summaryrefslogtreecommitdiffstats
path: root/src/plugins/lacp
AgeCommit message (Collapse)AuthorFilesLines
2019-12-07lacp: fix control_ping from pluginsOle Troan1-0/+2
Type: fix Signed-off-by: Ole Troan <ot@cisco.com> Change-Id: I030f75234a346ef6a20640c1a0ed65f4934867f2
2019-10-24lacp: add actor steady state check prior to skip processing lacp pduSteven Luong2-3/+5
In a rare event, we may be skipping processing lacp pdu's when the it is not in steady state. Type: fix Signed-off-by: Steven Luong <sluong@cisco.com> Change-Id: I3595d22dbff8a97dce9fb4d4452d2051bcf6f523
2019-09-27lacp: remove api boilerplateOle Troan5-229/+8
Type: refactor Signed-off-by: Ole Troan <ot@cisco.com> Change-Id: I5b77da8e9c476bd784be087a53b2eafb2d1a4831
2019-08-29lacp: continuing input packet trace from device driverSteven Luong1-5/+2
lacp gets the packet from the device driver. Let's continue the input packet trace's trajectory instead of restarting it in lacp-input. Type: fix Signed-off-by: Steven Luong <sluong@cisco.com> Change-Id: I4d4537e050742a23f74287086d38d39673ebd60f
2019-08-28lacp: mark is_mp_safe for show and dump binary APISteven Luong2-0/+5
show and dump binary APIs for lacp neighbors are running in the same thread as the create and delete interface. There is no need for barrier lock. Type: fix Signed-off-by: Steven Luong <sluong@cisco.com> Change-Id: Id584bd7408210fcc23b464ef2084f11f88bca58b
2019-08-17bonding lacp: deleting virtual interface which was enslaved may cause crashSteven Luong2-20/+27
Virtual interfaces may be part of the bonding like physical interfaces. The difference is virtual interfaces may disappear dynamically. As an example, the following CLI sequence may crash the debug image create vhost-user socket /tmp/sock1 create bond mode lacp bond add BondEthernet0 VirtualEthernet0/0/0 delete vhost-user VirtualEhernet0/0/0 Notice the virtual interface is deleted without first doing bond delete. The proper order is to first remove the slave interface from the bond prior to deleting the virtual interface as shown below. But we should handle it anyway. create vhost-user socket /tmp/sock1 create bond mode lacp bond add BondEthernet0 VirtualEthernet0/0/0 bond del VirtualEthernet0/0/0 <----- delete vhost-user VirtualEhernet0/0/0 The fix is to register for VNET_SW_INTERFACE_ADD_DEL_FUNCTION and remove the slave interface from the bond if the to-be-deleted interface is part of the bond. We check the interface that it is actually up before we send the lacp pdu. Up means both hw and sw admin up. Type: fix Signed-off-by: Steven Luong <sluong@cisco.com> Change-Id: If4d2da074338b16aab0df54e00d719e55c45221a
2019-07-22bonding: fix create bond CLIZhiyong Yang1-1/+1
1. "numa-only" is optional and is disabled by default for lacp mode. 2. update lacp doc. Type: fix Change-Id: I6a3a8423ef31ad9980353a796957693cd6205d73 Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
2019-07-09vat: unload unused vat pluginsDave Barach1-2/+4
If the corresponding vpp plugin is absent, return a non-zero clib_error_t * from vat_plugin_register ("xxx plugin not loaded"). The vat plugin calls dlclose on the vat plugin, and it disappears. Depending on the plugin configuration, this can reduce the vpp virtual size by several gigabytes. Added a VAT_PLUGIN(<plugin-name>) macro to vat_helper_macros, clean up boilerplate vat_plugin_register() implementations. Fixed a number of non-standard vat_plugin_register methods. Type: refactor Change-Id: Iac908e5af7d5497c78d6aa9c3c51cdae08374045 Signed-off-by: Dave Barach <dave@barachs.net>
2019-06-27lacp: custom dump for sw_interface_lacp_dumpSteven Luong1-3/+30
Add custom dump code for sw_interface_lacp_dump Type: fix Change-Id: Ifa76192ec65f596391c07b151d2a7fceed502665 Signed-off-by: Steven Luong <sluong@cisco.com>
2019-06-22lacp: convert clib_warning to event loggerSteven Luong4-20/+78
Replace clib_warning with event logger. The messages for the latter are stored in the event buffers which can be viewed with debug CLI anytime. Type: fix Change-Id: I5ede4d1f1f9f0ab8d66394f49383fc1838d397ae Signed-off-by: Steven Luong <sluong@cisco.com>
2019-06-12lacp: cleanup unnecessary pointer castZhiyong Yang5-46/+38
Change-Id: Idc3a7588dc73e7180a15b6ace3684d3c12986b9d Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
