aboutsummaryrefslogtreecommitdiffstats
path: root/src/plugins/dpdk
AgeCommit message (Collapse)AuthorFilesLines
2019-11-15dpdk: use local loggerPaul Vinciguerra1-5/+5
Type: fix Change-Id: I44922f70aef6a3c53f0f56c6d0656502c8fd69b2 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com> (cherry picked from commit 59c110736bb173b9d65ced3020ea794daa0ff000)
2019-11-05dpdk: fix tso not properly check the 'enable-tcp-udp-checksum' option issueChenmin Sun1-16/+15
Type: fix Fix tso did not properly check the 'enable-tcp-udp-checksum' option issue Add description of 'tso' and 'enable-tcp-udp-checksum' in startup.conf Signed-off-by: Chenmin Sun <chenmin.sun@intel.com> Change-Id: Id659067a9fa9e1db6c3f8dc533a2e90351b86831 (cherry picked from commit 5bec5f7860dafcef6aefd50b74de15d08910c6f4)
2019-10-03ipsec: allow null cipher with dpdk espChristian E. Hopps1-1/+2
The NULL cipher is a (valid) non-AEAD choice for ESP encrypt path. Allow it. Type: fix Signed-off-by: Christian E. Hopps <chopps@chopps.org> Change-Id: I6d8b66223a0ffb0952c2dd6fa898a8a2289fef7a (cherry picked from commit 5a2426386d31c90e833c639332a80a8b60bfed2f)
2019-10-03vlib: add flag to explicitelly mark nodes which can init per-node packet traceDamjan Marion2-0/+2
Type: feature Change-Id: I913f08383ee1c24d610c3d2aac07cef402570e2c Signed-off-by: Damjan Marion <damarion@cisco.com> (cherry picked from commit 7ca5aaac10e95306f74ea4afd52110dd46aa0381)
2019-09-30dpdk: fix null-termination of stringsElias Rudberg1-0/+3
Fix problem with some strings not being null-terminated, by using the vec_terminate_c_string macro in two places. The problem was found using AddressSanitizer. (Also make sure indentation is OK for those changes.) Ticket: VPP-1772 Type: fix Signed-off-by: Elias Rudberg <elias.rudberg@bahnhof.net> Change-Id: Ib7826e3c322e58b649e2d7f6053786da618a5e9e (cherry picked from commit 7fd402163c221919446942c0784073a56bfd4f70)
2019-09-21dpdk: fix ipsec coverity warningMatthew Smith1-2/+4
Type: fix Fixes: 5025d40a1134272ab57c3c3f10311e31a65cd63c Update the expression for a conditional block which should be executed when an encrypted packet will be sent via IPv6. Coverity was complaining that a NULL pointer could be dereferenced. It is unclear whether that ever would have actually happened, but the updated expression should quell the warning and should more accurately detect whether the block for IPv6 should be executed. Change-Id: I731cad1f982e8f55bd44e6e05e98eff96f1957bb Signed-off-by: Matthew Smith <mgsmith@netgate.com> (cherry picked from commit c458f5c09a21cc905aa1b53eda30736e52426418)
2019-09-21dpdk: add TSO support in dpdk plugin.Chenmin Sun3-1/+44
Type: feature You can enable tso in starup.conf like this: dev 0000:86:00.0{ tso on } TSO is disabled by default. Change-Id: Ifdbaf5322f768c384aa54e532d7bf45e810ca01c Signed-off-by: Chenmin Sun <chenmin.sun@intel.com> (cherry picked from commit de5ed58fdb72536ed928e12990a08104e1f89f51)
2019-09-21dpdk: QAT devices update, add c4xxx and xeon d15xxJim Thompson1-1/+2
Type: feature Change-Id: I21f8f4563f5545a684b2666f7410847e0f7bc403 Signed-off-by: Jim Thompson <jim@netgate.com> (cherry picked from commit 4d843b9940a8fbcd0b54c8a66916b9ba66e4f2c9)
2019-09-19dpdk: ipsec tunnel support for ip6-in-ip4Matthew G Smith2-23/+10
Type: feature If an attempt was made to send an IPv6 packet over an IPv4 tunnel, the DPDK esp_encrypt did not complete setting up the crypto operation for a buffer, but still queued the crypto operations that were allocated. This results in a SEGV when attempting to dequeue them in dpdk-crypto-input. Allow IPv6 packets to be sent over a v4 tunnel when using the DPDK plugin esp crypto nodes. Change-Id: Ic9a4cd69b7fc06a17ab2f64ae806ec2ceacfef27 Signed-off-by: Matthew Smith <mgsmith@netgate.com> (cherry picked from commit 5025d40a1134272ab57c3c3f10311e31a65cd63c)
