summaryrefslogtreecommitdiffstats
path: root/src/plugins/gtpu
AgeCommit message (Collapse)AuthorFilesLines
2020-08-31flow: code refactorChenmin Sun1-1/+1
This is the code refactor for vnet/flow infra and the dpdk_plugin flow implementation. The main works of the refactor are: 1. Added two base flow type: VNET_FLOW_TYPE_IP4 and VNET_FLOW_TYPE_IP6 as the base the flow type 2. All the other flows are derived from the base flow types 3. Removed some flow types that are not currently supported by the hardware, and VPP won't leverage them either: IP4_GTPU_IP4, IP4_GTPU_IP6, IP6_GTPC, IP6_GTPU, IP6_GTPU_IP4, IP6_GTPU_IP6 4. Re-implemented the vnet/flow cli as well as the dpdk_plugin implementation 5. refine cli prompt 6. refine display info in command "show flow entry" Type: refactor Signed-off-by: Chenmin Sun <chenmin.sun@intel.com> Change-Id: Ica5e61c5881adc73b28335fd83e36ec1cb420c96
2020-06-16gtpu: support separate rx-decap and encap-tx teid valuesJohn Lo6-76/+232
Support separate local and remote TEIDs, with local (or RX) one used for GTPU tunnel RX/decap and remote (or TX) one used encap/TX. Updated current gtpu API to support seperate RX/TX TEIDs and added new gtpu_tunnel_update_tteid API to allow changing TX-TEID of an existing GTPU tunnel. The current tunnel field "teid" is used for RX-TEID and a new field "tteid" is used for TX-TEID. Type: improvement Signed-off-by: John Lo <loj@cisco.com> Change-Id: I549d79750a34bb965036da298c0ca894d15c2c20
2020-05-09gtpu: fix coverity issueChenmin Sun1-2/+2
Fix coverity issue #210194 in gtpu-decap Type: fix Signed-off-by: Chenmin Sun <chenmin.sun@intel.com> Change-Id: I5b172c8494527e7117c4e7e7083a8473165aa40f
2020-05-05gtpu: RX offload for IPv6 payload supportingChenmin Sun3-8/+38
this patch adds the offloading capability for the IPv4 GTPU tunnel which the next-node is assigned as IPv6 Type: feature Signed-off-by: Chenmin Sun <chenmin.sun@intel.com> Change-Id: Ie39cd43058d36514656351dc6e906a19d5de89c0
2020-05-03tests: vpp_interface remove deprecated packed propertiesPaul Vinciguerra1-6/+5
The api no longer requires packed ip addresses. Type: test Change-Id: If67365d86b7c3189f871a58234e99f9c8f875371 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2020-04-10geneve: Fix the byte swapping for the VNINeale Ranns1-2/+3
Type: fix - swipe away the vomit indent left last time. - add tests for VNIs > 16bit Change-Id: I2d1f591bfb9d7a18996c38969365a509168d4193 Signed-off-by: Neale Ranns <nranns@cisco.com>
2020-04-08udp: cleanup input nodeFlorin Coras1-2/+2
Type: refactor Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: Ida9daefc20a161b36d6f36c56267123c7f2efc01
2020-03-21gtpu: encap-vrf-id in show gtpu tunnels commandNick Zavaritsky1-2/+9
Show encap-vrf-id instead of fib-idx. When a tunnel is created, you specify encap-vrf-id, hence it makes sense for the show command to present it the same way. Fib index, on the other hand, is the internal artifact of how IP tables are managed; showing it isn't helpful. Type: improvement Change-Id: I8d1713d6727dd8685d6c10c07f421c18edafa6e0 Signed-off-by: Nick Zavaritsky <nick.zavaritsky@emnify.com>
2020-03-03geneve gtpu vxlan vxlan-gpe: VRF-aware bypass nodeNick Zavaritsky3-90/+30
Bypass node MUST NOT intercept a packet if destination IP doesn’t match a local address. However IP address interpretation depends on the VRF, hence bypass node must take that into account. This patch also factors-out common VTEP management and checking code. Type: improvement Signed-off-by: Nick Zavaritsky <nick.zavaritsky@emnify.com> Change-Id: I5665d94882bbf45d15f8da140c7ada528ec7fa94
2020-02-18misc: fix coverity warningsDave Barach1-1/+1
