Age | Commit message (Collapse) | Author | Files | Lines |
|
This patch fixes a vxlan flow type checking bug which is introduced in
commit 7a016e87e473.
It is the native avf instead of dpdk that doesn't support vxlan flow offloading.
So this patch removes Vxlan flow supporting in native avf_plugin and adds
the vxlan flow back to dpdk_plugin.
Type: fix
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
Change-Id: I1a72629cee462b890327c589c846f6d532b2d61d
|
|
Type: fix
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
Change-Id: I215b660a466e0579918e49de543163fd28f95c22
|
|
This patch fixes the below bugs in avf flow:
1. remove the VXLAN flow as it is not yet supported
2. fix a typo in IPv6 flow
3. fix the wrong type of the AH flows
Also did some cleanup in this patch
Type: fix
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
Change-Id: I5eae131f1e89071364a41b7006a00e8425089a4f
|
|
Type: improvement
Change-Id: I73383eb15186021cd6527d112da8443a0082f129
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: improvement
This patch adds flags to represent the modern NICs capabilities.
Change-Id: I96d38d9ab7eac55974d72795cd100d8337168e1e
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
It is well known that for some NICs, masking
interrupts results in delaying desc writebacks,
which breaks poll mode. This fix introduces an
"int-unmaskable" dpdk device flag to identify such
devices (typically Intel FVL). For such devices,
interrupts are masked by a call to
file_update(...,UNIX_FILE_UPDATE_DELETE) instead
of rte_eth_dev_rx_intr_disable (...)
Change-Id: Ifbc701aebe8572319b7aae19382bd683a47fc3cf
Type: fix
Fixes: 19ff0c3699342b512c03362b3815df684a661f49
Signed-off-by: Mohammed Hawari <mohammed@hawari.fr>
|
|
Change-Id: I6ababc99ecf559327a4370914580c98d32680175
Type: feature
Signed-off-by: Mohammed Hawari <mohammed@hawari.fr>
|
|
Enable DPDK AVX-512 Vector PMDs on Intel Icelake
Type: improvement
Signed-off-by: Ray Kinsella <mdr@ashroe.eu>
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Change-Id: Ie5d5bf54ccaa65c1d053d56a2f2973fe8625193b
|
|
Type: refactor
This patch refactors the offload flags in vlib_buffer_t.
There are two main reasons behind this refactoring.
First, offload flags are insufficient to represent outer
and inner headers offloads. Second, room for these flags
in first cacheline of vlib_buffer_t is also limited.
This patch introduces a generic offload flag in first
cacheline. And detailed offload flags in 2nd cacheline
of the structure for performance optimization.
Change-Id: Icc363a142fb9208ec7113ab5bbfc8230181f6004
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
u32[0] is not enough unique for some platforms like azure
where several devices(not only network) can have almost
the same addresses and this can cause collisions.
Change hash to mhash type for vmbus devices with key
of whole 16 bytes of vmbus address.
Type: improvement
Signed-off-by: Vladimir Ratnikov <vratnikov@netgate.com>
Change-Id: Ic6c6a657ae29f45beddd0c69d8e785e702349460
|
|
Asking for TSO (TCP Segmentation Offload) on packets that are already
smaller than (headers + MSS) does not make sense and may not work
on some HW.
Fix to only set the TSO flag when a segmentation offload is
really required, i.e when packet is large enough.
Type: improvement
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Change-Id: I7830ae8474581c8e518fb4910f7863e10346bb62
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
|
|
Type: improvement
Change-Id: I4008cadfd5141f921afbdc09a3ebcd1dcf88eb29
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: fix
When a device is whitelisted with devargs arguments specified, the
string that is generated and added to conf->eal_init_args is not
explicitly terminated with 0. If the formatted string takes up all
of the memory allocated to the vector which stores it and it is
used later as a string in a format() or printf() call, any nonzero
characters stored in memory at the address immediately following the
memory allocated for the vector will be erroneously appended to the
string.
Terminate the string with 0 to ensure that this does not happen.
