summaryrefslogtreecommitdiffstats
path: root/src/plugins/dpdk
AgeCommit message (Collapse)AuthorFilesLines
2018-02-26vnet: add 25G interface speed flagDamjan Marion1-0/+6
Change-Id: I1d3ede2b043e1fd4abc54f540bb1d3ac9863016e Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-02-25Fix bug in dpdk_crypto_session_disposal()Matthew Smith1-0/+2
The expression to determine whether to delete a session from the disposal list only evaluates true if some, but not all, of the sessions in the list were freed. When all sessions in the list are freed, it evaluates false and the sessions are left in the list to be freed again later, which can result in a session pool element that was reallocated to a different SA being freed, breaking crypto for the newer SA. Add an 'else' that handles the case where all sessions were freed. Change-Id: I3ae54d5b3bfc3658bf406caa50646924baaae589 Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2018-02-24Fix crypto session deletion crashMatthew Smith1-6/+9
When using a DPDK cryptodev with IPsec, deleting a session often results in a SEGV. A bad pointer is being passed to rte_cryptodev_sym_session_free(). Put the correct value on the crypto disposal list and add a check to determine whether the call to free the session is going to result in a crash before doing it. Change-Id: I8a6b0a594585ebcfa56b555ede7ef7d67e5e2b33 Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2018-02-23Disable scatter-gather for ENAMatthew Smith1-0/+1
ENA doesn't support scatter-gather. The PMD started failing rte_eth_dev_rx_queue_config() in DPDK 18.02 if the flag to enable it is set. Turn the flag off in dpdk_lib_init(). Change-Id: Ifdd9f188c89b46efe82412c75fb935a92436da1c Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2018-02-19dpdk: Fix MTU calc for NICs that support mtu<9216Nitin Saxena1-34/+66
Problem: rte_eth_dev_set_mtu() returns with failure from ThunderX NICVF DPDK PMD driver which supports MTU less than ETHERNET_MAX_PACKET_BYTES. rte_eth_dev_set_mtu() being called twice from dpdk_lib_init(): one via dpdk_device_setup() and second in dpdk_lib_init() itself. Currently dpdk_lib_init() passes vnet_hardware_interface->max_packet_bytes as an argument to rte_eth_dev_set_mtu() without consulting dev_info.max_rx_pktlen. NICs like i4oe, ixgbe can support MTU much greater than 9216 hence its not a problem for those NICS. Fix: This patch calculates dpdk_device->port_conf.rxmode.max_rx_pkt_len, vnet_hardware_interface->max_packet_bytes and MTU by consulting dev_info.max_rx_pktlen. Change-Id: If04bbfae49ee971dac0063ff1835e4a9c3087865 Signed-off-by: Nitin Saxena <nitin.saxena@cavium.com>
2018-02-15dpdk: add support for DPDK 18.02, deprecate 17.08Damjan Marion4-24/+0
17.11 is still default. Change-Id: I524d232579db8a59c717c5d760398b6b7f811d03 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-02-12dpdk:fix trace to follow feature arcEyal Bari3-87/+66
Change-Id: Icd2184dec16d30cdcc689ca37c834b5df2f0a1a3 Signed-off-by: Eyal Bari <ebari@cisco.com>
2018-02-07Refactor vlib_buffer flagsDamjan Marion3-16/+6
Change-Id: I853386aebfe488ebb10328435b81b6e3403c5dd0 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-02-01dpdk:fix typo in prefetch sequenceEyal Bari1-2/+2
Change-Id: I7110436626352d45ffe0ca71fb88dea2c77ab639 Signed-off-by: Eyal Bari <ebari@cisco.com>
2018-01-23VPPAPIGEN: vppapigen replacement in Python PLY.Ole Troan1-1/+1
This is a version of the VPP API generator in Python PLY. It supports the existing language, and has a plugin architecture for generators. Currently C and JSON are supported. Changes: - vl_api_version to option version = "major.minor.patch" - enum support - Added error checking and reporting - import support (removed the C pre-processor) - services (tying request/reply together) Version: option version = "1.0.0"; Enum: enum colours { RED, BLUE = 50, }; define foo { vl_api_colours_t colours; }; Services: service { rpc foo returns foo_reply; rpc foo_dump returns stream foo_details; rpc want_stats returns want_stats_reply events ip4_counters, ip6_counters; }; Future planned features: - unions - bool, text - array support (including length) - proto3 output plugin - Refactor C/C++ generator as a plugin - Refactor Java generator as a plugin Change-Id: Ifa289966c790e1b1a8e2938a91e69331e3a58bdf Signed-off-by: Ole Troan <ot@cisco.com>
