Age | Commit message (Collapse) | Author | Files | Lines |
|
Type: fix
Change-Id: I75b20db66fb58e1724a212253c51315836079f4b
Signed-off-by: Filip Varga <fivarga@cisco.com>
|
|
See: https://docs.fd.io/vpp/19.08/nat_ha_doc.html
Type: docs
Change-Id: I43ecf1dfb6976ebafee04d820f0e1b07393a0b93
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Type: feature
The current feature ordering of NAT44 nodes with respect to the
ACL plugin's IPv4 input/output features is:
ip4-output: acl-plugin-out-ip4-fa runs before any NAT44 nodes
ip4-unicast: acl-plugin-in-ip4-fa runs before any NAT44 nodes
ACL rules with action permit+reflect can keep track of outbound
flows and allow the replies inbound without an explicit inbound rule.
If ACL permit+reflect rules are configured on an interface that also
has NAT44 configured with output-feature/postrouting translation of
outbound packets, the ACL rules cannot allow inbound packets. The
ACL state that was stored on the outbound flow contains the IP
addresses of the original packet, prior to translation. The inbound
packets are being evaluated by the ACL node using the translated
addresses.
The order of processing inbound needs to be the opposite of what it
was outbound for this to work. Change the NAT44 features on
ip4-output so that they run before outbound ACL nodes. This matches
the existing behavior of the NAT44 nodes which rewrite
source addresses as an input feature instead of an output feature.
This was only done for endpoint dependent mode because the regular
endpoint independent in2out-output node currently selects an
explicit next node rather than using the next node on the feature
arc.
Unit test added to configure both NAT and an ACL and ensure that
out2in packets matching an in2out flow are permitted by the ACL
and translated by NAT.
Change-Id: Ibd679c28b64c3fc3cc8c0606ea93123e384e839f
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
There was an attempt to fix this problem in the commit:
d3b8c861a44e70c197ab721fa3ce7f38bbeab7fd
But checking the LOCALLY_ORIGINATED flag didn't work because this flag
gets reset before it can reach the NAT nodes.
With this commit, replace the check for the LOCALLY_ORIGINATED flag
with a check to see if the packet is a DHCP broadcast.
Type: fix
Change-Id: I069c08a785b5988b10192f528e4f9c4c7cc2f8a3
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
|
|
Type: fix
Ticket: VPP-1817
Signed-off-by: Filip Varga <fivarga@cisco.com>
Change-Id: Id4d694ce636b0a213e65ce27c32a8150df9af0f8
|
|
Change-Id: Ie2a3c0f44322dd8415603b7ce51bb72d72769c95
Ticket: VPP-1815
Type: refactor
Signed-off-by: Filip Varga <fivarga@cisco.com>
|
|
Type: docs
Signed-off-by: John DeNisco <jdenisco@cisco.com>
Change-Id: I7280e5c5ad10a66c0787a5282291a2ef000bff5f
|
|
Remove NAT's implementation of shallow virtual reassembly with
corresponding CLIs, APIs & tests. Replace with standalone shallow
virtual reassembly provided by ipX-sv-reass* nodes.
Type: refactor
Change-Id: I7e6c7487a5a500d591f6871474a359e0993e59b6
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
And add support for multiple maintainers in JSON schema.
Type: docs
Change-Id: Ice430927ceecf53526a3fdf46c075a95206bf0ac
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Type: feature
- ip-neighbour: generic neighbour handling; APIs, DBs, event handling,
aging
- arp: ARP protocol implementation
- ip6-nd; IPv6 neighbor discovery implementation; separate ND,
MLD, RA
- ip6-link; manage link-local addresses
- l2-arp-term; events separated from IP neighbours, since they are not
the same.
vnet retains just enough education to perform ND/ARP packet
construction.
arp and ip6-nd to be moved to plugins soon.
