summaryrefslogtreecommitdiffstats
path: root/src/plugins/dpdk
AgeCommit message (Collapse)AuthorFilesLines
2018-10-23c11 safe string handling supportDave Barach7-19/+19
Change-Id: Ied34720ca5a6e6e717eea4e86003e854031b6eab Signed-off-by: Dave Barach <dave@barachs.net>
2018-10-22vlib: pci improvementsDamjan Marion1-2/+3
- logging - pass vlib_main_t to all APIs - open vfio container only when needed Change-Id: I897e53e0af3f91c3a99f0c827401d1c0ec2e478a Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-10-22ipsec fix missing node renamesKlement Sekera3-7/+11
Change-Id: I70bc5af646894811d373456ec66aa83f2d75a477 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2018-10-22vppinfra: use log2 page size in hugepage functionsDamjan Marion1-1/+1
Change-Id: Ibec32c6df32f4cd9889d378e244f170c93ad295b Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-10-22Fix dereferencing null string in dpdk_early_initJuraj Sloboda1-0/+1
Change-Id: Iffba7ebe5af8fadc0251f3a10022739d45f394ce Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
2018-10-22ipsec: split ipsec nodes into ip4/ip6 nodesKlement Sekera3-71/+254
Change-Id: Ic6b27659f1fe9e8df39e80a0441305e4e952195a Signed-off-by: Klement Sekera <ksekera@cisco.com>
2018-10-22dpdk: use rte_vfio_dma_map API instead of digging for vfio fdDamjan Marion1-63/+17
This is new API introduced in DPDK 18.08. Change-Id: I66d49fe54a6abf2af621b597e8d4535e29cecec4 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-10-20dpdk: add netvsc PMDStephen Hemminger3-1/+40
Teach DPDK plugin about the netvsc Poll Mode Driver. The speed of the Netvsc device matches the speed of the external port on the underlying vswitch. Therefore 1G, 10G, 25G, 56G and even 100G are possible. Change-Id: I14ab6907b7d8d350b63a083409d45fb9c348a364 Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
2018-10-20dpdk: use rx/tx_offload_names to formatStephen Hemminger1-38/+53
Rather than keeping our own list of offload capabalities, use the function in 18.08 or later to decode the value. Also, introduce a formatter to convert to lower case because DPDK API returns upper case names. Change-Id: I87546fa2bec67f8a8b44288f5994514114cb6faf Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
2018-10-19vppinfra: add atomic macros for __sync builtinsSirshak Das1-2/+2
This is first part of addition of atomic macros with only macros for __sync builtins. - Based on earlier patch by Damjan (https://gerrit.fd.io/r/#/c/10729/) Additionally - clib_atomic_release macro added and used in the absence of any memory barrier. - clib_atomic_bool_cmp_and_swap added Change-Id: Ie4e48c1e184a652018d1d0d87c4be80ddd180a3b Original-patch-by: Damjan Marion <damarion@cisco.com> Signed-off-by: Sirshak Das <sirshak.das@arm.com> Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com> Reviewed-by: Ola Liljedahl <ola.liljedahl@arm.com> Reviewed-by: Steve Capper <steve.capper@arm.com>
2018-10-16Fix coverity issue for potentially overflowing of page sizeHaiyang Tan1-3/+3
Change-Id: I2779626d745badb63386efcf729da7a094a4f297 Signed-off-by: Haiyang Tan <haiyangtan@tencent.com>
2018-10-15dpdk: only look at PCI information on PCI devicesStephen Hemminger5-8/+26
The rte_device is use as a base type of all DPDK devices. It is not valid to use container_of to find PCI information unless the bus of the rte_device is pci. Otherwise, the pointer is looking at some other data, which may or may not be zero. This change introduces a helper function to get rte_pci_device pointer. If device is on PCI bus it returns pointer to rte_pci_device info, otherwise it returns NULL. Change-Id: Ia7446006bb93a7a54844969f3b3dd3b918890dfd Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
2018-10-12dpdk: support passing log-levelStephen Hemminger1-1/+2
