src/plugins/flowperpkt

# Copyright (c) 2019 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
#
#     http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

*** Settings ***
| Resource | resources/libraries/robot/performance/performance_setup.robot
| ...
| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR
| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 2R2C
| ... | NF_DENSITY | PIPELINE | NF_VPPIP4
| ...
| Suite Setup | Run Keywords
| ... | Set up 2-node performance topology with DUT's NIC model | L3
| ... | Intel-X710
| ... | AND | Set up performance test suite with MEMIF
| ...
| Suite Teardown | Tear down 2-node performance topology
| ...
| Test Setup | Set up performance test
| ...
| Test Teardown | Run Keywords
| ... | Tear down performance mrr test
| ... | AND | Tear down performance test with container
| ...
| Test Template | Local Template
| ...
| Documentation | *Raw results L2BD test cases with 4memif 2 pipelines 4 docker
| ... | containers*
| ...
| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
| ... | single links between nodes.
| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
| ... | and MAC learning enabled. DUT1 tested with 2p10GE NIC X710 by Intel.
| ... | Container is connected to VPP via Memif interface. Container is running
| ... | same VPP version as running on DUT. Container is limited via cgroup to
| ... | use cores allocated from pool of isolated CPUs. There are no memory
| ... | contraints.
| ... | *[Ver] TG verification:* In MaxReceivedRate test TG sends traffic
| ... | at line rate and reports total received/sent packets over trial period.
| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
| ... | flow-group) with all packets containing Ethernet header, IPv4 header
| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
| ... | addresses of the TG node interfaces.

*** Variables ***
# X710-DA2 bandwidth limit
| ${s_limit}= | ${10000000000}
# Traffic profile:
| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-2c2n
# Container
| ${container_engine}= | Docker
| ${container_chain_topology}= | pipeline_ip4

*** Keywords ***
| Local Template
| | [Documentation]
| | ... | [Cfg] DUT runs L2BD switching config.
| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\
| | ... | trial throughput test.
| | ...
| | ... | *Arguments:*
| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1).
| | ... | Type: integer, string
| | ... | - phy_cores - Number of physical cores. Type: integer
| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
| | ...
| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None}
| | ...
| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
| | And Add PCI devices to all DUTs
| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg
| | ... | ${s_limit} | ${framesize}
| | And Apply startup configuration on all VPP DUTs
| | And Set up performance test with containers
| | ... | nf_chains=${2} | nf_nodes=${2} | auto_scale=${False}
| | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs
| | ... | nf_chains=${2} | nf_nodes=${2} | auto_scale=${False}
| | Then Traffic should pass with maximum rate
| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}

*** Test Cases ***
| tc01-64B-1c-eth-l2bd-4memif-2pipe-4dcr-vppip4-mrr
| | [Tags] | 64B | 1C
| | framesize=${64} | phy_cores=${1}

| tc02-64B-2c-eth-l2bd-4memif-2pipe-4dcr-vppip4-mrr
| | [Tags] | 64B | 2C
| | framesize=${64} | phy_cores=${2}

| tc03-64B-4c-eth-l2bd-4memif-2pipe-4dcr-vppip4-mrr
| | [Tags] | 64B | 4C
| | framesize=${64} | phy_cores=${4}

| tc04-1518B-1c-eth-l2bd-4memif-2pipe-4dcr-vppip4-mrr
| | [Tags] | 1518B | 1C
| | framesize=${1518} | phy_cores=${1}

| tc05-1518B-2c-eth-l2bd-4memif-2pipe-4dcr-vppip4-mrr
| | [Tags] | 1518B | 2C
| | framesize=${1518} | phy_cores=${2}

| tc06-1518B-4c-eth-l2bd-4memif-2pipe-4dcr-vppip4-mrr
| | [Tags] | 1518B | 4C
| | framesize=${1518} | phy_cores=${4}

| tc07-9000B-1c-eth-l2bd-4memif-2pipe-4dcr-vppip4-mrr
| | [Tags] | 9000B | 1C
| | framesize=${9000} | phy_cores=${1}

| tc08-9000B-2c-eth-l2bd-4memif-2pipe-4dcr-vppip4-mrr
| | [Tags] | 9000B | 2C
| | framesize=${9000} | phy_cores=${2}

| tc09-9000B-4c-eth-l2bd-4memif-2pipe-4dcr-vppip4-mrr
| | [Tags] | 9000B | 4C
| | framesize=${9000} | phy_cores=${4}

| tc10-IMIX-1c-eth-l2bd-4memif-2pipe-4dcr-vppip4-mrr
| | [Tags] | IMIX | 1C
| | framesize=IMIX_v4_1 | phy_cores=${1}

| tc11-IMIX-2c-eth-l2bd-4memif-2pipe-4dcr-vppip4-mrr
| | [Tags] | IMIX | 2C
| | framesize=IMIX_v4_1 | phy_cores=${2}

| tc12-IMIX-4c-eth-l2bd-4memif-2pipe-4dcr-vppip4-mrr
| | [Tags] | IMIX | 4C
| | framesize=IMIX_v4_1 | phy_cores=${4}
Age	Commit message (Expand)	Author	Files	Lines
2017-05-30	Flowprobe: Stateful flows and IPv6, L4 recording	Ole Troan	9	-2148/+0
2017-05-10	completelly deprecate os_get_cpu_number, replace new occurences	Damjan Marion	2	-20/+20
2017-04-25	"autoreply" flag: autogenerate standard xxx_reply_t messages	Dave Barach	1	-21/+2
2017-04-06	Use thread local storage for thread index	Damjan Marion	2	-2/+2
2017-03-22	vlib: add description field in plugin registration	Damjan Marion	1	-0/+1
2017-03-16	API:replaced all REPLY_MACRO's with api_helper_macros.h	Eyal Bari	1	-38/+3
2017-03-08	FLOWPERPKT: New API definition in preparation for stateful flows.	Ole Troan	1	-1/+18
2017-02-03	Plugin infrastructure improvements	Damjan Marion	1	-24/+8
2017-02-02	Refactor fragile msg macro W and W2 to not burry return control flow.	Jon Loeliger	1	-1/+3
2017-02-02	Localize the timeout variable within the W message macro.	Jon Loeliger	1	-1/+0
2017-02-02	Convert message macro S to accept a message pointer parameter;	Jon Loeliger	1	-1/+1
2017-02-02	Ensure all M() and M2() second parameters are the message pointer.	Jon Loeliger	1	-1/+1
2017-01-25	Repair plugin binary API message numbering	Dave Barach	1	-0/+2
2017-01-23	binary-api debug CLI works with plugins	Dave Barach	1	-41/+4
2017-01-14	vlib: add buffer and thread callbacks	Damjan Marion	1	-1/+1
2016-12-28	Reorganize source tree to use single autotools instance	Damjan Marion	9	-0/+2234