2018-01-18VPP-1122 dpdk/ipsec: fix transport mode pkt lenRadu Nicolau1-3/+7
Change-Id: I6eef2ca258ff5b4aa9b21b98543d814633e295af Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
2018-01-09Patch ENA PMD to skip setting tx flags in rx pathMatthew Smith1-1/+1
On rx, the ENA PMD sets tx offload flags based on the received packet's l4 protocol. This means you need to turn off those offloads for every packet if you encapsulate packets arriving on an interface using that PMD. Disable this behavior. Change-Id: Icae9f32e3d292d767da440ae5c1280902bdaa083 Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2017-12-16dpdk: unset ETH_TXQ_FLAGS_NOXSUMS only for selected PMDsDamjan Marion1-5/+8
Change-Id: I1699e440052faa317b06d46692e8656a41d21bfe Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-12-14pci: auto-detect right vfio/uio driverDamjan Marion1-1/+1
Change-Id: Ib4012ff598698924484525932d041988cc4c63f6 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-12-14Enable AWS ENA PMDMatthew Smith3-1/+13
Elastic Network Adapter PMD for newer AWS instance types Change-Id: Ic7f6ac4a261ccc7af3ffb2ed8950274532e3feae Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2017-12-09vlib: PCI rework to support VFIODamjan Marion1-9/+23
Also fixes old ixge driver, so it works with recent physmem changes and vfio. Change-Id: Id4be74b34daed47cd281a77eec43d6692340d882 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-12-05dpdk/ipsec: multiple fixesSergio Gonzalez Monroy5-105/+126
- fix ESP transport mode - safely free crypto sessions - use rte_mempool_virt2phy/rte_mempool_virt2iova - align DPDK QAT capabilities for IPsec usage (DPDK 17.08) - reserve 16B for aad (reference cryptodev doc) Change-Id: I3822a7456fb5a255c767f5a44a429f91a140fe64 Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
2017-12-05dpdk:remove duplicate codeEyal Bari1-11/+8
unify code from both branches Change-Id: Iae7325cff8c799c7827727ad7465bec089e39f50 Signed-off-by: Eyal Bari <ebari@cisco.com>
2017-12-04dpdk: remove unused "use_rss" flagEyal Bari2-7/+0
Change-Id: I31d2cbb02a0f59603ef1adc0d185e3d775dfda2f Signed-off-by: Eyal Bari <ebari@cisco.com>
2017-12-04dpdk: remove duplicate functionEyal Bari1-32/+1
dpdk_rx_next_from_packet_start is equivalent to dpdk_rx_next_from_etype and seems to have no side effects Change-Id: I629dadfbfb35ad1f5c7198e7824883ae4bd6abaa Signed-off-by: Eyal Bari <ebari@cisco.com>
2017-12-04dpdk: remove unused cached eth input nodeEyal Bari2-10/+0
Change-Id: Ic43c70bfe3e93cb3e6cfab7cda1986e44e371c06 Signed-off-by: Eyal Bari <ebari@cisco.com>
2017-11-28net/virtio: support modern device idGabriel Ganne1-1/+3
Add legacy and modern macros to pci_config header. This follows dpdk commit: 4c7903658f6b5a8f4901224ef405445541b91e4a And PCI Device Conformance doc : docs.oasis-open.org/virtio/virtio/v1.0/cs02/virtio-v1.0-cs02.html#x1-640001 Change-Id: Iacd40ea8c06f220736ca0bc7ce68bcf1e55b68f6 Signed-off-by: Gabriel Ganne <gabriel.ganne@enea.com>
2017-11-27dpdk: fix issue when tx offload stops working after MTU changeDamjan Marion2-19/+4
Change-Id: I3713b4c460a3cd414b560e16aac054aee2e1181b Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-11-27dpdk: fix trajectory compilationFlorin Coras1-1/+1
Change-Id: I53f917cd58101a14667641ee9cecd1eabf3f71d9 Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-11-27vlib: make vlib_buffer_alloc inline functionDamjan Marion1-73/+11
Currently, every alloc involves callback function call. With this change callback function is called only if there is no empty buffers on the free list. Change-Id: I2238c19ece7ce182c49ba0f2485add52f335f3b6 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-11-24dpdk: enable tx checksum offloads as default, add disable knobDamjan Marion2-2/+11
