aboutsummaryrefslogtreecommitdiffstats
path: root/src/plugins/memif/node.c
AgeCommit message (Collapse)AuthorFilesLines
2018-11-20memif input-node improvementsDamjan Marion1-11/+34
Change-Id: Ida2262238c0558d8340f05c678a84e76f990935d Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-11-14Remove c-11 memcpy checks from perf-critical codeDave Barach1-16/+16
Change-Id: Id4f37f5d4a03160572954a416efa1ef9b3d79ad1 Signed-off-by: Dave Barach <dave@barachs.net>
2018-10-23c11 safe string handling supportDave Barach1-1/+1
Change-Id: Ied34720ca5a6e6e717eea4e86003e854031b6eab Signed-off-by: Dave Barach <dave@barachs.net>
2018-08-13Multiarch handling in different constructor macrosDamjan Marion1-2/+0
This significantly reduces need for ... in multiarch code. Simply constructor macros will jost create static unused entry if CLIB_MARCH_VARIANT is defined and that will be optimized out by compiler. Change-Id: I17d1c4ac0c903adcfadaa4a07de1b854c7ab14ac Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-07-17memif: vectorized buffer enqueue in input nodeDamjan Marion1-146/+121
Change-Id: If6970788396c85415634f12304f49eed0d812281 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-07-11avoid using thread local storage for thread indexDamjan Marion1-2/+2
It is cheaper to get thread index from vlib_main_t if available... Change-Id: I4582e160d06d9d7fccdc54271912f0635da79b50 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-05-29Add VLIB_NODE_FN() macro to simplify multiversioning of node functionsDamjan Marion1-20/+5
Change-Id: Ibab5e27277f618ceb2d543b9d6a1a5f191e7d1db Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-04-05memif: bug fixesDamjan Marion1-21/+72
Change-Id: Id775efb2e85d850e510d00f1b48bb711a3342397 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-04-04memif: zero copy slaveDamjan Marion1-5/+327
Change-Id: I65306fb1f8e39221dd1d8c00737a7fb1c0129ba8 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-03-22memif: version 2Damjan Marion1-359/+326
In version 1 of the protocol sender was always ring producer and receiver was consumer. In version 2 slave is always producer, and in case of master-to-slave rings, slave is responsible for populating ring with empty buffers. As this is major change, we need to bump version number. In addition, descriptor size is reduced to 16 bytes. This change allows zero-copy-slave operation (to be privided in the separate patch). Change-Id: I02115d232f455ffc05c0bd247f7d03f47252cfaf Signed-off-by: Damjan Marion <damarion@cisco.com> Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
2018-02-09memif: fix crash caused by zero pkt len in memif and clear dirty cache while ↵Chun Li1-2/+80
interface reconnect. Change-Id: Ifc7eb2494a22c334d8899422545fca1a4bba4d05 Signed-off-by: Chun Li <chunl2@cisco.com>
2017-11-23memif: fix input node multiversion constructorDamjan Marion1-6/+6
Change-Id: I498ed1162eadf3eff2543f1ec02a9b1e5fdc05d8 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-11-23memif: multiversioningDamjan Marion1-6/+22
Change-Id: I881551e6c13503a71ae29a7a58bde4d193745d55 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-11-08memif: do not mask head and tail pointersDamjan Marion1-32/+15
Change-Id: Ie849ab713ff086187c18a91ab32e58207fe94033 Signed-off-by: Damjan Marion <damarion@cisco.com> Signed-off-by: Jakub Grajciar <Jakub.Grajciar@pantheon.tech>
2017-10-04[aarch64] Fixes CLI crashes on dpaa2 platform.Christophe Fontaine1-1/+1
- always use 'va_args' as pointer in all format_* functions - u32 for all 'indent' params as it's declaration was inconsistent Change-Id: Ic5799309a6b104c9b50fec309cba789c8da99e79 Signed-off-by: Christophe Fontaine <christophe.fontaine@enea.com>
2017-06-19memif: add ip modeDamjan Marion1-18/+82
