Age | Commit message (Collapse) | Author | Files | Lines |
|
Not in functional state for a long time ...
Type: refactor
Change-Id: I2cc1525a6d49518cbc94faf6afbf0d2d0d515f56
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: fix
Change-Id: Iff9b1960b122f7d326efc37770b4ae3e81eb3122
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
n_retry was never decremented and so never enforced.
Type: fix
Change-Id: I71d60a72c156286f7e5b82b1c77a723361317c69
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: feature
This patch adds the ethernet type flow support
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
Change-Id: I6de163d04c6472df60a5f296fb428efd000267c4
|
|
Type: feature
This patch adds the devargs support for dpdk device
The devargs are used as hardware-specific init args for dpdk devices
please refer to the nic guides under
$(DPDK_DIR)/doc/guides/nics/$(NIC_DRIVER).rst
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
Change-Id: Id380d04720090bb66afe5ce09d664e5e248b8eb9
|
|
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: Iff7e995499e422003147342ff14de483d807b3f3
|
|
Type: refactor
Change-Id: I51405b9d09fb6fb03d08569369fdd4e11c647908
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: fix
This patch fixes crash issues(marked in brackets) in the below test cases
test flow enable index 0 1/1 -> [crash]
test flow disable index 0 1/1 -> [crash]
test flow add src-ip 192.168.8.8 proto udp redirect-to-queue 8
test flow enable index 0 1/1
test flow disable index 0 1/1 - [crash]
test flow add src-ip 192.168.8.8 proto udp redirect-to-queue 8
test flow enable index 0 1/1
test flow enable index 0 1/2
test flow del index 0 -> [crash]
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
Change-Id: I84bc6faa3d93a2cab4c82e8a876a8b1067257b62
|
|
Type: feature
Adding:
VNET_FLOW_TYPE_IP4_GTPC
VNET_FLOW_TYPE_IP4_GTPU
VNET_FLOW_TYPE_IP4_GTPU_IP4
VNET_FLOW_TYPE_IP4_GTPU_IP6
VNET_FLOW_TYPE_IP6_GTPC
VNET_FLOW_TYPE_IP6_GTPU
VNET_FLOW_TYPE_IP6_GTPU_IP4
VNET_FLOW_TYPE_IP6_GTPU_IP6
in this patch
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
Change-Id: I4ad53895b5ac0771432bb039b8c79e48e3c19f25
|
|
Type: fix
Change-Id: Ic221cd4fcad89aece71239ed96152bf0311f3286
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
This adds support to compile the bnxt PMD that supports Broadcom's
10/25/40/50/100/200 Gbps NICs. Tested with modified DPDK driver on
x86_64 and aarch64 targets that is pending upstream acceptance, but
should compile just fine today.
Type: feature
Signed-off-by: Andy Gospodarek <gospo@broadcom.com>
Change-Id: I735a991c4cae4fa77e5605094facea54b781a1db
|
|
- Fix AAD initialization. With use-esn the aad data consists of the SPI
and the 64-bit sequence number in big-endian order. Fix the u32 swapped
code.
- Remove salt-reinitialization. The GCM code seems inspired by the GCM
RFCs recommendations on IKE keydata and how to produce a salt
value (create an extra 4 octets of keying material). This is not IKE
code though and the SA already holds the configured salt value which
this code is blowing away. Use the configured value instead.
Type: fix
Change-Id: I5e75518aa7c1d91037bb24b2a40fe4fc90bdfdb0
Signed-off-by: Christian Hopps <chopps@labn.net>
|
|
DPDK have bug which will be fixed in 19.11.
Type: fix
Change-Id: I6c0058928e5991d61b3c5fcba706f35e6886b0f2
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: fix
Fix tso did not properly check the 'enable-tcp-udp-checksum' option issue
Add description of 'tso' and 'enable-tcp-udp-checksum' in startup.conf
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
Change-Id: Id659067a9fa9e1db6c3f8dc533a2e90351b86831
|
|
Type: fix
Change-Id: I44922f70aef6a3c53f0f56c6d0656502c8fd69b2
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Type: refactor
Change-Id: I1712729b3f5d4ab659f51a2d3bf798db16b50820
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: refactor
Change-Id: I72221b97d7e0bf5c93e20bbda4473ca67bfcdeb4
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: feature
Add a callback to install or remove an additional MAC address on
a DPDK-managed device. Note that some PMDs don't have support for
this so YMMV.
Change-Id: I7b0cb3fb0af0d66fbdb7b894a712897f889520a5
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Type: feature
Add 'drop' and 'redirect-to-queue' support in
'test-flow' command and DPDK plugin
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
Change-Id: I567bb77cb401c9bd1309ecabe802fe9de88c746b
|
|
Type: refactor
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: I2cba1e2912902b092348dddcf9cbcba231c75995
|
|
The NULL cipher is a (valid) non-AEAD choice for ESP encrypt path.