Type: fix Ticket: VPP-1837 Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: I402b1b06db736b2a7a242ce70ffd409c7c0a4fc2
2020-02-17misc: fix coverity warningsDave Barach1-1/+1
Add an ALWAYS_ASSERT (...) macro, to (a) shut up coverity, and (b) check the indicated condition in production images. As in: p = hash_get(...); ALWAYS_ASSERT(p) /* was ASSERT(p) */ elt = pool_elt_at_index(pool, p[0]); This may not be the best way to handle a specific case, but failure to check return values at all followed by e.g. a pointer dereference isn't ok. Type: fix Ticket: VPP-1837 Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: Ia97c641cefcfb7ea7d77ea5a55ed4afea0345acb
2020-02-17gtpu: offload RX flowChenmin Sun6-2/+785
ip4 gtpu cli/api (using flow infra) to create flows and enable them on different hardware (currently tested with ice) to offload a gtpu tunnel onto hw: set flow-offload gtpu hw TwentyFiveGigabitEthernet3/0/0 rx gtpu_tunnel0 to remove offload: set flow-offload gtpu hw TwentyFiveGigabitEthernet3/0/0 rx gtpu_tunnel0 del TODO:ipv6 handling Type: feature Signed-off-by: Chenmin Sun <chenmin.sun@intel.com> Change-Id: I8e356feeb0b16cfeadc1bbbe92f773aa2916e715
2020-01-10docs: Edit FEATURE.yaml files so they can be publishedJohn DeNisco1-2/+2
Type: docs Signed-off-by: John DeNisco <jdenisco@cisco.com> Change-Id: I7280e5c5ad10a66c0787a5282291a2ef000bff5f
2020-01-06lb: add FEATURE file for lb/pppoe/gtpu/vxlan-gpe/pppoeHongjun Ni1-0/+10
Type: docs Change-Id: Ia3949954423eb7691c02e99444767a9f01a14adf Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>
2019-12-20vxlan: reuse inner packet flow hash for tunnel outer header load balanceShawn Ji1-0/+9
Type: fix Several tunnels encapsulation use udp as outer header and udp src port is set by inner header flow hash, such as gtpu, geneve, vxlan, vxlan-gbd Since flow hash of inner header is already been calculated, keeping it to vnet_buffere[b]->ip.flow_hash should save load-balance node work to select ECMP uplinks. Change-Id: I0e4e2b27178f4fcc5785e221d6d1f3e8747d0d59 Signed-off-by: Shawn Ji <xiaji@tethrnet.com>
2019-12-19gtpu: Track the dst FIB entry instead of RR sourcing thatMiklos Tirpak1-9/+9
RR sourcing the destination FIB entry limits the number of tunnels to 255 for a particular destination. This change removes this limit. Type: fix The patch is based on 1f50bf8fc57ebf78f9056185a342493be460a847 that introduced the FIB entry tracking but did not update the gtpu plugin. Signed-off-by: Miklos Tirpak <miklos.tirpak@gmail.com> Change-Id: I8a4a87382a6eb5120e2bb65b9bc3c446bbfdbd3b
2019-12-17vxlan geneve gtpu: fix short helpPaul Vinciguerra1-1/+1
Type: fix Change-Id: Id53eb6ed15f270d747b9831a7b585cbafe515dd2 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-12-14tests: changes for scapy 2.4.3 migrationsnaramre1-1/+2
Type: fix Change-Id: I7e041b666dabd90df23a920a1f1d99db4c10ddfe Signed-off-by: snaramre <snaramre@cisco.com>
2019-12-09gtpu: use explicit types in apiOle Troan6-78/+83
Type: fix Signed-off-by: Ole Troan <ot@cisco.com> Change-Id: I16fcbd5e63526dbf062a3032701479324fe2a4f5
2019-11-13gtpu: check packet has enough data for gtpu headerBenoît Ganne2-106/+60
Type: fix Change-Id: I604e4dd2b29962bfcd8e950a0074637dab53c79e Signed-off-by: Benoît Ganne <bganne@cisco.com>
2019-11-05misc: Fix python scripts shebang lineRenato Botelho do Couto1-1/+1
Type: fix Since CentOS 8, RPM build script doesn't accept '#!/usr/bin/env python' as a valid shebang line. It requires scripts to explicitly chose between python2 or python3. Change all to use python3 as suggested by Paul Vinciguerra. Depends-On: https://gerrit.fd.io/r/23170 Signed-off-by: Renato Botelho do Couto <renato@netgate.com> Change-Id: Ie72af9f60fd0609e07f05b70f8d96e738b2754d1
