summaryrefslogtreecommitdiffstats
path: root/src/plugins/dpdk
AgeCommit message (Collapse)AuthorFilesLines
2020-02-13dpdk: Add iova-mode to startupVladimir Ratnikov1-1/+2
In some cases of using vfio-pci driver, it should be required to enable pa or va mode. Without it, rtl_eal_init unable to allocate memory required. Debugging told that iova-mode pa/va could help. And it helps. This patch allows to pass iova-mode to vpp startup.conf Type: feature Change-Id: I36b87f5d3d141891b37cda2c306d50433954a34a Signed-off-by: Vladimir Ratnikov <vratnikov@netgate.com>
2020-02-05dpdk: use port_id as interface name suffix for representorsHaggai Eran1-1/+7
Type: feature Representor devices include a port ID as part of their switch_info struct, and it is helpful to use that in the interface name. Signed-off-by: Haggai Eran <haggai.eran@gmail.com> Change-Id: Id24627e7daf857f8b0e8ace2f592c098678081c7
2020-02-05dpdk: output switch informationHaggai Eran1-0/+21
Type: feature Output DPDK switch information to allow finding out which DPDK ports are associated with which DPDK representor ports. Signed-off-by: Haggai Eran <haggai.eran@gmail.com> Change-Id: I612cbd5a97e04787eca13423f53c7283d5945e37
2020-01-30misc: deprecate dpdk hqosDamjan Marion11-3355/+0
Not in functional state for a long time ... Type: refactor Change-Id: I2cc1525a6d49518cbc94faf6afbf0d2d0d515f56 Signed-off-by: Damjan Marion <damarion@cisco.com>
2020-01-22ipsec: re-enable DPDK IPSec for tunnel decap/encap (VPP-1823)Neale Ranns4-5/+27
Type: fix Change-Id: Iff9b1960b122f7d326efc37770b4ae3e81eb3122 Signed-off-by: Neale Ranns <nranns@cisco.com>
2020-01-14dpdk: enforce max tx retriesBenoît Ganne1-0/+1
n_retry was never decremented and so never enforced. Type: fix Change-Id: I71d60a72c156286f7e5b82b1c77a723361317c69 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2019-12-17flow: add ethernet flowChenmin Sun1-2/+68
Type: feature This patch adds the ethernet type flow support Signed-off-by: Chenmin Sun <chenmin.sun@intel.com> Change-Id: I6de163d04c6472df60a5f296fb428efd000267c4
2019-12-17dpdk: add devargs supportChenmin Sun3-12/+29
Type: feature This patch adds the devargs support for dpdk device The devargs are used as hardware-specific init args for dpdk devices please refer to the nic guides under $(DPDK_DIR)/doc/guides/nics/$(NIC_DRIVER).rst Signed-off-by: Chenmin Sun <chenmin.sun@intel.com> Change-Id: Id380d04720090bb66afe5ce09d664e5e248b8eb9
2019-12-06dpdk: use explicit types in apiOle Troan1-3/+4
Type: fix Signed-off-by: Ole Troan <ot@cisco.com> Change-Id: Iff7e995499e422003147342ff14de483d807b3f3
2019-12-04gso: remove the interface countMohsin Kazmi1-2/+0
Type: refactor Change-Id: I51405b9d09fb6fb03d08569369fdd4e11c647908 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2019-11-26flow: fix several crash issuesChenmin Sun1-2/+0
Type: fix This patch fixes crash issues(marked in brackets) in the below test cases test flow enable index 0 1/1 -> [crash] test flow disable index 0 1/1 -> [crash] test flow add src-ip 192.168.8.8 proto udp redirect-to-queue 8 test flow enable index 0 1/1 test flow disable index 0 1/1 - [crash] test flow add src-ip 192.168.8.8 proto udp redirect-to-queue 8 test flow enable index 0 1/1 test flow enable index 0 1/2 test flow del index 0 -> [crash] Signed-off-by: Chenmin Sun <chenmin.sun@intel.com> Change-Id: I84bc6faa3d93a2cab4c82e8a876a8b1067257b62
2019-11-20flow: Add GTP supportChenmin Sun1-28/+260