2019-09-09dpdk: initialize rte_mbuf during mempool dequeueDamjan Marion1-1/+44
In some cases it may happen that buffer is allocated by DPDK, and freed by VPP native code. In such cases dpdk metadata is not reset, so we need to do that during mempool dequeue. Template approach is taken to reduce cost of that operation. Type: fix Fixes: 910d369 Change-Id: Ic239007cfc8fbceb965021c56963cda9d53f63be Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-09-09dpdk: fix extended statsFilip Tehlar1-1/+1
Extended stats are not displayed due to incorrect condition. Type: fix Change-Id: Ie04664e6274137462dce832bf7ee06204cd77be5 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2019-08-30dpdk: enable checksum offload for Intel SRIOV NIC driversJohn Lo1-0/+8
Type: fix Signed-off-by: John Lo <loj@cisco.com> Change-Id: I3ee59106ba45164a4ee3788bf4dcf5bf4c2dc1c2 (cherry picked from commit 03598c4bcc639cbfc9afa13c5b4e52440f9eae2b)
2019-08-06dpdk: remove SFP eeprom dump from 'show hardware-interfaces' and 'show ↵Lijian.Zhang1-2/+5
hardware-interfaces verbose' Type: fix It's time-consuming to execute 'show hardware-interfaces detail' in CSIT script. 'show hardware-interfaces' dumps SFP eeprom, via a software emulated I2C bus. Currently 'show hardware-interfaces', 'show hardware-interfaces verbose' and 'show hardware-interfaces detail' give exactly the same output, and they all will dump SFP eeprom. Will move the SFP eeprom dump to 'show hardware-interfaces detail' only, and use “show hardware-interfaces verbose” in CSIT script to save time. Change-Id: I1a6e5a0ca5fce5b4f0b9a6eb4e9dfd76d45b2487 Signed-off-by: Lijian Zhang <Lijian.Zhang@arm.com>
2019-07-26dpdk: fix vlan strippingNeale Ranns1-11/+15
Type: fix Fixes: ce3e971 Change-Id: I30bbeced2f5ae7613e65546f2b9b41e2fb514208 Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-07-24dpdk: Prefetch correct size of rte_mbufNitin Saxena1-1/+1
sizeof(rte_mbuf) is 128 byte but 2* CLIB_CACHE_LINE_BYTES is 256 byte for ThunderX/OCTEONTx targets. Type: fix Change-Id: If6893b168cf1c55c44bf4669a888ce858f2ef487 Signed-off-by: Nitin Saxena <nsaxena@marvell.com>
2019-07-24ipsec: GCM, Anti-replay and ESN fixessNeale Ranns1-2/+4
Type: fix Several Fixes: 1 - Anti-replay did not work with GCM becuase it overwrote the sequence number in the ESP header. To fix i added the seq num to the per-packet data so it is preserved 2 - The high sequence number was not byte swapped during ESP encrypt. 3 - openssl engine was the only one to return FAIL_DECRYPT for bad GCM the others return BAD_HMAC. removed the former 4 - improved tracing to show the low and high seq numbers 5 - documented the anti-replay window checks 6 - fixed scapy patch for ESN support for GCM 7 - tests for anti-reply (w/ and w/o ESN) for each crypto algo Change-Id: Id65d96b6d1d4dd821b2ab557e87468fff6d70e5b Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-07-18vlib: convert frame_index into real pointersAndreas Schultz1-1/+1
The fast path almost always has to deal with the real pointers. Deriving the frame pointer from a frame_index requires a load of the 32bit frame_index from memory, another 64bit load of the heap base pointer and some calculations. Lets store the full pointer instead and do a single 64bit load only. This helps avoiding problems when the heap is grown and frames are allocated below vm->heap_aligned_base. Type: refactor Change-Id: Ifa6e6e984aafe1e2755bff80f0a4dfcddee3623c Signed-off-by: Andreas Schultz <andreas.schultz@travelping.com> Signed-off-by: Dave Barach <dave@barachs.net>