Change-Id: I88dedd0006b299344f4c7024a0aa5baa6b9a8bbe
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Ticket: VPP-1795
Type: fix
Change-Id: Ib3b5742119d7013c293a11eb3dd1aadf46b422dd
Signed-off-by: Filip Varga <fivarga@cisco.com>
|
|
Type: feature
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I2272521d6e69edcd385ef684af6dd4eea5eaa953
|
|
Type: feature
the fib_source_t enum alone no longer defines the priority and
behaviour, instead each source must be allocated these attributes.
This allows the creation of other sources by the plugins (and
soon over the API).
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I890ee820fbc16079ee417ea1fbc163192806e853
|
|
When a DHCP client is configured on a NAT outside interface with
output feature enabled, DHCP packets will reach the NAT in2out-output
node and will be dropped with "out of ports" reason.
With this commit, allow locally originated DHCP packets to be sent
from a NAT outside interface with output feature enabled.
Type: fix
Change-Id: I47d76b22587f2bf0c7b0b9dfda41c89f8f61d0b4
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
|
|
Type: feature
from the API doc, a table replace is:
"
The use-case is that, for some unspecified reason, the control plane
has a very different set of entries it wants in the table than VPP
currently has. The CP would thus like to 'replace' VPP's current table
only by specifying what the new set of entries shall be, i.e. it is not
going to delete anything that already eixts.
the CP delcartes the start of this procedure with this begin_replace
API Call, and when it has populated all the entries it wants, it calls
the below end_replace API. From this point on it is of coursce free
to add and delete entries as usual.
The underlying mechanism by which VPP implements this replace is
purposefully left unspecified.
"
In the FIB, the algorithm is implemented using mark and sweep.
Algorithm goes:
1) replace_begin: this marks all the entries in that table as 'stale'
2) download all the entries that should be in this table
- this clears the stale flag on those entries
3) signal the table converged: ip_table_replace_end
- this removes all entries that are still stale
this procedure can be used when an agent first connects to VPP,
as an alternative to dump and diff state reconciliation.
Change-Id: I168edec10cf7670866076b129ebfe6149ea8222e
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: fix
Ticket: VPP-1747
Change-Id: If282aae3e584d7017c200f897b99c8a37eb1b2e5
Signed-off-by: Filip Varga <fivarga@cisco.com>
|
|
Type: refactor
Change-Id: I204f3f8eebc5f5d5a377e91262f91c615fd00168
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: feature
fts and trex rely on yaml config files. Verify
that they are valid, so comitters can catch
errors early.
Change-Id: Ide0bb276659119c59bdbbc8b8155e37562a648b8
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Type: fix
Since CentOS 8, RPM build script doesn't accept '#!/usr/bin/env python'
as a valid shebang line. It requires scripts to explicitly chose
between python2 or python3.
Change all to use python3 as suggested by Paul Vinciguerra.
Depends-On: https://gerrit.fd.io/r/23170
Signed-off-by: Renato Botelho do Couto <renato@netgate.com>
Change-Id: Ie72af9f60fd0609e07f05b70f8d96e738b2754d1
|
|
Ticket: VPP-1798
Type: fix
Change-Id: I42f02d5824575720e95b9fc99cfa864252221a82
Signed-off-by: Filip Varga <fivarga@cisco.com>
|
|
Type: fix
Change-Id: I732be02d2e2b854eb589c3fa10f980ef2dbe8dfc
Signed-off-by: Filip Varga <fivarga@cisco.com>
|
|
This reverts commit 0d75f783644a24b219ed79d9f9c17387783f67ca.
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: Iaf33301201897e6646eba2b4157e2a45f5fd30f2
|
|
This reverts commit 9654a37fac7fe2b425576eb0237b8d24ae44e1b1.
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: I93ed5a48303421de43f5494c11db2be9a3c8ce57
|
|
Type: fix
Fixes: 22921
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I4fecce96d027c0ee1797d9d84cfab94b1ecdc02b
|
|
Type: fix
Change-Id: I73895fa0101bd50483160c8dc6faac2c67513077
Signed-off-by: Filip Varga <fivarga@cisco.com>
|
|
Use consistent API types.
