aboutsummaryrefslogtreecommitdiffstats
path: root/src/plugins/gtpu/gtpu.c
AgeCommit message (Collapse)AuthorFilesLines
2021-10-21fib: respect mfib entry flags on create with pathsPaul Atkins1-5/+6
When an mfib entry was created with both paths and entry_flags then the entry flags were being ignored. If there are no paths then the flags were passed into mfib_table_entry_update, but in the case where the entry didn't exist and there were paths and flags, the entry was created within mfib_table_entry_paths_update() which used a default of MFIB_ENTRY_FLAG_NONE. Pass the flags through into the mfib_table_entry_paths_update fn. All existing callers other than the create case will now pass in MFIB_ENTRY_FLAG_NONE. Type: fix Signed-off-by: Paul Atkins <patkins@graphiant.com> Change-Id: I256375ba2fa863a62a88474ce1ea6bf2accdd456
2021-10-04docs: plugin comment nitfixesNathan Skrzypczak1-7/+10
Type: improvement Change-Id: Ib7e2f5f314144064de7b6be0fade3db2f9c943fe Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
2020-12-14misc: move to new pool_foreach macrosDamjan Marion1-6/+4
Type: refactor Change-Id: Ie67dc579e88132ddb1ee4a34cb69f96920101772 Signed-off-by: Damjan Marion <damarion@cisco.com>
2020-08-31flow: code refactorChenmin Sun1-1/+1
This is the code refactor for vnet/flow infra and the dpdk_plugin flow implementation. The main works of the refactor are: 1. Added two base flow type: VNET_FLOW_TYPE_IP4 and VNET_FLOW_TYPE_IP6 as the base the flow type 2. All the other flows are derived from the base flow types 3. Removed some flow types that are not currently supported by the hardware, and VPP won't leverage them either: IP4_GTPU_IP4, IP4_GTPU_IP6, IP6_GTPC, IP6_GTPU, IP6_GTPU_IP4, IP6_GTPU_IP6 4. Re-implemented the vnet/flow cli as well as the dpdk_plugin implementation 5. refine cli prompt 6. refine display info in command "show flow entry" Type: refactor Signed-off-by: Chenmin Sun <chenmin.sun@intel.com> Change-Id: Ica5e61c5881adc73b28335fd83e36ec1cb420c96
2020-06-16gtpu: support separate rx-decap and encap-tx teid valuesJohn Lo1-32/+63
Support separate local and remote TEIDs, with local (or RX) one used for GTPU tunnel RX/decap and remote (or TX) one used encap/TX. Updated current gtpu API to support seperate RX/TX TEIDs and added new gtpu_tunnel_update_tteid API to allow changing TX-TEID of an existing GTPU tunnel. The current tunnel field "teid" is used for RX-TEID and a new field "tteid" is used for TX-TEID. Type: improvement Signed-off-by: John Lo <loj@cisco.com> Change-Id: I549d79750a34bb965036da298c0ca894d15c2c20
2020-05-05gtpu: RX offload for IPv6 payload supportingChenmin Sun1-4/+5
this patch adds the offloading capability for the IPv4 GTPU tunnel which the next-node is assigned as IPv6 Type: feature Signed-off-by: Chenmin Sun <chenmin.sun@intel.com> Change-Id: Ie39cd43058d36514656351dc6e906a19d5de89c0
2020-03-21gtpu: encap-vrf-id in show gtpu tunnels commandNick Zavaritsky1-2/+9
Show encap-vrf-id instead of fib-idx. When a tunnel is created, you specify encap-vrf-id, hence it makes sense for the show command to present it the same way. Fib index, on the other hand, is the internal artifact of how IP tables are managed; showing it isn't helpful. Type: improvement Change-Id: I8d1713d6727dd8685d6c10c07f421c18edafa6e0 Signed-off-by: Nick Zavaritsky <nick.zavaritsky@emnify.com>
2020-03-03geneve gtpu vxlan vxlan-gpe: VRF-aware bypass nodeNick Zavaritsky1-34/+7
Bypass node MUST NOT intercept a packet if destination IP doesn’t match a local address. However IP address interpretation depends on the VRF, hence bypass node must take that into account. This patch also factors-out common VTEP management and checking code. Type: improvement Signed-off-by: Nick Zavaritsky <nick.zavaritsky@emnify.com> Change-Id: I5665d94882bbf45d15f8da140c7ada528ec7fa94