2019-07-09vat: unload unused vat pluginsDave Barach1-23/+6
If the corresponding vpp plugin is absent, return a non-zero clib_error_t * from vat_plugin_register ("xxx plugin not loaded"). The vat plugin calls dlclose on the vat plugin, and it disappears. Depending on the plugin configuration, this can reduce the vpp virtual size by several gigabytes. Added a VAT_PLUGIN(<plugin-name>) macro to vat_helper_macros, clean up boilerplate vat_plugin_register() implementations. Fixed a number of non-standard vat_plugin_register methods. Type: refactor Change-Id: Iac908e5af7d5497c78d6aa9c3c51cdae08374045 Signed-off-by: Dave Barach <dave@barachs.net>
2019-06-25ipsec: print spi in hexadecimalGuillaume Solignac1-2/+3
Print the SPI in hexadecimal and decimal. Type: feature Change-Id: I012e94f9147058064e06c6bb4622ab6b6507957d Signed-off-by: Guillaume Solignac <gsoligna@cisco.com>
2019-06-18dpdk: check result of rte_mempool_create_emptyLijian.Zhang1-0/+15
Check the returned pointer, report error and return in case of failure. This avoids crashing without any useful clues or debug messages. Type: fix Change-Id: I15d0735a531c2d9a8b6f67b7d6fe326b98c963c3 Signed-off-by: Lijian Zhang <Lijian.Zhang@arm.com> Reviewed-by: Honnappa Nagarahalli <Honnappa.Nagarahalli@arm.com>
2019-06-06dpdk: fix clear hw statsFilip Tehlar3-3/+3
.. and remove helper stat struct for keeping last cleared stats. This is not needed anymore as dpdk lib provides rte_eth_dev_reset(). Change-Id: I78076e689aac7ca70836ce688dfa8e704f64cd84 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2019-06-04dpdk: rework extended statsFilip Tehlar4-47/+33
Change-Id: I421192e1921d4c9c5486a6dcca745582aebf4e3e Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2019-05-31Update vnet hardware flags if link state changesDave Barach1-1/+9
Explains a variety of hard-to-diagnose problems with certain Atom and Denverton NIC types. I finally tripped over a highly-repeatable failure: home gateway use-case bitten by refusal to negotiate a DHCP lease for the trunk port. The dhcp client won't send pkts unless VNET_HW_INTERFACE_FLAG_LINK_UP is set on the tx hw interface: /* Interface(s) down? */ if ((hw->flags & VNET_HW_INTERFACE_FLAG_LINK_UP) == 0) return; Change-Id: I17ef2ba7b39078555fa27d2d874a60c67e1530ee Signed-off-by: Dave Barach <dave@barachs.net>
2019-05-31bonding: add support for numa awarenessZhiyong Yang1-0/+1
This patch enables bonding numa awareness on multi-socket server working in active-backeup mode. The VPP adds capability for automatically preferring slave with local numa node in order to reduces the load on the QPI-bus and improve system overall performance in multi-socket use cases. Users doesn't need to add any extra operation as usual. Change-Id: Iec267375fc399a9a0c0a7dca649fadb994d36671 Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
2019-05-30dpdk: remove bonding codeDamjan Marion6-251/+11
We have native implementation and we should not maintain both.... Change-Id: Ic09ebffda52cdc733b3cfeff06690e0d3cc08084 Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-05-29dpdk: make sure each segment have initalized rte_mbufDamjan Marion1-12/+4
Change-Id: I0e28d059143fb7489d27a10c5b4a152d0d7dfb1f Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-05-27dpdk: vlan strip config does not take effect in default deviceChenmin Sun1-0/+6
copy vlan strip config from default device Change-Id: I4ad1c159bad964fd1900b5ae4960b7014dd9f9b1 Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