Since DPDK 17.05, DPDK logging supports per subsystem dynamic logging. Allow passing this as log-level on EAL command line. dpdk { log-level pmd.net.virtio.*:debug ... } Change-Id: If9576c11aba390a5cd2740fc1c9da5768689bd74 Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
2018-10-10vppinfra: introduce clib_mem_vm_ext_free() to avoid fd leaksHaiyang Tan1-1/+1
Change-Id: I8691a10493d159a97574550c111f07722960a7cd Signed-off-by: Haiyang Tan <haiyangtan@tencent.com>
2018-10-01thread: Add show threads apiMohsin Kazmi2-2/+2
Change-Id: I3124238ab4d43bcef5590bad33a4ff0b5d8b7d15 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2018-09-27dpdk_plugin: fix mlx5 build and runtime issuesSirshak Das1-2/+10
There are issues with VPP finding and linking the mlx5 shared glue library which was built by default if mlx5 was enabled. Runtime Errors this patch fixes: net_mlx5: cannot load glue library: librte_pmd_mlx5_glue.so.18.05.0: cannot open shared object file: No such file or directory net_mlx5: cannot initialize PMD due to missing run-time dependency on rdma-core libraries (libibverbs, libmlx5) This patch introduces additional config parameter to disable glue library building and instead statically link ibverbs and mlx5 libraries to the PMD and dpdk_plugin. Change-Id: I0b2f67652a57854c778e991780903fb15706ace8 Signed-off-by: Sirshak Das <sirshak.das@arm.com> Reviewed-by: Lijian Zhang <Lijian.Zhang@arm.com>
2018-09-26dpdk: fix QSFP+ module infoDamjan Marion1-1/+2
Change-Id: I89c7df778e66a5d2147190dc99445405d81964e5 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-09-25dpdk: show pluggable info in 'show hardware'Damjan Marion1-0/+28
module: id SFP/SFP+/SFP28, compatibility: 40g_active_cable vendor: Amphenol, part NDCCGF-I202 revision: C, serial: APF1711202351C, date code: 170318 cable length: 2m Change-Id: Ife35607b4f078f7b56737fe066ad4cbd247a7504 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-09-24Trivial: Clean up some typos.Paul Vinciguerra8-21/+21
Change-Id: I085615fde1f966490f30ed5d32017b8b088cfd59 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2018-09-19dpdk: mask and warn if rx/tx offload is not availableDamjan Marion4-94/+115
Warning messsage is displayed in system log: vpp# show log 1970/ 1/ 1 01:00:01:198 warn dpdk unsupported rx offloads requested on port 0: scatter Change-Id: I40021066daf2d37ca5233e3adce55e412f0d3932 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-09-18disable scatter/gather for ENA with DPDK 18.08Matthew Smith1-1/+5
The scatter/gather rxmode flag was set for ENA when building against DPDK >= 18.08. ENA does not support this, so disable it. It looks like enabling it was a copy/paste error. Also, after offloads are adjusted based on whether "no-multi-seg" is set, those configurations are overwritten by copying port_conf_template over the port config. That should only happen for versions of DPDK older than 18.08 because 18.08 and newer make changes directly on the port config instead of making changes to the template. Make the clib_memcpy() conditional on the DPDK version being less than 18.08. After doing so, compiler errors complain about port_conf_template being declared but not used, so make it's declaration conditional. Change-Id: If81980d71c379a565b51dd700b953f8c811a8703 Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2018-09-14dpdk: add detection of mellanox PMDsDamjan Marion1-0/+10
Change-Id: I523fc489f5e73ba726ab0711eab3fdde53dc35e8 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-09-12Always use 'lib' instead of 'lib64'Damjan Marion1-3/+2
It is packaging responsibility to put libs in the right place. Use of lib64 resulted in huge amount of files with hardcoded lib64. This patch simplifies things... Change-Id: Iab0dea0583e480907732c5d2379eb951a00fa9e6 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-09-12device flags will set in dpdk_update_link_state.Khers1-2/+0