2020-02-18misc: fix coverity warningsDave Barach1-1/+1
Type: fix Ticket: VPP-1837 Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: I402b1b06db736b2a7a242ce70ffd409c7c0a4fc2
2020-02-17misc: fix coverity warningsDave Barach1-1/+1
Add an ALWAYS_ASSERT (...) macro, to (a) shut up coverity, and (b) check the indicated condition in production images. As in: p = hash_get(...); ALWAYS_ASSERT(p) /* was ASSERT(p) */ elt = pool_elt_at_index(pool, p[0]); This may not be the best way to handle a specific case, but failure to check return values at all followed by e.g. a pointer dereference isn't ok. Type: fix Ticket: VPP-1837 Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: Ia97c641cefcfb7ea7d77ea5a55ed4afea0345acb
2020-02-17gtpu: offload RX flowChenmin Sun1-1/+139
ip4 gtpu cli/api (using flow infra) to create flows and enable them on different hardware (currently tested with ice) to offload a gtpu tunnel onto hw: set flow-offload gtpu hw TwentyFiveGigabitEthernet3/0/0 rx gtpu_tunnel0 to remove offload: set flow-offload gtpu hw TwentyFiveGigabitEthernet3/0/0 rx gtpu_tunnel0 del TODO:ipv6 handling Type: feature Signed-off-by: Chenmin Sun <chenmin.sun@intel.com> Change-Id: I8e356feeb0b16cfeadc1bbbe92f773aa2916e715
2019-12-19gtpu: Track the dst FIB entry instead of RR sourcing thatMiklos Tirpak1-9/+9
RR sourcing the destination FIB entry limits the number of tunnels to 255 for a particular destination. This change removes this limit. Type: fix The patch is based on 1f50bf8fc57ebf78f9056185a342493be460a847 that introduced the FIB entry tracking but did not update the gtpu plugin. Signed-off-by: Miklos Tirpak <miklos.tirpak@gmail.com> Change-Id: I8a4a87382a6eb5120e2bb65b9bc3c446bbfdbd3b
2019-12-17vxlan geneve gtpu: fix short helpPaul Vinciguerra1-1/+1
Type: fix Change-Id: Id53eb6ed15f270d747b9831a7b585cbafe515dd2 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-12-09gtpu: use explicit types in apiOle Troan1-2/+1
Type: fix Signed-off-by: Ole Troan <ot@cisco.com> Change-Id: I16fcbd5e63526dbf062a3032701479324fe2a4f5
2019-06-18fib: fib api updatesNeale Ranns1-7/+5
Enhance the route add/del APIs to take a set of paths rather than just one. Most unicast routing protocols calcualte all the available paths in one run of the algorithm so updating all the paths at once is beneficial for the client. two knobs control the behaviour: is_multipath - if set the the set of paths passed will be added to those that already exist, otherwise the set will replace them. is_add - add or remove the set is_add=0, is_multipath=1 and an empty set, results in deleting the route. It is also considerably faster to add multiple paths at once, than one at a time: vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.11 100000 routes in .572240 secs, 174751.80 routes/sec vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.12 100000 routes in .528383 secs, 189256.54 routes/sec vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.13 100000 routes in .757131 secs, 132077.52 routes/sec vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.14 100000 routes in .878317 secs, 113854.12 routes/sec vat# ip_route_add_del 1.1.1.1/32 count 100000 multipath via 10.10.10.11 via 10.10.10.12 via 10.10.10.13 via 10.10.10.14 100000 routes in .900212 secs, 111084.93 routes/sec Change-Id: I416b93f7684745099c1adb0b33edac58c9339c1a Signed-off-by: Neale Ranns <neale.ranns@cisco.com> Signed-off-by: Ole Troan <ot@cisco.com> Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-05-22gtpu: don't register udp ports unless a tunnel is createdJakub Grajciar1-5/+11
Change-Id: I2945c2a2062ee5eda78f783c55cf16c2d60f959c Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
2019-05-03plugins: clean up plugin descriptionsDave Wallace1-1/+1
