Age | Commit message (Collapse) | Author | Files | Lines |
|
DPDK API forbids calling rte_eth_xstats_get on a port
which has not been setup up yet.
Citing the DPDK docs (reformated):
"
The functions exported by the application Ethernet API to setup a device
designated by its port identifier must be invoked in the following order:
rte_eth_dev_configure()
rte_eth_tx_queue_setup()
rte_eth_rx_queue_setup()
rte_eth_dev_start()
Then, the network application can invoke, in any order, the functions
exported by the Ethernet API to get the MAC address of a given device,
to get the speed and the status of a device physical link, to
receive/transmit [burst of] packets, and so on.
"
original can be found here:
http://dpdk.org/doc/api/rte__ethdev_8h.html#a36ba70a5a6fce2c2c1f774828ba78f8d
Change-Id: I91854b8b0dd12dd028b4b36665cca49f16eac24c
Signed-off-by: Szymon Sliwa <szs@semihalf.com>
|
|
Packet trace initiated by dpdk-input node would occasionally
not fully function if next node is ip4-input.
Change packet trace saving order in the quad-loop so "sho trace"
will display trace in packet receive order.
Fold calling of vlib_trace_buffer() into dpdk_add_trace().
Change-Id: I9d7a9bf3b9391f95590e66150b26b0b15912d803
Signed-off-by: John Lo <loj@cisco.com>
|
|
Linux kernel and DPDK recognize the following Ethernet speeds:
10M, 100M, 1G, 2.5G, 5G, 10G, 20G, 25G, 40G, 50G, 56G and 100G.
Add consistent Ethernet speeds to VPP.
Change-Id: I4cfcf378fb34425c1206db5aa2f6bdcc66e0a6ab
Signed-off-by: Lee Roberts <lee.roberts@hpe.com>
|
|
Change-Id: I806cbf8c6c49643fe6c317bcceab93c1b9d441ab
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I99cf3e7cc991aa7d32385a155c707a6516516117
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I1d3ede2b043e1fd4abc54f540bb1d3ac9863016e
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
The expression to determine whether to delete a session
from the disposal list only evaluates true if some,
but not all, of the sessions in the list were freed.
When all sessions in the list are freed, it evaluates
false and the sessions are left in the list to be freed
again later, which can result in a session pool element
that was reallocated to a different SA being freed,
breaking crypto for the newer SA.
Add an 'else' that handles the case where all sessions
were freed.
Change-Id: I3ae54d5b3bfc3658bf406caa50646924baaae589
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
When using a DPDK cryptodev with IPsec, deleting a
session often results in a SEGV. A bad pointer
is being passed to rte_cryptodev_sym_session_free().
Put the correct value on the crypto disposal list and
add a check to determine whether the call to free the
session is going to result in a crash before doing
it.
Change-Id: I8a6b0a594585ebcfa56b555ede7ef7d67e5e2b33
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
ENA doesn't support scatter-gather. The PMD started
failing rte_eth_dev_rx_queue_config() in DPDK 18.02
if the flag to enable it is set. Turn the flag off in
dpdk_lib_init().
Change-Id: Ifdd9f188c89b46efe82412c75fb935a92436da1c
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Problem: rte_eth_dev_set_mtu() returns with failure from ThunderX NICVF
DPDK PMD driver which supports MTU less than ETHERNET_MAX_PACKET_BYTES.
rte_eth_dev_set_mtu() being called twice from dpdk_lib_init(): one via
dpdk_device_setup() and second in dpdk_lib_init() itself. Currently
dpdk_lib_init() passes vnet_hardware_interface->max_packet_bytes as an
argument to rte_eth_dev_set_mtu() without consulting dev_info.max_rx_pktlen.
NICs like i4oe, ixgbe can support MTU much greater than 9216 hence its not
a problem for those NICS.
Fix: This patch calculates dpdk_device->port_conf.rxmode.max_rx_pkt_len,
vnet_hardware_interface->max_packet_bytes and MTU by consulting
dev_info.max_rx_pktlen.
Change-Id: If04bbfae49ee971dac0063ff1835e4a9c3087865
Signed-off-by: Nitin Saxena <nitin.saxena@cavium.com>
|
|
17.11 is still default.
Change-Id: I524d232579db8a59c717c5d760398b6b7f811d03
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: Icd2184dec16d30cdcc689ca37c834b5df2f0a1a3
Signed-off-by: Eyal Bari <ebari@cisco.com>
|
|
Change-Id: I853386aebfe488ebb10328435b81b6e3403c5dd0
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I7110436626352d45ffe0ca71fb88dea2c77ab639
Signed-off-by: Eyal Bari <ebari@cisco.com>
|
|
This is a version of the VPP API generator in Python PLY. It supports
the existing language, and has a plugin architecture for generators.
Currently C and JSON are supported.
Changes:
- vl_api_version to option version = "major.minor.patch"
- enum support
- Added error checking and reporting
- import support (removed the C pre-processor)
- services (tying request/reply together)
Version:
option version = "1.0.0";
Enum:
enum colours {
RED,
BLUE = 50,
};
define foo {
vl_api_colours_t colours;
};
Services:
service {
rpc foo returns foo_reply;
rpc foo_dump returns stream foo_details;
rpc want_stats returns want_stats_reply
events ip4_counters, ip6_counters;
};
Future planned features:
- unions
- bool, text
- array support (including length)
- proto3 output plugin
- Refactor C/C++ generator as a plugin
- Refactor Java generator as a plugin
Change-Id: Ifa289966c790e1b1a8e2938a91e69331e3a58bdf
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Change-Id: I6eef2ca258ff5b4aa9b21b98543d814633e295af
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
|
|
On rx, the ENA PMD sets tx offload flags based on the
received packet's l4 protocol. This means you need
to turn off those offloads for every packet if you
encapsulate packets arriving on an interface using
that PMD. Disable this behavior.