Change-Id: I20a78d994daad93bf5aecab5c03d705022e882ec
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
now startup.conf supports confuguration for VMBUS
devices as for PCI devices for whitelisting/blacklisting
dpdk { dev fa5a6e7a-cf3a-4b98-9569-addb479b84bc }
with sub-configuration as for PCI devices
dpdk { blacklist fa5a6e7a-cf3a-4b98-9569-addb479b84bc }
where fa5a6e7a-cf3a-4b98-9569-addb479b84bc - example of UUID
struct vlib_vmbus_addr_t changed to union with UUID described
fields
Added device_config_index_by_vmbus_addr
blacklist_by_vmbus_addr
to enumerate available device configs
hash_key is as_u32[0] field(last 4 bytes of UUID)
Lost of precision against full UUID, but 2^32 is enough
to handle all the devices available
Added is_blacklisted check while creating vnet devices in
order to supress creation of dev if it's blacklisted
Type: feature
Signed-off-by: Vladimir Ratnikov <vratnikov@netgate.com>
Change-Id: Id82611e54fed082190e488c7e5fbe14ecbe5b2ab
|
|
Type: refactor
Change-Id: I077110e1a422722e20aa546a6f3224c06ab0cde5
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: refactor
Change-Id: Ie67dc579e88132ddb1ee4a34cb69f96920101772
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: feature
This patch bumps DPDK to 20.11. In addtion a few changes are
made:
- Changed dynamic rx offload flag display.
- Updated deprecating options.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Change-Id: I6e4399d551a7eb8e1a9fc9ef6e39e74266450ad4
|
|
When running with `dpdk { no-hugetlb }` dont try
to allocate hugepages and remove --in-memory as
this seems to be rejected by DPDK
Type: fix
Change-Id: I02c56ade0b4e706b3f76331745e2af64bb62f6e0
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
Currently thread with telemetry is enabled by default, to prevent
to use resources, thread should be off. The thread can be switch on
back using additional option in the dpdk's stanza.
dpdk {
telemetry
}
Type: feature
Change-Id: I1c25e8ee99f31dd01dc372f54e77e81a5bb67126
Signed-off-by: Dmitry Vakrhushev <dmitry@netgate.com>
|
|
Type: fix
With DPDK 20.08, mlx5 devices get bound to the mlx5_pci PMD instead
of net_mlx5. Update the name in foreach_dpdk_pmd so the PMD will be
correctly recognized during initialization.
Change-Id: I1863ec55da9fcf6a289959dff22ca2dcc5d114bc
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
When using classifier to filter traces, not all packets will be traced.
In that case, we should only count traced packets.
Type: fix
Change-Id: I87d1e217b580ebff8c6ade7860eb43950420ae78
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
If VPP is started in interactive mode, instead of sending logs to syslog
server we print them directly to stderr.
Output is colorized, but that can be turned off with unix { nocolor }
Type: improvement
Change-Id: I9a0f0803e4cba2849a6efa0b6a86b9614ed33ced
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
When creating a VLAN sub-interface on a Fortville i40e DPDK VF,
the data plane does not work properly.
Enabling vlan filter offload overrides the VLAN strip offload setting to on.
The VLAN strip offload must be disabled for VPP VLAN sub-interfaces to work.
Ticket: https://jira.fd.io/browse/VPP-1933
Type: fix
Signed-off-by: Dimitrios Markou <dimitrios.markou@est.tech>
Change-Id: I02c6980e3b01870b69a9375f281125ad48477827
|
|
clang-11 complains:
error: field 'buffer_template' with variable sized type 'vlib_buffer_t' not at the end of a struct or class is a GNU extension [-Werror,-Wgnu-variable-sized-type-not-at-end]
Type: improvement
Change-Id: I2cb6b4fde723a05b42cf33dd8130df074f0362ab
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: fix
Fixes: ed04407829728c5d258b6600155edabd5198d971
Signed-off-by: Vladimir Ratnikov <vratnikov@netgate.com>
Change-Id: I5aebcba7b97db758310042fd446328ee8f691641
|
|
Type: fix
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
Change-Id: Ie328834159687cdb4314c37d36697f2fb9081fbd
|
|
This patch adds the RSS steering queues set interface, and it's
implementation in DPDK device:
/* Interface to set rss queues of the interface */
typedef clib_error_t *(vnet_interface_rss_queues_set_t)
(struct vnet_main_t * vnm, struct vnet_hw_interface_t * hi,
clib_bitmap_t *bitmap);
This patch also introduces a command line to set the RSS queues:
set interface rss queues <interface> <list <queue-list>>
To display the rss queues, use "show hardware-interfaces"
Below is the example to configure rss queues for interface Gig0:
vpp# set interface rss queues Gig0 list 0,2,4-7
vpp# show hardware-interfaces brief
Name Idx Link Hardware
VirtualFunctionEthernet18/1/0 1 down VirtualFunctionEthernet18/1/0
Link speed: unknown
RSS queues: 0 2 4 5 6 7
local0 0 down local0
Link speed: unknown
vpp#
Users can also configure the rss queues on a dpdk interface in
startup.conf:
dpdk {
dev 0000:18:01.0 {
rss-queues 0,2,5-7
}
}
Type: feature
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
Change-Id: I1835595a1c54016a84eabee9fd62ce137935385d
|
|
- These were displaying blank, apparently dpdk extended stat strings
must be within the heap so they are identified as vectors by
format_c_identifier even though they are not.
