Age | Commit message (Collapse) | Author | Files | Lines |
|
Re-enable the test for 2-worker config test
Change-Id: Ie108c5d244c6704ffa152177ca77f6b6055fe38e
Type: test
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
Don't expect save_rewrite_length to be set correctly on RX path.
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: Ieee40d119213f617c3d836181e5879f084b74548
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
If the multi-worker default VPP configuration is triggered by
setting VPP_WORKER_CONFIG="workers 2", some of the tests fail
for various reasons.
It's a substantial number, so this change marks all of the
testsets that have this issue, such that they can be addressed
later independently.
Type: test
Change-Id: I4f77196499edef3300afe7eabef9cbff91f794d3
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
Avoid doing inter-thread reads without locks by doing a handoff before
destination address rewrite. Destination address is read from a session
which is possibly owned by a different thread. By splitting the work in
two parts with a handoff in the middle, we can do both in a thread safe
way.
Type: improvement
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: I1c50d188393a610f5564fa230c75771a8065f273
|
|
Type: improvement
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: Ibea7ec844d1d910e8a3235e11154b1ecea8302ac
|
|
If static-mapping-only is enabled, NAT pool cannot be configured, only
static mappings. There're two ways to add addresses to the NAT pool:
by address range, or by first found address from an interface.
NAT44_ADD_DEL_ADDRESS_RANGE already tests if dynamic mappings are
available but NAT44_ADD_DEL_INTERFACE_ADDR doesn't. If
static-mapping-only is enabled, adding addresses by range is rejected
but by interface not.
With this change, if static-mapping-only is enabled, do not allow to
add addresses to the NAT pool both ways.
Type: fix
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
Change-Id: Ifc055ea9a71a5e579388833a2990aef21bf7ed29
|
|
Including a general missing free in fromjson autogenerated code.
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: I9ab2b0193135e2fb3d62d51b3c114df56969e341
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Type: improvement
Change-Id: I456f9b14e6a4eb46c9c49f6e09acccae530e4ebc
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Fix dependency issues where multi-arch file is using API generated file.
Type: improvement
Change-Id: I5d4af7a630529bc138c35841723e38938f36d963
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
A NAT sub-plugin doing statically configured match/rewrite on IP4 input or output.
It's stateless (no connection tracking).
Currently it supports rewriting of SA, DA and TCP/UDP ports.
It should be simple to add new rewrites if required.
API:
pnat_binding_add, pnat_binding_del, pnat_bindings_get, pnat_interfaces_get
CLI:
set pnat translation interface <name> match <5-tuple> rewrite <5-tuple> {in|out} [del]
show pnat translations
show pnat interfaces
Trying a new C based unit testing scheme. Where the graph node is tested
in isolation. See pnat/pnat_test.c.
Also added new cmake targets to generate coverage directly.
E.g.:
make test_pnat-ccov-report
File '/vpp/sdnat/src/plugins/nat/pnat/pnat.c':
Name Regions Miss Cover Lines Miss Cover
------------------------------------------------------------------------------------
pnat_interface_by_sw_if_index 39 8 79.49% 13 0 100.00%
pnat_instructions_from_mask 9 0 100.00% 13 0 100.00%
pnat_binding_add 64 8 87.50% 31 2 93.55%
pnat_flow_lookup 4 4 0.00% 10 10 0.00%
pnat_binding_attach 104 75 27.88% 33 6 81.82%
pnat_binding_detach 30 5 83.33% 23 2 91.30%
pnat_binding_del 97 33 65.98% 17 3 82.35%
pnat.c:pnat_calc_key_from_5tuple 9 1 88.89% 14 1 92.86%
pnat.c:pnat_interface_check_mask 10 2 80.00% 11 2 81.82%
pnat.c:pnat_enable 5 0 100.00% 11 0 100.00%
pnat.c:pnat_enable_interface 107 26 75.70% 60 15 75.00%
pnat.c:pnat_disable_interface 91 30 67.03% 32 7 78.12%
pnat.c:pnat_disable 7 2 71.43% 13 7 46.15%
------------------------------------------------------------------------------------
