| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Type: improvement
VPP crashes when a linux-cp tap is added to a bridge on the host system
because rtnl_neigh_get_dst() returns NULL for the neighbor message that
is sent by the kernel.
Check for NULL before trying to use the address from a neighbor in a
netlink message.
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
Change-Id: I8a683d815a09620df9c0cc76e18df39828428e2c
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Type: fix
Signed-off-by: Stanislav Zaikin <zstaseg@gmail.com>
Change-Id: I792467b73449074e59c4232b1f82d134c399624c
|
|
Type: fix
Fixes: 616447c39231
In lcp_router_link_mtu(), either vnet_hw_interface_set_mtu() or
vnet_sw_interface_set_mtu() is called, based on whether this appears to
be a physical interface. The test to determine whether this is true was
incorrect and probably never worked right so vnet_sw_interface_set_mtu()
was always being called. This causes some breakage with Recent changes
to code which manages interface MTUs. Fix the test so the right function
is called.
Change-Id: I1ecccbce37d5a1e53b2349ed40f3d0d27eb03569
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Type: improvement
Currently, the plugin can monitor link state changes on hardware
interfaces for which a linux-cp pair exists. When the link goes down on
one of the hardware interfaces, the plugin processes IPv4 routes that
resolve through that interface according to the configurations:
del-static-on-link-down and del-dynamic-on-link-down.
The problem is that link state changes are not signaled for
subinterfaces and the code that handles IPv4 routes is not triggered.
When the link on a hardware interface goes down, it implies
that subinterfaces added to that interface also will have the link in
the down state.
With this change, when the link goes down on a hardware interface,
iterate over subinterfaces added to the interface and apply the same
logic of routes processing as for hardware interfaces.
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
Change-Id: I97337d2e328437c73f2d99a00737768778f197a1
|
|
Type: improvement
lcp_router_table_flush() is used to remove routes from the given route
table if they are resolved through the given interface with specified
FIB source. Currently, if you need to remove routes from a route table
that are resolved through one of the interfaces from a vector, the
function has to be executed for every interface from the vector. Every
execution walks the route table again.
With this change, lcp_router_table_flush() accepts a vector of
interfaces. Thus, the function can walk a single route table once and
delete routes that resolve through one of the interfaces from the
vector.
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
Change-Id: I6d99384064d279dea24bb4dc1790a1af943be41c
|
|
Type: improvement
Currently, when the link goes down on an interface, routes that resolve
through that interface and created with Nexthop API are removed by the
kernel. However, IPv4 routes remain in the FIB because the kernel
doesn't send any notifications about that.
And for the plugin working with user-space applications that create
routes in the kernel using Nexthop API there should be a mechanism to
synchronize the FIB and the kernel in this case.
With this change, add two new startup configuration options to the
plugin to be able to control what should happen with static and dynamic
routes managed by the plugin on link down:
- del-static-on-link-down (disabled by default, delete routes created
with the linux-cp static FIB source on link down),
- del-dynamic-on-link-down (disabled by default, delete routes created
with the linux-cp dynamic FIB source on link down).
Then, monitor link state changes on interfaces for which a linux-cp pair
exists. If the link goes down on one of the interfaces, process routes
that resolve through that interface according to the new configurations.
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
Change-Id: I0fbaeeca3f3d1fcd22e8eebb08a0a4a3d0dfe5b8
|
|
Type: improvement
Currently, when an interface is brought down administratively, IPv4
routes that resolve through that interface remain in the FIB. However,
the kernel removes those routes but doesn't send any notifications about
that. Desynchronization between the kernel and VPP happens.
With this change, when a notification received from the kernel
indicating that an interface was brought down, in addition to bringing
the VPP interface down, walk the IPv4 FIB bound to that interface and
remove any entries that resolve through that interface and were added
with one of the linux-cp FIB sources.
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
Change-Id: I0cd14bb63c9e6616ae1c5739b17c3bf33b186bc2
|
|
Type: improvement
When dump of neighbors is requested, the replies will also include
neighbor entries for IPv6 multicast addresses:
GigabitEthernet0/8/0 S ff02::16 33:33:00:00:00:16
GigabitEthernet0/8/0 S ff02::1:ff76:7135 33:33:ff:76:71:35
GigabitEthernet0/8/0 S ff02::2 33:33:00:00:00:02
Such entries are not reported in netlink notification messages and
VPP is unlikely to use these.
With this change, ignore neighbor entries when the IP address is a
multicast address.
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
Change-Id: Ic712aa4904f1d559f31fd89ff4541268e2340f84
|
|
Type: improvement
During synchronization, only the current actual set of entries is
loaded. If some entries are no longer present in the set being loaded
but present in VPP, they should be removed to fully syncronize.
With this change, add handlers for sync begin and end events. Begin
handlers will mark the entries as stale. End handlers will remove the
entries that are still marked as stale.
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
Change-Id: I4f7e872af3e1c9ffa6c63bcc3984ec76def1bb43
|
|
Type: improvement
For some message types, timestamps are checked on netlink message to
decide whether the message should be applied. For notification messages
timestamps are expected to be always available.
With this change, before accessing the timestamp, make sure the message
info object that carries it is not null. If it is null, pass the check.
This is to be ready to process dump replies that will not need the
timestamp check and will have the message info object set to null.
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
Change-Id: Ic7211c0d451d72f6a5248898b3a8f8e0bca8f7aa
|
|
Some possible side effects for multicast routes appears to be in
lcp_router_table_add_or_lock. so ff00/8 route will be processed
for ospf purposes the right way
Ignore IPv6 kernel routes
Skip adding auto routes into FIB
Type: fix
Signed-off-by: Vladimir Ratnikov <vratnikov@netgate.com>
Change-Id: I35f73d629a7fffca7f7d4547adc2549b72c2048f
|
|
Type: feature
please see FEATURE.yaml for details.
Signed-off-by: Neale Ranns <nranns@cisco.com>
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
Signed-off-by: Jon Loeliger <jdl@netgate.com>
Signed-off-by: Pim van Pelt <pim@ipng.nl>
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I6255fd9953d0b03e6b4fe75b67a6845a7c206f74
Signed-off-by: Pim van Pelt <pim@ipng.nl>
|
Matthew Smith
Stanislav Zaikin
Alexander Chernavin
Vladimir Ratnikov
Neale Ranns