aboutsummaryrefslogtreecommitdiffstats
path: root/src/plugins/rdma
AgeCommit message (Collapse)AuthorFilesLines
2020-06-01ethernet: fix DMAC check and skip unnecessary ones (VPP-1868)John Lo1-4/+13
Fix and optimize DMAC check in ethernet-input node to utilize NIC or driver which support L3 DMAC-filtering mode so that DMAC check can be bypassed safely for interfaces/sub-interfaces in L3 mode. Checking of interface in L3-DMAC-filtering state to avoid DMAC check require the following: a) Fix interface driver init sequence for devices which supports L3 DMAC-filtering to indicate its capability and initialize interface to L3 DMAC-filtering state. b) Fix ethernet_set_flags() function and its associated callback flags_change() functions registered by various drivers in interface infra to provide proper L3 DMAC filtering status. Maintain interface/sub-interface L3 config count so DMAC checks can be bypassed if L3 forwarding is not setup on any main/sub-interfaces. Type: fix Ticket: VPP-1868 Signed-off-by: John Lo <loj@cisco.com> Change-Id: I204d90459c13e9e486cfcba4e64e3d479bc9f2ae (cherry picked from commit 4a302ee7c75f3d4fd1a73a9d1f6c34b3bde8d620)
2020-05-07rdma: fix alignment issueDamjan Marion1-2/+2
Type: fix Change-Id: I0ff7a6f3354066c2252c1ebd0d43ac59db278bf0 Signed-off-by: Damjan Marion <damarion@cisco.com> Signed-off-by: Elias Rudberg <elias.rudberg@bahnhof.net>
2020-05-06rdma: fix clang buildBenoît Ganne1-2/+9
Type: fix Change-Id: I9b613f0af484f601dd20a851e2f59ee5e06b5c37 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2020-04-27rdma: tx: interleave prefetchesBenoît Ganne1-24/+13
Type: improvement Change-Id: Ic2d9b17cf5e524f3ad2a3c5343fe1230aa360e73 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2020-03-31rdma: print device info from PCI VPD in 'show hardware' outputDamjan Marion1-0/+14
Type: improvement Change-Id: I275bbca17c5a0263b3e017b48aa6ccd8f59bc7c3 Signed-off-by: Damjan Marion <damarion@cisco.com>
2020-03-20rdma: ring db only once per vector on txBenoît Ganne1-28/+44
Type: improvement Change-Id: I09b017d60bc38ff8a4a7a73aff42b27611bd8955 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2020-03-16rdma: optimize tx wqe_initDamjan Marion3-13/+33
Type: improvement Change-Id: I7f28a3f03ab1ea8461c52743c61dc23a57965237 Signed-off-by: Damjan Marion <damarion@cisco.com>
2020-03-16rdma: introduce direct verb for Cx4/5 txBenoît Ganne4-73/+549
Direct Verb allows for direct access to NIC HW rx/tx rings. This patch introduce TX direct verb support for Mellanox ConnectX-4/5 adapters. 'dv' mode must be explicitely selected at interface creation to benefit from this. Type: feature Change-Id: If830ba9f33db73299acdbddc68b5c09eaf6add98 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2020-03-16rdma: add Mellanox mlx5 Direct Verbs receive supportDamjan Marion6-37/+843
Type: feature Change-Id: I3f287ab536a482c366ad7df47e1c04e640992ebc Signed-off-by: Damjan Marion <damarion@cisco.com>
2020-03-02rdma: improve rx loopDamjan Marion1-38/+16
Type: improvement Change-Id: If81847bc0c92d167ce03e1e94a2f8e18f8154af2 Signed-off-by: Damjan Marion <damarion@cisco.com>
2020-03-02rdma: improve refillDamjan Marion1-65/+57
Type: improvement Change-Id: Ib9921718ec88e6dc56a38e40a140f16f86ed2e44 Signed-off-by: Damjan Marion <damarion@cisco.com>
2020-03-02rdma: use per-thread buffer templateDamjan Marion3-5/+25
Type: improvement Change-Id: Ie6f2c79e0a769f70eab079c75a500b9308dd51e6 Signed-off-by: Damjan Marion <damarion@cisco.com>
2020-02-18rdma: fix bug related to ring bufferElias Rudberg1-2/+2
Fix a bug that caused some input packets to be dropped due to errors of the type 'ip4 length > l2 length'. The change is related to the second call to the rdma_device_input_bufs() function that happens when the end of the ring buffer is reached. Type: fix Change-Id: I332d69ab22242b3443a0baca6e5dd86349a54765 Signed-off-by: Elias Rudberg <elias.rudberg@bahnhof.net>
2020-01-08rdma: api: prepare support for direct verbBenoît Ganne7-10/+79
Prepare rdma interface creation API for direct verb support: - add new optional 'mode' parameters to select between ibverb or direct verb backend (optional, default to 'auto') - set default value for rxq_num (1), rxq_size (1024) and txq_size (1024) so they are now optional - bump default create value for rxq_size and txq_size to 1024 if unset (0) so they are coherent with default values above Type: feature Change-Id: Id9eae2b8eb0baaf34a0fcd55da6ad09515f57a93 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2020-01-08rdma: add FEATURE.yamlBenoît Ganne1-0/+8