New startup.conf knob: dpdk { ... no-tx-checksum-offload ... } Change-Id: I337fd57616dd77687300861b411b420a3cb75149 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-11-24dpdk: avoid false sharing of dpdk_buffer_per_thread_dataDamjan Marion1-0/+1
Change-Id: Iaae69a1219ccaedbfee5c3075c41c7b31c6e2b70 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-11-23dpdk: prefetch both cachelines during buffer freeDamjan Marion1-1/+1
Change-Id: I4ae65494b8f9bc51521add5e66a51b594aad6716 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-11-22dpdk: fix potential crash in buffer free functionDamjan Marion1-18/+49
Original code was not thread safe. Change-Id: I3d473b976d2b9ff62f42955c5c2a7fd6b4990cc2 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-11-21dpdk: add l2_hdr_offset and l3_hdr_offset in vlib_buffer_tDamjan Marion3-60/+60
Change-Id: I0a6d1257e391c3b6f7da6498bd5f7d4c545d17e9 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-11-20dpdk: add support for DPDK 17.11Damjan Marion10-174/+45
Also remove DPDK 17.05 support. Change-Id: I4f96cb3f002cd90b12d800d6904f2364d7c4e270 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-11-16dpdk: add additional data to TX traceDamjan Marion3-2/+9
Change-Id: I02b2b69db1e2afe62e3d3413034feb3bdcb3123e Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-11-16dpdk/ipsec: use physmem when creating poolsSergio Gonzalez Monroy3-84/+116
Change-Id: Ic4f797cea6fa21fb29d646256210357cf5267b38 Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
2017-11-14Fix typos in configure.ac and dpdk/buffer.cDamjan Marion1-8/+8
Change-Id: I74ff693315a3ffc7aa2640f25d906ca0d6da6bc5 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-11-13dpdk: introduce AVX512 variants of node functionsDamjan Marion3-60/+98
Change-Id: If581feca0d51d0420c971801aecdf9250c671b36 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-11-11dpdk: optimize buffer alloc/freeDamjan Marion1-49/+118
This reverts commit 45a588fa3efaaf52360986360ab1f6827bae3164. Change-Id: I7e541545791f7743ee827bdec8b6fc46cbb0938f Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-11-01dpdk/ipsec: align memorySergio Gonzalez Monroy2-5/+7
Change-Id: I2feb3e07c3070e8a525c539dd2feffa0dd1bca21 Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
2017-11-01dpdk/ipsec: fix digest physical addressSergio Gonzalez Monroy3-7/+7
VPP-1034 Change-Id: I02b4db9e52446ab8578df1f011dd27f39de64c70 Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
2017-10-25vlib: add support for multiple buffer poolsDamjan Marion5-11/+29
Change-Id: Icaf7d7ad47284aea7a56e8006b69f45874d64202 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-10-24Add extern to *_main global variable declarations in header files.Dave Wallace4-2/+5
- Global variables declared in header files without the use of the 'extern' keword will result in multiple instances of the variable to be created by the compiler -- one for each different source file in which the the header file is included. This results in wasted memory allocated in the BSS segments as well as potentially introducing bugs in the application. Change-Id: I6ef1790b60a0bd9dd3994f8510723decf258b0cc Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2017-10-18ipsec: use boolean or vs. bitwise or to avoid compiler errorAndrew Yourtchenko2-6/+6
Ubuntu 17.04, gcc version 6.3.0 20170406 (Ubuntu 6.3.0-12ubuntu2), "make build" fails with the few of the errors below: error: suggest parentheses around comparison in operand of ‘|’ [-Werror=parentheses] is_aead = (sa0->crypto_alg == IPSEC_CRYPTO_ALG_AES_GCM_128 | Solution: use the logical rather than the bitwise or. Change-Id: Iffcc1ed2e68b14b248159cb117593d32c623c553 Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2017-10-14change format_get_indent() to use u32 instead of uwordGabriel Ganne3-4/+4
This follows commit d3c008d108aa2187d1a2afe2833b4de25ca2c2ab by Christophe Fontaine. Change-Id: I0c4df40df44be2ac0ab25817fa050a1f619eca4d Signed-off-by: Gabriel Ganne <gabriel.ganne@enea.com>
