summaryrefslogtreecommitdiffstats
path: root/src/plugins/nat
AgeCommit message (Collapse)AuthorFilesLines
2020-03-27acl: API cleanupJakub Grajciar1-51/+14
Use consistent API types. Type: fix Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com> Change-Id: I09fa6c1b6917936351bd376b56c414ce24488095 Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
2020-03-26acl: revert acl: api cleanupOle Trøan1-14/+51
This reverts commit aad1ee149403994194cf37cef4530b042ba7df3a. Reason for revert: Verify failure. Doesn't build. Type: fix Change-Id: I91b1b26ac43edde4853e4561a0083d0b3a06efee Signed-off-by: Ole Troan <ot@cisco.com>
2020-03-26acl: API cleanupJakub Grajciar1-51/+14
Use consistent API types. Type: fix Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com> Change-Id: If90d753f129312400c4c3669bb86289d0c3e0d99 Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
2020-03-26nat: transitory timeout for TCP CLOSED stateKlement Sekera9-118/+329
Wait transitory timeout seconds before moving internal state of TCP session to CLOSED state per RFC 7857. This patch implements this functionality for endpoint-dependent NAT. Type: improvement Signed-off-by: Klement Sekera <ksekera@cisco.com> Change-Id: I4491d831cd9edf63fae520a516cdbe590bac85db
2020-03-25nat: fix error countersKlement Sekera4-1/+21
Type: fix Change-Id: I021b1427362f4bdba1c0ebc9863c9143dd6b3cb7 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2020-03-15nat: test cleanupKlement Sekera1-291/+261
Type: improvement Signed-off-by: Klement Sekera <ksekera@cisco.com> Change-Id: I5ec761bfcdc13a8238b83ff46c2f1c53ec0e79d8
2020-03-13nat: in2out/out2in handoff node index bugfixElias Rudberg1-2/+2
This fixes a bug in the initialization of handoff_out2in_index and handoff_in2out_index where the node index for out2in was set to the in2out node, and vice versa. Type: fix Signed-off-by: Elias Rudberg <elias.rudberg@bahnhof.net> Change-Id: I983ddd3b3cec06f4cb3fb95b2a9cda4ab6d1270f
2020-03-13nat: timed out session scavenging upgradeFilip Varga11-293/+615
Patch changes the behavior of session scavenging and fixes multiple nat issues. Allows proper session clearing and removes issue with lingering sessions in session db. Patch also updates and fixes CLI/API calls for better readability of session state metrics. Fixes security issue that would allow attacker to reuse timed out session in both directions (in2out/out2in). Type: improvement Signed-off-by: Filip Varga <fivarga@cisco.com> Change-Id: I78897585a2a57291fad5db6d457941aa0a0457bd
2020-03-11nat: dslite plugin separationFilip Varga15-84/+213
Type: refactor Signed-off-by: Filip Varga <fivarga@cisco.com> Change-Id: I81546423200cc7f8a06b527dac8ead191a9e0519
2020-02-20nat: user deletion function & extra metricsFilip Varga4-0/+272
Type: improvement Signed-off-by: Filip Varga <fivarga@cisco.com> Change-Id: Ia5dbfe864c18e953ff49147a9a4684d2ca14b96e
2020-02-20nat: avoid running pointless session cleanupsKlement Sekera3-11/+33
Save the next session timeout when sweeping sessions for cleanup so that we can avoid unnecessary runs of the sweeping algorithm. Type: fix Change-Id: I736d00f2dfe242af10f963fbe34b11128f8b0613 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2020-02-20nat: nat44 split slow and fast pathFilip Varga2-1080/+339
Type: improvement Change-Id: I07c7e1c154583906ac9af958f22ed9a1be382f4a Signed-off-by: Filip Varga <fivarga@cisco.com>
2020-02-07nat: api & cli command for forcing session cleanupFilip Varga4-0/+98
Ticket: VPP-1836 Type: feature Signed-off-by: Filip Varga <fivarga@cisco.com> Change-Id: I8f7fc011bac435445a8916a4948d130ca9162f67
2020-02-05nat: move dslite to separate sub-pluginOle Troan19-763/+775
