Age | Commit message (Collapse) | Author | Files | Lines |
|
This is because mlx5_pci is also compatible with another
series of NICs such as ConnectX-5 and ConnectX-6.
Type: fix
Change-Id: I10f0468bbe36ab61c72fb3dc0aa898f8e2f9e88c
Signed-off-by: Nobuhiro MIKI <nmiki@yahoo-corp.jp>
|
|
DPDK added new Rx checksum flags[1] to handle cases like the virtual
drivers. Current check of flags is not strict enough for flags like
RTE_MBUF_F_RX_IP_CKSUM_NONE and will always be true no matter the
checksum in packet is good or bad.
Fix this issue by comparing the result of AND operation with the
correspinding Rx checksum flags.
Before this patch, packet trace prints the offload flags as below:
Packet Offload Flags
PKT_RX_IP_CKSUM_GOOD (0x0080) IP cksum of RX pkt. is valid
PKT_RX_IP_CKSUM_NONE (0x0090) no IP cksum of RX pkt.
PKT_RX_L4_CKSUM_GOOD (0x0100) L4 cksum of RX pkt. is valid
PKT_RX_L4_CKSUM_NONE (0x0108) no L4 cksum of RX pkt.
After this patch, packet offload flags would be like:
Packet Offload Flags
PKT_RX_IP_CKSUM_GOOD (0x0080) IP cksum of RX pkt. is valid
PKT_RX_L4_CKSUM_GOOD (0x0100) L4 cksum of RX pkt. is valid
Type: fix
[1] https://github.com/DPDK/dpdk/commit/5842289a546ceb0072bd7faccb93821e21848e07
Signed-off-by: Jieqiang Wang <jieqiang.wang@arm.com>
Change-Id: I3182022d9ccd46b2fc55bb3edfbfac9062ed7c89
|
|
Type: improvement
Change-Id: If775b1d145e462346de562a3c893f302e8c7b814
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
List BlueField NICs as a supported PCI devices.
Type: feature
Change-Id: Ida2300df516ab9cd2fcde1f816bbdc081016039a
Signed-off-by: Alexander Kozyrev <akozyrev@nvidia.com>
|
|
This patch adds support for using l2tpv3 as RSS type
Type: feature
Signed-off-by: Xinyao Cai <xinyao.cai@intel.com>
Change-Id: Ic3e0935a4754d084184f1cc38ea9531ddfd9e7bc
|
|
List Mellanox ConnectX-6LX and ConnectX-7 as a supported PCI devices.
Type: feature
Change-Id: Ieeca3f214d08f29238c387354055ac1320cab75f
Signed-off-by: Alexander Kozyrev <akozyrev@nvidia.com>
|
|
clang-16 complains about signed one-bit bitfield value changes
from 1 to -1. Use unsigned type instead.
Type: fix
Signed-off-by: Tianyu Li <tianyu.li@arm.com>
Change-Id: I84f8cf314d36183a5e6f544cd756c01d1d10a1a5
|
|
Signed-off-by: Andrew Ying <hi@andrewying.com>
Type: fix
Change-Id: I3c428c90146387ad9ce291c7f646d74f06952b40
|
|
When I setup vpp by netvsc driver, occurs the following crash:
(format_dpdk_device_name) assertion `(i) < vec_len (dm->devices)' fails
vnet[100166]: #6 0x00007f434d651f6a _clib_error + 0x2da
vnet[100166]: #7 0x00007f430b4bef64 format_dpdk_device_name + 0xf4
vnet[100166]: #8 0x00007f434d6555f3 do_percent + 0xee3
vnet[100166]: #9 0x00007f434d654359 va_format + 0xb9
vnet[100166]: #10 0x00007f434d7ac16e vlib_log + 0x3ce
vnet[100166]: #11 0x00007f430b49ebe3 dpdk_device_start + 0x193
vnet[100166]: #12 0x00007f430b4aa233 dpdk_interface_admin_up_down + 0x163
vnet[100166]: #13 0x00007f434d988fc8 vnet_sw_interface_set_flags_helper + 0x378
vnet[100166]: #14 0x00007f434d989338 vnet_sw_interface_set_flags + 0x48
This patch fix it by device_index as a index for devices vec, and not
dpdk port_id.