TOTAL 576 194 66.32% 281 55 80.43%
File '/vpp/sdnat/src/plugins/nat/pnat/pnat_node.h':
Name Regions Miss Cover Lines Miss Cover
------------------------------------------------------------------------------------
pnat_test.c:pnat_node_inline 67 11 83.58% 115 1 99.13%
pnat_test.c:pnat_calc_key 9 2 77.78% 14 2 85.71%
pnat_test.c:pnat_rewrite_ip4 55 11 80.00% 60 12 80.00%
pnat_test.c:format_pnat_trace 1 1 0.00% 12 12 0.00%
pnat_node.c:pnat_node_inline 63 63 0.00% 115 115 0.00%
pnat_node.c:pnat_calc_key 9 9 0.00% 14 14 0.00%
pnat_node.c:pnat_rewrite_ip4 55 55 0.00% 60 60 0.00%
pnat_node.c:format_pnat_trace 5 5 0.00% 12 12 0.00%
------------------------------------------------------------------------------------
TOTAL 264 157 40.53% 402 228 43.28%
Type: feature
Change-Id: I9c897f833603054a8303e7369ebff6512517c9e0
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Make number of worker handoff frame queue elements configurable as
a set nat frame-queue-nelts command. The default value is 64 which
is the same value that was previously hard-coded. The idea is that
allowing larger values can be useful in some cases, to avoid
congestion drops. Also add nat_set_fq_options API support and a
corresponding test case.
Type: improvement
Change-Id: I5c321eb2d7997f76fac2703d9c4a5b2516375db3
Signed-off-by: Elias Rudberg <elias.rudberg@bahnhof.net>
|
|
Making code more simple and storing thread index along with session
index as a preparation step for fixing thread safety patches.
Type: improvement
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: Ib0c531e9f1f64b1f1ee912d4a83279200638e931
|
|
This change introduces flow concept to endpoint-dependent NAT. Instead
of having a session and a plethora of special cases in code for e.g.
hairpinning, twice-nat and others, figure all this out and store it in
flow logic. Every flow has a match and a rewrite part. This unifies all
the NAT packet processing cases into one - match a flow and rewrite the
packet based on that flow. It also provides a cure for hairpinning
dilemma where one part of the flow is on one worker and another on
a different one. These cases are also sped up by not requiring
destination adress lookup every single time to be able to rewrite source
nat as this is now part of flow rewrite logic.
Type: improvement
Change-Id: Ib60c992e16792ea4d4129bc10202ebb99a73b5be
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Patch n. 2 aimed at moving EI features out of
NAT44 plugin & split of EI/ED functions.
Type: refactor
Change-Id: Ida20c1c084449b146344b6c3d8442f49efb6f3fa
Signed-off-by: Filip Varga <fivarga@cisco.com>
|
|
This patch is aimed at moving EI features out of NAT44
plugin & split of EI/ED functions.
Type: refactor
Change-Id: I63cf70a264ed2512708fe92665d64f04690783d0
Signed-off-by: Filip Varga <fivarga@cisco.com>
|
|
Split ED and EI nat44 test cases. Added multi worker
support for ED test cases.
Type: refactor
Change-Id: Ibcc2f62b94cacff69ed35c5d914b55f9fdbcf882
Signed-off-by: Filip Varga <fivarga@cisco.com>
|
|
Type: fix
Change-Id: Ie41e2fb9393bf63099519150bb158b830d2c0d87
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
|
|
Type: refactor
Change-Id: I077110e1a422722e20aa546a6f3224c06ab0cde5
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: refactor
Change-Id: Ie67dc579e88132ddb1ee4a34cb69f96920101772
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
- reduces number of instructions generated 4 times compared to old code
- adds pool_foreach2 which is more friendly to clang-format
Type: improvement
Change-Id: I51e9c7fb09655c60d883987dadf5b2666c12b3f7
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
This reverts commit bfba2d555331ce67f707e608877e96dbd2aacd80.
Reason for revert: breaks test test_nat44.TestNAT44.test_ipfix_max_sessions
Change-Id: I6eed4d02835ab792e7e3491fc14240cc88a86710
Type: fix
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: fix
The code for quota exceeded events is a u32 and was being copied
into ipfix packets in host byte order. Same for the limit field.
Swap the order before copying into packet buffer.
