summaryrefslogtreecommitdiffstats
path: root/src/plugins/flowprobe
AgeCommit message (Collapse)AuthorFilesLines
2022-09-26api: replace print functions wth formatDamjan Marion1-7/+5
Type: improvement Change-Id: I7f7050c19453a69a7fb6c5e62f8f57db847d9144 Signed-off-by: Damjan Marion <damarion@cisco.com>
2022-05-16flowprobe: add api messages to obtain current stateAlexander Chernavin3-6/+383
Type: improvement With this change: - add dump/details messages to obtain interfaces for which IPFIX flow record generation is enabled; - add get message to obtain parameters; - add a new message to set parameters with validation present and to correspond with get/set naming; - add tests for get/set parameters and dump/details interfaces. Change-Id: I09f6ec990171ac8bcb9d2f5c92629803b8ab6c28 Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
2022-05-13flowprobe: add support for reporting on inbound packetsAlexander Chernavin7-91/+441
Type: feature Currently, the plugin supports only IPFIX flow record generation for outbound packets. With this change: - add a new API message for enabling the feature on an interface that accepts direction (rx, tx, both); - update existing debug command for feature enabling to accept direction; - update existing debug command for showing currently enabled feature on interfaces to display direction; - update templates to include a direction field; - generate flow records on the specified direction and data path; - report direction in flow data; - update tests to use the new API; - add tests for inbound flows. Change-Id: I121fd904b38408641036ebeea848df7a4e5e0b30 Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
2021-11-22ipfix-export: Change exp to use ip_addressPaul Atkins2-5/+6
Modify the ipfix_exporter to use ip_address instead of the ipv4 specific version. Modify the current code so that it writes into the v4 specific part of the address, i.e. we are not yet fully supporting IPv6. For the exporter configured via the original API (the one that is always in slot0) we will not support IPv6 addresses. Type: improvement Signed-off-by: Paul Atkins <patkins@graphiant.com> Change-Id: Ic9854ac62aaee76a7a55a958234c456fd9828c4c
2021-11-22ipfix-export: refactor params to the callback fnsPaul Atkins1-24/+13
When a new flow-report is created the caller provides 2 callback functions. These functions both take a pointer to the exporter, plus a pointer to the source and dest address. However the pointers to the address are not adding any value as these are always set to the src/dest addresses of the exporter (which is already being passed). Remove these parameters and leave the callback functions to get the addresses out of the exporter. Type: improvement Signed-off-by: Paul Atkins <patkins@graphiant.com> Change-Id: I36dec394f30e85cdca120dd8706b5d90f5e07c48
2021-11-22ipfix-export: pass an exp to flow_report_add_delPaul Atkins1-64/+51
Pass an ipfix_exporter to this function so that callers can choose which exporter they are modifying. Type: improvement Signed-off-by: Paul Atkins <patkins@graphiant.com> Change-Id: Ice0ed19a57baf15b1dc85cd27fe01913e36d7f4f
2021-11-22ipfix-export: refactor fields in flow_report_mainPaul Atkins2-17/+19
Pull out the fields in flow_report_main_t that are specific to a single exporter and move them into a new structure that represents an exporter. Add a pool of exporters to flow_report_main_t and do a pool_get() to get the entry at index 0, so that the existing users of the code need only change the path at which they access the old fields and have no need to make further code changes. In functions that were accessing the fields that now make up the ipfix_exporter create a local var that points to the first (always valid) exporter and use this as the base for the fields rather than finding them from flow_report_main. This is in preparation for supporting multiple flow_exporters. Note that at the moment the code supports multiple 'streams' for a given exporter, where each stream has its own source port, domain id and template space. But all streams within an exporter have the same destination address, so this is not the same as multiple exporters. Type: refactor Signed-off-by: Paul Atkins <patkins@graphiant.com> Change-Id: I49f5c7fb9e901773351d31dc8a59178c37e99301