Allow it.
Type: fix
Signed-off-by: Christian E. Hopps <chopps@chopps.org>
Change-Id: I6d8b66223a0ffb0952c2dd6fa898a8a2289fef7a
|
|
Type: feature
Change-Id: I913f08383ee1c24d610c3d2aac07cef402570e2c
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
In some cases it may happen that buffer is allocated by DPDK, and freed
by VPP native code. In such cases dpdk metadata is not reset, so we need
to do that during mempool dequeue. Template approach is taken to reduce
cost of that operation.
Type: fix
Fixes: 910d369
Change-Id: Ic239007cfc8fbceb965021c56963cda9d53f63be
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Fix problem with some strings not being null-terminated,
by using the vec_terminate_c_string macro in two places.
The problem was found using AddressSanitizer.
(Also make sure indentation is OK for those changes.)
Ticket: VPP-1772
Type: fix
Signed-off-by: Elias Rudberg <elias.rudberg@bahnhof.net>
Change-Id: Ib7826e3c322e58b649e2d7f6053786da618a5e9e
|
|
Too many prefetches within loop unrollings induce bottleneck and
performance degradation on some CPUs which have less cache line fill
buffers, e.g, Arm Cortex-A72.
Apply dual loop unrolling and tune prefetches manually to remove
hot-spot with prefetch instructions, to get throughput improvement.
It brings about 1% throughput improvement and saves 8% clocks with
the target node on Cortex-A72.
Type: feature
Change-Id: If3a64a04a77e90cd0240bc4d1186dbb09dac7df0
Signed-off-by: Lijian Zhang <Lijian.Zhang@arm.com>
|
|
Extended stats are not displayed due to incorrect condition.
Type: fix
Change-Id: Ie04664e6274137462dce832bf7ee06204cd77be5
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Type: fix
Signed-off-by: John Lo <loj@cisco.com>
Change-Id: I3ee59106ba45164a4ee3788bf4dcf5bf4c2dc1c2
|
|
Type: feature
Change-Id: I16b8cdf0b6af6715a5f01ad84365a8c8a1b76237
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: fix
Fixes: 5025d40a1134272ab57c3c3f10311e31a65cd63c
Update the expression for a conditional block which should be executed
when an encrypted packet will be sent via IPv6. Coverity was
complaining that a NULL pointer could be dereferenced. It is unclear
whether that ever would have actually happened, but the updated
expression should quell the warning and should more accurately detect
whether the block for IPv6 should be executed.
Change-Id: I731cad1f982e8f55bd44e6e05e98eff96f1957bb
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Type: feature
You can enable tso in starup.conf like this:
dev 0000:86:00.0{
tso on
}
TSO is disabled by default.
Change-Id: Ifdbaf5322f768c384aa54e532d7bf45e810ca01c
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
|
|
Type: feature
Change-Id: I21f8f4563f5545a684b2666f7410847e0f7bc403
Signed-off-by: Jim Thompson <jim@netgate.com>
|
|
Type: feature
If an attempt was made to send an IPv6 packet over an IPv4 tunnel,
the DPDK esp_encrypt did not complete setting up
the crypto operation for a buffer, but still queued the crypto
operations that were allocated. This results in a SEGV when
attempting to dequeue them in dpdk-crypto-input.
Allow IPv6 packets to be sent over a v4 tunnel when using the DPDK
plugin esp crypto nodes.
Change-Id: Ic9a4cd69b7fc06a17ab2f64ae806ec2ceacfef27
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
hardware-interfaces verbose'
Type: fix
It's time-consuming to execute 'show hardware-interfaces detail' in CSIT script.
'show hardware-interfaces' dumps SFP eeprom, via a software emulated I2C bus.
Currently 'show hardware-interfaces', 'show hardware-interfaces verbose' and
'show hardware-interfaces detail' give exactly the same output,
and they all will dump SFP eeprom.
Will move the SFP eeprom dump to 'show hardware-interfaces detail' only,
and use “show hardware-interfaces verbose” in CSIT script to save time.
Change-Id: I1a6e5a0ca5fce5b4f0b9a6eb4e9dfd76d45b2487
Signed-off-by: Lijian Zhang <Lijian.Zhang@arm.com>
|
|
Type: fix
Fixes: ce3e971
Change-Id: I30bbeced2f5ae7613e65546f2b9b41e2fb514208
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
sizeof(rte_mbuf) is 128 byte but 2* CLIB_CACHE_LINE_BYTES
is 256 byte for ThunderX/OCTEONTx targets.
Type: fix
Change-Id: If6893b168cf1c55c44bf4669a888ce858f2ef487
Signed-off-by: Nitin Saxena <nsaxena@marvell.com>
|
|
Type: fix
Several Fixes:
1 - Anti-replay did not work with GCM becuase it overwrote the sequence
number in the ESP header. To fix i added the seq num to the per-packet
data so it is preserved
2 - The high sequence number was not byte swapped during ESP encrypt.
