summaryrefslogtreecommitdiffstats
path: root/src/plugins/linux-cp
AgeCommit message (Collapse)AuthorFilesLines
2022-03-03linux-cp: reflect hw link state on tap on pair creationAlexander Chernavin1-0/+14
Type: fix Currently, a tap interface created to be a member of a linux-cp pair has default link state (down) and default link speed (10Mb/s). Then the plugin monitors the link state of the paired hardware interface and if it changes, the new link state is reflected on the tap interface. And when the new link state is "up", the link speed is also reflected on the tap interface. The problem is that this scheme implies that the hardware interface's link state is "down" at the moment of the linux-cp pair creation and then changes. But there are cases when the link state is already "up" at that moment. If that is the case, the link speed on the tap interface will remain the default one until the link comes down and then comes up. With this fix, when a linux-cp pair is created, reflect current link state of the hardware interface being paired on the created tap interface. Signed-off-by: Alexander Chernavin <achernavin@netgate.com> Change-Id: I73664d753f4daaa6d439c9ca898fb7363d21c06d
2022-03-02linux-cp: lcp fib fixesVladimir Ratnikov1-5/+6
Some possible side effects for multicast routes appears to be in lcp_router_table_add_or_lock. so ff00/8 route will be processed for ospf purposes the right way Ignore IPv6 kernel routes Skip adding auto routes into FIB Type: fix Signed-off-by: Vladimir Ratnikov <vratnikov@netgate.com> Change-Id: I35f73d629a7fffca7f7d4547adc2549b72c2048f
2022-02-22linux-cp: Only enable/disable the punt feature on the 0<->1 transitionNeale Ranns1-9/+14
Type: fix otherwise the feature is enabled n times for n lcp-pairs and the packets go n times through the feature. Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: I8e47e4a293d6e2711f54aa09e9545e5e07728026
2022-01-30linux-cp: check if libmnl headers are presentFlorin Coras1-0/+6
Type: improvement Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: Icb86be8b37fa821f05300ee4415065ca96425fcb
2022-01-28linux-cp: Fix coverity issuePim van Pelt1-1/+1
Type: fix Possible negative return in open(), do not use curr_ns_fd if it is negative. Addresses Coverity issue 248535 Signed-off-by: Pim van Pelt <pim@ipng.nl> Change-Id: I8429ede0f1fe9fe6619e3c4dbd83adb620ea62c2
2022-01-28linux-cp: Linux Control Plane Netlink ListenerNeale Ranns8-16/+1768
Type: feature please see FEATURE.yaml for details. Signed-off-by: Neale Ranns <nranns@cisco.com> Signed-off-by: Matthew Smith <mgsmith@netgate.com> Signed-off-by: Jon Loeliger <jdl@netgate.com> Signed-off-by: Pim van Pelt <pim@ipng.nl> Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: I6255fd9953d0b03e6b4fe75b67a6845a7c206f74 Signed-off-by: Pim van Pelt <pim@ipng.nl>
2022-01-18linux-cp: fix possible null derefPim van Pelt1-0/+2
Found by coverity as defect id 243763 Signed-off-by: Pim van Pelt <pim@ipng.nl> Type: fix Change-Id: Idbada5528a1f2625f6498072d538edf306268b6d
2022-01-11linux-cp: Add VPP->Linux synchronizationPim van Pelt7-166/+697
Part 1 -- notes in https://ipng.ch/s/articles/2021/08/13/vpp-2.html Add the ability for VPP to copy out (sync) its state from the dataplane to Linux Interface Pairs, when they exist. Gated by a configuration flag (linux-cp { lcp-sync }), and by a CLI option to toggle on/off, synchronize the following events: - Interface state changes - Interface MTU changes - Interface IPv4/IPv6 address add/deletion In VPP, subints can have any link state and MTU, orthogonal to their phy. In Linux, setting admin-down on a phy forces its children to be down as well. Also, in Linux, MTU of children must not exceed that of the phy. Add a state synchronizer which walks over phy+subints to ensure Linux and VPP end up in the same consistent state. Part 2 -- notes in https://ipng.ch/s/articles/2021/08/15/vpp-3.html Add the ability for VPP to autocreate sub-interfaces of existing Linux Interface pairs. Gated by a configuration flag (linux-cp { lcp-auto-subint }), and by a CLI option to toggle on/off, synchronize the following event: - Sub-interface creation (dot1q, dot1ad, QinQ and QinAD) A few other changes: - Add two functions into netlink.