2021-11-14flowprobe: right values in records from subinterfacesDaniel Béreš1-2/+14
Skip 802.1q headers due to correct EtherType, ip addresses, ports. Ticket: VPP-1997 Type: fix Change-Id: I1a552fa6abe5b1459dd7d2c5ac6ad0f62c51417c Signed-off-by: Daniel Béreš <daniel.beres@pantheon.tech>
2021-11-02flowprobe: missing headerDamjan Marion1-0/+1
Change-Id: I7a6df4317beed78e394dc4ba8edd350ca5b2bc80 Type: fix Signed-off-by: Damjan Marion <damarion@cisco.com>
2021-10-13docs: convert plugins doc md->rstNathan Skrzypczak2-13/+17
Type: improvement Change-Id: I7e821cce1feae229e1be4baeed249b9cca658135 Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
2021-07-15misc: replace CLIB_PREFETCH with clib_prefetch_{load,store}Damjan Marion1-2/+2
Type: refactor Change-Id: Id10cbf52e8f2dd809080a228d8fa282308be84ac Signed-off-by: Damjan Marion <damarion@cisco.com>
2021-05-13tests: move test source to vpp/testDave Wallace1-1094/+0
- Generate copyright year and version instead of using hard-coded data Type: refactor Signed-off-by: Dave Wallace <dwallacelf@gmail.com> Change-Id: I6058f5025323b3aa483f5df4a2c4371e27b5914e
2021-05-01vlib: refactor trajectory trace debug featureBenoît Ganne1-1/+0
trajectory trace has been broken for a while because we used to save the buffer trajectory in a vector pointed to in opaque2. This does not work well when opaque2 is copied (eg. because of a clone) as 2 buffers end up sharing the same vector. This dedicates a full cacheline in the buffer metadata instead when trajectory is compiled in. No dynamic allocation, no sharing, no tears. Type: refactor Change-Id: I6a028ca1b48d38f393a36979e5e452c2dd48ad3f Signed-off-by: Benoît Ganne <bganne@cisco.com>
2021-04-19interface: interface-output end node reworkDamjan Marion1-3/+2
- rename node to more meaningful name - introduce lookup tables - enable multiarch - quad-loop node - enqqueue to next instead of enqueueing to node Type: improvement Change-Id: Ibb208047ae04bb6cfe56db558d3b8938bc14b4fe Signed-off-by: Damjan Marion <damarion@cisco.com>
2021-03-26vlib: introduce vlib_get_main_by_index(), vlib_get_n_threads()Damjan Marion1-3/+3
Type: improvement Change-Id: If3da7d4338470912f37ff1794620418d928fb77f Signed-off-by: Damjan Marion <damarion@cisco.com>
2021-02-11tests: tag the tests that do not work with multi-worker configurationAndrew Yourtchenko1-0/+3
If the multi-worker default VPP configuration is triggered by setting VPP_WORKER_CONFIG="workers 2", some of the tests fail for various reasons. It's a substantial number, so this change marks all of the testsets that have this issue, such that they can be addressed later independently. Type: test Change-Id: I4f77196499edef3300afe7eabef9cbff91f794d3 Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2021-02-07flowprobe: set collector port for data from settingjan_cavojsky1-2/+2
Type: fix Ticket: VPP-1859 Signed-off-by: jan_cavojsky <Jan.Cavojsky@pantheon.tech> Change-Id: Iaa5045001621ec99dc8579e8e989adf81dc60525
2021-01-22tests: add generalized tags for tests, use them for run-solo testsAndrew Yourtchenko1-4/+2
We have accumulated several scenarios in prod or wishlists where it would be useful to have a general infra to say yes/no about a certain test, and potentially make decisions based on that, for example: - runs solo (aka 'time-dependent') - (wishlist) part of quick smoke-test set - (wishlist) intermittent failure unrelated to timing - (wishlist) test broken with a multi-worker config in vpp Refactor the current "run-solo" code to allow for this extension. Type: test Change-Id: Ia5b3810e57c0543753c8e0dc4dc0cfb4a30b36ac Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com> Signed-off-by: Klement Sekera <ksekera@cisco.com>
2020-12-14misc: move to new pool_foreach macrosDamjan Marion1-2/+2
Type: refactor Change-Id: Ie67dc579e88132ddb1ee4a34cb69f96920101772 Signed-off-by: Damjan Marion <damarion@cisco.com>
2020-11-25api: vat2 and json autogeneration for api messagesOle Troan2-19/+1