Type: docs Change-Id: I91d701814e4bd9953616d2b7c76ae2ea7c07074b Signed-off-by: Benoît Ganne <bganne@cisco.com>
2019-12-12rdma: add explicit types in apiOle Troan1-2/+3
Type: fix Signed-off-by: Ole Troan <ot@cisco.com> Change-Id: I80c674b73b7f86cf159b8779aab31a87b20def9a
2019-11-08rdma: fix next node rx redirectBenoît Ganne1-8/+2
Type: fix Change-Id: I694db40c3a0361852d01b84c7a45e32e39e9f4af Signed-off-by: Benoît Ganne <bganne@cisco.com>
2019-11-08rdma: fix name auto-generation on createBenoît Ganne1-1/+5
When creating rdma interface without specifying a name, we need to generate one instead of NULL. Type: fix Change-Id: If41870691dec47e8e673d48ac4b4ddffd2385a03 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2019-10-23rdma: build: fix ibverb compilation testBenoît Ganne1-5/+3
Type: fix Change-Id: Ib6389ecbcf4a1b7bae25b2bd9e7fbdec49545aaa Signed-off-by: Benoît Ganne <bganne@cisco.com>
2019-10-16rdma: add rdma APIBenoît Ganne8-29/+401
Type: feature Change-Id: I590612989cb3c114f8d99227ad36c3434e998597 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2019-10-07rdma: fix crash when failing to read pci addr on createBenoît Ganne1-0/+3
Type: fix Change-Id: I543e2e5976cb384b81278a7ec98a0a6ab1612438 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2019-10-07rdma: fix crash when failing to detect numa node on createBenoît Ganne1-0/+5
Type: fix Change-Id: Ibb8e7c1c13869c1dce2385f58bd7260fcf776c5a Signed-off-by: Benoît Ganne <bganne@cisco.com>
2019-10-06rdma: prevent loopback of broadcast packetsBenoît Ganne1-4/+9
TX queues must be created before RX queues on Mellanox cards in order to not receive our own broadcast packets. Type: fix Change-Id: I32ae25a47d819f715feda621a5ecddcf4efd71ba Signed-off-by: Benoît Ganne <bganne@cisco.com>
2019-10-05rdma: make sure pci subsystem is initializedBenoît Ganne1-1/+6
The rdma driver use the pci subsystem, make sure the dependency is recorded. Type: fix Change-Id: Ibd613f623d355612881acc31b9423f2de13793a3 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2019-10-01rdma: fix non-NULL terminated C-string overflowBenoît Ganne2-3/+3
Type: fix Change-Id: I584777825636347c116bd084e348858bcb1b7d75 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2019-09-24vlib: add flag to explicitelly mark nodes which can init per-node packet traceDamjan Marion1-0/+1
Type: feature Change-Id: I913f08383ee1c24d610c3d2aac07cef402570e2c Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-08-27rdma: fix pending packets check on txBenoît Ganne1-1/+1
Fix coverity CID 203636: Control flow issues (NO_EFFECT). This greater-than-or-equal-to-zero comparison of an unsigned value is always true. "n_left_from >= 0U". Type: fix Fixes: e7e8bf37f100b20acb99957572f1796f648c2853 Change-Id: Ibbf8c82defb12d6d532345eea657d5f300e6a514 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2019-08-26rdma: use rings for buffers managementBenoît Ganne5-203/+243
Refactor rdma driver for improved performance and prepare for raw datapath access. Type: refactor Change-Id: Iae31872055a6947708ea9f430bd1dc083ea63b5a Signed-off-by: Benoît Ganne <bganne@cisco.com>
2019-08-19rdma: add support for MAC changesBenoît Ganne2-1/+35
Type: feature Change-Id: I5803b52d12e56f2ccc1316e89ece6f1c5898810a Signed-off-by: Benoît Ganne <bganne@cisco.com>
2019-08-19rdma: add support for input feature arcsBenoît Ganne1-29/+35
Input feature arcs enable functions such as l2patch or bonding. Type: feature Change-Id: Ie333c9b8f7ea20f8a3a409a9a06367807e215a57 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2019-08-07rdma: add missing symbolsBenoît Ganne1-2/+4
rdma-core-25.0 move some symbol to another library, make sure we link to it. Type: fix Fixes: ec757593859bd8c16839ea8a81a2ef4eb8b29539 Change-Id: I6b8a56ea5fc7787d3de0982015ed47b767557c06 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2019-08-06rdma: fix double-free in rdma-txBenoît Ganne2-9/+10