In IP mode memif interface is L3 point-to-point interfaces and we don't pass l2 header. There is no l2 header rewrite operation and received packets are sent straight to ip4-input / ip6-input nodes. Change-Id: I4177f3fce3004da7ecf14d235006ae053fcf3f09 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-06-16memif: jumbo frames supportSteven1-109/+201
Current memif interface supports frame size up to 2048. This patch is to enhance memif to support jumbo frames. On tx (writing buffers to the ring), keep reading the next buffer in vlib when the flag VLIB_BUFFER_NEXT_PRESENT and merge it to the same ring entry. Use descriptor chaining if the buffer is not big enough. On rx (reading buffers from the ring), if the packet is greater than 2048, create multiple vlib buffers, chained with the VLIB_BUFFER_NEXT_PRESENT. Testing: Because the ping command provided by VPP does not support jumbo frames, I have to use linux ping. Here is the set up that I use for testing. VM1 --- vhost ---- VPP1 --- memif --- VPP2 --- vhost --- VM2 Create vhost-user interfaces between VM1 and VPP1 and between VPP2 and VM2 VM configuration: Set the interface mtu on the VM, e.g 9216 to support jumbo frames. create static route and static arp on VM1 to VM2 and vice versa. Use iperf3 or ping -s 8000 from VM1 to VM2 or vice versa. Sample run sluong@ubuntu:~$ ping 131.1.1.1 -c1 -s 8000 ping 131.1.1.1 -c1 -s 8000 PING 131.1.1.1 (131.1.1.1) 8000(8028) bytes of data. 8008 bytes from 131.1.1.1: icmp_seq=1 ttl=62 time=0.835 ms --- 131.1.1.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.835/0.835/0.835/0.000 ms sluong@ubuntu:~$ DBGvpp# sh interface memif0 Name Idx State Counter Count memif0 1 up rx packets 1 rx bytes 8042 tx packets 1 tx bytes 8042 ip4 1 DBGvpp# Change-Id: I469bece3d45a790dceaee1d6a8e976bd018feee2 Signed-off-by: Steven <sluong@cisco.com>
2017-06-12memif: complete refactor of socket handling codeDamjan Marion1-41/+42
Change-Id: I4d41def83a23f13701f1ddcea722d481e4c85cbc Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-05-31memif: multi-queues supportSteven1-11/+7
- Add rx-queues and tx-queues option to the create memif CLI - Add vlib_worker_thread_barrier_sync () to memif_conn_fd_read_ready () as the latter function may disconnect the ring and clean up the shared memory. - On transmit, write the rid (queue number) to the socket. - On receive, read the rid and trigger the interrupt for the corresponding thread. Change-Id: If1c7e26c7124174678f047909cbc33e931eaac8c Signed-off-by: Steven <sluong@cisco.com>
2017-05-15memif: migrate memif to use vnet device infra APIsSteven1-20/+20
Migrate memif to use vnet device infra APIs. No new function is added. Change-Id: I70e440d2ae1e673876365041f31fe78997aceecf Signed-off-by: Steven <sluong@cisco.com>
2017-04-06Use thread local storage for thread indexDamjan Marion1-17/+18
This patch deprecates stack-based thread identification, Also removes requirement that thread stacks are adjacent. Finally, possibly annoying for some folks, it renames all occurences of cpu_index and cpu_number with thread index. Using word "cpu" is misleading here as thread can be migrated ti different CPU, and also it is not related to linux cpu index. Change-Id: I68cdaf661e701d2336fc953dcb9978d10a70f7c1 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-04-05Fix two more memif coverity issuesMilan Lenco1-24/+20
Change-Id: I935620798d6fe82b99b6bd564749e20a189b4ae3 Signed-off-by: Milan Lenco <milan.lenco@pantheon.tech>
2017-03-22Add memif - packet memory interface for intra-host communicationDamjan Marion1-0/+383
Change-Id: I94c06b07a39f07ceba87bf3e7fcfc70e43231e8a Signed-off-by: Damjan Marion <damarion@cisco.com> Co-Authored-By: Milan Lenco <Milan.Lenco@pantheon.tech>