- Make plugin descriptions more consistent so the output of "show plugin" can be used in the wiki. Change-Id: I4c6feb11e7dcc5a4cf0848eed37f1d3b035c7dda Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2019-03-01gtpu: migrate old MULTIARCH macros to VLIB_NODE_FNFilip Tehlar1-0/+12
Change-Id: Id6e82910f8d991e355d3f26222eea4ac3ab091b1 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2018-10-23c11 safe string handling supportDave Barach1-4/+4
Change-Id: Ied34720ca5a6e6e717eea4e86003e854031b6eab Signed-off-by: Dave Barach <dave@barachs.net>
2018-09-25L2 BD: introduce a BD interface on which to send UU packetsNeale Ranns1-2/+2
Change-Id: I21ad6b04c19c8735d057174b1f260a59f2812241 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-09-24Trivial: Clean up some typos.Paul Vinciguerra1-4/+4
Change-Id: I085615fde1f966490f30ed5d32017b8b088cfd59 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2018-02-01FIB: Consolidate several copies of fib_ip_proto() into one.Jon Loeliger1-6/+0
Rather than having multiple copies of the same function scattered around, promote the function into the FIB PROTOCOL definitions in fib_types.h. Change-Id: I11c4d85931167d3a5f3dc1278afecc8845b23cd7 Signed-off-by: Jon Loeliger <jdl@netgate.com>
2018-01-24Improve tunnel interface creation performanceJohn Lo1-14/+5
Modify interface creation to allow creation of tunnel interfaces without dedicated per tunnel output and tx nodes which are not used for most tunnel types. Also changed interface-output node function vnet_per_buffer_interface_output() so it does not rely on hw_if_index as the next node index which is not flexible nor efficient for large scale tunnel interfaces. The improvenemts are done for VXLAN, VXLAN-GPE, GENEVE and GTPU tunnels. GRE tunnel is still using per tunnel output nodes which will be changed in a separate patch with other GRE enhencements. Change-Id: I4123c01c0d2ead814417a867adb8c8a407e4df55 Signed-off-by: John Lo <loj@cisco.com>
2018-01-13Improve "show xxx tunnel" and "show int addr" outputJohn Lo1-7/+7
Improve "show xxx tunnel" output functions format_xxx_tunnel() for GRE, VXLAN, VXLAN-GPE, GENEVE and GTPU tunnels to make their output more consistent and provide better information. Improved the output of "show int addr" to make its info more consistent with tunnels and provide fib-index info. Change-Id: Icd4b5b85a5bec417f8ee19afea336c770ad3b4c5 Signed-off-by: John Lo <loj@cisco.com>
2018-01-05Unify and cleanup usage of hash_set/unset_mem by various tunnelsJohn Lo1-26/+7
Move the functions hash_set_key_copy() and hash_unset_key_free() which are dupilicated in various tunnel support code modules to hash.h as hash_set_mem_alloc() and hash_unset_mem_free() to be used by all. Change-Id: I40723cabe29072ab7feb1804c221f28606d8e4fe Signed-off-by: John Lo <loj@cisco.com>
2017-11-03Set up P2P flag to gtpu interfaceHongjun Ni1-0/+1
Change-Id: Id01a363bf2b574376651de7bc8f3f7b2bb58c615 Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>
2017-08-08L2 over MPLSNeale Ranns1-1/+1
[support for VPWS/VPLS] - switch to using dpo_proto_t rather than fib_protocol_t in fib_paths so that we can describe L2 paths - VLIB nodes to handle pop/push of MPLS labels to L2 Change-Id: Id050d06a11fd2c9c1c81ce5a0654e6c5ae6afa6e Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-08-03gtpu bypass function doesn't work (VPP-924)jerryian1-0/+14
Change-Id: I80183f7d984ed6ed2e3405d1bb65fe761a29bc81 Signed-off-by: jerryian <gu.jian1@zte.com.cn>
2017-06-02Add l3 routing for GTP-U decapHongjun Ni1-2/+11
Change-Id: Ic3c8cd58cb2b02622299cf74c9efcabd2ef2b513 Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>
2017-05-15Add GTP-U plugin. VPP-694Hongjun Ni1-0/+1128
Basic GTP-U feature Change-Id: I31226f890a92c5303ac06e112ed7820cae52d9bd Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>