2017-10-14plugins/dpdk: align memory to avoid potential segfault and false sharingGeorgina Sheehan1-1/+1
Made Update to src/plugins/dpdk/buffer.c Change-Id: I87bb8f38974a7be274c1b1d205f5513e7d068e48 Signed-off-by: Georgina <georgina.sheehan@intel.com>
2017-10-12dpdk/ipsec: coverity fixesSergio Gonzalez Monroy3-8/+8
Change-Id: Ica3bc74ffbb1c0df4e198b0abff8df10cdeb2182 Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
2017-10-10dpdk: fix mempool size calculationDamjan Marion1-2/+3
Change-Id: I5b48310c46ca8a2143b2132110240d7e9a52c25d Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-10-09vppapigen: support per-file (major,minor,patch) version stampsDave Barach1-0/+2
Add one of these statements to foo.api: vl_api_version 1.2.3 to generate a version tuple stanza in foo.api.h: /****** Version tuple *****/ vl_api_version_tuple(foo, 1, 2, 3) Change-Id: Ic514439e4677999daa8463a94f948f76b132ff15 Signed-off-by: Dave Barach <dave@barachs.net> Signed-off-by: Ole Troan <ot@cisco.com>
2017-10-05dpdk/ipsec: rework plus improved cli commandsSergio Gonzalez Monroy7-1653/+2419
This patch reworks the DPDK ipsec implementation including the cryptodev management as well as replacing new cli commands for better usability. For the data path: - The dpdk-esp-encrypt-post node is not necessary anymore. - IPv4 packets in the decrypt path are sent to ip4-input-no-checksum instead of ip4-input. The DPDK cryptodev cli commands are replaced by the following new commands: - show dpdk crypto devices - show dpdk crypto placement [verbose] - set dpdk crypto placement (<device> <thread> | auto) - clear dpdk crypto placement <device> [<thread>] - show dpdk crypto pools Change-Id: I47324517ede82d3e6e0e9f9c71c1a3433714b27b Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
2017-10-04[aarch64] Fixes CLI crashes on dpaa2 platform.Christophe Fontaine1-10/+10
- always use 'va_args' as pointer in all format_* functions - u32 for all 'indent' params as it's declaration was inconsistent Change-Id: Ic5799309a6b104c9b50fec309cba789c8da99e79 Signed-off-by: Christophe Fontaine <christophe.fontaine@enea.com>
2017-10-04dpdk: use vpp physmem allocator for dpdk buffersDamjan Marion2-63/+144
This allows us to have single contignuous allocation for DPDK buffers with single mmap FD, so buffer memory can be easily shared with diffrent process. As a consequence dpdk socket-mem is no longer in charge for allocating buffer memory, but still we need some space allocated for dpdk structures so default socket-mem is reduced form 256 to 64 MB. For a default of 16K buffers per numa node, physmem allocation is now 40MB, so basically this change reduces footprint from 256MB per socket to 48 (64 + 40). Change-Id: Ic8cfe83930a18411545b37a12b14aac89affd04f Signed-off-by: Damjan Marion <damarion@cisco.com> Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com> Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-10-03Repair vlib API socket serverDave Barach1-1/+0
- Teach vpp_api_test to send/receive API messages over sockets - Add memfd-based shared memory - Add api messages to create memfd-based shared memory segments - vpp_api_test supports both socket and shared memory segment connections - vpp_api_test pivot from socket to shared memory API messaging - add socket client support to libvlibclient.so - dead client reaper sends ping messages, container-friendly - dead client reaper falls back to kill (<pid>, 0) live checking if e.g. a python app goes silent for tens of seconds - handle ping messages in python client support code - teach show api ring about pairwise shared-memory segments - fix ip probing of already resolved destinations (VPP-998) We'll need this work to implement proper host-stack client isolation Change-Id: Ic23b65f75c854d0393d9a2e9d6b122a9551be769 Signed-off-by: Dave Barach <dave@barachs.net> Signed-off-by: Dave Wallace <dwallacelf@gmail.com> Signed-off-by: Florin Coras <fcoras@cisco.com>