Type: refactor Change-Id: If3d9f16f3a06c10b354f1eef674e8db5f3c44de7 Signed-off-by: Ole Troan <ot@cisco.com>
2020-02-04nat: pool allocation function fixFilip Varga1-1/+1
Type: fix Change-Id: I75b20db66fb58e1724a212253c51315836079f4b Signed-off-by: Filip Varga <fivarga@cisco.com>
2020-01-27docs nat: fix nat-ha ascii artPaul Vinciguerra1-0/+2
See: https://docs.fd.io/vpp/19.08/nat_ha_doc.html Type: docs Change-Id: I43ecf1dfb6976ebafee04d820f0e1b07393a0b93 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2020-01-24nat: in2out-output nodes work with acl reflectMatthew Smith2-2/+107
Type: feature The current feature ordering of NAT44 nodes with respect to the ACL plugin's IPv4 input/output features is: ip4-output: acl-plugin-out-ip4-fa runs before any NAT44 nodes ip4-unicast: acl-plugin-in-ip4-fa runs before any NAT44 nodes ACL rules with action permit+reflect can keep track of outbound flows and allow the replies inbound without an explicit inbound rule. If ACL permit+reflect rules are configured on an interface that also has NAT44 configured with output-feature/postrouting translation of outbound packets, the ACL rules cannot allow inbound packets. The ACL state that was stored on the outbound flow contains the IP addresses of the original packet, prior to translation. The inbound packets are being evaluated by the ACL node using the translated addresses. The order of processing inbound needs to be the opposite of what it was outbound for this to work. Change the NAT44 features on ip4-output so that they run before outbound ACL nodes. This matches the existing behavior of the NAT44 nodes which rewrite source addresses as an input feature instead of an output feature. This was only done for endpoint dependent mode because the regular endpoint independent in2out-output node currently selects an explicit next node rather than using the next node on the feature arc. Unit test added to configure both NAT and an ACL and ensure that out2in packets matching an in2out flow are permitted by the ACL and translated by NAT. Change-Id: Ibd679c28b64c3fc3cc8c0606ea93123e384e839f Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2020-01-21nat: fix dhcp client on outside interface with output featureAlexander Chernavin2-18/+18
There was an attempt to fix this problem in the commit: d3b8c861a44e70c197ab721fa3ce7f38bbeab7fd But checking the LOCALLY_ORIGINATED flag didn't work because this flag gets reset before it can reach the NAT nodes. With this commit, replace the check for the LOCALLY_ORIGINATED flag with a check to see if the packet is a DHCP broadcast. Type: fix Change-Id: I069c08a785b5988b10192f528e4f9c4c7cc2f8a3 Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
2020-01-21nat: removed obsolete fragmentation codeFilip Varga1-84/+16
Type: fix Ticket: VPP-1817 Signed-off-by: Filip Varga <fivarga@cisco.com> Change-Id: Id4d694ce636b0a213e65ce27c32a8150df9af0f8
2020-01-17nat: refactor of port/address allocation functionsFilip Varga8-15/+429
Change-Id: Ie2a3c0f44322dd8415603b7ce51bb72d72769c95 Ticket: VPP-1815 Type: refactor Signed-off-by: Filip Varga <fivarga@cisco.com>
2020-01-10docs: Edit FEATURE.yaml files so they can be publishedJohn DeNisco1-4/+4
Type: docs Signed-off-by: John DeNisco <jdenisco@cisco.com> Change-Id: I7280e5c5ad10a66c0787a5282291a2ef000bff5f
2020-01-03nat: use SVRKlement Sekera28-5253/+1424
Remove NAT's implementation of shallow virtual reassembly with corresponding CLIs, APIs & tests. Replace with standalone shallow virtual reassembly provided by ipX-sv-reass* nodes. Type: refactor Change-Id: I7e6c7487a5a500d591f6871474a359e0993e59b6 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2020-01-03nat: add feature.yamlOle Troan1-0/+27