Type: fix
Change-Id: I84c46616d06117c9ae3b2c7d0473050f1b8ded5f
Signed-off-by: Daniel Ding <danieldin95@163.com>
|
|
Type: fix
Signed-off-by: Xiaoming Jiang <jiangxiaoming@outlook.com>
Change-Id: I9971e69135e0652a36e4b4754774a43ea1d92e8b
|
|
Prior to dpdk-22.11, VPP can count on rte_eth_dev_socket_id to return
numa node 0 if the device didn't set it. Ever since below patch is
committed in dpdk
https://patchwork.dpdk.org/project/dpdk/patch/20220929120512.480-1-olivier.matz@6wind.com/#152498
the aforementioned assumption is no longer true. If the device didn't
set the numa node, VPP gets -1 from the aforementioned API call. This
causes VPP to crash.
This fix is to set the numa node to 0 if the API returns -1, or SOCKET_ID_ANY
Type: fix
Change-Id: I2fde2870e5a3eb98473fe8d119fef594bfba9a8d
Signed-off-by: Steven Luong <sluong@cisco.com>
|
|
This patch prepares code for bumping DPDK version to 22.11, but the DPDK version of this patch keeps at 22.07 for compatibility.
the "no-dsa" parameter in DPDK configuration is removed, the "blacklist" parameter can be used to block the related DSA devices.
Type: feature
Signed-off-by: Xinyao Cai <xinyao.cai@intel.com>
Change-Id: I08787c6584bba66383fc0a784963f33171196910
|
|
Recognize and drive google virtual ethernet (gve) in google cloud.
Type: feature
Signed-off-by: Marvin Liu <yong.liu@intel.com>
Change-Id: Ia559615ac059cabbca5d10bcd4049e87beaad638
|
|
Witout thread barrier, when dpdk_process_node initiating
dpdk lib, workers thread may also be initiating. Main
and workers threads may both setting error_main info,
that will cause memory ASAN issue.
Type: fix
Signed-off-by: Xiaoming Jiang <jiangxiaoming@outlook.com>
Change-Id: I87b73b310730719035d4985a2cff2e3308120ec2
|
|
This patch introduces IP in IP packet support for flow cli and dpdk plugin.
Specifically, the following IP in IP packet types are supported:
MAC-IPv4-IPv4-TCP/UDP/None,
MAC-IPv4-IPv6-TCP/UDP/None,
MAC-IPv6-IPv4-TCP/UDP/None,
MAC-IPv6-IPv6-TCP/UDP/None,
IP in IP flow rules can be created by using the following new keywords in vppctl:
in-src-ip, in-dst-ip : to provide information for inner IPv4 header
in-ip6-src-ip, in-ip6-dst-ip: to provide information for inner IPv6 header
in-proto : to specify inner transport layer protocol type (TCP or UDP)
in-src-port, in-dst-port : to provide information for inner TCP/UDP header
An example to create flow rule for MAC-IPv6-IPv6-TCP:
test flow add index 0 ip6-src-ip any ip6-dst-ip any in-ip6-src-ip any in-ip6-dst-ip any in-proto tcp in-src-port 1234 in-dst-port any rss function default
Another example to create flow rule for MAC-IPv6-IPv6:
test flow add index 0 ip6-src-ip any in-ip6-src-ip any rss function default
Type: feature
Signed-off-by: Xinyao Cai <xinyao.cai@intel.com>
Change-Id: I6a1ca36d47eb65b9cb5a4b8d874b2a7f017c35cd
|
|
In current flow creating process in native avf and dpdk-plugins, when
parsing the input arguments, it does not copy IPv6 src address correctly,
so that IPv6 src address will not be configured in any flow rule, and
any packet with the same address will not be matched.
Type: fix
Signed-off-by: Ting Xu <ting.xu@intel.com>
Change-Id: Ic957c57e3e1488b74e6281f4ed1df7fd491af35c
|
|
This patch allows to pass a tag when specifying
the dpdk `dev { }` interface configuration.