Type: fix
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
Change-Id: I5b03e5de111c3a3b8da4e9f02cba0aa99e3ee9f3
|
|
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: Ie15ea8f01846f87cb65e90e8762dc941441fc176
|
|
Type: fix
Change-Id: Iac91c086c4e975f0bada058f40b7b7d4475377f8
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
NAT hasn't worked when NAT interfaces wasn't in
default VRF (fib_index = 0). This issue has been occurred with
interfaces with output-feature in endpoint-dependent mode.
Update VAT commands:
- update nat44_add_del_address_range
- add nat44_interface_add_del_output_feature
Ticket: VPP-1732
Type: fix
Change-Id: Iddea15dde4b948f159a0056d48c55bd917037fd1
Signed-off-by: Dmitry Vakhrushev <dmitry@netgate.com>
|
|
In addition to the external vppapitrace tool, VPP itself supports dumping of API trace files.
In two formats, "custom-dump" and "dump". "dump" gives a human friendly list,
and "custom-dump" is meant to give a list of commands that can be fed to VAT.
This patch only deals with "dump".
Prior to this fix, auto-generation was only done for the basic types.
This fix adds support for any type, including lists, and supports pretty-printing
of enums, strings, IP addresses, MAC addresses and so on.
Usage: api trace dump <api-trace-file>
For example
Change-Id: I4e485680e6dcfce7489299ae6cf31d835071ac40
---------- trace 48 -----------
vl_api_sw_interface_set_flags_t:
_vl_msg_id: 75
client_index: 0
context: 10
sw_if_index: 1
flags: IF_STATUS_API_FLAG_ADMIN_UP
---------- trace 49 -----------
vl_api_sw_interface_add_del_address_t:
_vl_msg_id: 88
client_index: 0
context: 11
sw_if_index: 1
is_add: 1
del_all: 0
prefix: 172.16.1.1/24
---------- trace 51 -----------
vl_api_cli_inband_t:
_vl_msg_id: 819
client_index: 0
context: 13
cmd: packet-generator capture pg0 pcap /tmp/vpp-unittest-TestMAP-YhcmDX/pg0_out.pcap disable
---------- trace 58 -----------
vl_api_ip_neighbor_add_del_t:
_vl_msg_id: 199
client_index: 0
context: 20
is_add: 1
neighbor:
sw_if_index: 2
flags: IP_API_NEIGHBOR_FLAG_NONE
mac_address: 0202.0000.ff02
ip_address: fd01:2::2
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: I5556d06008de2762e7c2d35a8b0963ae670b3db1
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Signed-off-by: Ole Troan <ot@cisco.com>
Signed-off-by: Ole Troan <ot@cisco.com>
Signed-off-by: Ole Troan <ot@cisco.com>
Signed-off-by: Ole Troan <ot@cisco.com>
Signed-off-by: Ole Troan <ot@cisco.com>
Signed-off-by: Ole Troan <ot@cisco.com>
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
This is needed for macos where /usr/bin/python[23] does not exist
and /usr/bin is write protected
Type: fix
Change-Id: Ia1b3c732248c78482993de532fa2ea96e376d90a
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
Enforce that variable length fields are the last element of API messages.
Add a 'fixed' version of string type, since dealing with
multiple variable length strings turned out too painful
for the C language bindings.
The string type is now:
{
string name[64]; // NUL terminated C-string. Essentially decays to u8 name[64]
string name[]; // Variable length string with embedded len field (vl_api_string_t)
};
The latter notation could be made available to other types as well.
e.g.
{
vl_api_address_t addresses[];
}
instead of
{
u32 n_addr;
vl_api_address_t addresses[n_addr];
};
Type: fix
Change-Id: I18fa17ef47227633752ab50453e8d20a652a9f9b
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
- Relocate plugin tests for 'make test' into
src/plugins/*/test so that plugin test cases
are co-located with the plugin source code.