And add support for multiple maintainers in JSON schema. Type: docs Change-Id: Ice430927ceecf53526a3fdf46c075a95206bf0ac Signed-off-by: Ole Troan <ot@cisco.com>
2019-12-17ip: Protocol Independent IP NeighborsNeale Ranns1-2/+2
Type: feature - ip-neighbour: generic neighbour handling; APIs, DBs, event handling, aging - arp: ARP protocol implementation - ip6-nd; IPv6 neighbor discovery implementation; separate ND, MLD, RA - ip6-link; manage link-local addresses - l2-arp-term; events separated from IP neighbours, since they are not the same. vnet retains just enough education to perform ND/ARP packet construction. arp and ip6-nd to be moved to plugins soon. Change-Id: I88dedd0006b299344f4c7024a0aa5baa6b9a8bbe Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-12-12nat: session cleanup fixFilip Varga8-79/+266
Ticket: VPP-1795 Type: fix Change-Id: Ib3b5742119d7013c293a11eb3dd1aadf46b422dd Signed-off-by: Filip Varga <fivarga@cisco.com>
2019-12-10api: multiple connections per processDave Barach1-1/+1
Type: feature Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: I2272521d6e69edcd385ef684af6dd4eea5eaa953
2019-12-04fib: Decouple source from priority and behaviourNeale Ranns6-35/+46
Type: feature the fib_source_t enum alone no longer defines the priority and behaviour, instead each source must be allocated these attributes. This allows the creation of other sources by the plugins (and soon over the API). Signed-off-by: Neale Ranns <nranns@cisco.com> Change-Id: I890ee820fbc16079ee417ea1fbc163192806e853
2019-11-27nat: fix dhcp client on outside interface with output featureAlexander Chernavin2-0/+86
When a DHCP client is configured on a NAT outside interface with output feature enabled, DHCP packets will reach the NAT in2out-output node and will be dropped with "out of ports" reason. With this commit, allow locally originated DHCP packets to be sent from a NAT outside interface with output feature enabled. Type: fix Change-Id: I47d76b22587f2bf0c7b0b9dfda41c89f8f61d0b4 Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
2019-11-26fib: Table ReplaceNeale Ranns1-13/+16
Type: feature from the API doc, a table replace is: " The use-case is that, for some unspecified reason, the control plane has a very different set of entries it wants in the table than VPP currently has. The CP would thus like to 'replace' VPP's current table only by specifying what the new set of entries shall be, i.e. it is not going to delete anything that already eixts. the CP delcartes the start of this procedure with this begin_replace API Call, and when it has populated all the entries it wants, it calls the below end_replace API. From this point on it is of coursce free to add and delete entries as usual. The underlying mechanism by which VPP implements this replace is purposefully left unspecified. " In the FIB, the algorithm is implemented using mark and sweep. Algorithm goes: 1) replace_begin: this marks all the entries in that table as 'stale' 2) download all the entries that should be in this table - this clears the stale flag on those entries 3) signal the table converged: ip_table_replace_end - this removes all entries that are still stale this procedure can be used when an agent first connects to VPP, as an alternative to dump and diff state reconciliation. Change-Id: I168edec10cf7670866076b129ebfe6149ea8222e Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-11-19nat: respect arc features (multi worker)Filip Varga7-419/+887
Type: fix Ticket: VPP-1747 Change-Id: If282aae3e584d7017c200f897b99c8a37eb1b2e5 Signed-off-by: Filip Varga <fivarga@cisco.com>