VAT2: A completely auto-generated replacement of VAT. Reads input message in JSON from stdin and outputs received messages in JSON. A VAT2 plugin is automatically built for a .api file. There no longer a need for a separate _test.c. Example: vat2 show_version {} { "_msgname": "show_version_reply", "retval": 0, "program": "vpe", "version": "21.01-rc0~411-gf6eb348a6", "build_date": "2020-11-19T09:49:25", "build_directory": "/vpp/autogen3" } vat2 sw_interface_dump '{"sw_if_index": -1, "name_filter_valid": 0, "name_filter": ""}' [{ "_msgname": "sw_interface_details", "sw_if_index": 0, "sup_sw_if_index": 0, "l2_address": "00:00:00:00:00:00", "flags": "Invalid ENUM", "type": "IF_API_TYPE_HARDWARE", "link_duplex": "LINK_DUPLEX_API_UNKNOWN", "link_speed": 0, "link_mtu": 0, "mtu": [0, 0, 0, 0], "sub_id": 0, "sub_number_of_tags": 0, "sub_outer_vlan_id": 0, "sub_inner_vlan_id": 0, "sub_if_flags": "Invalid ENUM", "vtr_op": 0, "vtr_push_dot1q": 0, "vtr_tag1": 0, "vtr_tag2": 0, "outer_tag": 0, "b_dmac": "00:00:00:00:00:00", "b_smac": "00:00:00:00:00:00", "b_vlanid": 0, "i_sid": 0, "interface_name": "local0", "interface_dev_type": "local", "tag": "" }] This is the first phase and vat2 is not integrated in packaging yet. Type: feature Signed-off-by: Ole Troan <ot@cisco.com> Change-Id: Ib45ddeafb180ea7da8c5dc274a9274d7a4edc876 Signed-off-by: Ole Troan <ot@cisco.com>
2020-10-21misc: minimize dependencies on udp.hFlorin Coras2-0/+2
Type: improvement Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: Id13f33843b230a1d169560742c4f7b2dc17d8718
2020-10-07misc: Purge unused pg includesNeale Ranns1-1/+0
Type: style Signed-off-by: Neale Ranns <nranns@cisco.com> Change-Id: I26a19e42076e031ec5399d5ca05cb49fd6fbe1cd
2020-09-16flowprobe: add show commands for params and list of interfaces for recordingjan_cavojsky1-0/+87
Type: feature Ticket: VPP-1861 Signed-off-by: jan_cavojsky <Jan.Cavojsky@pantheon.tech> Change-Id: Iaeff13b19a712257223a4e77893cfd9398c18327
2020-09-01ip: fix ip zero checksum verificationBenoît Ganne1-1/+1
In one's complement, there are two representations of zero: the all zero and the all one bit values, often referred to as +0 and -0. See RFC 1624 section 3 for more details. This used to be taken care of in ip4_header_checksum(), but it is no longer the case. The check ip->checksum == ip4_header_checksum (ip) is no longer correct in the -0 case. Always use ip4_header_checksum_is_valid() instead (which behaves correctly since 9a79a1ab931c3b5a7ae07d6f0fcfef7c4368a2c4). Type: fix Fixes: e5f0050c7a5d411f96af6401797529d58825e2af Change-Id: Iacc6b60645a834287b085aecb9e3fdb4554cf0cf Signed-off-by: Benoît Ganne <bganne@cisco.com>
2020-08-27tests: "force solo" testcase supportAndrew Yourtchenko1-0/+4
Some of the tests are time-sensitive, and at present require a non-trivial modification in order to run at high concurrency. Without these modifications, they intermittently fail, and require the test retries. Rather than setting them to the extended tests and forgetting about them, put them into a "solo" set, which gets run in a single-threaded mode after the rest of the tests are done. Mark a few of the tests that showed errors during TEST_JOBS=48 as forced-solo. Also, give a better diagnostic if the testcase misses a docstring needed to represent it in the diagnostic outputs. Type: fix Change-Id: I33fe62eb17edc1885bd2c3523892051d52da6546 Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2020-05-06docs: clean up make docs jobPaul Vinciguerra1-1/+2
Type: docs Change-Id: I9b5e5137eb4c1e89f6e8d7a278cd11a0fd496471 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-12-10flowprobe: use explicit types in apiOle Troan4-25/+44
Type: fix Signed-off-by: Ole Troan <ot@cisco.com> Change-Id: I4f1cccca7de0c07cee472bde80cd6b0ef60046bd
2019-11-08tests: python3 use byte strings in raw()Ole Troan1-1/+1
Raw('\xaf) and Raw(b'\xaf) are two quite different things in python 2 versus 3. In most cases this didn't make a difference, apart from those cases where length of payload actually mattered. Type: fix Signed-off-by: Ole Troan <ot@cisco.com> Change-Id: I3cba5c1486e436a3ca8aa10a7b393da75aa9f6b9
2019-11-06build: add yaml file linting to make checkstylePaul Vinciguerra1-3/+4
Type: feature fts and trex rely on yaml config files. Verify that they are valid, so comitters can catch errors early. Change-Id: Ide0bb276659119c59bdbbc8b8155e37562a648b8 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-11-05misc: Fix python scripts shebang lineRenato Botelho do Couto1-1/+1
