aboutsummaryrefslogtreecommitdiffstats
path: root/src/plugins/memif/memif.c
AgeCommit message (Collapse)AuthorFilesLines
2018-10-23Numa-aware, growable physical memory allocator (pmalloc)Damjan Marion1-5/+5
Change-Id: Ic4c46bc733afae8bf0d8146623ed15633928de30 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-10-23c11 safe string handling supportDave Barach1-7/+7
Change-Id: Ied34720ca5a6e6e717eea4e86003e854031b6eab Signed-off-by: Dave Barach <dave@barachs.net>
2018-10-09memif: coverity fixJakub Grajciar1-2/+4
Change-Id: I2b14e2a035a37b04816aac1e610146be58ad1e92 Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
2018-10-08memif: socket filename add/del bugfixJakub Grajciar1-3/+3
Check access rights using effective user/group IDs Change-Id: I3683258c24bcd7817024bffbd56b54b2f596fdd7 Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
2018-10-03memif: include interface name in logsJuraj Sloboda1-18/+15
Change-Id: I67f58aa93c721dbd518cc2ddcea330006693662f Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
2018-10-03VPP-1440: clean up coverity warningsDave Barach1-2/+2
Change-Id: Ie315d4e83c0575d82aee0369ef50e8dd2dad6a2a Signed-off-by: Dave Barach <dave@barachs.net>
2018-09-24Trivial: Clean up some typos.Paul Vinciguerra1-1/+1
Change-Id: I085615fde1f966490f30ed5d32017b8b088cfd59 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2018-07-31memif: socket filename fixJakub Grajciar1-11/+19
create runtime dir when adding default socket filename. Change-Id: Iad7e751fcab7ce773e0907302414a06ea44dd6cd Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
2018-07-25VPP-1332 memif: add/del socket filename bugfixJakub Grajciar1-1/+27
in case of relative path, create subdirs inside runtime dir. in case of absolute path, if folder does not exist return error. Change-Id: I01fe018102c69deb105160cfa18b741541d76c82 Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
2018-05-25memif: Add support for loggingJakub Grajciar1-22/+61
Change-Id: I0fe60a639c7589dc842d85db092c81c1a7441cb7 Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
2018-04-04memif: zero copy slaveDamjan Marion1-103/+157
Change-Id: I65306fb1f8e39221dd1d8c00737a7fb1c0129ba8 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-03-22memif: version 2Damjan Marion1-6/+33
In version 1 of the protocol sender was always ring producer and receiver was consumer. In version 2 slave is always producer, and in case of master-to-slave rings, slave is responsible for populating ring with empty buffers. As this is major change, we need to bump version number. In addition, descriptor size is reduced to 16 bytes. This change allows zero-copy-slave operation (to be privided in the separate patch). Change-Id: I02115d232f455ffc05c0bd247f7d03f47252cfaf Signed-off-by: Damjan Marion <damarion@cisco.com> Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
2018-02-09memif: fix crash caused by zero pkt len in memif and clear dirty cache while ↵Chun Li1-6/+11
interface reconnect. Change-Id: Ifc7eb2494a22c334d8899422545fca1a4bba4d05 Signed-off-by: Chun Li <chunl2@cisco.com>
2018-02-06vlib: epoll on worker threadsDamjan Marion1-0/+7
This patch teaches worer threads to sleep and to be waken up by kernel if there is activity on file desctiptors assigned to that thread. It also adds counters to epoll file descriptors and new debug cli 'show unix file'. Change-Id: Iaf67869f4aa88ff5b0a08982e1c08474013107c4 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-01-29memif: Add new API calls to manage memif socket names.Jon Loeliger1-43/+129
New API calls and corresponding CLI commands allow the user to manage the socket filenames for memif connections using: vppctl# create memif id <u32> filename <socket-filename> vppctl# delete memif id <u32> and then referencing it later in a memif interface: vppctl# create memif <u32> socket-id <id> mode <mode> <master|slave> ... Corresponding VAT cli entries have also been added. The default memif socket file at id 0 are still always present. The existing memif create/delete CLI commands have been slightly altered into the new syntax: vppctl# create interface memif ... vppctl# delete interface memif ... Change-Id: If2bdc7eac3d81e1d9011a5869747e52fc5e11639 Signed-off-by: Jon Loeliger <jdl@netgate.com> Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-11-09memif: use clib_socket_t for socket connectionsDamjan Marion1-70/+55
