summaryrefslogtreecommitdiffstats
path: root/src/plugins/memif
AgeCommit message (Collapse)AuthorFilesLines
2021-05-20memif: fix input node buffer prefetchTianyu Li1-4/+4
Prefetch should be the next group of buffers instead of current buffers Type: fix Signed-off-by: Tianyu Li <tianyu.li@arm.com> Change-Id: If13967e27f74c10856ae48892420d7ade6f0c92c
2021-05-19memif: remove dead codeDamjan Marion1-1/+1
Type: fix Change-Id: I6fce8c1f91fc5080271c1832bf40a9fb6bbcb7e3 Signed-off-by: Damjan Marion <damarion@cisco.com>
2021-05-17memif: remove unused codeDamjan Marion1-46/+13
Type: refactor Change-Id: I127b8c7131fd993a5fe605c7c36cc1d0b6672984 Signed-off-by: Damjan Marion <damarion@cisco.com>
2021-05-17memif: remove duplicate code in txDamjan Marion1-53/+39
Type: refactor Change-Id: Idb82e28ee2e370ae8fc1becc2f8b92a548bc6b1b Signed-off-by: Damjan Marion <damarion@cisco.com>
2021-05-17memif: optimize zero-copy rx ring refillDamjan Marion2-65/+47
Type: improvement Change-Id: I8169da230eb5f74651810a8e2490895620c38269 Signed-off-by: Damjan Marion <damarion@cisco.com>
2021-05-17memif: fix "remove barriers" commitDamjan Marion1-2/+2
Type: fix Change-Id: I60bb0261c05bf7e25ca01c72780f1cd77fde7a9a Signed-off-by: Damjan Marion <damarion@cisco.com>
2021-05-17memif: remove barriersDamjan Marion2-22/+33
Type: improvement Change-Id: Idef30aee80b654ce424b6f1f1f730574ca68874c Signed-off-by: Damjan Marion <damarion@cisco.com>
2021-05-13tests: move test source to vpp/testDave Wallace2-448/+0
- Generate copyright year and version instead of using hard-coded data Type: refactor Signed-off-by: Dave Wallace <dwallacelf@gmail.com> Change-Id: I6058f5025323b3aa483f5df4a2c4371e27b5914e
2021-05-08memif: Fix delete on errorNathan Skrzypczak1-8/+0
Type: fix Change-Id: I3cc09630cae999cc194a0eedb4d2cfee7a826b76 Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
2021-05-06vlib: rename vl_counter_t to vlib_error_desc_tOle Troan2-2/+2
Type: improvement Signed-off-by: Ole Troan <ot@cisco.com> Change-Id: I368b0410db2d633d3c52199c840e24d21952c1b4
2021-05-06memif: add severity to countersOle Troan2-14/+14
Also rename counters in stat segment to make them more filesystem friendly. Type: improvement Signed-off-by: Ole Troan <ot@cisco.com> Change-Id: I8a3f3ec318931f5475fcb181f8b4a079a1fa4b9c Signed-off-by: Ole Troan <ot@cisco.com>
2021-05-01vlib: refactor trajectory trace debug featureBenoît Ganne1-2/+0
trajectory trace has been broken for a while because we used to save the buffer trajectory in a vector pointed to in opaque2. This does not work well when opaque2 is copied (eg. because of a clone) as 2 buffers end up sharing the same vector. This dedicates a full cacheline in the buffer metadata instead when trajectory is compiled in. No dynamic allocation, no sharing, no tears. Type: refactor Change-Id: I6a028ca1b48d38f393a36979e5e452c2dd48ad3f Signed-off-by: Benoît Ganne <bganne@cisco.com>
2021-04-18vppinfra: remove linux/syscall.hDamjan Marion1-1/+0
For portabiliy reasons it is better to have all wrapped in clib code. I.e. instead of using getcpu() we have clib_get_current_numa_node () and clib_get_current_cpu_id(). Type: refactor Change-Id: I29b52d7f29bc7f93873402c4070561f564b71c63 Signed-off-by: Damjan Marion <damarion@cisco.com>
2021-04-16tests: cpus awarenessKlement Sekera1-1/+14