2019-11-15tests: Remove the unrequired VPP IP address/prefix class wrappersNeale Ranns1-13/+7
Type: refactor Change-Id: I204f3f8eebc5f5d5a377e91262f91c615fd00168 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-11-06build: add yaml file linting to make checkstylePaul Vinciguerra1-7/+6
Type: feature fts and trex rely on yaml config files. Verify that they are valid, so comitters can catch errors early. Change-Id: Ide0bb276659119c59bdbbc8b8155e37562a648b8 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-11-05misc: Fix python scripts shebang lineRenato Botelho do Couto3-3/+3
Type: fix Since CentOS 8, RPM build script doesn't accept '#!/usr/bin/env python' as a valid shebang line. It requires scripts to explicitly chose between python2 or python3. Change all to use python3 as suggested by Paul Vinciguerra. Depends-On: https://gerrit.fd.io/r/23170 Signed-off-by: Renato Botelho do Couto <renato@netgate.com> Change-Id: Ie72af9f60fd0609e07f05b70f8d96e738b2754d1
2019-11-05nat: NAT udp counter & unit test fixesFilip Varga5-20/+20
Ticket: VPP-1798 Type: fix Change-Id: I42f02d5824575720e95b9fc99cfa864252221a82 Signed-off-by: Filip Varga <fivarga@cisco.com>
2019-11-05nat: respect udp checksumFilip Varga6-170/+428
Type: fix Change-Id: I732be02d2e2b854eb589c3fa10f980ef2dbe8dfc Signed-off-by: Filip Varga <fivarga@cisco.com>
2019-11-04nat: revert respect udp checksumOle Troan6-428/+166
This reverts commit 0d75f783644a24b219ed79d9f9c17387783f67ca. Type: fix Signed-off-by: Ole Troan <ot@cisco.com> Change-Id: Iaf33301201897e6646eba2b4157e2a45f5fd30f2
2019-11-04nat: revert fix dual-loop tcp checksum botchOle Troan1-17/+9
This reverts commit 9654a37fac7fe2b425576eb0237b8d24ae44e1b1. Type: fix Signed-off-by: Ole Troan <ot@cisco.com> Change-Id: I93ed5a48303421de43f5494c11db2be9a3c8ce57
2019-11-04nat: fix dual-loop tcp checksum botchDave Barach1-9/+17
Type: fix Fixes: 22921 Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: I4fecce96d027c0ee1797d9d84cfab94b1ecdc02b
2019-10-28nat: respect udp checksumFilip Varga6-166/+428
Type: fix Change-Id: I73895fa0101bd50483160c8dc6faac2c67513077 Signed-off-by: Filip Varga <fivarga@cisco.com>
2019-10-22ip: ipfix-export API updateJakub Grajciar1-80/+76
Use consistent API types. Type: fix Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com> Change-Id: I5b03e5de111c3a3b8da4e9f02cba0aa99e3ee9f3
2019-10-17nat: tests support python3Ole Troan1-10/+9
Type: fix Signed-off-by: Ole Troan <ot@cisco.com> Change-Id: Ie15ea8f01846f87cb65e90e8762dc941441fc176
2019-10-04nat: fix use-after-freeBenoît Ganne1-4/+6
Type: fix Change-Id: Iac91c086c4e975f0bada058f40b7b7d4475377f8 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2019-09-23nat: fix update of outside fibs (output-feature)Dmitry Vakhrushev3-4/+198
NAT hasn't worked when NAT interfaces wasn't in default VRF (fib_index = 0). This issue has been occurred with interfaces with output-feature in endpoint-dependent mode. Update VAT commands: - update nat44_add_del_address_range - add nat44_interface_add_del_output_feature Ticket: VPP-1732 Type: fix Change-Id: Iddea15dde4b948f159a0056d48c55bd917037fd1 Signed-off-by: Dmitry Vakhrushev <dmitry@netgate.com>
2019-09-16api: autogenerate api trace print/endianOle Troan1-0/+5