It allows a control plane generating a vpp.conf
file to retreive the resulting mapping between
dpdk interfaces & sw_if_indices in VPP without
having to change the interface name exposed
to the user.
Type: feature
Change-Id: I55907417de0083b82d4a127172816cec3459acf3
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
per https://jira.fd.io/browse/VPP-2058
Type: improvement
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: Ica0828de218d25ada2d0d1491e373c3b78179ac1
|
|
Type: improvement
Change-Id: Ifea4badd58f7e2b5e792d7506f6747851a08587f
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: feature
Signed-off-by: Vladimir Ratnikov <vratnikov@netgate.com>
Change-Id: I2fd1e321983ac5caa03aac8705dfc596985c35f7
|
|
This patch introduces DMA infrastructure into vlib. This is well known
that large amount of memory movements will drain core resource. Nowadays
more and more hardware accelerators were designed out for freeing core
from this burden. Meanwhile some restrictions still remained when
utilizing hardware accelerators, e.g. cross numa throughput will have a
significant drop compared to same node. Normally the number of hardware
accelerator instances will less than cores number, not to mention that
applications number will even beyond the number of cores. Some hardware
may support share virtual address with cores, while others are not.
Here we introduce new DMA infrastructure which can fulfill the
requirements of vpp applications like session and memif and in the
meantime dealing with hardware limitations.
Here is some design backgrounds:
Backend is the abstract of resource which allocated from DMA device
and can do some basic operations like configuration, DMA copy and
result query.
Config is the abstract of application DMA requirement. Application
need to request an unique config index from DMA infrastructure. This
unique config index is associated with backend resource. Two options
cpu fallback and barrier before last can be specified in config.
DMA transfer will be performed by CPU when backend is busy if cpu
fallback option is enabled. DMA transfer callback will be in order
if barrier before last option is enabled.
We constructs all the stuffs that DMA transfer request needed into
DMA batch. It contains the pattern of DMA descriptors and function
pointers for submission and callback. One DMA transfer request need
multiple times batch update and one time batch submission.
DMA backends will assigned to config's workers threads equally. Lock
will be used for thread-safety if same backends assigned to multiple
threads. Backend node will check all the pending requests in worker
thread and do callback with the pointer of DMA batch if transfer
completed. Application can utilize cookie in DMA batch for selves
usage.
DMA architecture:
+----------+ +----------+ +----------+ +----------+
| Config1 | | Config2 | | Config1 | | Config2 |
+----------+ +----------+ +----------+ +----------+
|| || || ||
+-------------------------+ +-------------------------+
| DMA polling thread A | | DMA polling thread B |
+-------------------------+ +-------------------------+
|| ||
+----------+ +----------+
| Backend1 | | Backend2 |
+----------+ +----------+
Type: feature
Signed-off-by: Marvin Liu <yong.liu@intel.com>
Change-Id: I1725e0c26687985aac29618c9abe4f5e0de08ebf
|
|
Type: feature
Change-Id: I0abbe925d6b9d3dd7196cd8beaf4f471beb45bd6
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Build vpp with MLX DPDK PMD,
make DPDK_MLX4_PMD=y DPDK_MLX5_PMD=y DPDK_MLX5_COMMON_PMD=y build-release
With no-multi-seg in startup.conf,
Mellanox NIC init failed with following message,
rte_eth_rx_queue_setup[port:2, errno:-12]: Unknown error -12
mlx5_net: port 2 Rx queue 0: Scatter offload is not configured and
no enough mbuf space(2176) to contain the maximum RX packet length(2065)
with head-room(128)
In Mellanox NIC PMD driver, 'di.max_rx_pktlen' is returned as 65536,
and 'di.max_mtu' is returned as 65535, which makes
the driver_frame_overhead logic not suitable for Mellanox NICs.
So skip the logic code if MAX_MTU is returned as 65535.
Type: fix
Fixes: 1cd0e5dd533f ("vnet: distinguish between max_frame_size and MTU")
Signed-off-by: Tianyu Li <tianyu.li@arm.com>
Change-Id: I027b76b8d07fb453015b8eebb36d160b4bc8df9c
|
|
Type: improvement
Enable use of 4th gen QAT devices. Will be available on Sapphire Rapids.