Introduce MAX_CPUS parameters to control maximum number of CPUs used by VPP(s) during testing, with default value 'auto' corresponding to all CPUs available. Calculate test CPU requirements by taking into account the number of workers, so a test requires 1 (main thread) + # of worker CPUs. When running tests, keep track of both running test jobs (controlled by TEST_JOBS parameter) and free CPUs. This then causes two limits in the system - to not exceed number of jobs in parallel but also to not exceed number of CPUs available. Skip tests which require more CPUs than are available in system (or more than MAX_CPUS) and print a warning message. Type: improvement Change-Id: Ib8fda54e4c6a36179d64160bb87fbd3a0011762d Signed-off-by: Klement Sekera <ksekera@cisco.com>
2021-04-08memif: Use log_debug for clib_file_add and clib_file_delSteven Luong1-15/+24
It is more appropriate to use log_debug instead of log_warn when inoking clib_file_add and clib_file_del. Type: fix Signed-off-by: Steven Luong <sluong@cisco.com> Change-Id: I544d97037cfca3f22ce94242aef0c7b0fea2fa9b
2021-03-26vlib: introduce vlib_get_main_by_index(), vlib_get_n_threads()Damjan Marion3-4/+4
Type: improvement Change-Id: If3da7d4338470912f37ff1794620418d928fb77f Signed-off-by: Damjan Marion <damarion@cisco.com>
2021-03-19interface: add capabilities flagsMohsin Kazmi1-1/+1
Type: improvement This patch adds flags to represent the modern NICs capabilities. Change-Id: I96d38d9ab7eac55974d72795cd100d8337168e1e Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2021-03-04memif: Validate descriptors within process boudarySteven Luong1-20/+27
We hit a crash when the client sends us a bogus deescriptor which causes us to access memory beyong the mapping. While the client clearly should not do that, it is rather cheap for VPP to validate the descriptor instead of crash and burn. Type: fix Signed-off-by: Steven Luong <sluong@cisco.com> Change-Id: Id09035810939f5f98530f212f0b23e606132251d
2021-01-22tests: add generalized tags for tests, use them for run-solo testsAndrew Yourtchenko1-4/+2
We have accumulated several scenarios in prod or wishlists where it would be useful to have a general infra to say yes/no about a certain test, and potentially make decisions based on that, for example: - runs solo (aka 'time-dependent') - (wishlist) part of quick smoke-test set - (wishlist) intermittent failure unrelated to timing - (wishlist) test broken with a multi-worker config in vpp Refactor the current "run-solo" code to allow for this extension. Type: test Change-Id: Ia5b3810e57c0543753c8e0dc4dc0cfb4a30b36ac Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com> Signed-off-by: Klement Sekera <ksekera@cisco.com>
2021-01-21memif: adapt to new rxq frameworkMohammed Hawari3-61/+59
Change-Id: Ifa8bccd8a34ec1b14e772ee53757e9083373e3de Signed-off-by: Mohammed Hawari <mohammed@hawari.fr> Type: feature
2021-01-20memif: fix vpp to go link up immediately on admin upEd Warnicke3-16/+23
Type: improvement Previously, memif would check every 3 seconds to see if an interface had gone admin up. Now it does as soon as admin up occurs. Signed-off-by: Ed Warnicke <hagbard@gmail.com> Change-Id: I808699cd5980fa162c34ac977f43d00ed6b67115 Signed-off-by: Ed Warnicke <hagbard@gmail.com>
2020-12-14misc: move to new pool_foreach macrosDamjan Marion3-8/+7
Type: refactor Change-Id: Ie67dc579e88132ddb1ee4a34cb69f96920101772 Signed-off-by: Damjan Marion <damarion@cisco.com>
2020-12-04libmemif: clean up typosPaul Vinciguerra4-4/+4
Type: style Change-Id: I0d25d922312dfd60a665916cf47c3d2faa29ea49 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2020-12-03tests: remove py2/py3 six compatability libraryPaul Vinciguerra2-3/+0