2019-10-23gtpu: msg id fix in send_gtpu_tunnel_details apiMiklos Tirpak1-1/+2
Type: fix _vl_msg_id must start at msg_id_base. Signed-off-by: Miklos Tirpak <miklos.tirpak@gmail.com> Change-Id: Id3f05683c873fcac47667a9736e45e85849b740c
2019-09-27gtpu: remove api boilerplateOle Troan6-232/+11
Type: refactor Change-Id: I08d200fbec805af3109e738eee32c3ecfd61c7cc Signed-off-by: Ole Troan <ot@cisco.com>
2019-08-22tests: move plugin tests to src/plugins/*/testDave Wallace1-0/+393
- Relocate plugin tests for 'make test' into src/plugins/*/test so that plugin test cases are co-located with the plugin source code. Type: refactor Signed-off-by: Dave Wallace <dwallacelf@gmail.com> Change-Id: I503e6a43528e14981799b735fa65674155713f67 Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2019-07-22gtpu: fix missing trace issueZhiyong Yang1-0/+16
Type: fix Change-Id: I1e1c39452edd94712455d102a6faad58bc7f66ff Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
2019-07-09vat: unload unused vat pluginsDave Barach1-20/+2
If the corresponding vpp plugin is absent, return a non-zero clib_error_t * from vat_plugin_register ("xxx plugin not loaded"). The vat plugin calls dlclose on the vat plugin, and it disappears. Depending on the plugin configuration, this can reduce the vpp virtual size by several gigabytes. Added a VAT_PLUGIN(<plugin-name>) macro to vat_helper_macros, clean up boilerplate vat_plugin_register() implementations. Fixed a number of non-standard vat_plugin_register methods. Type: refactor Change-Id: Iac908e5af7d5497c78d6aa9c3c51cdae08374045 Signed-off-by: Dave Barach <dave@barachs.net>
2019-06-18fib: fib api updatesNeale Ranns1-7/+5
Enhance the route add/del APIs to take a set of paths rather than just one. Most unicast routing protocols calcualte all the available paths in one run of the algorithm so updating all the paths at once is beneficial for the client. two knobs control the behaviour: is_multipath - if set the the set of paths passed will be added to those that already exist, otherwise the set will replace them. is_add - add or remove the set is_add=0, is_multipath=1 and an empty set, results in deleting the route. It is also considerably faster to add multiple paths at once, than one at a time: vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.11 100000 routes in .572240 secs, 174751.80 routes/sec vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.12 100000 routes in .528383 secs, 189256.54 routes/sec vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.13 100000 routes in .757131 secs, 132077.52 routes/sec vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.14 100000 routes in .878317 secs, 113854.12 routes/sec vat# ip_route_add_del 1.1.1.1/32 count 100000 multipath via 10.10.10.11 via 10.10.10.12 via 10.10.10.13 via 10.10.10.14 100000 routes in .900212 secs, 111084.93 routes/sec Change-Id: I416b93f7684745099c1adb0b33edac58c9339c1a Signed-off-by: Neale Ranns <neale.ranns@cisco.com> Signed-off-by: Ole Troan <ot@cisco.com> Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-05-22gtpu: don't register udp ports unless a tunnel is createdJakub Grajciar1-5/+11
Change-Id: I2945c2a2062ee5eda78f783c55cf16c2d60f959c Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
2019-05-03plugins: clean up plugin descriptionsDave Wallace1-1/+1
- Make plugin descriptions more consistent so the output of "show plugin" can be used in the wiki. Change-Id: I4c6feb11e7dcc5a4cf0848eed37f1d3b035c7dda Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2019-03-01gtpu: migrate old MULTIARCH macros to VLIB_NODE_FNFilip Tehlar5-50/+34