Change-Id: If74acb0168bed2201d2a8b47bf3f860540d1574b Signed-off-by: Khers <s3m2e1.6star@gmail.com>
2018-09-10dpdk: clean interface link information on admin down / stopDamjan Marion1-0/+1
Change-Id: Ie68814c8afc6cd67eb75da0b95dffa7b404cb7ba Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-09-10dpdk-plugin: do not request SCTP offload, some cards do not support it while ↵Andrew Yourtchenko1-2/+2
supporting TCP/UDP The DPDK plugin sets all of the offload flags, which may cause an initialization failure on the NICs that do not support SCTP offload. The VPP code does not deal with the SCTP offload at the moment at all, so after discussing with Damjan, we agreed the best approach to fix the issue is to not request the SCTP offload. The output of "show hardware" for the NIC in question before this patch: Name Idx Link Hardware GigabitEthernet1/0/0 1 down GigabitEthernet1/0/0 Ethernet address 00:e0:67:09:90:4b Intel 82540EM (e1000) carrier down flags: pmd pmd-init-fail maybe-multiseg tx-offload intel-phdr-cksum rx queues 1, rx desc 1024, tx queues 1, tx desc 1024 cpu socket 0 Errors: rte_eth_dev_configure[port:0, errno:-22]: Unknown error -22 And the excerpt from "show log": 1970/ 1/ 1 00:00:00:739 notice dpdk Ethdev port_id=0 requested Tx offloads 0x1c doesn't match Tx offloads capabilities 0xf in rte_eth_dev_configure() Change-Id: I159d65c02fc3f044441972205f1f0ac08e52050c Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2018-09-08L2 BVI/FIB: Update L2 FIB table when BVI's MAC changesNeale Ranns1-1/+2
also some moving of l2 headers to reduce dependencies Change-Id: I7a700a411a91451ef13fd65f9c90de2432b793bb Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-09-04Fixed showing negative count in stats show CLINaoyuki Mori1-2/+2
Some counters (bytes, pkts) are formatted as signed instead of unsigned in "show hardware-interfaces" and "show lb". These stats counters are declared as u64. Change-Id: Id1b588188bff4e36402beb8d07f779e9a5193956 Signed-off-by: Naoyuki Mori <naoyuki.mori@intel.com>
2018-09-03Deprecate old buffer replication schemeDamjan Marion4-137/+3
Change-Id: I1f54b994425c58776e1445c8d9fe142e7a644d3d Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-08-30cmake: a bit of packaging workDamjan Marion1-0/+3
Change-Id: I40332c2348c4aab873d726532f2ac3c4abde7ec9 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-08-27cmake: Fix plugins .h includesMohsin Kazmi1-0/+5
Change-Id: I90600d000afb02e8969f3c01bcf9e4b5c10a7d39 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2018-08-27cmake: add missing vat pluginsDamjan Marion1-0/+3
Change-Id: Ib61f0299c17c0f021408ab0a44c5b54f55f8a8ec Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-08-25cmake: improve add_vpp_plugin macroDamjan Marion1-15/+19
Change-Id: Iffd5c45ab242a919592a1f686f7f880936b68a1a Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-08-21VPP-1268: Add option for memory channels DPDK usesJessica Tallon1-0/+2
This adds a `num-mem-channels` option for DPDK enabling support for choosing the number of memory channels used. Change-Id: I1663dd866ac60592b6dd02261af66d87c64acdb1 Signed-off-by: Jessica Tallon <tsyesika@igalia.com>
2018-08-18cmake: highlight warning and error messagesDamjan Marion1-3/+3
Change-Id: Id4b73368382b5e78c138987fe092429af5cb0afd Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-08-18cmake: DPDK rte_config.h parsingDamjan Marion1-12/+36
Change-Id: I53cad8e7787a132a5d6bacd5fda3fe67b7d59b44 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-08-17CMake as an alternative to autotools (experimental)Damjan Marion1-0/+100
Change-Id: Ibc59323e849810531dd0963e85493efad3b86857 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-08-16dpdk: fix rss hash function handlingDamjan Marion3-6/+23