Type: test Change-Id: Idb6b8169845e0239e639429ccfd02a683212b7e6 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2020-11-09vlib: fix trace number accountingBenoît Ganne1-8/+11
When using classifier to filter traces, not all packets will be traced. In that case, we should only count traced packets. Type: fix Change-Id: I87d1e217b580ebff8c6ade7860eb43950420ae78 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2020-10-26memif: handle unexpected EPOLLOUT for RX queueSteven Luong1-0/+12
Getting an unexpected EPOLLOUT for RX queue and crashing due to missing callback function on write_function to handle EPOLLOUT. (gdb) f 5 f 5 node=<optimized out>, vm=0x7f948bbe4540 <vlib_global_main>) at /vpp/src/vlib/unix/input.c:325 325 errors[n_errors] = f->write_function (f); (gdb) p *e p *e $21 = {events = 4, data = {ptr = 0x23, fd = 35, u32 = 35, u64 = 35}} (gdb) p file_main.file_pool[e->data.fd] p file_main.file_pool[e->data.fd] $22 = {file_descriptor = 37, flags = 1, polling_thread_index = 0, private_data = 65536, read_function = 0x7f944a87b140 <memif_int_fd_read_ready>, write_function = 0x0, error_function = 0x0, description = 0x7f944be22400 "memif0/1 rx 0 int", read_events = 0, write_events = 1, error_events = 0} (gdb) File descriptors are recycled. It is likely that the EPOLLOUT is meant for the previous owner of the same file descriptor number which memif recycled and memif RX did not expect to receive an EPOLLOUT. For defensive play, we create a dummy callback function to ignore the EPOLLOUT instead of crashing. Type: fix Signed-off-by: Steven Luong <sluong@cisco.com> Change-Id: I535cadbb9b71d3db2995b118c59a12c71f10af09
2020-10-12misc: clang-11 and gcc-10 supportDamjan Marion1-1/+1
clang-11 complains: error: field 'buffer_template' with variable sized type 'vlib_buffer_t' not at the end of a struct or class is a GNU extension [-Werror,-Wgnu-variable-sized-type-not-at-end] Type: improvement Change-Id: I2cb6b4fde723a05b42cf33dd8130df074f0362ab Signed-off-by: Damjan Marion <damarion@cisco.com>
2020-10-08interface: shorten vnet_hw_if_rx_modeDamjan Marion2-5/+5
This is part of bigger refactor. Type: refactor Change-Id: I6fc2c0a1e2d217a70952901bcf775b8485bd3c20 Signed-off-by: Damjan Marion <damarion@cisco.com>
2020-10-02memif: map shared memory with clib_mem_vm_map_shared(...)Damjan Marion1-10/+25
Type: improvement Change-Id: I91031d56aae884a0a42fca343a2fc24c442b1da8 Signed-off-by: Damjan Marion <damarion@cisco.com>
2020-08-27tests: "force solo" testcase supportAndrew Yourtchenko1-0/+4
Some of the tests are time-sensitive, and at present require a non-trivial modification in order to run at high concurrency. Without these modifications, they intermittently fail, and require the test retries. Rather than setting them to the extended tests and forgetting about them, put them into a "solo" set, which gets run in a single-threaded mode after the rest of the tests are done. Mark a few of the tests that showed errors during TEST_JOBS=48 as forced-solo. Also, give a better diagnostic if the testcase misses a docstring needed to represent it in the diagnostic outputs. Type: fix Change-Id: I33fe62eb17edc1885bd2c3523892051d52da6546 Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2020-08-06memif: wrong interface counter is incrementedSteven Luong1-2/+2
vlib_increment_combined_counter takes sw_if_index, not hw_if_index. Type: fix Signed-off-by: Steven Luong <sluong@cisco.com> Change-Id: Iecde2697ed490940f0eff796d28d15381405b895
2020-05-14memif: 14 bytes extra overhead issue fixed.Mrityunjay Kumar1-2/+2
Type: fix Signed-off-by: Mrityunjay Kumar <kumarnitp@gmail.com> Change-Id: I31cc5e853b57e285064647503231b251e5152d3f