Type: refactor
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
Change-Id: I503e6a43528e14981799b735fa65674155713f67
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
|
|
Type: feature
Change-Id: I5c5af6f9acb340cc674323305104b8ce23e6d21d
Signed-off-by: Filip Varga <fivarga@cisco.com>
|
|
vppapigen has remapped legacy to typedefs behind the scenes
for some time now.
- update .api files to use new style typedefs.
- issue error on 'typeonly define' in .api files
- remove unneeded macros redefining vl_noop_handler
Type: refactor
Change-Id: I7a8c4a6dafacee6a131f95cd0e9b03a8c60dea8b
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Type: fix
Change-Id: Ib9164d8f6c681e8900e645306f3a2dc0ac0e40a8
Signed-off-by: Filip Varga <filipvarga89@gmail.com>
|
|
Type: fix
Change-Id: I04f136a04bc022d223e4bcb5c59920bd1f1fd560
Signed-off-by: Filip Varga <filipvarga89@gmail.com>
|
|
Type: fix
Change-Id: Ie5befde2f23caffb033b3b9f35ac1535c1224925
Signed-off-by: Filip Varga <fivarga@cisco.com>
|
|
Type: feature
Change-Id: Id818f86164acabcb732e9a65d0e284d68e747a7b
Signed-off-by: Filip Varga <fivarga@cisco.com>
|
|
tag should be added at the end of the reply message instead of
overwriting the original data.
Type: fix
Fixed: dd1e3e780c
Change-Id: I4b31cf3a4a41b49ea9039a9398114dbf49a53e57
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
If the corresponding vpp plugin is absent, return a non-zero
clib_error_t * from vat_plugin_register ("xxx plugin not loaded"). The
vat plugin calls dlclose on the vat plugin, and it disappears.
Depending on the plugin configuration, this can reduce the vpp virtual
size by several gigabytes.
Added a VAT_PLUGIN(<plugin-name>) macro to vat_helper_macros, clean up
boilerplate vat_plugin_register() implementations. Fixed a number of
non-standard vat_plugin_register methods.
Type: refactor
Change-Id: Iac908e5af7d5497c78d6aa9c3c51cdae08374045
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
format_vl_api_prefix_t returns a dict with keys 'address' and 'address_length',
but other format_vl_api_prefix functions return a dict with 'prefix', and 'len'.
Refactor all format_vl_api_prefix_t to return consistent keys 'address' and 'len'.
Type: refactor
Change-Id: I5f9558fc2da8742a303266e011102f5b2db80aad
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
using inlines exposes the users to the internal data types used by VPP, namely vec.h. This file does not compile with a C++ compiler.
Type: feature
Change-Id: I1544fdd9eae998309f865df61df78571bdb96903
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Previous use of strndup() required user to remember to call free().
Now return a vector pointing directly to the API message string.
Of course user must remember to copy the string out if lifetime
is longer than API message lifetime.
Change-Id: Ib5e2b3d52d258e1a42ea9ea9a9e04abbe360e2bf
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Change-Id: I2d1e2addb2e440c23c255ac7709169f7909cb0be
Signed-off-by: Filip Varga <fivarga@cisco.com>
|
|
Change-Id: I4dbeed0b94003a698e9218648d4b352db6fbb70e
Signed-off-by: dongjuan <dong.juan1@zte.com.cn>
|
|
Change-Id: Iac6bd29389839c9eb8c1ff2105b4da69b6e1ce3e
Signed-off-by: jackiechen1985 <xiaobo.chen@tieto.com>
|
|
Change-Id: I70817579a09a7026f5fa7c8e71babded891ea285
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
|
|
It defaults to using interface-output as the next node. If other
output features are enabled on the ip4-output arc, they get skipped.
That makes me sad.
Change-Id: I3f4d3320fb8092918e1e0663c66baca1c74c26ec
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
We must do lock fib while vrf id ~0, otherwise it crashes while unlocking fib.
Change-Id: Iec9754ccd67634a132bc5384a4f796d4a65943ae
Signed-off-by: jackiechen1985 <xiaobo.chen@tieto.com>
|