Type: feature Adding: VNET_FLOW_TYPE_IP4_GTPC VNET_FLOW_TYPE_IP4_GTPU VNET_FLOW_TYPE_IP4_GTPU_IP4 VNET_FLOW_TYPE_IP4_GTPU_IP6 VNET_FLOW_TYPE_IP6_GTPC VNET_FLOW_TYPE_IP6_GTPU VNET_FLOW_TYPE_IP6_GTPU_IP4 VNET_FLOW_TYPE_IP6_GTPU_IP6 in this patch Signed-off-by: Chenmin Sun <chenmin.sun@intel.com> Change-Id: I4ad53895b5ac0771432bb039b8c79e48e3c19f25
2019-11-19dpdk: fix non-NULL terminated stringBenoît Ganne1-1/+1
Type: fix Change-Id: Ic221cd4fcad89aece71239ed96152bf0311f3286 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2019-11-14dpdk: Enable bnxt PMDAndy Gospodarek3-1/+20
This adds support to compile the bnxt PMD that supports Broadcom's 10/25/40/50/100/200 Gbps NICs. Tested with modified DPDK driver on x86_64 and aarch64 targets that is pending upstream acceptance, but should compile just fine today. Type: feature Signed-off-by: Andy Gospodarek <gospo@broadcom.com> Change-Id: I735a991c4cae4fa77e5605094facea54b781a1db
2019-11-07dpdk: ipsec gcm fixesChristian Hopps3-25/+14
- Fix AAD initialization. With use-esn the aad data consists of the SPI and the 64-bit sequence number in big-endian order. Fix the u32 swapped code. - Remove salt-reinitialization. The GCM code seems inspired by the GCM RFCs recommendations on IKE keydata and how to produce a salt value (create an extra 4 octets of keying material). This is not IKE code though and the SA already holds the configured salt value which this code is blowing away. Use the configured value instead. Type: fix Change-Id: I5e75518aa7c1d91037bb24b2a40fe4fc90bdfdb0 Signed-off-by: Christian Hopps <chopps@labn.net>
2019-11-06dpdk: conditionally revert rte_vfio_dma_map patchDamjan Marion1-0/+5
DPDK have bug which will be fixed in 19.11. Type: fix Change-Id: I6c0058928e5991d61b3c5fcba706f35e6886b0f2 Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-11-01dpdk: fix tso not properly check the 'enable-tcp-udp-checksum' option issueChenmin Sun1-16/+15
Type: fix Fix tso did not properly check the 'enable-tcp-udp-checksum' option issue Add description of 'tso' and 'enable-tcp-udp-checksum' in startup.conf Signed-off-by: Chenmin Sun <chenmin.sun@intel.com> Change-Id: Id659067a9fa9e1db6c3f8dc533a2e90351b86831
2019-10-30dpdk: use local loggerPaul Vinciguerra1-5/+5
Type: fix Change-Id: I44922f70aef6a3c53f0f56c6d0656502c8fd69b2 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-10-29dpdk: replace deprecated VFIO API invocationDamjan Marion1-1/+2
Type: refactor Change-Id: I1712729b3f5d4ab659f51a2d3bf798db16b50820 Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-10-28vlib: don't use vector for keeping buffer indices in the poolDamjan Marion1-11/+7
Type: refactor Change-Id: I72221b97d7e0bf5c93e20bbda4473ca67bfcdeb4 Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-10-16dpdk: add function to add/del extra MAC addrsMatthew Smith1-0/+24
Type: feature Add a callback to install or remove an additional MAC address on a DPDK-managed device. Note that some PMDs don't have support for this so YMMV. Change-Id: I7b0cb3fb0af0d66fbdb7b894a712897f889520a5 Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2019-10-16flow: Add 'drop' and 'redirect-to-queue' actions supportChenmin Sun1-3/+20
Type: feature Add 'drop' and 'redirect-to-queue' support in 'test-flow' command and DPDK plugin Signed-off-by: Chenmin Sun <chenmin.sun@intel.com> Change-Id: I567bb77cb401c9bd1309ecabe802fe9de88c746b
2019-10-03dpdk: remove api boilerplateOle Troan6-236/+11
