Age | Commit message (Collapse) | Author | Files | Lines |
|
Change-Id: I088163f10ae5515d7a9115781cc13ef563fafed5
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
Change-Id: I484d79000c1bbd87ff83847cf567bf3414a719d3
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
Change-Id: Id25b447bddccb7b321123e4abc4134e7261a0807
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
Change-Id: Iba1cc1179ee80478e29888790a6476571d1904dc
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
When enabled then Twice-NAT is applied only when
source IP equals destination IP after DNAT
Change-Id: I58a9d1d222b2a10c83eafffb2107f32c1b4aa3a8
Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
|
|
Change-Id: I7e6b0e7e91cc032b1685f35de5d84363a85158a5
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
When NAT44 forwarding is disabled, if a DHCP server-to-
client packet arrives on an outside interface, it is
handled correctly by setting the next node to the next
feature on the ip4-unicast feature arc, where it can be
processed.
When NAT44 forwarding is enabled, if a DHCP server-to-
client packet arrives, it is not handled any differently
than other packets and ends up going to ip4-lookup
which results in the packet being dropped.
Move the check for DHCP server-to-client packets outside
of the block that is executed if forwarding is disabled so
DHCP replies will be processed in either case.
Change-Id: Ia795cce3fd459f3252c2c17d53bb88ceaeaafca4
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Change-Id: Ieeafb41d10959700bfd434cd455800af31944150
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
When a user session is allocated/reused, only increase
one of the session counters for that user if the counters
are below the per-user limit.
THis addresses a SEGV that arises after the following
sequence of events:
- an outside interface IP address is put in a pool
- a user exceeds the number of per-user translations by
an amount greater than the number of per-user translations
(nsessions + nstaticsessions > 100 + 100)
- the outside interface IP address is deleted and then added
again (observed when using DHCP client, likely happens if
address changed via CLI, API also)
- the user sends more packets that should be translated
When nsessions is > the per-user limit,
nat_session_alloc_or_recycle() reclaims the oldest existing
user session. When an outside address is deleted, the
corresponding user sessions are deleted. If the counters were
far above the per-user limit, the deletions wouldn't result
in the counters dropping back below the limit. So no session
could be reclaimed -> SEGV.
Change-Id: I940bafba0fd5385a563e2ce87534688eb9469f12
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Change-Id: I3e4bbfe205c86cb0839dd5c542f083dbe6bea881
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
Do not translate packet which go out via nat44-in2out-output and was tranlated
in nat44-out2in before. On way back forward packet to nat44-in2out node.
Change-Id: I934d69856f0178c86ff879bc691c9e074b8485c8
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
If forwarding is enabled, inbound packets on an outside
interface should not be dropped and instead pass on to
the FIB lookup. This works for TCP and UDP but not other
IP protocols. Enable it for unknown protocols.
Change-Id: I1da84b5633a36b3e5e64079754db2fcc50f29819
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
forwarding mode:
session initiaded from service host - translate
session initiaded from remote host - do not translate
Change-Id: I48170ee8e4ad14d3d3083ee31a40ef8d10d6ff32
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
Call vnet_feature_next() for DHCP replies instead of using
default ip4-lookup. This allows DHCP replies to reach an
outside interface if it's configured as a DHCP client.
Change-Id: Icce1cd68b21256fcd6b1fad6792c06578b0e4e36
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Change-Id: I85c799f28c4246884107e569a36482af10d9be9d
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
Add API function which enables forwarding of packets not matching
existing translation or static mapping instead of dropping them.
When forwarding is enabled matching packets will be translated
while non-matching packets will be forwarded without translation.
Change-Id: Ic13040cbad16d3a1ecdc3e02a497171bef6aa413
Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
|
|
Translation of both source and destination addresses and ports for 1:1 NAT
session initiated from outside network (ExternalIP K8 use case).
Change-Id: Ic0000497cf71619aac996d6d580844f0ea0edc14
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
Change-Id: Iebf859b6d86482e4465423bad598eecf87e53ec4
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
Translation of fragmented packets.
Change-Id: I9b1f2e9433ce273638080f32c2d3bff39c49899d
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
Change-Id: Ie3245b96c511cc30915e70e8c881f445291a38c2
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
Change-Id: I3873d3e411bf93cac82e73a0b8e3b22563aaf217
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
Change-Id: I7f18f8c4ba609d96950dc1f833feb967d4a099b7
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
Change-Id: I41a51bb36e31e05c76fef0b34fe006afbee27729
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
in order to trace session_index
Change-Id: I4433155fbe21635f8a997523e2c7900c6a7569af
Signed-off-by: dongjuan <dong.juan1@zte.com.cn>
|
|
added load-balancing static mappings with unequal load support
Change-Id: Ie505e41f24d46f812b94dd28bdafe3dc170a6060
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
Change-Id: I30a7e3da7a4efc6038a91e27b48045d4b07e2764
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|