This reverts commit 590acf8fa7af6a8604edd72a32f9f087be52c767. new version includes minor fix for the crash when the interface is deleted. Change-Id: I8fc56eb9145e4d8e1d410206f84e705045898608 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-10-04memif: crash on slave modeSteven1-0/+1
Crash was seen on recent image with this BT on top of the stack (gdb) bt full (mif=0x7fffb6226568) at /vpp/build-data/../src/plugins/memif/memif.c:297 ring = 0x0 <<<<<<<<<< i = 0 j = 0 buffer_offset = 65792 r = 0x7fffb5e59f80 alloc = {flags = 1, name = 0x7fffb449f965 "memif region", size = 4260096, numa_node = 0, addr = 0x7fff41dac000, fd = 11, log2_page_size = 12, n_pages = 1041} err = 0x0 __FUNCTION__ = "memif_init_regions_and_queues" The crash happened at this line. ring = memif_get_ring (mif, MEMIF_RING_S2M, i); ring=>head = ring->tail = 0; <===== Please note that the crash is caused by dereferencing NULL rinng. Put breakpoint into the function. I notice that mif->regions[0].shm is not initialized. (gdb) p mif->regions[0].shm $8 = (void *) 0x0 It looks like we forgot to set shm after clib_mem_vm_ext_alloc(). Add the missing cide and the crash is fixed. Change-Id: Ib722a6c241c77acfa8e33962106b57faa50e1ea7 Signed-off-by: Steven <sluong@cisco.com>
2017-09-15vppinfra: add clib_mem_vm_ext_alloc functionDamjan Marion1-11/+10
Change-Id: Iff33694fc42cc3bcc73cf1372339053a6365039c Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-09-09move unix_file_* code to vppinfraDamjan Marion1-18/+18
This will allow us to use this code in client libraries without vlib. Change-Id: I8557b752496841ba588aa36b6082cbe2cd1867fe Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-09-08vlib: move linux-specific code to vlib/linuxDamjan Marion1-0/+1
Change-Id: Id79d2c2be7a98e15416a537c890a8f2dd6d4464d Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-09-08memif: fix coverity warnings as of 9/7Steven1-2/+5
1. coverity complains about "buffer not null terminated" for strncpy because we pass the size of the destination to the call which is equal to the true size of the destination. We subtract 1 for the size to accommodate the null like all other places are already doing it. 2. Add a check to tx_queues in memif_interface_tx_inline to avoid "divide by zero". 3. To avoid null pointer dereference in memif_create_if, change the goto done rather than goto error and spit a more meaningful error rather than silent about it. 4. Shuffle a line to avoid "check after use" in vl_api_memif_delete_t_handler. Change-Id: Icba7ecd5362c012a48ac35795d31aab356617420 Signed-off-by: Steven <sluong@cisco.com>
2017-08-24Make VPP runtime directory configurableDamjan Marion1-5/+9
New startup config command: unix { runtime-dir /run/vpp } Also, adds recursive mkdir funtion for use in deifferent places like cli-config socket path and dpdk hugepage directory path. Change-Id: I1446ceab9c220c25804e73a743a3ebb383450124 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-07-10memif: mask interrupts on startup if we are in the polling modeDamjan Marion1-0/+8
Change-Id: Ief02eb1109a1bc463665d9747e9fa4e0c0e3d7e0 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-06-21Introduce default rx mode for device driversDamjan Marion1-1/+1
If interface is down and queues are not configured then we are not able to change rx-mode. This change introducess default mode which is stored per interface and applied if driver wants. Change-Id: I70149c21c1530eafc148d5e4aa03fbee53dec62f Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-06-19memif: add ip modeDamjan Marion1-16/+45
In IP mode memif interface is L3 point-to-point interfaces and we don't pass l2 header. There is no l2 header rewrite operation and received packets are sent straight to ip4-input / ip6-input nodes. Change-Id: I4177f3fce3004da7ecf14d235006ae053fcf3f09 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-06-13memif: fix crash during interface deleteDamjan Marion1-0/+4
Change-Id: Ide6d26d6fcc81be6f26ac0abe2cd0d6a0838cfe6 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-06-12memif: complete refactor of socket handling codeDamjan Marion1-746/+398
Change-Id: I4d41def83a23f13701f1ddcea722d481e4c85cbc Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-06-02memif: fix coverity warningsSteven1-0/+2
Check -1 for return from read prior to using the data Change-Id: Ibab7309244de488737ea7938b334fab495bf855d Signed-off-by: Steven <sluong@cisco.com>
2017-05-31memif: multi-queues supportSteven1-56/+78
