Age | Commit message (Collapse) | Author | Files | Lines |
|
Type: fix
otherwise the feature is enabled n times for n lcp-pairs and the packets go n times through the feature.
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I8e47e4a293d6e2711f54aa09e9545e5e07728026
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Icb86be8b37fa821f05300ee4415065ca96425fcb
|
|
Type: fix
Possible negative return in open(), do not use curr_ns_fd if it is
negative. Addresses Coverity issue 248535
Signed-off-by: Pim van Pelt <pim@ipng.nl>
Change-Id: I8429ede0f1fe9fe6619e3c4dbd83adb620ea62c2
|
|
Type: feature
please see FEATURE.yaml for details.
Signed-off-by: Neale Ranns <nranns@cisco.com>
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
Signed-off-by: Jon Loeliger <jdl@netgate.com>
Signed-off-by: Pim van Pelt <pim@ipng.nl>
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I6255fd9953d0b03e6b4fe75b67a6845a7c206f74
Signed-off-by: Pim van Pelt <pim@ipng.nl>
|
|
Found by coverity as defect id 243763
Signed-off-by: Pim van Pelt <pim@ipng.nl>
Type: fix
Change-Id: Idbada5528a1f2625f6498072d538edf306268b6d
|
|
Part 1 -- notes in https://ipng.ch/s/articles/2021/08/13/vpp-2.html
Add the ability for VPP to copy out (sync) its state from the dataplane
to Linux Interface Pairs, when they exist. Gated by a configuration
flag (linux-cp { lcp-sync }), and by a CLI option to toggle on/off,
synchronize the following events:
- Interface state changes
- Interface MTU changes
- Interface IPv4/IPv6 address add/deletion
In VPP, subints can have any link state and MTU, orthogonal to their
phy. In Linux, setting admin-down on a phy forces its children to be
down as well. Also, in Linux, MTU of children must not exceed that of
the phy. Add a state synchronizer which walks over phy+subints to
ensure Linux and VPP end up in the same consistent state.
Part 2 -- notes in https://ipng.ch/s/articles/2021/08/15/vpp-3.html
Add the ability for VPP to autocreate sub-interfaces of existing Linux
Interface pairs. Gated by a configuration flag
(linux-cp { lcp-auto-subint }), and by a CLI option to toggle on/off,
synchronize the following event:
- Sub-interface creation (dot1q, dot1ad, QinQ and QinAD)
A few other changes:
- Add two functions into netlink.[ch] to delete ip4 and ip6 addresses.
- Remove a spurious logline (printing MTU) in netlink.c.
- Resolve a TODO around vnet_sw_interface_supports_addressing()
Type: improvement
Signed-off-by: Pim van Pelt <pim@ipng.nl>
Change-Id: I34fc070e80af4013be58d7a8cbf64296cc760e4e
Signed-off-by: Pim van Pelt <pim@ipng.nl>
|
|
This adds a create_tap_v3 api that has a num_tx_queues
parameter allowing to create more than num_workers queues,
following on multi TX support
Type: feature
Change-Id: Idce433147e8dd165f842241d6c76e041e1b1c9b8
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
Type: improvement
Change-Id: Ifa074dfd337f9cd68858468d34abf641fe7f247f
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: fix
This only happens when the user deletes the physical before they delete the pair, that's not supoosed to be the case, but don't crash if it is.
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I8c2317b360d897775dde23833d04430f88531cbd
|
|
lip->lip_host_name is a non-NULL terminated vector.
Type: fix
Change-Id: Ic154ad7f57f0b507204e55f78995cc0e89132e57
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Linux Control Plane interface creation logic is currently only able to
create untagged interfaces, and dot1q VLAN sub-interfaces. This change
makes it possible to create dot1ad VLAN sub-ints, and Q-in-AD as well
as Q-in-Q sub-interfaces as well.
It makes the plugin a bit more robust by catching a few common errors,
such as creating an lcp on a sub-interface without its parent having
one, and creating an lcp on a sub-interface that is not exact-match.