2020-02-26api: improve api string safetyJakub Grajciar1-5/+2
- Remove vl_api_from_api_string to prevent use of not nul-terminated strings. - Rename vl_api_from_api_to_vec -> vl_api_from_api_to_new_vec to imply a new vector is created. NOT nul terminated. - Add vl_api_from_api_to_new_c_string. Returns nul terminated string in a new vector. - Add vl_api_c_string_to_api_string. Convert nul terminated string to vl_api_string_t - Add vl_api_vec_to_api_string. Convert NON nul terminated vector to vl_api_string_t Type: fix Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com> Change-Id: Iadd59b612c0d960a34ad0dd07a9d17f56435c6ea Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
2019-12-23tests: vpp_memif fix formatting error in exceptionPaul Vinciguerra1-5/+2
Type: test Change-Id: I2d32797efd1c3478a862b7950ef9ab63428da890 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-12-07lacp: fix control_ping from pluginsOle Troan1-0/+4
Type: fix Signed-off-by: Ole Troan <ot@cisco.com> Change-Id: I030f75234a346ef6a20640c1a0ed65f4934867f2
2019-11-24vppapigen: clean up typos in c generated codePaul Vinciguerra1-1/+1
Type: style Change-Id: Ib8febf8ea83f7ce1aeb93f227d00d3111fbef4ab Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-11-15tests: Remove the unrequired VPP IP address/prefix class wrappersNeale Ranns2-7/+10
Type: refactor Change-Id: I204f3f8eebc5f5d5a377e91262f91c615fd00168 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-10-23memif: memif buffer leaks during disconnecting zero copy interface.Changqian Wang1-0/+36
code added to free the zero copy interface rx/tx queue buffers during disconnecting. As ddc9eb4 find the last official solution introduced core in ut. This does not. Type: fix Signed-off-by: Changqian Wang <changqwa@cisco.com> Change-Id: I971ee164e6d4331a85feb9e65d6702d771c86985
2019-10-18memif: add python3 support to testOle Troan2-20/+13
Committed from SK936 seat 1A. Type: fix Signed-off-by: Ole Troan <ot@cisco.com> Change-Id: I717fafbdb9b8576508d6dd72a7e5653cecebfae0 Signed-off-by: Ole Troan <ot@cisco.com>
2019-10-14memif: Revert "memif buffer leaks during disconnect."Andrew Yourtchenko1-36/+2
This reverts commit d570c4d18df404cb59ef72d20d56f8e31418c8e9. That commit introduced crash into memif make test-debug. To reproduce: "TEST=memif make test-debug". With this commit reverted the make test-debug for memif passes. Type: fix Change-Id: Ic335359e2050bb8a5d530b01c595b081476fa197 Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2019-10-10memif: remove api boilerplateOle Troan6-252/+15
Type: refactor Signed-off-by: Ole Troan <ot@cisco.com> Change-Id: Icab769607c4a5890dc80b8f2661faa7e297c2a27
2019-10-03memif: memif buffer leaks during disconnect.Padma Ram1-2/+36
- code added to release the mbuf's to main pool during memif disconnect. Type: fix Change-Id: I504dacc9a40bc1702831cf3208fd532d1ae68a6f Signed-off-by: Padma Ram <padmaram86.raja@gmail.com>
2019-09-24vlib: add flag to explicitelly mark nodes which can init per-node packet traceDamjan Marion1-0/+1
Type: feature Change-Id: I913f08383ee1c24d610c3d2aac07cef402570e2c Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-09-16api: autogenerate api trace print/endianOle Troan1-0/+4