Change-Id: Icae9f32e3d292d767da440ae5c1280902bdaa083
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Change-Id: I1699e440052faa317b06d46692e8656a41d21bfe
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: Ib4012ff598698924484525932d041988cc4c63f6
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Elastic Network Adapter PMD for newer AWS instance types
Change-Id: Ic7f6ac4a261ccc7af3ffb2ed8950274532e3feae
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Also fixes old ixge driver, so it works with recent physmem changes and
vfio.
Change-Id: Id4be74b34daed47cd281a77eec43d6692340d882
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
- fix ESP transport mode
- safely free crypto sessions
- use rte_mempool_virt2phy/rte_mempool_virt2iova
- align DPDK QAT capabilities for IPsec usage (DPDK 17.08)
- reserve 16B for aad (reference cryptodev doc)
Change-Id: I3822a7456fb5a255c767f5a44a429f91a140fe64
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
|
|
unify code from both branches
Change-Id: Iae7325cff8c799c7827727ad7465bec089e39f50
Signed-off-by: Eyal Bari <ebari@cisco.com>
|
|
Change-Id: I31d2cbb02a0f59603ef1adc0d185e3d775dfda2f
Signed-off-by: Eyal Bari <ebari@cisco.com>
|
|
dpdk_rx_next_from_packet_start is equivalent to dpdk_rx_next_from_etype and seems to have no side effects
Change-Id: I629dadfbfb35ad1f5c7198e7824883ae4bd6abaa
Signed-off-by: Eyal Bari <ebari@cisco.com>
|
|
Change-Id: Ic43c70bfe3e93cb3e6cfab7cda1986e44e371c06
Signed-off-by: Eyal Bari <ebari@cisco.com>
|
|
Add legacy and modern macros to pci_config header.
This follows dpdk commit: 4c7903658f6b5a8f4901224ef405445541b91e4a
And PCI Device Conformance doc :
docs.oasis-open.org/virtio/virtio/v1.0/cs02/virtio-v1.0-cs02.html#x1-640001
Change-Id: Iacd40ea8c06f220736ca0bc7ce68bcf1e55b68f6
Signed-off-by: Gabriel Ganne <gabriel.ganne@enea.com>
|
|
Change-Id: I3713b4c460a3cd414b560e16aac054aee2e1181b
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I53f917cd58101a14667641ee9cecd1eabf3f71d9
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Currently, every alloc involves callback function call. With this change
callback function is called only if there is no empty buffers on the
free list.
Change-Id: I2238c19ece7ce182c49ba0f2485add52f335f3b6
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
New startup.conf knob:
dpdk { ... no-tx-checksum-offload ... }
Change-Id: I337fd57616dd77687300861b411b420a3cb75149
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: Iaae69a1219ccaedbfee5c3075c41c7b31c6e2b70
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I4ae65494b8f9bc51521add5e66a51b594aad6716
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Original code was not thread safe.
Change-Id: I3d473b976d2b9ff62f42955c5c2a7fd6b4990cc2
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I0a6d1257e391c3b6f7da6498bd5f7d4c545d17e9
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Also remove DPDK 17.05 support.
Change-Id: I4f96cb3f002cd90b12d800d6904f2364d7c4e270
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I02b2b69db1e2afe62e3d3413034feb3bdcb3123e
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: Ic4f797cea6fa21fb29d646256210357cf5267b38
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
|
|
Change-Id: I74ff693315a3ffc7aa2640f25d906ca0d6da6bc5
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: If581feca0d51d0420c971801aecdf9250c671b36
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
This reverts commit 45a588fa3efaaf52360986360ab1f6827bae3164.
Change-Id: I7e541545791f7743ee827bdec8b6fc46cbb0938f
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I2feb3e07c3070e8a525c539dd2feffa0dd1bca21
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
|
|
VPP-1034
Change-Id: I02b4db9e52446ab8578df1f011dd27f39de64c70
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
|
|
Change-Id: Icaf7d7ad47284aea7a56e8006b69f45874d64202
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
- Global variables declared in header files without
the use of the 'extern' keword will result in multiple
instances of the variable to be created by the compiler
-- one for each different source file in which the
the header file is included. This results in wasted
memory allocated in the BSS segments as well as
potentially introducing bugs in the application.
Change-Id: I6ef1790b60a0bd9dd3994f8510723decf258b0cc
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
|
|
Ubuntu 17.04, gcc version 6.3.0 20170406 (Ubuntu 6.3.0-12ubuntu2),
"make build" fails with the few of the errors below:
error: suggest parentheses around comparison in operand of ‘|’
[-Werror=parentheses]
is_aead = (sa0->crypto_alg == IPSEC_CRYPTO_ALG_AES_GCM_128 |
Solution: use the logical rather than the bitwise or.
Change-Id: Iffcc1ed2e68b14b248159cb117593d32c623c553
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
This follows commit d3c008d108aa2187d1a2afe2833b4de25ca2c2ab by
Christophe Fontaine.
Change-Id: I0c4df40df44be2ac0ab25817fa050a1f619eca4d
Signed-off-by: Gabriel Ganne <gabriel.ganne@enea.com>
|
|
Made Update to src/plugins/dpdk/buffer.c
Change-Id: I87bb8f38974a7be274c1b1d205f5513e7d068e48
Signed-off-by: Georgina <georgina.sheehan@intel.com>
|
|
Change-Id: Ica3bc74ffbb1c0df4e198b0abff8df10cdeb2182
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
|
|
Change-Id: I5b48310c46ca8a2143b2132110240d7e9a52c25d
Signed-off-by: Damjan Marion <damarion@cisco.com>
|