Age | Commit message (Collapse) | Author | Files | Lines |
|
Change-Id: Iffd5c45ab242a919592a1f686f7f880936b68a1a
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: Ibc59323e849810531dd0963e85493efad3b86857
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I23be9c29227e7dd1bb11b5b7fa910bb61c2be6c9
Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>
(cherry picked from commit b4b2488202ff4282cc4a7bd779cc33934286c5cd)
|
|
It is cheaper to get thread index from vlib_main_t if available...
Change-Id: I4582e160d06d9d7fccdc54271912f0635da79b50
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: Iedebbac71d3e694b915d6a126c80ecc3b5473a4a
Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>
|
|
Fixes clang error: equality comparison with extraneous parentheses
Changing all the #defines to inlines.
Change-Id: I30a931679ac3325b23b249b1ae28c7c8cf54b012
Signed-off-by: Sirshak Das<sirshak.das@arm.com>
|
|
Change-Id: Iea2c661cb3e0728bb2d10b06791ed84fed00f6a7
Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>
|
|
Change-Id: I3ac348a8cb1a515dfe1839eaa084c87719d282e1
Signed-off-by: Andrey "Zed" Zaikin <zed.0xff@gmail.com>
|
|
Change-Id: I9343672c5765a5a4cb56c99fa5de176ddcac62c7
Signed-off-by: Andrey "Zed" Zaikin <zed.0xff@gmail.com>
|
|
- hash is great. But it is a bit too slow for the DP. Use direct array indexing
to quickly retrieve the slave interface.
- the algorithm used by flow hash is great. But it is a bit too slow for the DP.
Use l2_hash_hash() extracted from lb_hash.h which ECMP is using. It makes use
of intrinsic crc32 instruction set.
- shortcut modulo arithmetic when the operand is 2**x (where x up to 4) to
avoid division instruction.
- special case for link count == 1 in bond_tx_fn()
- use clib_mem_unaligned to access data for the packet to avoid alignment error
- Fix some typos for packet tracing.
Change-Id: I8eae3ad497061c5473aa675ba894ee0211120d25
Signed-off-by: Steven <sluong@cisco.com>
|
|
Add support of NAT66
Change-Id: Ie6aa79078a3835f989829b9a597c448dfd2f9ea3
Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>
|
|
Change-Id: I994649761fe2e66e12ae0e49a84fb1d0a966ddfb
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Though dst-IP address would be change in LB plugin with L3DSR method,
layer-4 checksum would not be recomputed after this change.
Related changes:
- L3DSR: https://gerrit.fd.io/r/#/c/10203/
Change-Id: I98de7b8d80186ac77608a68050208c08d90b7c3b
Signed-off-by: Yusuke Tatsumi <ytatsumi@yahoo-corp.jp>
|
|
L3DSR is used to overcome Layer 2 limitations
of Direct Server Return Load Balancing.
It maps VIP to DSCP bits, and reuse TOS bits to transfer it
to server, and then server will get VIP from DSCP-to-VIP mapping.
Please refer to https://www.nanog.org/meetings/nanog51/presentations/Monday/NANOG51.Talk45.nanog51-Schaumann.pdf
Change-Id: I403ffeadfb04ed0265086eb2dc41f2e17f8f34cb
Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>
|
|
This is a version of the VPP API generator in Python PLY. It supports
the existing language, and has a plugin architecture for generators.
Currently C and JSON are supported.
Changes:
- vl_api_version to option version = "major.minor.patch"
- enum support
- Added error checking and reporting
- import support (removed the C pre-processor)
- services (tying request/reply together)
Version:
option version = "1.0.0";
Enum:
enum colours {
RED,
BLUE = 50,
};
define foo {
vl_api_colours_t colours;
};
Services:
service {
rpc foo returns foo_reply;
rpc foo_dump returns stream foo_details;
rpc want_stats returns want_stats_reply
events ip4_counters, ip6_counters;
};
Future planned features:
- unions
- bool, text
- array support (including length)
- proto3 output plugin
- Refactor C/C++ generator as a plugin
- Refactor Java generator as a plugin
Change-Id: Ifa289966c790e1b1a8e2938a91e69331e3a58bdf
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
This allows arm platforms to also take advantage of crc32 hardware
acceleration.