Type: refactor Signed-off-by: Ole Troan <ot@cisco.com> Change-Id: I2cba1e2912902b092348dddcf9cbcba231c75995
2019-09-30ipsec: allow null cipher with dpdk espChristian E. Hopps1-1/+2
The NULL cipher is a (valid) non-AEAD choice for ESP encrypt path. Allow it. Type: fix Signed-off-by: Christian E. Hopps <chopps@chopps.org> Change-Id: I6d8b66223a0ffb0952c2dd6fa898a8a2289fef7a
2019-09-24vlib: add flag to explicitelly mark nodes which can init per-node packet traceDamjan Marion2-0/+2
Type: feature Change-Id: I913f08383ee1c24d610c3d2aac07cef402570e2c Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-09-16dpdk: initialize rte_mbuf during mempool dequeueDamjan Marion1-1/+44
In some cases it may happen that buffer is allocated by DPDK, and freed by VPP native code. In such cases dpdk metadata is not reset, so we need to do that during mempool dequeue. Template approach is taken to reduce cost of that operation. Type: fix Fixes: 910d369 Change-Id: Ic239007cfc8fbceb965021c56963cda9d53f63be Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-09-12dpdk: fix null-termination of stringsElias Rudberg1-0/+3
Fix problem with some strings not being null-terminated, by using the vec_terminate_c_string macro in two places. The problem was found using AddressSanitizer. (Also make sure indentation is OK for those changes.) Ticket: VPP-1772 Type: fix Signed-off-by: Elias Rudberg <elias.rudberg@bahnhof.net> Change-Id: Ib7826e3c322e58b649e2d7f6053786da618a5e9e
2019-09-11dpdk: apply dual loop unrolling in DPDK TXLijian.Zhang1-0/+57
Too many prefetches within loop unrollings induce bottleneck and performance degradation on some CPUs which have less cache line fill buffers, e.g, Arm Cortex-A72. Apply dual loop unrolling and tune prefetches manually to remove hot-spot with prefetch instructions, to get throughput improvement. It brings about 1% throughput improvement and saves 8% clocks with the target node on Cortex-A72. Type: feature Change-Id: If3a64a04a77e90cd0240bc4d1186dbb09dac7df0 Signed-off-by: Lijian Zhang <Lijian.Zhang@arm.com>
2019-09-05dpdk: fix extended statsFilip Tehlar1-1/+1
Extended stats are not displayed due to incorrect condition. Type: fix Change-Id: Ie04664e6274137462dce832bf7ee06204cd77be5 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2019-08-30dpdk: enable checksum offload for Intel SRIOV NIC driversJohn Lo1-0/+8
Type: fix Signed-off-by: John Lo <loj@cisco.com> Change-Id: I3ee59106ba45164a4ee3788bf4dcf5bf4c2dc1c2
2019-08-21dpdk: bump DPDK version to 19.08Damjan Marion3-7/+4
Type: feature Change-Id: I16b8cdf0b6af6715a5f01ad84365a8c8a1b76237 Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-08-19dpdk: fix ipsec coverity warningMatthew Smith1-2/+4
Type: fix Fixes: 5025d40a1134272ab57c3c3f10311e31a65cd63c Update the expression for a conditional block which should be executed when an encrypted packet will be sent via IPv6. Coverity was complaining that a NULL pointer could be dereferenced. It is unclear whether that ever would have actually happened, but the updated expression should quell the warning and should more accurately detect whether the block for IPv6 should be executed. Change-Id: I731cad1f982e8f55bd44e6e05e98eff96f1957bb Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2019-08-19dpdk: add TSO support in dpdk plugin.Chenmin Sun3-1/+44
Type: feature You can enable tso in starup.conf like this: dev 0000:86:00.0{ tso on } TSO is disabled by default. Change-Id: Ifdbaf5322f768c384aa54e532d7bf45e810ca01c Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