Type: fix Since CentOS 8, RPM build script doesn't accept '#!/usr/bin/env python' as a valid shebang line. It requires scripts to explicitly chose between python2 or python3. Change all to use python3 as suggested by Paul Vinciguerra. Depends-On: https://gerrit.fd.io/r/23170 Signed-off-by: Renato Botelho do Couto <renato@netgate.com> Change-Id: Ie72af9f60fd0609e07f05b70f8d96e738b2754d1
2019-10-22ip: ipfix-export API updateJakub Grajciar1-2/+2
Use consistent API types. Type: fix Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com> Change-Id: I5b03e5de111c3a3b8da4e9f02cba0aa99e3ee9f3
2019-10-22flowprobe: tests support python3Ole Troan1-12/+8
Type: fix Signed-off-by: Ole Troan <ot@cisco.com> Change-Id: I7425147e864467e4f94cee2a82ef74a894339471
2019-09-25api: split api generated filesOle Troan6-214/+11
Split generation of API message enum and the typedefs into separate files, so that the type file can be included from elsewhere. Generate a C file for VPP that contains the API registration, this was previously done via X macros by the C pre- processor. This allows deleting lots of skeleton/copy paste code for each feature. plugins/flowprobe plugins/map examples/sample-plugin vnet/ipip used as Guinea pigs. Generate a C Test file for VAT, that does the same for VAT plugins. Also add support for a per-message CLI option, that is currently limited to VAT help text. option vat_help = "<help text>"; Type: refactor Change-Id: I245e3104bb76f7e1fb69a59ab20cc7c8dfcdd460 Signed-off-by: Ole Troan <ot@cisco.com>
2019-08-22tests: move plugin tests to src/plugins/*/testDave Wallace1-0/+1082
- Relocate plugin tests for 'make test' into src/plugins/*/test so that plugin test cases are co-located with the plugin source code. Type: refactor Signed-off-by: Dave Wallace <dwallacelf@gmail.com> Change-Id: I503e6a43528e14981799b735fa65674155713f67 Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2019-07-09vat: unload unused vat pluginsDave Barach1-21/+2
If the corresponding vpp plugin is absent, return a non-zero clib_error_t * from vat_plugin_register ("xxx plugin not loaded"). The vat plugin calls dlclose on the vat plugin, and it disappears. Depending on the plugin configuration, this can reduce the vpp virtual size by several gigabytes. Added a VAT_PLUGIN(<plugin-name>) macro to vat_helper_macros, clean up boilerplate vat_plugin_register() implementations. Fixed a number of non-standard vat_plugin_register methods. Type: refactor Change-Id: Iac908e5af7d5497c78d6aa9c3c51cdae08374045 Signed-off-by: Dave Barach <dave@barachs.net>
2019-06-07build: add -Wall and -fno-common, fix reported issuesBenoît Ganne2-1/+1
Type: refactor Change-Id: I8489ccd54411c2aa9355439c5641dc31012c64a2 Signed-off-by: Benoît Ganne <bganne@cisco.com> Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-05-31tools: FEATURE.yaml meta-data infrastructureOle Troan1-0/+13
Add tooling for feature metadata configuration files. The main tool is in src/scripts/fts.py make checkfeaturelist to validate against schema. make featurelist to dump all feature lists to stdout. Example feature definition: name: IP in IP tunnelling maintainer: Ole Troan <ot@cisco.com> features: - IPv4/IPv6 over IPv4/IPv6 encapsulation: - Fragmentation and Reassembly - Configurable MTU - Inner to outer Traffic Class / TOS copy - Configurable Traffic Class / TOS - ICMPv4 / ICMPv6 proxying - 6RD (RFC5969): - Border Relay description: "Implements IP{v4,v6} over IP{v4,v6} tunnelling as described in RFC2473. This module also implement the border relay of 6RD (RFC5969)." state: production properties: [API, CLI, STATS, MULTITHREAD] missing: - Tunnel PMTUD - Tracking of FIB state for tunnel state - IPv6 extension headers (Tunnel encapsulation limit option) JSON schema is embedded in fts.py Example markdown: https://github.com/otroan/scratch/blob/master/features.md Change-Id: I903b4ee6b316a9378c259e86dc937092e5d4b7da Type: make Signed-off-by: Ole Troan <ot@cisco.com>
2019-01-20buffers: don't init metadata, as it is already initializedDamjan Marion1-4/+0
Change-Id: Ia083050389853c25b069f0f8286d50d3f4aef527 Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-01-02Fixes for buliding for 32bit targets:David Johnson1-1/+1