This change has a bunch of smaller improvemnets as well. I documented
my work in this post:
https://ipng.ch/s/articles/2021/08/12/vpp-1.html
It shows that after the change is merged, all VPP interface types now
create and operate cleanly as LCP interfaces as well.
Type: improvement
Signed-off-by: Pim van Pelt <pim@ipng.nl>
Change-Id: I322669f7316d44c227090b83d6a574fb9c00e76a
|
|
Type: fix
Signed-off-by: Pim van Pelt <pim@ipng.nl>
Change-Id: I390282ecc63600728cf11413510c0169178e305c
|
|
* Add clib_socket_init support for abstract sockets
if name starts with an '@'
* Add clib_socket_init_netns to open socket in netns
* Add clib_netns_open
Type: feature
Change-Id: I89637ad657c702ec38ddecb5c03a1673d0dfb104
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
Type: fix
Change-Id: I5677cbb183b10c974a3a2e569d1a7a525a7eb45d
Signed-off-by: Sergio Gonzalez Monroy <sgmonroy@gmail.com>
|
|
Type: fix
Outbound packets which arrive on tun/L3 interfaces use a default
adjacency for the interface & address family from the corresponding
interface pair. However, there are entries in the linux-cp adj table
that are created for them. Managing these entries might cause a
segfault because the rewrite data might exceed the reserved space for
it of 28 bytes in the linux-cp adj key (e.g. in case of GRE IPv6).
With this change, stop creating adjacencies for tun/L3 interfaces in
the linux-cp adj table and delegating them.
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
Change-Id: I4bcd685860053ab87c65064c182e3ed53fd4fae9
|
|
Type: improvement
Allow callbacks to be registered which will be called when an
interface pair is added or deleted.
Change-Id: I1c413ac2ada802021f9e56e2f878ce67e5eda2f5
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Type: fix
Outbound packets from the host have an adjacency lookup performed so
buffer metadata can be filled in and output features can be applied.
If no adjacency is found for a packet, it gets dropped. This breaks
DHCP and possibly other things since the DHCP reply to a discover
request is sent to a destination MAC address that is determined by
the contents of the request packet rather than any existing neighbor
table entry.
If adjacency lookup for outbound packets does not find an entry, use
the default adjacency for the interface & address family.
Change-Id: Ia53a4df3a5bad2991768cfe4a84c560b879e656f
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
interface created
Type: improvement
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I31a83cd50513078895078bae3ae11372d351ddcd
|
|
Type: improvement
When an adjacency is created, add the linux-cp delegate on the new
adjacency so we can later deal with modifications & deletions in our
cache of adjacency data.
Add a pool of hash keys and associate the pool index for a particular
key with the adj_delegate_t. If the rewrite on an adjacency is changed,
this will allow us to delete the old hash table entry and it will not
become orphaned.
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
Change-Id: I072b960c02cf377d66f7d18b8c0e9e05824a0ca3
|
|
- Generate copyright year and version
instead of using hard-coded data
Type: refactor
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
Change-Id: I6058f5025323b3aa483f5df4a2c4371e27b5914e
|
|
Type: make
Change-Id: I780c1c81a50cb92bc89c05856efd8ef88479c0ab
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: improvement
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: I9e65c94a5a05047a5104e9361ea36eac77b40442
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
lip_host_name is a non-NULL terminated vector, not a NULL-terminated
C-string.
Type: fix
Change-Id: Ie5da59bc5680be72251904467d77b18263c882f8
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: fix
If no host interface name is passed to the CLI command which creates
an interface pair, NULL gets passed to lcp_itf_pair_create() and a
seg fault occurs. Check whether a host interface name was provided
and fail gracefully if none was given.
Change-Id: I82886f4c2ee710e206c751c34a74399112e9062c
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Type: feature
please see FEATURE.yaml for details.
Signed-off-by: Neale Ranns <nranns@cisco.com>
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
Signed-off-by: Jon Loeliger <jdl@netgate.com>
Signed-off-by: Pim van Pelt <pim@ipng.nl>
Change-Id: I04a45c15c0838906aa787e06660fa29f39f755fa
|