2019-08-19dpdk: QAT devices update, add c4xxx and xeon d15xxJim Thompson1-1/+2
Type: feature Change-Id: I21f8f4563f5545a684b2666f7410847e0f7bc403 Signed-off-by: Jim Thompson <jim@netgate.com>
2019-08-15dpdk: ipsec tunnel support for ip6-in-ip4Matthew G Smith2-23/+10
Type: feature If an attempt was made to send an IPv6 packet over an IPv4 tunnel, the DPDK esp_encrypt did not complete setting up the crypto operation for a buffer, but still queued the crypto operations that were allocated. This results in a SEGV when attempting to dequeue them in dpdk-crypto-input. Allow IPv6 packets to be sent over a v4 tunnel when using the DPDK plugin esp crypto nodes. Change-Id: Ic9a4cd69b7fc06a17ab2f64ae806ec2ceacfef27 Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2019-08-06dpdk: remove SFP eeprom dump from 'show hardware-interfaces' and 'show ↵Lijian.Zhang1-2/+5
hardware-interfaces verbose' Type: fix It's time-consuming to execute 'show hardware-interfaces detail' in CSIT script. 'show hardware-interfaces' dumps SFP eeprom, via a software emulated I2C bus. Currently 'show hardware-interfaces', 'show hardware-interfaces verbose' and 'show hardware-interfaces detail' give exactly the same output, and they all will dump SFP eeprom. Will move the SFP eeprom dump to 'show hardware-interfaces detail' only, and use “show hardware-interfaces verbose” in CSIT script to save time. Change-Id: I1a6e5a0ca5fce5b4f0b9a6eb4e9dfd76d45b2487 Signed-off-by: Lijian Zhang <Lijian.Zhang@arm.com>
2019-07-26dpdk: fix vlan strippingNeale Ranns1-11/+15
Type: fix Fixes: ce3e971 Change-Id: I30bbeced2f5ae7613e65546f2b9b41e2fb514208 Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-07-24dpdk: Prefetch correct size of rte_mbufNitin Saxena1-1/+1
sizeof(rte_mbuf) is 128 byte but 2* CLIB_CACHE_LINE_BYTES is 256 byte for ThunderX/OCTEONTx targets. Type: fix Change-Id: If6893b168cf1c55c44bf4669a888ce858f2ef487 Signed-off-by: Nitin Saxena <nsaxena@marvell.com>
2019-07-24ipsec: GCM, Anti-replay and ESN fixessNeale Ranns1-2/+4
Type: fix Several Fixes: 1 - Anti-replay did not work with GCM becuase it overwrote the sequence number in the ESP header. To fix i added the seq num to the per-packet data so it is preserved 2 - The high sequence number was not byte swapped during ESP encrypt. 3 - openssl engine was the only one to return FAIL_DECRYPT for bad GCM the others return BAD_HMAC. removed the former 4 - improved tracing to show the low and high seq numbers 5 - documented the anti-replay window checks 6 - fixed scapy patch for ESN support for GCM 7 - tests for anti-reply (w/ and w/o ESN) for each crypto algo Change-Id: Id65d96b6d1d4dd821b2ab557e87468fff6d70e5b Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-07-18vlib: convert frame_index into real pointersAndreas Schultz1-1/+1
The fast path almost always has to deal with the real pointers. Deriving the frame pointer from a frame_index requires a load of the 32bit frame_index from memory, another 64bit load of the heap base pointer and some calculations. Lets store the full pointer instead and do a single 64bit load only. This helps avoiding problems when the heap is grown and frames are allocated below vm->heap_aligned_base. Type: refactor Change-Id: Ifa6e6e984aafe1e2755bff80f0a4dfcddee3623c Signed-off-by: Andreas Schultz <andreas.schultz@travelping.com> Signed-off-by: Dave Barach <dave@barachs.net>
2019-07-09vat: unload unused vat pluginsDave Barach1-23/+6