[ch] to delete ip4 and ip6 addresses. - Remove a spurious logline (printing MTU) in netlink.c. - Resolve a TODO around vnet_sw_interface_supports_addressing() Type: improvement Signed-off-by: Pim van Pelt <pim@ipng.nl> Change-Id: I34fc070e80af4013be58d7a8cbf64296cc760e4e Signed-off-by: Pim van Pelt <pim@ipng.nl>
2022-01-06tap: add num_tx_queues APINathan Skrzypczak1-0/+1
This adds a create_tap_v3 api that has a num_tx_queues parameter allowing to create more than num_workers queues, following on multi TX support Type: feature Change-Id: Idce433147e8dd165f842241d6c76e041e1b1c9b8 Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
2021-11-26api: add helper macros for native endianMohsin Kazmi1-10/+2
Type: improvement Change-Id: Ifa074dfd337f9cd68858468d34abf641fe7f247f Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2021-11-03linux-cp: Cleanup any existing pairs when an interface is deletedNeale Ranns1-0/+17
Type: fix This only happens when the user deletes the physical before they delete the pair, that's not supoosed to be the case, but don't crash if it is. Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: I8c2317b360d897775dde23833d04430f88531cbd
2021-09-09linux-cp: fix non-NULL terminated stringBenoît Ganne1-1/+1
lip->lip_host_name is a non-NULL terminated vector. Type: fix Change-Id: Ic154ad7f57f0b507204e55f78995cc0e89132e57 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2021-09-09linux-cp: Complete interface creation logicPim van Pelt6-86/+268
Linux Control Plane interface creation logic is currently only able to create untagged interfaces, and dot1q VLAN sub-interfaces. This change makes it possible to create dot1ad VLAN sub-ints, and Q-in-AD as well as Q-in-Q sub-interfaces as well. It makes the plugin a bit more robust by catching a few common errors, such as creating an lcp on a sub-interface without its parent having one, and creating an lcp on a sub-interface that is not exact-match. This change has a bunch of smaller improvemnets as well. I documented my work in this post: https://ipng.ch/s/articles/2021/08/12/vpp-1.html It shows that after the change is merged, all VPP interface types now create and operate cleanly as LCP interfaces as well. Type: improvement Signed-off-by: Pim van Pelt <pim@ipng.nl> Change-Id: I322669f7316d44c227090b83d6a574fb9c00e76a
2021-09-08linux-cp: fix crash on failed vlib_buffer_copyPim van Pelt1-12/+24
Type: fix Signed-off-by: Pim van Pelt <pim@ipng.nl> Change-Id: I390282ecc63600728cf11413510c0169178e305c
2021-07-22vppinfra: add abstract socket & netns fnsNathan Skrzypczak1-23/+10
* Add clib_socket_init support for abstract sockets if name starts with an '@' * Add clib_socket_init_netns to open socket in netns * Add clib_netns_open Type: feature Change-Id: I89637ad657c702ec38ddecb5c03a1673d0dfb104 Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
2021-07-15linux-cp: clear all db entries when deleting a pairSergio Gonzalez Monroy1-1/+2
Type: fix Change-Id: I5677cbb183b10c974a3a2e569d1a7a525a7eb45d Signed-off-by: Sergio Gonzalez Monroy <sgmonroy@gmail.com>
2021-06-24linux-cp: stop managing adjacencies for tunnelsAlexander Chernavin1-0/+12
Type: fix Outbound packets which arrive on tun/L3 interfaces use a default adjacency for the interface & address family from the corresponding interface pair. However, there are entries in the linux-cp adj table that are created for them. Managing these entries might cause a segfault because the rewrite data might exceed the reserved space for it of 28 bytes in the linux-cp adj key (e.g. in case of GRE IPv6). With this change, stop creating adjacencies for tun/L3 interfaces in the linux-cp adj table and delegating them. Signed-off-by: Alexander Chernavin <achernavin@netgate.com> Change-Id: I4bcd685860053ab87c65064c182e3ed53fd4fae9
