIB_CACHE_LINE_BYTES is 256 byte for ThunderX/OCTEONTx targets. Type: fix Change-Id: If6893b168cf1c55c44bf4669a888ce858f2ef487 Signed-off-by: Nitin Saxena <nsaxena@marvell.com>
2019-07-18vlib: convert frame_index into real pointersAndreas Schultz1-1/+1
The fast path almost always has to deal with the real pointers. Deriving the frame pointer from a frame_index requires a load of the 32bit frame_index from memory, another 64bit load of the heap base pointer and some calculations. Lets store the full pointer instead and do a single 64bit load only. This helps avoiding problems when the heap is grown and frames are allocated below vm->heap_aligned_base. Type: refactor Change-Id: Ifa6e6e984aafe1e2755bff80f0a4dfcddee3623c Signed-off-by: Andreas Schultz <andreas.schultz@travelping.com> Signed-off-by: Dave Barach <dave@barachs.net>
2019-06-06dpdk: fix clear hw statsFilip Tehlar3-3/+3
.. and remove helper stat struct for keeping last cleared stats. This is not needed anymore as dpdk lib provides rte_eth_dev_reset(). Change-Id: I78076e689aac7ca70836ce688dfa8e704f64cd84 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2019-06-04dpdk: rework extended statsFilip Tehlar4-47/+33
Change-Id: I421192e1921d4c9c5486a6dcca745582aebf4e3e Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2019-05-31Update vnet hardware flags if link state changesDave Barach1-1/+9
Explains a variety of hard-to-diagnose problems with certain Atom and Denverton NIC types. I finally tripped over a highly-repeatable failure: home gateway use-case bitten by refusal to negotiate a DHCP lease for the trunk port. The dhcp client won't send pkts unless VNET_HW_INTERFACE_FLAG_LINK_UP is set on the tx hw interface: /* Interface(s) down? */ if ((hw->flags & VNET_HW_INTERFACE_FLAG_LINK_UP) == 0) return; Change-Id: I17ef2ba7b39078555fa27d2d874a60c67e1530ee Signed-off-by: Dave Barach <dave@barachs.net>
2019-05-31bonding: add support for numa awarenessZhiyong Yang1-0/+1
This patch enables bonding numa awareness on multi-socket server working in active-backeup mode. The VPP adds capability for automatically preferring slave with local numa node in order to reduces the load on the QPI-bus and improve system overall performance in multi-socket use cases. Users doesn't need to add any extra operation as usual. Change-Id: Iec267375fc399a9a0c0a7dca649fadb994d36671 Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
2019-05-30dpdk: remove bonding codeDamjan Marion6-251/+11
We have native implementation and we should not maintain both.... Change-Id: Ic09ebffda52cdc733b3cfeff06690e0d3cc08084 Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-05-29dpdk: make sure each segment have initalized rte_mbufDamjan Marion1-12/+4
Change-Id: I0e28d059143fb7489d27a10c5b4a152d0d7dfb1f Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-05-27dpdk: vlan strip config does not take effect in default deviceChenmin Sun1-0/+6
copy vlan strip config from default device Change-Id: I4ad1c159bad964fd1900b5ae4960b7014dd9f9b1 Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
2019-05-27dpdk: fix rss configuration error issueChenmin Sun1-7/+5
Reorder foreach_dpdk_rss_hf to fix rss configuration error issue. Change-Id: Idec45534cd7dfe810b25584b1b27ac52b1c45110 Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
2019-05-23fix rte_eth_dev_info’ has no member named ‘pci_dev’ when run ↵cohu1-5/+9
show_dpdk_hqos_queue_stats Change-Id: Ic1a900e0fb85ee016af21535764dfca2e6282194 Signed-off-by: cohu <cong.hu@tieto.com>
2019-05-16init / exit function orderingDave Barach3-5/+9
The vlib init function subsystem now supports a mix of procedural and formally-specified ordering constraints. We should eliminate procedural knowledge wherever possible. The following schemes are *roughly* equivalent: static clib_error_t *init_runs_first (vlib_main_t *vm) { clib_error_t *error; ... do some stuff... if ((error = vlib_call_init_function (init_runs_next))) return error; ... } VLIB_INIT_FUNCTION (init_runs_first); and static clib_error_t *init_runs_first (vlib_main_t *vm) { ... do some stuff... } VLIB_INIT_FUNCTION (init_runs_first) = { .runs_before = VLIB_INITS("init_runs_next"), }; The first form will [most likely] call "init_runs_next" on the spot. The second form means that "init_runs_first" runs before "init_runs_next," possibly much earlier in the sequence. Please DO NOT construct sets of init functions where A before B actually means A *right before* B. It's not necessary - simply combine A and B - and it leads to hugely annoying debugging exercises when trying to switch from ad-hoc procedural ordering constraints to formal ordering constraints. Change-Id: I5e4353503bf43b4acb11a45fb33c79a5ade8426c Signed-off-by: Dave Barach <dave@barachs.net>
2019-05-09dpdk: fix return variable sizeZhiyong Yang1-2/+2
The function dpdk_ol_flags_extract should return u16 instead of u8. Change-Id: Id0b08b04c93598818f9a2eee5a88733900320dfa Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
2019-04-25Change dpdk thread data flags type to u16 from u8 to get more useful dataSimon Zhang2-6/+7
Change-Id: Idc3763c38f5aa638d4f290f4d4730577601d78b8 Signed-off-by: Simon Zhang <yuwei1.zhang@intel.com>
2019-04-24dpdk: fix interface namingFlorin Coras1-1/+1
Change-Id: Ia092a93a7ac0cbf9338f9d4a5db8b94b23549a13 Signed-off-by: Florin Coras <fcoras@cisco.com>