* add a wrapper for crc32_u64. It's the only one really used. Using it
instead of a call to clib_crc32c() eases building symmetrical hash
functions.
* replace #ifdef on SSE4 by a test on clib_crc32c_uses_intrinsics.
Note: keep the test on i386
* fix typo in lb test log
Change-Id: I03a0897b70f6c1717e6901d93cf0fe024d5facb5
Signed-off-by: Gabriel Ganne <gabriel.ganne@enea.com>
|
|
Change-Id: Ic8b193e93ce18ca82b294816aa7ee0ef31d64bc2
Signed-off-by: Pierre Pfister <ppfister@cisco.com>
Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>
|
|
Add new cli api: "test lb flowtable flush" which flushes everything.
Call this new cli function after the end of each lb unit test.
Change-Id: I71d04a7bfba398f7d4dd9cc3ed24bba786943663
Signed-off-by: Gabriel Ganne <gabriel.ganne@enea.com>
|
|
* (vip - lbm->vips) is u64; change format from [%u] to [%lu]
* vip->plen is u8, but format looks for u32; add exlicit cast
(this cast was done implicitely)
On ARM platforms, these prevent a loop in the second call to
format_white_space() which would get an invalid (huge) indent value;
the result *looked like* an infinite loop.
Change-Id: I675ef2f98e4ba3d9e8aef12022d38b1d22981da8
Signed-off-by: Gabriel Ganne <gabriel.ganne@enea.com>
|
|
Add one of these statements to foo.api:
vl_api_version 1.2.3
to generate a version tuple stanza in foo.api.h:
/****** Version tuple *****/
vl_api_version_tuple(foo, 1, 2, 3)
Change-Id: Ic514439e4677999daa8463a94f948f76b132ff15
Signed-off-by: Dave Barach <dave@barachs.net>
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
- always use 'va_args' as pointer in all format_* functions
- u32 for all 'indent' params as it's declaration was inconsistent
Change-Id: Ic5799309a6b104c9b50fec309cba789c8da99e79
Signed-off-by: Christophe Fontaine <christophe.fontaine@enea.com>
|
|
- Teach vpp_api_test to send/receive API messages over sockets
- Add memfd-based shared memory
- Add api messages to create memfd-based shared memory segments
- vpp_api_test supports both socket and shared memory segment connections
- vpp_api_test pivot from socket to shared memory API messaging
- add socket client support to libvlibclient.so
- dead client reaper sends ping messages, container-friendly
- dead client reaper falls back to kill (<pid>, 0) live checking
if e.g. a python app goes silent for tens of seconds
- handle ping messages in python client support code
- teach show api ring about pairwise shared-memory segments
- fix ip probing of already resolved destinations (VPP-998)
We'll need this work to implement proper host-stack client isolation
Change-Id: Ic23b65f75c854d0393d9a2e9d6b122a9551be769
Signed-off-by: Dave Barach <dave@barachs.net>
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I92de5b9ed42cda6c0438b8dc71892d322b642a70
Signed-off-by: flyingeagle23 <wang.hui56@zte.com.cn>
|
|
Change-Id: Ic1c440b2594c3ec4cdc75730069f16432cdb9587
Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>
|
|
32-bit code still can use crc32c instructions, but it operates
on 32 registers
Change-Id: I9bb6b0b59635d6ea6a753584676ebcf59c8f6584
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I72298aaae7d172082ece3a8edea4217c11b28d79
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
tests). The DPO was incorrectly initialised with FIB_PROTO_MAX
Change-Id: I962df9e162e4dfb6837a5ce79ea795d5ff2d7315
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
This patch deprecates stack-based thread identification,
Also removes requirement that thread stacks are adjacent.
Finally, possibly annoying for some folks, it renames
all occurences of cpu_index and cpu_number with thread
index. Using word "cpu" is misleading here as thread can
be migrated ti different CPU, and also it is not related
to linux cpu index.
