Age | Commit message (Collapse) | Author | Files | Lines |
|
lport and eport in Cli "nat44 add load-balancing static mapping" should hton()
Type: fix
Signed-off-by: Wei Li <realbaseball2008@gmail.com>
Change-Id: I2eadb7e341efb70cc406e10b3b189e5ebff09ff4
|
|
The unformat type for "%d" should be u32 or int.
Type: fix
Signed-off-by: Ted Chen <znscnchen@gmail.com>
Change-Id: I2483df6259ed8d3c7648c8db6345e5063ac8b57e
|
|
Two similar CLI paths "nat44" and "nat44 add interface address"
caused unexpected behavior. If "nat44 add interface address"
command would fail the vlib cli processing function would
call "nat44" handler. This would also clean any previously
set errors from the first command and basically return
same error returned by "nat44" handler for every failed
command that starts with the same path string.
Fixes nat44-ed and nat44-ei plugin.
Change-Id: I1aac85c8ae2932da582a2b78243521d1bf8a0653
Ticket: VPP-2021
Type: fix
Signed-off-by: Filip Varga <fivarga@cisco.com>
|
|
This patch affects how destination fib is choosen during session
creation. Default behavior of choosing fib based on output
interfaces is kept.
Configuration gives you the ability to change default behavior
to direct or restrict traffic between different FIB tables.
NAT specific VRF routing options:
a) keeping communication in the same VRF
b) option to add multiple destination VRFs
c) option to control the resolution order of destination VRFs
TX FIB resolution is based on looking up RX FIB entry in NATs
VRF table and picking the first FIB that resolves
destination address.
Ticket: VPP-2009
Type: improvement
Change-Id: If500c48d7ce3466533ad9581c0847870788fc4fb
Signed-off-by: Filip Varga <fivarga@cisco.com>
|
|
Implement proper state machine based on above RFCs. ACKs to SYNs/FINs
are no longer required/tracked. This is more friendly to peers and
accounts for lost packets and retransmits.
This change also means that all traffic is translated and forwarded
while in transitory timeout, which helps delivering e.g. retransmitted
FINs, FINACKs and other messages.
Also support reopening a session in transitory timeout after seeing both
FINs by seeing both SYNs again. This helps quick connection
reestablishment if the peers want to.
Type: improvement
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Signed-off-by: Miklos Tirpak <miklos.tirpak@gmail.com>
Change-Id: Ibf521c79463472db97e593bfa02b32b4a06dfd2a
|
|
Change [1] put static mappings in flow hash. This change also broke
relationship between nat pool addresses and static mappings. Port and
address are no longer reserved in nat pool address records for a new
static mapping.
Because of this change both nat objects and their configuration can
function independently. This change also removed already broken logic of
having static-mapping-only configuration.
In this patch i have cleaned up and removed unnecessary logic for static
mapping configuration functions, address configuration functions,
interface configuraiton functions and all callback functions used for
resolving interface address bound records.
No more viable configuration option static-mapping-only is also removed
because there is no more option to run traffic through vpp for static
mappings without having flow hash table allocated. Instead user is now
able to create static mapping records without using nat pool addresses.
Fixed and improved management of required fib entries (ensuring VPP will
reply to ARP for all external addresses on outside interfaces) through
holding a refcount for their creation and removal.
[1] https://gerrit.fd.io/r/c/vpp/+/34077
Type: improvement
Change-Id: Ic16deefbede833d574c2a5972155c9afa5bc62ce
Signed-off-by: Filip Varga <fivarga@cisco.com>
|
|
This patch improves algorithm responsible for choosing nat pool address
during dynamic session creation.
Patch synchronizes nat pool address attributes with vpp interfaces doing
so gives nat option to determine correct nat pool address when creating
dynamic session.
Improvements:
* match dst address subnet and src fib with nat pool address
* for output-feature also fallback match of tx_sw_if_index with nat
pool address
Type: improvement
Change-Id: I594638bc76fc1153f582add376838b4b72ff573a
Signed-off-by: Filip Varga <fivarga@cisco.com>
|
|
Put static mappings in flow hash, drop existing hash tables used for
static mappings. Drop refcount variables and use hash table as a single
point of truth. Allow creating a static mapping conflicting with dynamic
mapping, which will take precedence after dynamic mapping is freed, so
that the existing flow can finish transferring data.