2019-05-27dpdk: fix rss configuration error issueChenmin Sun1-7/+5
Reorder foreach_dpdk_rss_hf to fix rss configuration error issue. Change-Id: Idec45534cd7dfe810b25584b1b27ac52b1c45110 Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
2019-05-23fix rte_eth_dev_info’ has no member named ‘pci_dev’ when run ↵cohu1-5/+9
show_dpdk_hqos_queue_stats Change-Id: Ic1a900e0fb85ee016af21535764dfca2e6282194 Signed-off-by: cohu <cong.hu@tieto.com>
2019-05-17dpdk-ipsec: fix encrypt/decrypt single queueSergio Gonzalez Monroy6-39/+58
When the same worker thread processes packet for encrypt and decrypt, ie. single worker with bi-directional traffic, given that the queue is shared results in packets to be decrypted being dropped as the encrypt always happens first for each main loop. With this change, each crypto device queue is logically split into two queues, each half the real size, avoiding the described problem. Change-Id: Ifd3f15e316c92fbd6ca05802456b10a7f73f85da Signed-off-by: Sergio Gonzalez Monroy <sgmonroy@gmail.com>
2019-05-16init / exit function orderingDave Barach5-15/+20
The vlib init function subsystem now supports a mix of procedural and formally-specified ordering constraints. We should eliminate procedural knowledge wherever possible. The following schemes are *roughly* equivalent: static clib_error_t *init_runs_first (vlib_main_t *vm) { clib_error_t *error; ... do some stuff... if ((error = vlib_call_init_function (init_runs_next))) return error; ... } VLIB_INIT_FUNCTION (init_runs_first); and static clib_error_t *init_runs_first (vlib_main_t *vm) { ... do some stuff... } VLIB_INIT_FUNCTION (init_runs_first) = { .runs_before = VLIB_INITS("init_runs_next"), }; The first form will [most likely] call "init_runs_next" on the spot. The second form means that "init_runs_first" runs before "init_runs_next," possibly much earlier in the sequence. Please DO NOT construct sets of init functions where A before B actually means A *right before* B. It's not necessary - simply combine A and B - and it leads to hugely annoying debugging exercises when trying to switch from ad-hoc procedural ordering constraints to formal ordering constraints. Change-Id: I5e4353503bf43b4acb11a45fb33c79a5ade8426c Signed-off-by: Dave Barach <dave@barachs.net>
2019-05-14IPSEC: remove unecessary pass by reference of sequence numberNeale Ranns1-1/+1
Change-Id: Id406eb8c69a89c57305d8f138e8e6730037aa799 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-05-14IPsec: increment tunnel intf tx countersMatthew Smith1-0/+9
Recent changes removed the function that was incrementing the tx counters. Increment them in the esp_encrypt functions. Change-Id: I446333a23ccf66e34893adb2aa49af562cf35507 Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2019-05-09dpdk: fix return variable sizeZhiyong Yang1-2/+2
The function dpdk_ol_flags_extract should return u16 instead of u8. Change-Id: Id0b08b04c93598818f9a2eee5a88733900320dfa Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
2019-04-25Change dpdk thread data flags type to u16 from u8 to get more useful dataSimon Zhang2-6/+7
Change-Id: Idc3763c38f5aa638d4f290f4d4730577601d78b8 Signed-off-by: Simon Zhang <yuwei1.zhang@intel.com>
2019-04-25IPSEC; dpdk backend for tunnel interface encryptionNeale Ranns2-4/+75
Change-Id: Ide2a9df18db371c8428855d7f12f246006d7c04c Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-04-24dpdk: fix interface namingFlorin Coras1-1/+1
Change-Id: Ia092a93a7ac0cbf9338f9d4a5db8b94b23549a13 Signed-off-by: Florin Coras <fcoras@cisco.com>
2019-04-24dpdk: get a rid of "Invalid port_id=" log messageDamjan Marion1-3/+5