3 - openssl engine was the only one to return FAIL_DECRYPT for bad GCM
the others return BAD_HMAC. removed the former
4 - improved tracing to show the low and high seq numbers
5 - documented the anti-replay window checks
6 - fixed scapy patch for ESN support for GCM
7 - tests for anti-reply (w/ and w/o ESN) for each crypto algo
Change-Id: Id65d96b6d1d4dd821b2ab557e87468fff6d70e5b
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
The fast path almost always has to deal with the real
pointers. Deriving the frame pointer from a frame_index requires a
load of the 32bit frame_index from memory, another 64bit load of the
heap base pointer and some calculations.
Lets store the full pointer instead and do a single 64bit load only.
This helps avoiding problems when the heap is grown and frames are
allocated below vm->heap_aligned_base.
Type: refactor
Change-Id: Ifa6e6e984aafe1e2755bff80f0a4dfcddee3623c
Signed-off-by: Andreas Schultz <andreas.schultz@travelping.com>
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
If the corresponding vpp plugin is absent, return a non-zero
clib_error_t * from vat_plugin_register ("xxx plugin not loaded"). The
vat plugin calls dlclose on the vat plugin, and it disappears.
Depending on the plugin configuration, this can reduce the vpp virtual
size by several gigabytes.
Added a VAT_PLUGIN(<plugin-name>) macro to vat_helper_macros, clean up
boilerplate vat_plugin_register() implementations. Fixed a number of
non-standard vat_plugin_register methods.
Type: refactor
Change-Id: Iac908e5af7d5497c78d6aa9c3c51cdae08374045
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Print the SPI in hexadecimal and decimal.
Type: feature
Change-Id: I012e94f9147058064e06c6bb4622ab6b6507957d
Signed-off-by: Guillaume Solignac <gsoligna@cisco.com>
|
|
Check the returned pointer, report error and return in case of failure.
This avoids crashing without any useful clues or debug messages.
Type: fix
Change-Id: I15d0735a531c2d9a8b6f67b7d6fe326b98c963c3
Signed-off-by: Lijian Zhang <Lijian.Zhang@arm.com>
Reviewed-by: Honnappa Nagarahalli <Honnappa.Nagarahalli@arm.com>
|
|
.. and remove helper stat struct for keeping last cleared stats.
This is not needed anymore as dpdk lib provides rte_eth_dev_reset().
Change-Id: I78076e689aac7ca70836ce688dfa8e704f64cd84
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Change-Id: I421192e1921d4c9c5486a6dcca745582aebf4e3e
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Explains a variety of hard-to-diagnose problems with certain Atom and
Denverton NIC types.
I finally tripped over a highly-repeatable failure: home gateway
use-case bitten by refusal to negotiate a DHCP lease for the trunk
port.
The dhcp client won't send pkts unless VNET_HW_INTERFACE_FLAG_LINK_UP
is set on the tx hw interface:
/* Interface(s) down? */
if ((hw->flags & VNET_HW_INTERFACE_FLAG_LINK_UP) == 0)
return;
Change-Id: I17ef2ba7b39078555fa27d2d874a60c67e1530ee
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
This patch enables bonding numa awareness on multi-socket
server working in active-backeup mode.
The VPP adds capability for automatically preferring slave
with local numa node in order to reduces the load on the
QPI-bus and improve system overall performance in multi-socket
use cases. Users doesn't need to add any extra operation as
usual.
Change-Id: Iec267375fc399a9a0c0a7dca649fadb994d36671
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
|
|
We have native implementation and we should not maintain both....
Change-Id: Ic09ebffda52cdc733b3cfeff06690e0d3cc08084
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I0e28d059143fb7489d27a10c5b4a152d0d7dfb1f
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
copy vlan strip config from default device
Change-Id: I4ad1c159bad964fd1900b5ae4960b7014dd9f9b1
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
|
|
Reorder foreach_dpdk_rss_hf to fix rss configuration error issue.
Change-Id: Idec45534cd7dfe810b25584b1b27ac52b1c45110
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
|
|
show_dpdk_hqos_queue_stats
Change-Id: Ic1a900e0fb85ee016af21535764dfca2e6282194
Signed-off-by: cohu <cong.hu@tieto.com>
|
|
When the same worker thread processes packet for encrypt and decrypt,
ie. single worker with bi-directional traffic, given that the queue is
shared results in packets to be decrypted being dropped as the encrypt
always happens first for each main loop.
With this change, each crypto device queue is logically split into two
queues, each half the real size, avoiding the described problem.
Change-Id: Ifd3f15e316c92fbd6ca05802456b10a7f73f85da
Signed-off-by: Sergio Gonzalez Monroy <sgmonroy@gmail.com>
|