Type: fix
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: Idfde8efabc09971be38921d4b0ca5ccf4e9fe412
|
|
Fix coverity warning by initialising proto variable to a dummy value.
This value is never used because consuming function uses this
parameter value only if is_addr_only flag is not set and this flag is
always set if proto value is not provided by user.
Type: fix
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: I9b5e8c08346bea1e2b460bb09e962c4b8d3b6947
|
|
This reverts commit 69b7599e4b061a8996205f0304232ede84cb70d4.
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: If531b122ae5a9f91c2fe6eaa0da69922a91f16d3
|
|
Put static mappings in flow hash, drop existing hash tables used for
static mappings. Drop refcount variables and use hash table as a single
point of truth. Allow creating a static mapping conflicting with dynamic
mapping, which will take precedence after dynamic mapping is freed, so
that the existing flow can finish transferring data.
Type: fix
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: Ieeba691d83a83887d0a0baccd5f3832f66126096
|
|
Type: improvement
Change-Id: I9a4303030b9657c28bbd73168def72c7daa13483
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
Improving session filtering capabilities of
show nat44 sessions CLI command for EI and ED NAT
plugins. Adding filtering options: saddr, sport,
daddr, dport, proto for both i2o and o2i flows.
Type: improvement
Change-Id: I70bc94a2e922cddf9451eb7dcbf4a7be21ebf0df
Signed-off-by: Filip Varga <fivarga@cisco.com>
|
|
Fixed FIB entry per interface, pool and
static mapping registrations in NAT control plane.
Improved FIB configuration handling in NAT -
added functions to generalize handling of FIB & NAT,
cleaned up interface callback functions. Changed "is_"
macros to inline functions for easier debugging.
Type: improvement
Change-Id: I68a17761a975dd819139ae94e52a8a85d3f27ffc
Signed-off-by: Filip Varga <fivarga@cisco.com>
|
|
Refactoring and cleaning up address allocation functions &
ip table update callbacks.
Type: refactor
Change-Id: I9a11700a5f335b64d0d84e04d8e16d040624e01b
Signed-off-by: Filip Varga <fivarga@cisco.com>
|
|
Return unsupported error if user calls one
of the configuration functions that can
run only after nat44-ed plugin is
enabled via appropriate api/cli
call.
Type: fix
Change-Id: I0d4ab0684ba5ae23fc2ecc668554a34537c2904a
Signed-off-by: Filip Varga <fivarga@cisco.com>
|
|
Refactoring static mapping configuration
functions based on feature type.
Type: refactor
Signed-off-by: Filip Varga <fivarga@cisco.com>
Change-Id: I007d9b0e9717ced613fbcef2b11b6853f479be1e
|
|
Refactored & fixed NAT44ED configuration
functions used for handling interfaces and
nodes.
Type: refactor
Signed-off-by: Filip Varga <fivarga@cisco.com>
Change-Id: I6fbbb7f0fe35d572675997745d53290152987424
|
|
snat_set_frame_queue_nelts has been replaced with
nat44_ed_set_frame_queue_nelts.
Type: fix
Signed-off-by: Ruslan Babayev <ruslan@babayev.com>
Change-Id: I8d970be71376fdbb2bfd383d4d5824a8def93bb3
|
|
Newline get's ignored when parsing configuration file.
Type: fix
Signed-off-by: Filip Varga <fivarga@cisco.com>
Change-Id: Ib4f86177150dfe3bc085231a9268cf730490ea81
|
|
Removing obsolete optional parameters.
Type: fix
Change-Id: I135eb4767979ab81636da16e91752a2ad80e0a45
Signed-off-by: Filip Varga <fivarga@cisco.com>
|
|
Avoid crash if nat pool not allocated when issuing "show nat44 summary".
Type: fix
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: I55661cf699bab04f4673e9d471fe12486e972067
|
|
This patch achieves complete separation of
endpoint-dependent and endpoint-independent IPv4 NAT
features. Some common stuff is also moved to NAT
library.
Type: refactor
Change-Id: I52468b7e2b5ac28958a2baf8e2ea01787322e801
Signed-off-by: Filip Varga <fivarga@cisco.com>
|