- Add rx-queues and tx-queues option to the create memif CLI - Add vlib_worker_thread_barrier_sync () to memif_conn_fd_read_ready () as the latter function may disconnect the ring and clean up the shared memory. - On transmit, write the rid (queue number) to the socket. - On receive, read the rid and trigger the interrupt for the corresponding thread. Change-Id: If1c7e26c7124174678f047909cbc33e931eaac8c Signed-off-by: Steven <sluong@cisco.com>
2017-05-29memif: master instance crashes when typing quit on slaveSteven1-15/+29
When I type in 'quit' on the slave instance, the master instance crashes on this line. 0: /home/sluong/vpp-master/vpp/build-data/../src/vlib/unix/input.c:200 (linux_epoll_input) assertion `! pool_is_free (um->file_pool, _e)' fails Aborted (core dumped) Below is the decode from gdb line_number=0, fmt=0x7f57af6cc9a0 "%s:%d (%s) assertion `%s' fails") at /home/sluong/vpp-master/vpp/build-data/../src/vppinfra/error.c:143 vm=0x7f57af8e2400 <vlib_global_main>, node=0x7f576d40ad80, frame=0x0) at /home/sluong/vpp-master/vpp/build-data/../src/vlib/unix/input.c:200 vm=0x7f57af8e2400 <vlib_global_main>, node=0x7f576d40ad80, type=VLIB_NODE_TYPE_PRE_INPUT, dispatch_state=VLIB_NODE_STATE_POLLING, frame=0x0, last_time_stamp=1525665215050617) at /home/sluong/vpp-master/vpp/build-data/../src/vlib/main.c:1016 vm=0x7f57af8e2400 <vlib_global_main>, is_main=1) at /home/sluong/vpp-master/vpp/build-data/../src/vlib/main.c:1500 I am able to reproduce the problem consistently with the below procedure. 1. Create 3 memif interfaces between slave and master instances. 2. Type 'quit' on the slave. Neither crashes the first time. 3. Bring back the slave. Type 'quit' on the master. Neither crashes. 4. Bring back the master. Type 'quit' on the slave. The master crashes. There are two places the interrupt line is disconnected and the unix file is removed via the call unix_file_del () 1. memif_int_fd_read_ready () 2. memif_disconnect () which is called via multiple places in memif. When the crash happens, the unix file was removed from memif_disconnect () via memif_conn_fd_read_ready () with size of the message == 0 in recvmsg (). It is noted when the unix file was removed from memif_int_fd_read_ready (), it never crashes. It is a race condition. However, if I follow the aformentioned procedure, the crash always happens. The reason the crash happens when memif_disconnect () removes the unix file is because there may still be pending input in linux_epoll_input (). When linux_epoll_input () tries to access the unix file via the line 200 unix_file_t *f = pool_elt_at_index (um->file_pool, i); it crashes. We could add code in linux_epoll_input () to avoid the crash if the index for the particular file_pool is already free. Or we could fix memif to not remove the unix file in memif_conn_fd_read_ready () when recvmsg () got 0 byte and just postpone the unix file deletion in memif_int_fd_read_ready () later after linux_epoll_input () got a chance to run to empty the input stream. I choose to fix the problem in the latter approach. I split the function memif_disconnect () into two parts. For the code path which memif_conn_fd_read_ready () calls memif_disconnect (), it does not remove the unix file. All other calls to memif_disconnect () will continue to do what it uses to do to avoid regression. Please let me know if I should fix the problem other way. Change-Id: I8efe2a3d24c6581609bc7b6fe82c2b59c22d8e4b Signed-off-by: Steven <sluong@cisco.com>
2017-05-15memif: migrate memif to use vnet device infra APIsSteven1-2/+20
Migrate memif to use vnet device infra APIs. No new function is added. Change-Id: I70e440d2ae1e673876365041f31fe78997aceecf Signed-off-by: Steven <sluong@cisco.com>
2017-04-20Temporary workaround for the bug VPP-698.Milan Lenco1-2/+2
Change-Id: I220b0b95449f24cc547206e38ab8e10019115ec0 Signed-off-by: Milan Lenco <milan.lenco@pantheon.tech>
2017-04-05Fix two more memif coverity issuesMilan Lenco1-1/+12
Change-Id: I935620798d6fe82b99b6bd564749e20a189b4ae3 Signed-off-by: Milan Lenco <milan.lenco@pantheon.tech>
2017-04-03Fix memif coverity issuesMilan Lenco1-6/+20
Change-Id: I844ec53b55ceaa1e00996f5cf8a018537ea8b481 Signed-off-by: Milan Lenco <milan.lenco@pantheon.tech>
2017-03-30vppinfra: add spinlock inline functionsDamjan Marion1-10/+2
Change-Id: I86089e9bb604adfc260a111685001be1c897ce53 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-03-22Add memif - packet memory interface for intra-host communicationDamjan Marion1-0/+1045
Change-Id: I94c06b07a39f07ceba87bf3e7fcfc70e43231e8a Signed-off-by: Damjan Marion <damarion@cisco.com> Co-Authored-By: Milan Lenco <Milan.Lenco@pantheon.tech>