Change-Id: Id6e82910f8d991e355d3f26222eea4ac3ab091b1 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2018-11-14Remove c-11 memcpy checks from perf-critical codeDave Barach1-3/+3
Change-Id: Id4f37f5d4a03160572954a416efa1ef9b3d79ad1 Signed-off-by: Dave Barach <dave@barachs.net>
2018-10-23c11 safe string handling supportDave Barach4-8/+8
Change-Id: Ied34720ca5a6e6e717eea4e86003e854031b6eab Signed-off-by: Dave Barach <dave@barachs.net>
2018-09-25L2 BD: introduce a BD interface on which to send UU packetsNeale Ranns1-2/+2
Change-Id: I21ad6b04c19c8735d057174b1f260a59f2812241 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-09-24Trivial: Clean up some typos.Paul Vinciguerra2-10/+10
Change-Id: I085615fde1f966490f30ed5d32017b8b088cfd59 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2018-08-27cmake: Fix plugins .h includesMohsin Kazmi1-0/+4
Change-Id: I90600d000afb02e8969f3c01bcf9e4b5c10a7d39 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2018-08-25cmake: handle api_test_plugins in add_vpp_plugin macroDamjan Marion1-3/+1
Change-Id: I76a1711af0a920cce66e6dfb07d019ba505d55b7 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-08-25cmake: improve add_vpp_plugin macroDamjan Marion1-3/+6
Change-Id: Iffd5c45ab242a919592a1f686f7f880936b68a1a Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-08-17CMake as an alternative to autotools (experimental)Damjan Marion1-0/+26
Change-Id: Ibc59323e849810531dd0963e85493efad3b86857 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-07-19Remove unused argument to vlib_feature_nextDamjan Marion1-3/+3
Change-Id: Ieb8b53977fc8484c19780941e232ee072b667de3 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-07-19Fix IPv6 csum calculation in GTP-U encapsulationAndreas Schultz1-24/+25
The length field is included in the checksum. Therefor, we need to update it before calculating the checksum. Change-Id: Id23234efb80ea3747a0f8a5c7bf8621748d27635 Signed-off-by: Andreas Schultz <andreas.schultz@travelping.com>
2018-07-18Fix GTP-U length header field in encodingAndreas Schultz2-11/+23
The length in the GTPU header does not specify the length of the payload. It does specify the number of bytes following the fixed part (the first 8 bytes) of the GTPU header (see 3GPP TS 29.060, Sect. 9.3.1). Change-Id: I8ce73df015e1cf1f38d306666962c0058756111c Signed-off-by: Andreas Schultz <andreas.schultz@travelping.com>
2018-07-18Fix GTP-U header in 4x IPv4 vector encapsulationAndreas Schultz1-1/+1
The fourth GTP-U packet had a wrong reference, leading to data corruption. Change-Id: Id82f87368183d5e8b7047133c5ea799f2a9cb43c Signed-off-by: Andreas Schultz <andreas.schultz@travelping.com>
2018-05-04Harmonize vec/pool_get_aligned object sizes and alignment requestsDave Barach1-0/+3
Object sizes must evenly divide alignment requests, or vice versa. Otherwise, only the first object will be aligned as requested. Three choices: add CLIB_CACHE_LINE_ALIGN_MARK(align_me) at the end of structures, manually pad to an even divisor or multiple of the alignment request, or use plain vectors/pools. static assert for enforcement. Change-Id: I41aa6ff1a58267301d32aaf4b9cd24678ac1c147 Signed-off-by: Dave Barach <dbarach@cisco.com>
2018-02-01FIB: Consolidate several copies of fib_ip_proto() into one.Jon Loeliger1-6/+0
Rather than having multiple copies of the same function scattered around, promote the function into the FIB PROTOCOL definitions in fib_types.h. Change-Id: I11c4d85931167d3a5f3dc1278afecc8845b23cd7 Signed-off-by: Jon Loeliger <jdl@netgate.com>