In addition to the external vppapitrace tool, VPP itself supports dumping of API trace files. In two formats, "custom-dump" and "dump". "dump" gives a human friendly list, and "custom-dump" is meant to give a list of commands that can be fed to VAT. This patch only deals with "dump". Prior to this fix, auto-generation was only done for the basic types. This fix adds support for any type, including lists, and supports pretty-printing of enums, strings, IP addresses, MAC addresses and so on. Usage: api trace dump <api-trace-file> For example Change-Id: I4e485680e6dcfce7489299ae6cf31d835071ac40 ---------- trace 48 ----------- vl_api_sw_interface_set_flags_t: _vl_msg_id: 75 client_index: 0 context: 10 sw_if_index: 1 flags: IF_STATUS_API_FLAG_ADMIN_UP ---------- trace 49 ----------- vl_api_sw_interface_add_del_address_t: _vl_msg_id: 88 client_index: 0 context: 11 sw_if_index: 1 is_add: 1 del_all: 0 prefix: 172.16.1.1/24 ---------- trace 51 ----------- vl_api_cli_inband_t: _vl_msg_id: 819 client_index: 0 context: 13 cmd: packet-generator capture pg0 pcap /tmp/vpp-unittest-TestMAP-YhcmDX/pg0_out.pcap disable ---------- trace 58 ----------- vl_api_ip_neighbor_add_del_t: _vl_msg_id: 199 client_index: 0 context: 20 is_add: 1 neighbor: sw_if_index: 2 flags: IP_API_NEIGHBOR_FLAG_NONE mac_address: 0202.0000.ff02 ip_address: fd01:2::2 Signed-off-by: Ole Troan <ot@cisco.com> Change-Id: I5556d06008de2762e7c2d35a8b0963ae670b3db1 Type: fix Signed-off-by: Ole Troan <ot@cisco.com> Signed-off-by: Ole Troan <ot@cisco.com> Signed-off-by: Ole Troan <ot@cisco.com> Signed-off-by: Ole Troan <ot@cisco.com> Signed-off-by: Ole Troan <ot@cisco.com> Signed-off-by: Ole Troan <ot@cisco.com> Signed-off-by: Ole Troan <ot@cisco.com> Signed-off-by: Ole Troan <ot@cisco.com>
2019-09-11memif: fix zero-copy arg overwriteJakub Grajciar1-3/+0
Type: fix Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com> Change-Id: I9a34465c85597baecdbc672ce395265f7dbb7f00
2019-09-09memif: API cleanupJakub Grajciar6-67/+122
Use consistent API types. memif_create now enables zero-copy by default. Add no_zero_copy param to memif_create which if set, disables zero copy. Type: refactor Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com> Change-Id: I11df8b9212c40de179ee71dc9da14039b982ede5 Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
2019-09-04memif: always enable zero-copy when creating memif using APIJakub Grajciar1-0/+3
Type: fix Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com> Change-Id: I823b6297e1d2bdd438633ec7b877960e6d8423fa
2019-08-22tests: move plugin tests to src/plugins/*/testDave Wallace2-0/+430
- Relocate plugin tests for 'make test' into src/plugins/*/test so that plugin test cases are co-located with the plugin source code. Type: refactor Signed-off-by: Dave Wallace <dwallacelf@gmail.com> Change-Id: I503e6a43528e14981799b735fa65674155713f67 Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2019-07-25memif: Fix uninitialized variable as reported by coveritySteven Luong1-1/+2
When mode == ip, the variable next_index is not initialized. Although insde the while loop, ni will be fixed to contain next[0], it is easier to initialize it. Type: fix Change-Id: I6653a958bbc5105e7266bf89e3c8569ff00f0199 Signed-off-by: Steven Luong <sluong@cisco.com>
2019-07-24memif: fix vector overflow when copying stringsBenoît Ganne1-19/+27
When memif sends back socket messages containing strings, we copy vectors into C-string. Unfortunately, most vectors are not null-terminated, causing strncpy() read overflow. Moreover, strncpy() does not null-terminate string in case of max length reached. This patch introduces helpers to safely copy strings from vectors. Type: fix Fixes: d6042d4f1ea0baf02bc87c72960a331a9e08dfab Change-Id: I38489ec8d2a5d4a42b9abde1aa3dfdbd06ebe024 Signed-off-by: Benoît Ganne <bganne@cisco.com>