Change-Id: I68cdaf661e701d2336fc953dcb9978d10a70f7c1
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I88b322a5d602f3d6d3310e971479180a89430e0e
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I08ab1fd0abdd1db4aff11a38c9c0134b01368e11
Signed-off-by: Eyal Bari <ebari@cisco.com>
|
|
In the CLI parsing, below is a common pattern:
/* Get a line of input. */
if (!unformat_user (input, unformat_line_input, line_input))
return 0;
while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT)
{
if (unformat (line_input, "x"))
x = 1;
:
else
return clib_error_return (0, "unknown input `%U'",
format_unformat_error, line_input);
}
unformat_free (line_input);
The 'else' returns if an unknown string is encountered. There a memory
leak because the 'unformat_free(line_input)' is not called. There is a
large number of instances of this pattern.
Replaced the previous pattern with:
/* Get a line of input. */
if (!unformat_user (input, unformat_line_input, line_input))
return 0;
while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT)
{
if (unformat (line_input, "x"))
x = 1;
:
else
{
error = clib_error_return (0, "unknown input `%U'",
format_unformat_error, line_input);
goto done:
}
}
/* ...Remaining code... */
done:
unformat_free (line_input);
return error;
}
In multiple files, 'unformat_free (line_input);' was never called, so
there was a memory leak whether an invalid string was entered or not.
Also, there were multiple instance where:
error = clib_error_return (0, "unknown input `%U'",
format_unformat_error, line_input);
used 'input' as the last parameter instead of 'line_input'. The result
is that output did not contain the substring in error, instead just an
empty string. Fixed all of those as well.
There are a lot of file, and very mind numbing work, so tried to keep
it to a pattern to avoid mistakes.
Change-Id: I8902f0c32a47dd7fb3bb3471a89818571702f1d2
Signed-off-by: Billy McFall <bmcfall@redhat.com>
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
This patch replaces requirement for vlib_plugin_register function
in the plugin so file and introduces new macro:
VLIB_PLUGIN_REGISTER () = {
.version = "version string",
.version_required = "requred version",
.default_disabled = 1,
.early_init = "early_init_function_name",
};
Plugin will nor be loaded if .default_disabled is set to 1
unless explicitely enabled in startup.conf.
If .verstion_required is set, plugin will not be loaded if there
is version mismatch between plugin and vpp. This can be bypassed
by setting "skip-version-check" for specific plugin.
If .early-init string is present, plugin loader will try to resolve
this specific symbol in the plugin namespace and make a function call.
Following startup.conf configuration is added:
plugins {
path /path/to/plugin/directory
plugin ila_plugin.so { enable skip-version-check }
plugin acl_plugin.so { disable }
}
Change-Id: I706c691dd34d94ffe9e02b59831af8859a95f061
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Instead, have them accept and assign a return paramter leaving
the return control flow up to the caller. Clean up otherwise
misleading returns present even after "NOT REACHED" comments.
Change-Id: I0861921f73ab65d55b95eabd27514f0129152723
Signed-off-by: Jon Loeliger <jdl@netgate.com>
|
|
Rather than rely on an unbound variable, explicitly introduce
the timeout variable within the 'do { ... } while (0)' construct
as a block-local variable.
Change-Id: I6e78635290f9b5ab3f56b7f116c5fa762c88c9e9
Signed-off-by: Jon Loeliger <jdl@netgate.com>
|
|
Rather than blindly assume an unbound, fixed message parameter
explicilty pass it as a paramter to the S() macro.
Change-Id: Ieea1f1815cadd2eec7d9240408d69acdc3caa49a
Signed-off-by: Jon Loeliger <jdl@netgate.com>
|
|
Rather than maintain (?) an unused second parameter, t, and pull
an unbound message pointer, mp, out of context, explicitly list
the message pointer as the second parameter.
Change-Id: I92143efda6211cdf6b935470f8c71579742a6b64
Signed-off-by: Jon Loeliger <jdl@netgate.com>
|
|
Change-Id: I422a3f168bd483e011cfaf54af022cb79b78db02
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: I81f33f5153d5afac94b66b5a8cb91da77463af79
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: I1c3b87e886603678368428ae56a6bd3327cbc90d
Signed-off-by: Damjan Marion <damarion@cisco.com>
|