2018-01-24Improve tunnel interface creation performanceJohn Lo1-14/+5
Modify interface creation to allow creation of tunnel interfaces without dedicated per tunnel output and tx nodes which are not used for most tunnel types. Also changed interface-output node function vnet_per_buffer_interface_output() so it does not rely on hw_if_index as the next node index which is not flexible nor efficient for large scale tunnel interfaces. The improvenemts are done for VXLAN, VXLAN-GPE, GENEVE and GTPU tunnels. GRE tunnel is still using per tunnel output nodes which will be changed in a separate patch with other GRE enhencements. Change-Id: I4123c01c0d2ead814417a867adb8c8a407e4df55 Signed-off-by: John Lo <loj@cisco.com>
2018-01-23VPPAPIGEN: vppapigen replacement in Python PLY.Ole Troan1-1/+1
This is a version of the VPP API generator in Python PLY. It supports the existing language, and has a plugin architecture for generators. Currently C and JSON are supported. Changes: - vl_api_version to option version = "major.minor.patch" - enum support - Added error checking and reporting - import support (removed the C pre-processor) - services (tying request/reply together) Version: option version = "1.0.0"; Enum: enum colours { RED, BLUE = 50, }; define foo { vl_api_colours_t colours; }; Services: service { rpc foo returns foo_reply; rpc foo_dump returns stream foo_details; rpc want_stats returns want_stats_reply events ip4_counters, ip6_counters; }; Future planned features: - unions - bool, text - array support (including length) - proto3 output plugin - Refactor C/C++ generator as a plugin - Refactor Java generator as a plugin Change-Id: Ifa289966c790e1b1a8e2938a91e69331e3a58bdf Signed-off-by: Ole Troan <ot@cisco.com>
2018-01-13Improve "show xxx tunnel" and "show int addr" outputJohn Lo1-7/+7
Improve "show xxx tunnel" output functions format_xxx_tunnel() for GRE, VXLAN, VXLAN-GPE, GENEVE and GTPU tunnels to make their output more consistent and provide better information. Improved the output of "show int addr" to make its info more consistent with tunnels and provide fib-index info. Change-Id: Icd4b5b85a5bec417f8ee19afea336c770ad3b4c5 Signed-off-by: John Lo <loj@cisco.com>
2018-01-11api: remove transport specific code from handlersFlorin Coras1-10/+8
This does not update api client code. In other words, if the client assumes the transport is shmem based, this patch does not change that. Furthermore, code that checks queue size, for tail dropping, is not updated. Done for the following apis: Plugins - acl - gtpu - memif - nat - pppoe VNET - bfd - bier - tapv2 - vhost user - dhcp - flow - geneve - ip - punt - ipsec/ipsec-gre - l2 - l2tp - lisp-cp/one-cp - lisp-gpe - map - mpls - policer - session - span - udp - tap - vxlan/vxlan-gpe - interface VPP - api/api.c OAM - oam_api.c Stats - stats.c Change-Id: I0e33ecefb2bdab0295698c0add948068a5a83345 Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-01-09api: refactor vlibmemoryFlorin Coras1-2/+2
- separate client/server code for both memory and socket apis - separate memory api code from generic vlib api code - move unix_shared_memory_fifo to svm and rename to svm_fifo_t - overall declutter Change-Id: I90cdd98ff74d0787d58825b914b0f1eafcfa4dc2 Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-01-05Unify and cleanup usage of hash_set/unset_mem by various tunnelsJohn Lo1-26/+7
Move the functions hash_set_key_copy() and hash_unset_key_free() which are dupilicated in various tunnel support code modules to hash.h as hash_set_mem_alloc() and hash_unset_mem_free() to be used by all. Change-Id: I40723cabe29072ab7feb1804c221f28606d8e4fe Signed-off-by: John Lo <loj@cisco.com>