DPDK 18.08 verifies if all set bits are supported and fails if not.... Change-Id: Ia87242fcda11147dff3bebe2e2bef32f0a8891fb Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-08-13Multiarch handling in different constructor macrosDamjan Marion4-18/+5
This significantly reduces need for ... in multiarch code. Simply constructor macros will jost create static unused entry if CLIB_MARCH_VARIANT is defined and that will be optimized out by compiler. Change-Id: I17d1c4ac0c903adcfadaa4a07de1b854c7ab14ac Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-08-13dpdk: support for DPDK 18.08Damjan Marion5-66/+75
Change-Id: If1b93341c222160b9a08f127620c024620e55c37 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-08-11Multiversioning: Device (tx) function constructorMohsin Kazmi1-17/+3
Change-Id: I39f87ca161c891fb22462a23188982fef7c3243f Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2018-08-06dpdk-flow:fix raw item initEyal Bari1-1/+3
dpdk raw item match string changed from flexible array member to a pointer member Change-Id: I930f05112ce04b0cdb3feb985d755e730b102084 Signed-off-by: Eyal Bari <ebari@cisco.com>
2018-07-26Clean up dpdk plugin rx/tx pcap tracingDave Barach2-32/+26
Needed a spinlock to protect the data vector. Cleaned up debug cli so the output makes sense, and so that various parameters exist in one place. Removed a nonsense memset-to-zero which led to ultra-confusing results. Change-Id: I91cd14ce7fe84fd2eceab86e016b5ee001993be4 Signed-off-by: Dave Barach <dbarach@cisco.com>
2018-07-23fix vector index range checksEyal Bari1-1/+1
Change-Id: I63c36644c9d93f2c3ec6606ca0205b407499de4e Signed-off-by: Eyal Bari <ebari@cisco.com>
2018-07-19dpdk: fix Mellanox Connect-X3 VF IDMatthew Smith1-1/+1
Fix a typo from previous patch. Change 0x104 to 0x1004. Change-Id: I82230a8a0ec01567eb1d4bc12ac02062c2a98347 Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2018-07-19dpdk: set log write fd to non-blockingMatthew Smith1-7/+15
If a PMD writes too many log messages using rte_vlog(), the pipe for logging can fill and then rte_vlog() will block on fflush() while it waits for something to read from the other side of the pipe. That will never happen since the process node that would read the other side of the pipe runs in the same thread. Set the write fd to non-blocking before the call to rte_openlog_stream(). If the pipe is full, calls to write() or fflush() will fail but execution will continue. Change-Id: I0e5d710629633acda5617ff29897d6582c255d57 Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2018-07-19dpdk: add device IDs for Mellanox ConnectX-3Matthew Smith1-1/+6
Recognize the PF and VF device IDs for the Mellanox adapter used on Azure. Change-Id: Ic7b36b37ac93db2b696354ffe6fa2b6d62ee3801 Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2018-07-18DPDK: coverity scan warningsMarco Varlese2-7/+4
This patch addresses the coverity scan warnings reported for the DPDK plugin. Change-Id: Ie7ac7ffcf4a6c63245eae0f9910a193ab1e318a8 Signed-off-by: Marco Varlese <marco.varlese@suse.de>
2018-07-18Add config option to use dlmalloc instead of mheapDave Barach1-2/+2
Configure w/ --enable-dlmalloc, see .../build-data/platforms/vpp.mk src/vppinfra/dlmalloc.[ch] are slightly modified versions of the well-known Doug Lea malloc. Main advantage: dlmalloc mspaces have no inherent size limit. Change-Id: I19b3f43f3c65bcfb82c1a265a97922d01912446e Signed-off-by: Dave Barach <dave@barachs.net>
2018-07-13Add QEDE poll mode driver (librte_pmd_qede)Igor Mikhailov (imichail)3-4/+10
The driver implements Cavium QLogic FastLinQ QL4xxxx 10G/25G/40G/50G/100G Intelligent Ethernet Adapters (IEA) and Converged Network Adapters (CNA) (doc/guides/nics/qede.rst) Change-Id: If17e8cb572eb8c0585085be1c7cfdfa159eb6e68 Signed-off-by: Igor Mikhailov (imichail) <imichail@cisco.com>