* u32/u64/uword mismatches * pointer-to-int fixes * printf formatting issues * issues with incorrect "ULL" and related suffixes * structure alignment and padding issues Change-Id: I70b989007758755fe8211c074f651150680f60b4 Signed-off-by: David Johnson <davijoh3@cisco.com>
2018-11-14Remove c-11 memcpy checks from perf-critical codeDave Barach1-27/+27
Change-Id: Id4f37f5d4a03160572954a416efa1ef9b3d79ad1 Signed-off-by: Dave Barach <dave@barachs.net>
2018-10-23c11 safe string handling supportDave Barach1-3/+3
Change-Id: Ied34720ca5a6e6e717eea4e86003e854031b6eab Signed-off-by: Dave Barach <dave@barachs.net>
2018-08-27cmake: Fix plugins .h includesMohsin Kazmi1-0/+4
Change-Id: I90600d000afb02e8969f3c01bcf9e4b5c10a7d39 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2018-08-25cmake: handle api_test_plugins in add_vpp_plugin macroDamjan Marion1-3/+1
Change-Id: I76a1711af0a920cce66e6dfb07d019ba505d55b7 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-08-25cmake: improve add_vpp_plugin macroDamjan Marion1-3/+6
Change-Id: Iffd5c45ab242a919592a1f686f7f880936b68a1a Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-08-17CMake as an alternative to autotools (experimental)Damjan Marion1-0/+24
Change-Id: Ibc59323e849810531dd0963e85493efad3b86857 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-07-19Remove unused argument to vlib_feature_nextDamjan Marion1-6/+3
Change-Id: Ieb8b53977fc8484c19780941e232ee072b667de3 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-05-13Improve ipfix template packet rewrite constructionDave Barach1-5/+15
Instead of repeatedly cutting, pasting, and hacking to create a new callback, use vnet_flow_rewrite_generic_callback(). Add three arguments to the flow rewrite callback: (in) pointer to an array of report elements, (in) length of array, (out) pointer to the stream index Change existing code prototypes. Code owners encouraged to evaluate whether they can use the generic callback or not, at leisure. /* ipfix field definitions for a particular report */ typedef struct { u32 info_element; u32 size; } ipfix_report_element_t; Best generated like so: _(sourceIPv4Address, 4) \ _(destinationIPv4Address, 4) \ _(sourceTransportPort, 2) \ _(destinationTransportPort, 2) \ _(protocolIdentifier, 1) \ _(flowStartMicroseconds, 8) \ _(flowEndMicroseconds, 8) static ipfix_report_element_t simple_report_elements[] = { foreach_simple_report_ipfix_element }; ... /* Set up the ipfix report */ memset (&a, 0, sizeof (a)); a.is_add = 1 /* to enable the report */ ; a.domain_id = 1 /* pick a domain ID */ ; a.src_port = UDP_DST_PORT_ipfix /* src port for reports */ ; a.rewrite_callback = vnet_flow_rewrite_generic_callback; a.report_elements = simple_report_elements; a.n_report_elements = ARRAY_LEN (simple_report_elements); a.stream_indexp = &jim->stream_index; a.flow_data_callback = simple_flow_data_callback; /* Create the report */ rv = vnet_flow_report_add_del (frm, &a, &template_id); if (rv) return rv; ... Change-Id: If6131e6821d3a37a29269c0d58040cdf18ff05e4 Signed-off-by: Dave Barach <dave@barachs.net>
2018-05-04Flow: Rename IPFIX exporter.Ole Troan1-2/+2
Change-Id: I9363cf54b73f7cfd8622af6f1cb250438ea0d3b6 Signed-off-by: Ole Troan <ot@cisco.com>
2018-02-07Refactor vlib_buffer flagsDamjan Marion1-4/+5
Change-Id: I853386aebfe488ebb10328435b81b6e3403c5dd0 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-01-23VPPAPIGEN: vppapigen replacement in Python PLY.Ole Troan1-1/+1
This is a version of the VPP API generator in Python PLY. It supports the existing language, and has a plugin architecture for generators. Currently C and JSON are supported. Changes: - vl_api_version to option version = "major.minor.patch" - enum support - Added error checking and reporting - import support (removed the C pre-processor) - services (tying request/reply together) Version: option version = "1.0.0"; Enum: enum colours { RED, BLUE = 50, }; define foo { vl_api_colours_t colours; }; Services: service { rpc foo returns foo_reply; rpc foo_dump returns stream foo_details; rpc want_stats returns want_stats_reply events ip4_counters, ip6_counters; }; Future planned features: - unions - bool, text - array support (including length) - proto3 output plugin - Refactor C/C++ generator as a plugin - Refactor Java generator as a plugin Change-Id: Ifa289966c790e1b1a8e2938a91e69331e3a58bdf Signed-off-by: Ole Troan <ot@cisco.com>