2021-06-24linux-cp: add callbacks for pair managementMatthew Smith2-15/+41
Type: improvement Allow callbacks to be registered which will be called when an interface pair is added or deleted. Change-Id: I1c413ac2ada802021f9e56e2f878ce67e5eda2f5 Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2021-06-03linux-cp: use default adjacencyMatthew Smith1-21/+16
Type: fix Outbound packets from the host have an adjacency lookup performed so buffer metadata can be filled in and output features can be applied. If no adjacency is found for a packet, it gets dropped. This breaks DHCP and possibly other things since the DHCP reply to a discover request is sent to a destination MAC address that is determined by the contents of the request packet rather than any existing neighbor table entry. If adjacency lookup for outbound packets does not find an entry, use the default adjacency for the interface & address family. Change-Id: Ia53a4df3a5bad2991768cfe4a84c560b879e656f Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2021-05-25linux-cp: A V2 variant of pair create API that returns the hostNeale Ranns5-22/+88
interface created Type: improvement Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: I31a83cd50513078895078bae3ae11372d351ddcd
2021-05-21linux-cp: Add delegate to adjacenciesMatthew Smith1-10/+74
Type: improvement When an adjacency is created, add the linux-cp delegate on the new adjacency so we can later deal with modifications & deletions in our cache of adjacency data. Add a pool of hash keys and associate the pool index for a particular key with the adj_delegate_t. If the rewrite on an adjacency is changed, this will allow us to delete the old hash table entry and it will not become orphaned. Signed-off-by: Matthew Smith <mgsmith@netgate.com> Change-Id: I072b960c02cf377d66f7d18b8c0e9e05824a0ca3
2021-05-13tests: move test source to vpp/testDave Wallace1-174/+0
- Generate copyright year and version instead of using hard-coded data Type: refactor Signed-off-by: Dave Wallace <dwallacelf@gmail.com> Change-Id: I6058f5025323b3aa483f5df4a2c4371e27b5914e
2021-04-30build: declare some CMake variables as advancedDamjan Marion1-1/+1
Type: make Change-Id: I780c1c81a50cb92bc89c05856efd8ef88479c0ab Signed-off-by: Damjan Marion <damarion@cisco.com>
2021-03-15tests: use socket transport instead of shared memoryOle Troan1-2/+2
Type: improvement Signed-off-by: Ole Troan <ot@cisco.com> Change-Id: I9e65c94a5a05047a5104e9361ea36eac77b40442 Signed-off-by: Ole Troan <ot@cisco.com>
2021-02-25linux-cp: fix vector-used-a-C-string overflowBenoît Ganne2-4/+3
lip_host_name is a non-NULL terminated vector, not a NULL-terminated C-string. Type: fix Change-Id: Ie5da59bc5680be72251904467d77b18263c882f8 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2021-02-17linux-cp: fix coverity defectMatthew Smith1-0/+6
Type: fix If no host interface name is passed to the CLI command which creates an interface pair, NULL gets passed to lcp_itf_pair_create() and a seg fault occurs. Check whether a host interface name was provided and fail gracefully if none was given. Change-Id: I82886f4c2ee710e206c751c34a74399112e9062c Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2021-02-04linux-cp: Linux Interface Mirroring for Control Plane IntegrationNeale Ranns15-0/+3555
Type: feature please see FEATURE.yaml for details. Signed-off-by: Neale Ranns <nranns@cisco.com> Signed-off-by: Matthew Smith <mgsmith@netgate.com> Signed-off-by: Jon Loeliger <jdl@netgate.com> Signed-off-by: Pim van Pelt <pim@ipng.nl> Change-Id: I04a45c15c0838906aa787e06660fa29f39f755fa