In case of tx success after multiple retries, the last buffers to be enqueued will be both enqueued for tx and freed. Type: fix Fixes: 211ef2eb24 Change-Id: I57d218cff58b74c1f3d6dc5722624327f0821758 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2019-07-23api: binary api cleanupDave Barach1-1/+1
Multiple API message handlers call vnet_get_sup_hw_interface(...) without checking the inbound sw_if_index. This can cause a pool_elt_at_index ASSERT in a debug image, and major disorder in a production image. Given that a number of places are coded as follows, add an "api_visible_or_null" variant of vnet_get_sup_hw_interface, which returns NULL given an invalid sw_if_index, or a hidden sw interface: - hw = vnet_get_sup_hw_interface (vnm, sw_if_index); + hw = vnet_get_sup_hw_interface_api_visible_or_null (vnm, sw_if_index); if (hw == NULL || memif_device_class.index != hw->dev_class_index) return clib_error_return (0, "not a memif interface"); Rename two existing xxx_safe functions -> xxx_or_null to make it obvious what they return. Type: fix Change-Id: I29996e8d0768fd9e0c5495bd91ff8bedcf2c5697 Signed-off-by: Dave Barach <dave@barachs.net>
2019-07-18vlib: convert frame_index into real pointersAndreas Schultz1-1/+1
The fast path almost always has to deal with the real pointers. Deriving the frame pointer from a frame_index requires a load of the 32bit frame_index from memory, another 64bit load of the heap base pointer and some calculations. Lets store the full pointer instead and do a single 64bit load only. This helps avoiding problems when the heap is grown and frames are allocated below vm->heap_aligned_base. Type: refactor Change-Id: Ifa6e6e984aafe1e2755bff80f0a4dfcddee3623c Signed-off-by: Andreas Schultz <andreas.schultz@travelping.com> Signed-off-by: Dave Barach <dave@barachs.net>
2019-05-24rdma: add support for promiscuous modeBenoît Ganne2-71/+145
rdma interfaces filter packets per MAC by default to share the physical interface between multiple users (eg. VPP and Linux). When configured in promiscuous mode, all packets will go to this interface, regardless of the MAC. All other interface will not receive anymore packet while it is in promiscuous mode. Promiscuous mode is needed (and automatically turned on) for L2 path (l2patch, xconnect, bridge...). Change-Id: I4c0eb4421f51d116e635e7828d00f202f4a97ded Signed-off-by: Benoît Ganne <bganne@cisco.com>
2019-05-14rdma: update MAINTAINERS and add docBenoît Ganne1-0/+51
Change-Id: Ida681d299fd57eba66338444b99d2476bdb3c695 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2019-05-03plugins: clean up plugin descriptionsDave Wallace1-1/+1
- Make plugin descriptions more consistent so the output of "show plugin" can be used in the wiki. Change-Id: I4c6feb11e7dcc5a4cf0848eed37f1d3b035c7dda Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2019-04-09rdma: add multiqueue supportBenoît Ganne4-76/+170
Add support for multiqueue for RDMA devices. Change-Id: I78a2481cec6747494c670cc776475828be3af55b Signed-off-by: Benoît Ganne <bganne@cisco.com>
2019-04-05rdma: more batching, compile rdma-core in release modeBenoît Ganne3-101/+299
rx: add batching for WC processing and release tx: improve batching for WC submission and processing rdma-core: compile in release mode to remove assert() Change-Id: I5fb8736db36b50f8b758cd688100477b67e72d80 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2019-04-03rdma: tx: fix stats and add batchingBenoît Ganne1-61/+88
Tx stats are no longer counted twice. Submit tx packets as a single batch per vector instead of per-packet Change-Id: I26820b21f23842b3a67ace0b939095f3550d3856 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2019-03-29rdma: add option to specify inteface nameDamjan Marion4-2/+12
Change-Id: Ic6244511b88bdd42756f74e3163a70b8014e8547 Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-03-28cmake: add vpp_plugin_find_library macroDamjan Marion1-10/+10
Change-Id: I0b996460e05c40e74766563fb2a94c62a65063ce Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-03-28Add RDMA ibverb driver pluginBenoît Ganne8-0/+1401
RDMA ibverb is a userspace API to efficiently rx/tx packets. This is an initial, unoptimized driver targeting Mellanox cards. Next steps should include batching, multiqueue and additional cards. Change-Id: I0309c7a543f75f2f9317eaf63ca502ac7a093ef9 Signed-off-by: Benoît Ganne <bganne@cisco.com>