Change-Id: I65e7188c6893acca67455ff37f2dfbd0bedd5c09 Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-04-23dpdk_esp_encrypt: add to prefetch dataZhiyong Yang1-3/+13
The memory areas storing vlib_buffer_t and ip4|6_and_esp_header_t are not prefetched. The patch help dpdk_esp_encrypt to reduce 18 clocks/pkt from 149 to 131 on Haswell when running IPsec in tunnel mode. Change-Id: I4f4e9e2b3982a4b7810cab8ed828a5e4631f8f8c Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
2019-04-17Predicate a packet whether be marked by PKT_RX_FDIR_ID instead of PKT_RX_FDIRSimon Zhang1-1/+1
Change-Id: I65b1af5fa0cec4f9789f91f720d1396d06fa0206 Signed-off-by: Simon Zhang <yuwei1.zhang@intel.com>
2019-04-17Default nums of RX/TX descriptors changed to 512 for 2M page on DVNZhiyong Yang1-1/+63
As DVN has fewer DTLB entries supported for 2M page, default numbers of RX/TX descriptors are changed to 512 if nums of RX/TX descriptors are not specified by VPP users. Change-Id: I076493b802b15d12750a5b49d1554da4d19ad460 Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
2019-04-16Add direct packets to specific flow action in dpdk flowSimon Zhang2-4/+17
Change-Id: I48cd8052f9509efdf13f64ab279edb66a2d4a0a9 Signed-off-by: Simon Zhang <yuwei1.zhang@intel.com>
2019-04-16flow: add rte_flow check before creating by rte_flow_validateSimon Zhang1-0/+14
Change-Id: Idfcf1644952d647c6e1b61216d9b365d58b77814 Signed-off-by: Simon Zhang <yuwei1.zhang@intel.com>
2019-04-08rdma: fix DPDK MLX driver conflictBenoît Ganne1-5/+1
VPP rdma driver relies on an internal rdma-core not compatible with DPDK MLX driver. Force the use of external rdma-core through RTE_IBVERBS_LINK_DLOPEN DPDK build option and make sure internal rdma-core symbols are not leaked outside of the rdma plugin. Change-Id: I5b2281259f517c4e109d388d172b72eadd69986f Signed-off-by: Benoît Ganne <bganne@cisco.com>
2019-04-02dpdk: fix build error when mlx support enabledMatthew Smith1-1/+1
When building with environment variables set to enable mlx PMD support in DPDK, an error occurs: CMake Error at plugins/dpdk/CMakeLists.txt:104 (vpp_plugin_find_library): vpp_plugin_find_library Macro invoked with incorrect arguments for macro named: vpp_plugin_find_library Update a call to vpp_plugin_find_library() to include the right number of parameters. Change-Id: Ia0d66f93c6f94fdf822e2c3c4fe3f0ad01a90d57 Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2019-03-28ipsec: USE_EXTENDED_SEQ_NUM -> USE_ESNDamjan Marion3-5/+5
Change-Id: Ib828ea5106f3ae280e4ce233f2462dee363580b7 Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-03-28cmake: add vpp_plugin_find_library macroDamjan Marion1-21/+9
Change-Id: I0b996460e05c40e74766563fb2a94c62a65063ce Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-03-28ipsec: anti-replay code cleanupDamjan Marion1-35/+15
Change-Id: Ib73352d6be26d639a7f9d47ca0570a1248bff04a Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-03-27ipsec: compress ipsec_sa_t so data used by dataplane code fits in cachelineDamjan Marion3-22/+24
Change-Id: I81ecdf9fdcfcb017117b47dc031f93208e004d7c Signed-off-by: Damjan Marion <damarion@cisco.com> Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-03-22dpdk: do not enable VLAN stripping on Cisco VIC adapters by defaultHyong Youb Kim1-11/+22
With the following local patch, VIC adapters remove default vlan tags from ingress packets. So, it is no longer necessary to enable VLAN stripping by default. This change also allows VLAN sub interfaces to work with VIC adapters. patches/dpdk_19.02/0001-net-enic-untag-default-vlan-by-default.patch Change-Id: I2e7d62c62120c351c27d827d90de4a8335efa044 Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>