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
Change-Id: I89e7d29e10ecb4c36c700ff5e017796161ec6c5e
|
|
Type: fix
Correct vnet_hw_interface_t flags update on link state changes.
Currently incomplete set of flags is applied on each change,
only flags related to the most recent change are being set correct.
E.g. setting the link up would erase the duplex part of the flags.
Signed-off-by: Alexander Skorichenko <askorichenko@netgate.com>
Change-Id: I5b95e1c0eaea0c283b108dbf7f809682ec9064eb
|
|
Type: fix
There were several places where mbps were converted to kbps for
link_speed, but often drivers of devices set link speed to unknown
(0xFFFFFFFF) on initialization, so there was multiplication of
link_speed equal 0xFFFFFFFF(UINT32_MAX) by 1000, this provides
overflow of unsigned int, and as result link_speed was equal
4295 Gbps, but actually link_speed is unknown.
Signed-off-by: Anton Nikolaev <anikolaev@netgate.com>
Change-Id: Ib462ed6ed685654af4687041e115bfb74e640f13
|
|
When the driver's max_rx_pktlen is >= 65536, max_supported_frame_size
overflows and queue creation fails.
Change-Id: If78707cb698adf8619ec44a852dd05d570917577
Signed-off-by: Mohammed Hawari <mohammed@hawari.fr>
Type: fix
|
|
Enable the flow action for RSS queue group. Packets can be distributed
among queues in group based on specific fields. Queues must be continous
in the group. This feature is to support 5G enhancement requirement.
Type: feature
Signed-off-by: Ting Xu <ting.xu@intel.com>
Change-Id: I74fdc617659bcb61f00b3b1934c95ab1c73bb8f3
|
|
Type: improvement
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
Change-Id: I9f061a05d947bc2867e1b962bf0522ad344bcc1a
|
|
New dpdk version deprecates some macros used by VPP.
This patch changes them to 22.03 version.
Type: improvement
Signed-off-by: Dastin Wilski <dastin.wilski@gmail.com>
Change-Id: Ic362ed318dc1ad88bb682ef13fbd6159171fbaef
|
|
New version of dpdk changes some macros names.
This patch ensures VPP will be compatible with older dpdk versions.
Type: improvement
Signed-off-by: Dastin Wilski <dastin.wilski@gmail.com>
Change-Id: I3d9736278e70064610a1dcad5f2d2f6eb26e0d4b
|
|
Type: fix
Change-Id: I70f9ec2eb6c9c1494a4ecd56e06898f6162a0e0e
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Use of _vec_len() to set vector length breaks address sanitizer.
Users should use vec_set_len(), vec_inc_len(), vec_dec_len () instead.
Type: improvement
Change-Id: I441ae948771eb21c23a61f3ff9163bdad74a2cb8
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: fix
VLAN programming is currently enabled for IXGBE. However, that is only
supported for IXGBE_VF.
With this fix, disable VLAN programming for IXGBE.
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
Change-Id: I37b1d0733988c964d2b0f5a49328effacec1cb6f
|
|
Type: fix
This patch fixes the following DPDK plugin issue:
CID 253333: Control flow issues (DEADCODE)
The change also includes some cosmetic changes for error
handling.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Change-Id: I830020bc3ae9a508f3a905f78333fa3ae25ce784
|
|
Type: fix
Change-Id: I857403b9d93ee4c17f2dd5ac8e6dafd66260a252
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
The way of specifying which interface supports what has changed.
Re-add support for adaptive mode in virtio.
Type: fix
Signed-off-by: Paul Atkins <patkins@graphiant.com>
Change-Id: I2f8ffa6311a4081b93fb08a7e92408b8bffbae64
|
|
The support for interrupt mode is not being respected as it is not
copied into the driver conf, which is what is checked when trying to
enable it.
Type: fix
Signed-off-by: Paul Atkins <patkins@graphiant.com>
Change-Id: I2e502306e27bd98f8037d1a0a396201e099b50b5
|
|
Use of clib_mem_is_heap_object is not reliable enough for production use
as it relies on just few bytes of memory allocator chunk header.