If the corresponding vpp plugin is absent, return a non-zero clib_error_t * from vat_plugin_register ("xxx plugin not loaded"). The vat plugin calls dlclose on the vat plugin, and it disappears. Depending on the plugin configuration, this can reduce the vpp virtual size by several gigabytes. Added a VAT_PLUGIN(<plugin-name>) macro to vat_helper_macros, clean up boilerplate vat_plugin_register() implementations. Fixed a number of non-standard vat_plugin_register methods. Type: refactor Change-Id: Iac908e5af7d5497c78d6aa9c3c51cdae08374045 Signed-off-by: Dave Barach <dave@barachs.net>
2019-06-25ipsec: print spi in hexadecimalGuillaume Solignac1-2/+3
Print the SPI in hexadecimal and decimal. Type: feature Change-Id: I012e94f9147058064e06c6bb4622ab6b6507957d Signed-off-by: Guillaume Solignac <gsoligna@cisco.com>
2019-06-18dpdk: check result of rte_mempool_create_emptyLijian.Zhang1-0/+15
Check the returned pointer, report error and return in case of failure. This avoids crashing without any useful clues or debug messages. Type: fix Change-Id: I15d0735a531c2d9a8b6f67b7d6fe326b98c963c3 Signed-off-by: Lijian Zhang <Lijian.Zhang@arm.com> Reviewed-by: Honnappa Nagarahalli <Honnappa.Nagarahalli@arm.com>
2019-06-06dpdk: fix clear hw statsFilip Tehlar3-3/+3
.. and remove helper stat struct for keeping last cleared stats. This is not needed anymore as dpdk lib provides rte_eth_dev_reset(). Change-Id: I78076e689aac7ca70836ce688dfa8e704f64cd84 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2019-06-04dpdk: rework extended statsFilip Tehlar4-47/+33
Change-Id: I421192e1921d4c9c5486a6dcca745582aebf4e3e Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2019-05-31Update vnet hardware flags if link state changesDave Barach1-1/+9
Explains a variety of hard-to-diagnose problems with certain Atom and Denverton NIC types. I finally tripped over a highly-repeatable failure: home gateway use-case bitten by refusal to negotiate a DHCP lease for the trunk port. The dhcp client won't send pkts unless VNET_HW_INTERFACE_FLAG_LINK_UP is set on the tx hw interface: /* Interface(s) down? */ if ((hw->flags & VNET_HW_INTERFACE_FLAG_LINK_UP) == 0) return; Change-Id: I17ef2ba7b39078555fa27d2d874a60c67e1530ee Signed-off-by: Dave Barach <dave@barachs.net>
2019-05-31bonding: add support for numa awarenessZhiyong Yang1-0/+1
This patch enables bonding numa awareness on multi-socket server working in active-backeup mode. The VPP adds capability for automatically preferring slave with local numa node in order to reduces the load on the QPI-bus and improve system overall performance in multi-socket use cases. Users doesn't need to add any extra operation as usual. Change-Id: Iec267375fc399a9a0c0a7dca649fadb994d36671 Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
2019-05-30dpdk: remove bonding codeDamjan Marion6-251/+11
We have native implementation and we should not maintain both.... Change-Id: Ic09ebffda52cdc733b3cfeff06690e0d3cc08084 Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-05-29dpdk: make sure each segment have initalized rte_mbufDamjan Marion1-12/+4
Change-Id: I0e28d059143fb7489d27a10c5b4a152d0d7dfb1f Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-05-27dpdk: vlan strip config does not take effect in default deviceChenmin Sun1-0/+6
copy vlan strip config from default device Change-Id: I4ad1c159bad964fd1900b5ae4960b7014dd9f9b1 Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>