2019-06-11lacp: remove duplicated codeZhiyong Yang1-1/+0
Change-Id: I0fb646c350b392d69658ba4188ae25e0f0a6cdc1 Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
2019-06-07build: add -Wall and -fno-common, fix reported issuesBenoît Ganne1-1/+1
Type: refactor Change-Id: I8489ccd54411c2aa9355439c5641dc31012c64a2 Signed-off-by: Benoît Ganne <bganne@cisco.com> Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-06-07lacp: create lacp-process on demandSteven Luong4-26/+86
Create lacp-process when the very first slave interface is added to the bond. Log an event message when lacp-process starts/stops. Be mindful when lacp-process is signalled to stop. Type: refactor Change-Id: I79e10e0a2a385a21a52ae5b8735f24631fdba293 Signed-off-by: Steven Luong <sluong@cisco.com>
2019-05-16init / exit function orderingDave Barach1-6/+6
The vlib init function subsystem now supports a mix of procedural and formally-specified ordering constraints. We should eliminate procedural knowledge wherever possible. The following schemes are *roughly* equivalent: static clib_error_t *init_runs_first (vlib_main_t *vm) { clib_error_t *error; ... do some stuff... if ((error = vlib_call_init_function (init_runs_next))) return error; ... } VLIB_INIT_FUNCTION (init_runs_first); and static clib_error_t *init_runs_first (vlib_main_t *vm) { ... do some stuff... } VLIB_INIT_FUNCTION (init_runs_first) = { .runs_before = VLIB_INITS("init_runs_next"), }; The first form will [most likely] call "init_runs_next" on the spot. The second form means that "init_runs_first" runs before "init_runs_next," possibly much earlier in the sequence. Please DO NOT construct sets of init functions where A before B actually means A *right before* B. It's not necessary - simply combine A and B - and it leads to hugely annoying debugging exercises when trying to switch from ad-hoc procedural ordering constraints to formal ordering constraints. Change-Id: I5e4353503bf43b4acb11a45fb33c79a5ade8426c Signed-off-by: Dave Barach <dave@barachs.net>
2019-05-03plugins: clean up plugin descriptionsDave Wallace1-1/+1
- Make plugin descriptions more consistent so the output of "show plugin" can be used in the wiki. Change-Id: I4c6feb11e7dcc5a4cf0848eed37f1d3b035c7dda Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2019-04-03lacp: passive mode support [VPP-1551]Steven Luong7-56/+124
By definition, passive mode means the node does not start sending lacp pdu until it first hears from the partner or remote. - Rename ptx machine's BEGIN state to NO_PERIODIC state. - Put periodic machine in NO_PERIDOIC state when the interface is enabled for lacp. ptx machine will transition out of NO_PERIODIC state when the local node hears from the remote or when the local node is configured for active mode. - Also add send and receive statistics for debugging. Change-Id: I747953b9595ed31328b2f4f3e7a8d15d01e04d7f Signed-off-by: Steven Luong <sluong@cisco.com>
2019-03-07Remove local REPLY_MACRO so that socket transport works.Ole Troan1-36/+2
memif, lacp, nsh and cdp used local REPLY_MACROs. Remove and use those in api_helper.h Change-Id: Ib01d6ae5cff0b6f1cef90996a54b3177f0c53463 Signed-off-by: Ole Troan <ot@cisco.com>
2018-11-27cmake: Add protocol.h to lacp plugin .h includesAlexander Chernavin1-0/+1
Change-Id: I42e715345b6bc9b469d8b74ce216fc98b7824cf8 Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
2018-11-14Remove c-11 memcpy checks from perf-critical codeDave Barach1-1/+1
Change-Id: Id4f37f5d4a03160572954a416efa1ef9b3d79ad1 Signed-off-by: Dave Barach <dave@barachs.net>
2018-10-23c11 safe string handling supportDave Barach3-4/+4
Change-Id: Ied34720ca5a6e6e717eea4e86003e854031b6eab Signed-off-by: Dave Barach <dave@barachs.net>
2018-08-27cmake: Fix plugins .h includesMohsin Kazmi1-0/+10
Change-Id: I90600d000afb02e8969f3c01bcf9e4b5c10a7d39 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2018-08-25cmake: handle api_test_plugins in add_vpp_plugin macroDamjan Marion1-3/+1
Change-Id: I76a1711af0a920cce66e6dfb07d019ba505d55b7 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-08-25cmake: improve add_vpp_plugin macroDamjan Marion1-3/+6