Change-Id: I881766e1c52acc9bebde38d85228fa492214ee21
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Fix in nat44 hairpinning code to check if anything was actually
changed in the snat_hairpinning() routine, and return 0 if nothing
changed. This helps avoid an infinite loop repeating the three
nodes nat44-hairpinning-->ip4-lookup-->ip4-local in case there
was no change. Also add a corresponding test case.
Type: fix
Signed-off-by: Elias Rudberg <elias.rudberg@bahnhof.net>
Change-Id: I95f48476bd002ac4c6789afe504681f1963e5d38
Signed-off-by: Elias Rudberg <elias.rudberg@bahnhof.net>
|
|
Type: refactor
Change-Id: I9096e3b473110350e1e8e5936e3c4c164f8969a7
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
A special case when out2in packet needs to
be handoffed to other worker thread. We are
not able to determine which thread they belong
to in the first processing of nat handoff node.
These packets needs to go through out2in slowpath
before we are able to tell where to handoff them.
Type: fix
Ticket: VPP-1941
Change-Id: I7173bda970ce6a91d81f48fc72aa2457586a076f
Signed-off-by: Filip Varga <fivarga@cisco.com>
|
|
Add a condition where a TCP session in transitory timeout is kept
instead of being erroneously deleted.
Type: fix
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: Ic625c8c88cc8864293ebd57b0321505652af9380
|
|
Using vlib_main of another thread is prohibited.
Type: fix
Change-Id: I9a85a5fee5c6665d423b4306faf3b3f2c5e22f99
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Fixed nat_ha and ipfix tests. Removed obsolete tests
and moved extended tests to standard tests.
Type: fix
Change-Id: I2d7f4c4fa4c52a4aa10d70c956e085a0fe00b911
Signed-off-by: Filip Varga <fivarga@cisco.com>
|
|
VAT2: A completely auto-generated replacement of VAT.
Reads input message in JSON from stdin and outputs received messages in JSON.
A VAT2 plugin is automatically built for a .api file.
There no longer a need for a separate _test.c.
Example:
vat2 show_version {}
{
"_msgname": "show_version_reply",
"retval": 0,
"program": "vpe",
"version": "21.01-rc0~411-gf6eb348a6",
"build_date": "2020-11-19T09:49:25",
"build_directory": "/vpp/autogen3"
}
vat2 sw_interface_dump '{"sw_if_index": -1,
"name_filter_valid": 0,
"name_filter": ""}'
[{
"_msgname": "sw_interface_details",
"sw_if_index": 0,
"sup_sw_if_index": 0,
"l2_address": "00:00:00:00:00:00",
"flags": "Invalid ENUM",
"type": "IF_API_TYPE_HARDWARE",
"link_duplex": "LINK_DUPLEX_API_UNKNOWN",
"link_speed": 0,
"link_mtu": 0,
"mtu": [0, 0, 0, 0],
"sub_id": 0,
"sub_number_of_tags": 0,
"sub_outer_vlan_id": 0,
"sub_inner_vlan_id": 0,
"sub_if_flags": "Invalid ENUM",
"vtr_op": 0,
"vtr_push_dot1q": 0,
"vtr_tag1": 0,
"vtr_tag2": 0,
"outer_tag": 0,
"b_dmac": "00:00:00:00:00:00",
"b_smac": "00:00:00:00:00:00",
"b_vlanid": 0,
"i_sid": 0,
"interface_name": "local0",
"interface_dev_type": "local",
"tag": ""
}]
This is the first phase and vat2 is not integrated in packaging yet.
Type: feature
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: Ib45ddeafb180ea7da8c5dc274a9274d7a4edc876
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Fixed compatibility issue between
nat ei and nat ed modes. Moved nat
syslogging to nat librarry. Deprecating
apis that will be integrated in upcoming
candidate configuration patch.
Type: refactor
Change-Id: I334b1b05b81b74667c5c76a05f768442e0dcf7e8
Signed-off-by: Filip Varga <fivarga@cisco.com>
|
|
Cleanup of print functions in api file,
splitting functionality of cleanup callbacks for ED
and EI NAT. Updating and fixing API & CLI calls.