In addition to the external vppapitrace tool, VPP itself supports dumping of API trace files. In two formats, "custom-dump" and "dump". "dump" gives a human friendly list, and "custom-dump" is meant to give a list of commands that can be fed to VAT. This patch only deals with "dump". Prior to this fix, auto-generation was only done for the basic types. This fix adds support for any type, including lists, and supports pretty-printing of enums, strings, IP addresses, MAC addresses and so on. Usage: api trace dump <api-trace-file> For example Change-Id: I4e485680e6dcfce7489299ae6cf31d835071ac40 ---------- trace 48 ----------- vl_api_sw_interface_set_flags_t: _vl_msg_id: 75 client_index: 0 context: 10 sw_if_index: 1 flags: IF_STATUS_API_FLAG_ADMIN_UP ---------- trace 49 ----------- vl_api_sw_interface_add_del_address_t: _vl_msg_id: 88 client_index: 0 context: 11 sw_if_index: 1 is_add: 1 del_all: 0 prefix: 172.16.1.1/24 ---------- trace 51 ----------- vl_api_cli_inband_t: _vl_msg_id: 819 client_index: 0 context: 13 cmd: packet-generator capture pg0 pcap /tmp/vpp-unittest-TestMAP-YhcmDX/pg0_out.pcap disable ---------- trace 58 ----------- vl_api_ip_neighbor_add_del_t: _vl_msg_id: 199 client_index: 0 context: 20 is_add: 1 neighbor: sw_if_index: 2 flags: IP_API_NEIGHBOR_FLAG_NONE mac_address: 0202.0000.ff02 ip_address: fd01:2::2 Signed-off-by: Ole Troan <ot@cisco.com> Change-Id: I5556d06008de2762e7c2d35a8b0963ae670b3db1 Type: fix Signed-off-by: Ole Troan <ot@cisco.com> Signed-off-by: Ole Troan <ot@cisco.com> Signed-off-by: Ole Troan <ot@cisco.com> Signed-off-by: Ole Troan <ot@cisco.com> Signed-off-by: Ole Troan <ot@cisco.com> Signed-off-by: Ole Troan <ot@cisco.com> Signed-off-by: Ole Troan <ot@cisco.com> Signed-off-by: Ole Troan <ot@cisco.com>
2019-09-10misc: fix shebang with missing envNathan Skrzypczak1-1/+1
This is needed for macos where /usr/bin/python[23] does not exist and /usr/bin is write protected Type: fix Change-Id: Ia1b3c732248c78482993de532fa2ea96e376d90a Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
2019-09-03api: enforce vla is last and fixed string typeOle Troan3-123/+42
Enforce that variable length fields are the last element of API messages. Add a 'fixed' version of string type, since dealing with multiple variable length strings turned out too painful for the C language bindings. The string type is now: { string name[64]; // NUL terminated C-string. Essentially decays to u8 name[64] string name[]; // Variable length string with embedded len field (vl_api_string_t) }; The latter notation could be made available to other types as well. e.g. { vl_api_address_t addresses[]; } instead of { u32 n_addr; vl_api_address_t addresses[n_addr]; }; Type: fix Change-Id: I18fa17ef47227633752ab50453e8d20a652a9f9b Signed-off-by: Ole Troan <ot@cisco.com>
2019-08-22tests: move plugin tests to src/plugins/*/testDave Wallace2-0/+9846
- Relocate plugin tests for 'make test' into src/plugins/*/test so that plugin test cases are co-located with the plugin source code. Type: refactor Signed-off-by: Dave Wallace <dwallacelf@gmail.com> Change-Id: I503e6a43528e14981799b735fa65674155713f67 Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2019-08-22nat: handoff traffic matching for dynamic NATFilip Varga9-222/+493
Type: feature Change-Id: I5c5af6f9acb340cc674323305104b8ce23e6d21d Signed-off-by: Filip Varga <fivarga@cisco.com>
2019-08-20vppapigen: remove support for legacy typedefsPaul Vinciguerra2-2/+1
vppapigen has remapped legacy to typedefs behind the scenes for some time now. - update .api files to use new style typedefs. - issue error on 'typeonly define' in .api files - remove unneeded macros redefining vl_noop_handler Type: refactor Change-Id: I7a8c4a6dafacee6a131f95cd0e9b03a8c60dea8b Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-08-01nat: handoff rewrite & fixes for multi-workerFilip Varga2-60/+163
Type: fix Change-Id: Ib9164d8f6c681e8900e645306f3a2dc0ac0e40a8 Signed-off-by: Filip Varga <filipvarga89@gmail.com>