Change-Id: Iffd5c45ab242a919592a1f686f7f880936b68a1a Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-08-17CMake as an alternative to autotools (experimental)Damjan Marion1-0/+32
Change-Id: Ibc59323e849810531dd0963e85493efad3b86857 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-08-17lacp: issue with slave interface admin up after it is added to the bond groupSteven1-2/+2
When the slave interface is admin up after it is added to the bond group, lacp does not send lacp pdu's to the interface because its periodic timer is not running. The issue was the slave interface's variables got reset after the state machines were initialized. Change-Id: I2942556ce29a4acc97db3be40293e69bed7b6679 Signed-off-by: Steven <sluong@cisco.com>
2018-05-25bond: performance harvestingSteven1-7/+7
- hash is great. But it is a bit too slow for the DP. Use direct array indexing to quickly retrieve the slave interface. - the algorithm used by flow hash is great. But it is a bit too slow for the DP. Use l2_hash_hash() extracted from lb_hash.h which ECMP is using. It makes use of intrinsic crc32 instruction set. - shortcut modulo arithmetic when the operand is 2**x (where x up to 4) to avoid division instruction. - special case for link count == 1 in bond_tx_fn() - use clib_mem_unaligned to access data for the packet to avoid alignment error - Fix some typos for packet tracing. Change-Id: I8eae3ad497061c5473aa675ba894ee0211120d25 Signed-off-by: Steven <sluong@cisco.com>
2018-04-24lacp: deleting the bond subinterface may cause lacp to lose the partner ↵Steven2-15/+8
[VPP-1251] Problem: When the bond subinterface is removed, it was observed that we lost the lacp partner. Show hardware shows rx counter goes up, but show interface does not for the slave interfaces. Cause: We reset the interface promiscuous mode when the bond subinterface is deleted. This causes dpdk not to accept any packet. Leave the interface in promiscuous mode fixes the problem. Other fixes: There are few places we use hw_if_index as if they are sw_if_index. But they don't necessarily have the same value. As soon as a subinterface is created, they start to diverge. The fix is to use the correct API for the hw_if_index and sw_if_index. Change-Id: I1e6b8bca0a4aae396d217a141271cbf968500c91 Signed-off-by: Steven <sluong@cisco.com> (cherry picked from commit 42c6599bf3057a7e8f4f00f5b6a9dd72af48d283)
2018-04-23lacp: partner may time us out if fast-rate is configured [VPP-1247]Steven5-8/+14
We should be sending LACP PDU every second if the partner has LACP_TIMEOUT flag set which means it will time us out in 3 seconds. Add interface name for lacp trace Change-Id: If7d816c062d03e80cc0dd7d10dba0b76ace0664a Signed-off-by: Steven <sluong@cisco.com>
2018-04-04Doc updates prior to branchChris Luke1-9/+21
Change-Id: Ibcffee7d20dbb79720199bcd82d2353f39d5544f Signed-off-by: Chris Luke <chrisy@flirble.org>
2018-03-30lacp: faster convergence for slow-rate config optionSteven6-18/+29
Do fast-rate if we are not yet synchronized with the partner. Stop sending LACP updates as a flash in the worker thread. Just expire the timer and let the lacp_process handle sending LACP PDU. Change-Id: I8b36fe74e752e7f45bd4a8d70512c0341cc197a1 Signed-off-by: Steven <sluong@cisco.com>
2018-03-21bond: Add bonding driver and LACP protocolSteven22-0/+3943
Add bonding driver to support creation of bond interface which composes of multiple slave interfaces. The slave interfaces could be physical interfaces, or just any virtual interfaces. For example, memif interfaces. The syntax to create a bond interface is create bond mode <lacp | xor | acitve-backup | broadcast | round-robin> To enslave an interface to the bond interface, enslave interface TenGigabitEthernet6/0/0 to BondEthernet0 Please see src/plugins/lacp/lacp_doc.md for more examples and additional options. LACP is a control plane protocol which manages and monitors the status of the slave interfaces. The protocol is part of 802.3ad standard. This patch implements LACPv1. LACPv2 is not supported. To enable LACP on the bond interface, specify "mode lacp" when the bond interface is created. The syntax to enslave a slave interface is the same as other bonding modes. Change-Id: I06581d3b87635972f9f0e1ec50b67560fc13e26c Signed-off-by: Steven <sluong@cisco.com>