Type: improvement
Change-Id: I48c8adde8b6348b15477e3a015ba515eb7ee7ec2
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: fix
Fixes: 65105c95fe03 ("dpdk: improve logging")
Signed-off-by: Tianyu Li <tianyu.li@arm.com>
Change-Id: I69d616c7e6e7b5395ebf083b1ac5c3e85f99bbdd
|
|
In order to support the requirement of RSS and packet steering of new
protocols, such as GTPU PDU-type and QFI, for 5G UPF, a generic pattern
is introduced in vnet flow. The generic flow pattern is based on DDP
(Dynamic Device Personalization) function and Parser Library module in
DPDK. Using generic flow pattern, we do not need to create new packet
and field type and offset in API parser for every new protocols. We can
create flows for any protocol immediately as long as supported by DDP.
The generic flow can be used to support 5G related protocols in
different scenarios.
The input of this generic pattern are two binary strings for spec and
mask. Spec is the binary presentation of the target packet type, and
mask is used to mark the target fields.
In this patch DPDK plugins is enabled for POC. Next step we will enable
generic flow in native IAVF, which is the main target.
Here is an example. If we want to create a flow for GTPU QFI,
spec is:
00000000000100000000000208004500003C00000000001100000101010102020202000
008680028000034FF001C00000000000000850100010045000014000000000000000001
01010102020202
mask is:
00000000000000000000000000000000000000000000000000000000000000000000000
000000000000000000000000000000000000000007F0000000000000000000000000000
00000000000000
A naming API POC is created via VAPI to help create the rule with
the target packet format similar to Scapy. It is based on a function
module called PacketForge. In this way, the user no need to create
binary string spec and mask by themselves.
Type: feature
Signed-off-by: Ting Xu <ting.xu@intel.com>
Change-Id: Id3444f95c158bdcdfeeee19d795cd9ecbeeec07c
|
|
Type: improvement
This patch improves the per dpdk-input loop number of packets
received from the port. The change mimics how packets rx happened
before VPP 22.02/DPDK 21.11: instead of trying to rx huge number
of packets (256) in one go, rx more times with up to 32 packets
max each time.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Change-Id: I804dce6d9121ab21b02e53dd0328dc52ac49d80f
|
|
Type: refactor
Change-Id: Ieb7a595e40d801af5349c83b128fa92c7698a346
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Recent "dpdk: refactor device setup" have broken vlans programming for IXGBE_VF.
Type: fix
Signed-off-by: Dzmitry Sautsa <dzmitry.sautsa@nokia.com>
Change-Id: Idacda33a473f6b10dbe002d9926661a19d0f3f97
|
|
Type: feature
Signed-off-by: Vladimir Ratnikov <vratnikov@netgate.com>
Change-Id: I2fd12a5b30aacdbaecb9156b829bfc06dfea377f
|
|
Type: fix
Since commit https://github.com/DPDK/dpdk/commit/e2a6d08bef489215ebb77b1d3033875ada757cfa
DPDK started advertising scattered Rx feature for elastic network adapters. Thus, dpdk
plugin doesn't have to disable it for ENA by default anymore
Signed-off-by: akolechk <akolechk@cisco.com>
Change-Id: I2d4f429be992e3c4edcc0c3adf8c55f3d5381631
|
|
Type: refactor
IP4 does not depend on TCP (it's the other way around).
This upside down dependency leads to some nasty circular includes when trying to use ip46_address.h in interface.h
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I4a1bd21543b08b9c1cf1e5563da738414734a878
|
|
rte_eth_tx_burst() returns the number of packets actually stored in
transmit descriptors and the return type is uint16. n_sent cannot be
negative and the if branch is dead code.
Type: improvement
Change-Id: Idc2980d342756c1093ddf74ea6207d072e819331
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: fix
Change-Id: Ic5b74fb7a8e479e8cdccbb6a564ff3fdd299455c
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Also improve logging....
Type: fix
Change-Id: I3d3aee52cd45e59ecd6ce13bd516c66559638fec
Signed-off-by: Damjan Marion <damarion@cisco.com>
|