Type: refactor
Change-Id: I7a9dc4c8b1d2ca29db4754be7dfa4f698942127a
Signed-off-by: Filip Varga <fivarga@cisco.com>
|
|
Type: fix
IPfix messages about NAT44 session create/delete were being populated
with the FIB table index instead of the table ID. The table ID is the
correct identifier to report externally (NAT64 IPfix messages for BIB
and session create/delete use table ID, as does NAT syslogging). Convert
the table index to an ID before adding it to the IPfix NAT44 session
create/delete message data.
Change-Id: I0166384752b17ff3a8c55aa19fa2af7a8140791e
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Type: fix
Fixes: 17a8ab6857f023bc1436d84808acc58dd614203e
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: I597d08d1d2457116e6856fa40cd65987e13a28d4
|
|
Type: improvement
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: I478f5dcbf7595c62611d25a40aa356d8ce09d216
|
|
Type: fix
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
Change-Id: I9930a2a90caa78e848fe657ab2da863467be41ea
|
|
Type: improvement
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: Ibbdfb0a2d1ff64044a0f6b2443b526bd1cf12f93
|
|
Calculate bihash buckets as n_elts / 2.5 rounded to closest pow2
per Damjan's recommendation. Remove memory configuration parameters
because bihash init ignores them anyway as it resides in main heap now.
Type: improvement
Change-Id: I189f463f3c4640106cce4f12d3c5a62969276a82
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
- we should not copy and iterate over the pool underlying vector, as
slots can be freed (ie in the freelist).
- delete interface instead of adding them again
- fix the log message
Type: fix
Change-Id: If0a7a2f475b4f40793eb29ea80a9d29fe5d1bcb9
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: refactor
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
Change-Id: Id1801519638a9b97175847d7ed58824fb83433d6
|
|
Type: fix
Change-Id: I4aa0dac544582703316cbcfabe67bcb7dc24d4f7
Signed-off-by: Filip Varga <fivarga@cisco.com>
|
|
This patch changes initialization and configuration of NAT
plugin. Instead of allocating data structures at vpp plugin
initialization phase allocation and configuration happens
after calling enable API or CLI call. This reduces base VPP
memory footprint and also enables dynamic reconfiguration
of the NAT plugin.
Type: improvement
Change-Id: I42c069ee19a0311d043ac1f3f230d87bc8d2680f
Signed-off-by: Filip Varga <fivarga@cisco.com>
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Id13f33843b230a1d169560742c4f7b2dc17d8718
|
|
Type: fix
Signed-off-by: Dengfeng Liu <liudf0716@gmail.com>
Change-Id: I3e7ee771d0cf5b7b1b9fbbc833776d523dfa9f09
|
|
After get_icmp_o2i_ed_key() bihash key may include
IP protocol and addresses from inner ICMP packet.
It is OK for session lookup, but we should not create
a session on ICMP error message receiving.
Type: fix
Signed-off-by: Vladimir Isaev <visaev@netgate.com>
Change-Id: Ic93272ebe90d2288a975265439f9e079eb28936a
|
|
Bihash key already contains rx_fib_index for lookup
but fib value for session itself is set to 0.
In the result bihash is allocated with key with fib index
set, but free function is looking for key with fib index set
to zero. It leads to use-after-free because session itself is
removed from pool but bihash is not because of key mismatch.
Type: fix
Signed-off-by: Vladimir Isaev <visaev@netgate.com>
Change-Id: I8ac5a41b0a5a32b1baab9e9d757141d5b24b7798
|
|
Type: refactor
Change-Id: I8785e4987e4f60361072440d0c3c6954c9c12394
Signed-off-by: Filip Varga <fivarga@cisco.com>
|
|
Type: improvement
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: I330822c5d675cdfa57ab75ceb0223f11e0ebb7d2
|
|
Type: style
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I26a19e42076e031ec5399d5ca05cb49fd6fbe1cd
|
|
Type: refactor
Change-Id: I3b9e17164647d2019b1f40cffeed63393345219e
Signed-off-by: Filip Varga <fivarga@cisco.com>
|
|
Type: refactor
Change-Id: I3c5ca31de8046b82fb3d3f364ba88370fe51ef02
Signed-off-by: Filip Varga <fivarga@cisco.com>
|