Age | Commit message (Collapse) | Author | Files | Lines |
|
Type: improvement
Currently, when the link goes down on an interface, routes that resolve
through that interface and created with Nexthop API are removed by the
kernel. However, IPv4 routes remain in the FIB because the kernel
doesn't send any notifications about that.
And for the plugin working with user-space applications that create
routes in the kernel using Nexthop API there should be a mechanism to
synchronize the FIB and the kernel in this case.
With this change, add two new startup configuration options to the
plugin to be able to control what should happen with static and dynamic
routes managed by the plugin on link down:
- del-static-on-link-down (disabled by default, delete routes created
with the linux-cp static FIB source on link down),
- del-dynamic-on-link-down (disabled by default, delete routes created
with the linux-cp dynamic FIB source on link down).
Then, monitor link state changes on interfaces for which a linux-cp pair
exists. If the link goes down on one of the interfaces, process routes
that resolve through that interface according to the new configurations.
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
Change-Id: I0fbaeeca3f3d1fcd22e8eebb08a0a4a3d0dfe5b8
|
|
Type: fix
Currently, a tap interface created to be a member of a linux-cp pair has
default link state (down) and default link speed (10Mb/s). Then the
plugin monitors the link state of the paired hardware interface and if
it changes, the new link state is reflected on the tap interface. And
when the new link state is "up", the link speed is also reflected on the
tap interface.
The problem is that this scheme implies that the hardware interface's
link state is "down" at the moment of the linux-cp pair creation and
then changes. But there are cases when the link state is already "up" at
that moment. If that is the case, the link speed on the tap interface
will remain the default one until the link comes down and then comes up.
With this fix, when a linux-cp pair is created, reflect current link
state of the hardware interface being paired on the created tap
interface.
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
Change-Id: I73664d753f4daaa6d439c9ca898fb7363d21c06d
|
|
Type: fix
otherwise the feature is enabled n times for n lcp-pairs and the packets go n times through the feature.
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I8e47e4a293d6e2711f54aa09e9545e5e07728026
|
|
Type: feature
please see FEATURE.yaml for details.
Signed-off-by: Neale Ranns <nranns@cisco.com>
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
Signed-off-by: Jon Loeliger <jdl@netgate.com>
Signed-off-by: Pim van Pelt <pim@ipng.nl>
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I6255fd9953d0b03e6b4fe75b67a6845a7c206f74
Signed-off-by: Pim van Pelt <pim@ipng.nl>
|
|
Part 1 -- notes in https://ipng.ch/s/articles/2021/08/13/vpp-2.html
Add the ability for VPP to copy out (sync) its state from the dataplane
to Linux Interface Pairs, when they exist. Gated by a configuration
flag (linux-cp { lcp-sync }), and by a CLI option to toggle on/off,
synchronize the following events:
- Interface state changes
- Interface MTU changes
- Interface IPv4/IPv6 address add/deletion
In VPP, subints can have any link state and MTU, orthogonal to their
phy. In Linux, setting admin-down on a phy forces its children to be
down as well. Also, in Linux, MTU of children must not exceed that of
the phy. Add a state synchronizer which walks over phy+subints to
ensure Linux and VPP end up in the same consistent state.
Part 2 -- notes in https://ipng.ch/s/articles/2021/08/15/vpp-3.html
Add the ability for VPP to autocreate sub-interfaces of existing Linux
Interface pairs. Gated by a configuration flag
(linux-cp { lcp-auto-subint }), and by a CLI option to toggle on/off,
synchronize the following event:
- Sub-interface creation (dot1q, dot1ad, QinQ and QinAD)
A few other changes:
- Add two functions into netlink.[ch] to delete ip4 and ip6 addresses.
- Remove a spurious logline (printing MTU) in netlink.c.
- Resolve a TODO around vnet_sw_interface_supports_addressing()
Type: improvement
Signed-off-by: Pim van Pelt <pim@ipng.nl>
Change-Id: I34fc070e80af4013be58d7a8cbf64296cc760e4e
Signed-off-by: Pim van Pelt <pim@ipng.nl>
|
|
This adds a create_tap_v3 api that has a num_tx_queues
parameter allowing to create more than num_workers queues,
following on multi TX support
Type: feature
Change-Id: Idce433147e8dd165f842241d6c76e041e1b1c9b8
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
Type: fix
This only happens when the user deletes the physical before they delete the pair, that's not supoosed to be the case, but don't crash if it is.
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I8c2317b360d897775dde23833d04430f88531cbd
|
|
lip->lip_host_name is a non-NULL terminated vector.
Type: fix
Change-Id: Ic154ad7f57f0b507204e55f78995cc0e89132e57
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Linux Control Plane interface creation logic is currently only able to
create untagged interfaces, and dot1q VLAN sub-interfaces. This change
makes it possible to create dot1ad VLAN sub-ints, and Q-in-AD as well
as Q-in-Q sub-interfaces as well.
It makes the plugin a bit more robust by catching a few common errors,
such as creating an lcp on a sub-interface without its parent having
one, and creating an lcp on a sub-interface that is not exact-match.
This change has a bunch of smaller improvemnets as well. I documented
my work in this post:
https://ipng.ch/s/articles/2021/08/12/vpp-1.html
It shows that after the change is merged, all VPP interface types now
create and operate cleanly as LCP interfaces as well.
Type: improvement
Signed-off-by: Pim van Pelt <pim@ipng.nl>
Change-Id: I322669f7316d44c227090b83d6a574fb9c00e76a
|
|
* Add clib_socket_init support for abstract sockets
if name starts with an '@'
* Add clib_socket_init_netns to open socket in netns
* Add clib_netns_open
Type: feature
Change-Id: I89637ad657c702ec38ddecb5c03a1673d0dfb104
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
Type: fix
Change-Id: I5677cbb183b10c974a3a2e569d1a7a525a7eb45d
Signed-off-by: Sergio Gonzalez Monroy <sgmonroy@gmail.com>
|
|
Type: improvement
Allow callbacks to be registered which will be called when an
interface pair is added or deleted.
Change-Id: I1c413ac2ada802021f9e56e2f878ce67e5eda2f5
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
interface created
Type: improvement
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I31a83cd50513078895078bae3ae11372d351ddcd
|
|
lip_host_name is a non-NULL terminated vector, not a NULL-terminated
C-string.
Type: fix
Change-Id: Ie5da59bc5680be72251904467d77b18263c882f8
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: feature
please see FEATURE.yaml for details.
Signed-off-by: Neale Ranns <nranns@cisco.com>
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
Signed-off-by: Jon Loeliger <jdl@netgate.com>
Signed-off-by: Pim van Pelt <pim@ipng.nl>
Change-Id: I04a45c15c0838906aa787e06660fa29f39f755fa
|