Type: fix
Change-Id: I2b153b100203b9856ce3af6d5ecb2daae410fb5b
Signed-off-by: Christian Hopps <chopps@labn.net>
|
|
Was seeing imissed counter become negative. Reuse the RX_ERROR code for all
three error counters to avoid the problem.
Type: fix
Change-Id: I99a69c8816326682745785ecd30e18a131ac2969
Signed-off-by: Christian Hopps <chopps@labn.net>
|
|
Type: fix
Signed-off-by: jiangxiaoming <jiangxiaoming@outlook.com>
Change-Id: I87c6f423ea8fdd9fb764693055eb1509f994d6f1
|
|
This is the code refactor for vnet/flow infra and the dpdk_plugin flow
implementation. The main works of the refactor are:
1. Added two base flow type: VNET_FLOW_TYPE_IP4 and VNET_FLOW_TYPE_IP6
as the base the flow type
2. All the other flows are derived from the base flow types
3. Removed some flow types that are not currently supported by
the hardware, and VPP won't leverage them either:
IP4_GTPU_IP4, IP4_GTPU_IP6, IP6_GTPC, IP6_GTPU,
IP6_GTPU_IP4, IP6_GTPU_IP6
4. Re-implemented the vnet/flow cli as well as the dpdk_plugin
implementation
5. refine cli prompt
6. refine display info in command "show flow entry"
Type: refactor
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
Change-Id: Ica5e61c5881adc73b28335fd83e36ec1cb420c96
|
|
When we have both format blacklisted devices like:
blacklist 1234:5678
blacklist 1234:56:78.0
unformat with fmt=%x:%x matches for both strings
and the rest 78.0 substring is kept in input
and it can't be parsed for init args
This patch checks first if device format matches PCI address and
just then if it matches Vendor and Product
Type: fix
Change-Id: If111762c0e0a424b052e4f6dc0f67731bf89dc2a
Signed-off-by: Vladimir Ratnikov <vratnikov@netgate.com>
|
|
CID 211153
Type: fix
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
Change-Id: Ic4d518d047c3ff36d9a7b72477c3efcb554d05bb
|
|
In case of vector, we must check length before trying to access element.
Also fix wrong DPDK plugin workaround.
Type: fix
Change-Id: I2ecef1c88ebef2362f48cab0d462699aa43cd4b9
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
This introduces a txq structure mirroring the rxq structure.
This fixes the case when #txq > #rxq, because lock must be per txq.
Type: fix
Fixes: dfb19cabe20ccf1cbd1aa714f493ccd322839b91
Change-Id: Ic1bce64d2b08b9a98c8242a1ba1bfcdbda322bec
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
This patch adds the IPSec ESP/AH type flow support
Have tested on E810 with Intel iAVF driver
Type: feature
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
Change-Id: I6ab8e69f67c423cc4e33f3c363881a97cdb98c30
|
|
Type: improvement
Change-Id: I3defde103ab245404de42d2be7abcb2c43d49a60
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Fix and optimize DMAC check in ethernet-input node to utilize NIC or
driver which support L3 DMAC-filtering mode so that DMAC check can be
bypassed safely for interfaces/sub-interfaces in L3 mode.
Checking of interface in L3-DMAC-filtering state to avoid DMAC check
require the following:
a) Fix interface driver init sequence for devices which supports L3
DMAC-filtering to indicate its capability and initialize interface
to L3 DMAC-filtering state.
b) Fix ethernet_set_flags() function and its associated callback
flags_change() functions registered by various drivers in interface
infra to provide proper L3 DMAC filtering status.
Maintain interface/sub-interface L3 config count so DMAC checks can be
bypassed if L3 forwarding is not setup on any main/sub-interfaces.
Type: fix
Ticket: VPP-1868
Signed-off-by: John Lo <loj@cisco.com>
Change-Id: I204d90459c13e9e486cfcba4e64e3d479bc9f2ae
|
|
Netvsc devices have the port type determined from their link speed.
The link speed between reboots of an Azure VM does not always end
up at the same value, so an interface that was FortyGigabitEthernet0
earlier may be FiftyGigabitEthernet0 now. That makes it difficult
to maintain a persistent store of configurations and apply those at
startup.
Change the port type to be VF so the name will always be generated
as VirtualFunctionEthernetX.
Type: improvement
Change-Id: I58cab852b87c0bcd9f73afe239803f38dab5c159
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
cxgbe PMD initializes its control channel as part of dev_configure(),
and trying to get link status prior to it will lead to a crash.
DPDK documentation loosely hints that we should not call any device
function before dev_start(), call link_state() only for the relevant
PMDs.
From DPDK API documentation:
The functions exported by the application Ethernet API to setup a device
designated by its port identifier must be invoked in the following
order:
rte_eth_dev_configure()
rte_eth_tx_queue_setup()
rte_eth_rx_queue_setup()
rte_eth_dev_start()
Then, the network application can invoke, in any order, the functions
exported by the Ethernet API to get the MAC address of a given device,
to get the speed and the status of a device physical link, to
receive/transmit [burst of] packets, and so on.
Type: fix
Change-Id: I12d2ab4d84e6bd72a9f695447e86f3222929c804
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
explicitly convert RSS function types from vnet_rss_function_t to
rte_eth_hash_function to avoid these two types go out of sync in the future...
Type: fix
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
Change-Id: Ic09f6bb7f2cfbcf7cc4d380e51554b7f2b7a3b90
|
|
This patch adds the l2tpv3oip type flow support
Have tested on E810 with Intel iAVF driver
Type: feature
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
Change-Id: Icb5114b5f70dd7a63f681e7c6ac802fade8b8cf1
|
|
Type: feature
Signed-off-by: Damjan Marion <damarion@cisco.com>
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Signed-off-by: Piotr Bronowski <piotrx.bronowski@intel.com>
Signed-off-by: Dariusz Kazimierski <dariuszx.kazimierski@intel.com>
Signed-off-by: Piotr Kleski <piotrx.kleski@intel.com>
Change-Id: I4c3fcccf55c36842b7b48aed260fef2802b5c54b
|
|
Type: improvement
Change-Id: Iebf77a63c0c19b130a3fbd26b5293304a9fed4c1
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I8c0eb5b5b12ffac1ff5dc89cab10bdb8e4be4322
|
|
This patch enables the RSS configuration through vnet/flow interface
With this RSS feature, users can config the RSS functions for specific flows
Currently, it supports:
default, toeplitz and symmetric_toeplitz rss function, and
ipv4-tcp/ipv4-udp/ipv6-tcp/ipv6-ucp flow types
Users can use the following options to combine with above flow
types for more specific hash input set selection:
l3-src-only, l3-dst-only, l4-src-only, l4-dst-only
Command line:
test flow add dst-ip any proto udp rss function default rss types ipv4-tcp use l3-dst-only
test flow add dst-ip any proto udp rss function toeplitz rss types ipv4-udp use l4-src-only
test flow add dst-ip any proto udp rss function symmetric_toeplitz rss types ipv6-udp use l3-src-only and l3-dst-only
Type: feature
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
Change-Id: I213efc76dc8af37f2f63605884f353e05b0f5d2a
|
|
i2c follows its only use case - the original 82599 driver - into
extras/deprecated.
cj is/was an emergency debug tool unused in several years. Move to
extras/deprecated/vlib
Type: refactor
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: Ib55b65373f62630db295c562974bd8f2456c3107
|
|
Type: fix
Ticket: VPP-1837
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I9ec87d2293d8f92c3e488a0f61083cf815ac496c
|
|
Type: fix
Change-Id: I3c7ebbe91e7dffe9fd6851e5334fe920f2187cf0
Signed-off-by: Amir Zeidner <amirzei@mellanox.com>
|
|
DPDK recently added a check in the virtio driver to make sure that
rxmode->mq_mode == ETH_MQ_RX_NONE. We were passing ETH_MQ_RX_RSS
and the device initialization was not accepted.
The reason for the change in DPDK was that there is no controls
(algorithm, redirection table, hash function). So they thought ETH_MQ_RX_NONE
was the best choice for the value of mq_mode.
Type: fix
Ticket: VPP-1853
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: Ifa0fc4206cedc56a851f94f6434a2a7500bbd419
|