summaryrefslogtreecommitdiffstats
path: root/src/plugins/rdma
AgeCommit message (Collapse)AuthorFilesLines
2021-10-13docs: convert plugins doc md->rstNathan Skrzypczak2-75/+102
Type: improvement Change-Id: I7e821cce1feae229e1be4baeed249b9cca658135 Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
2021-08-20rdma: decrease inliningBenoît Ganne1-26/+19
Remove aggressive inlining outside of the main loop to improve build time (from 146s to 22s). Type: refactor Change-Id: I3824516a85b5e8d02894e66f19d891569c1a68fb Signed-off-by: Benoît Ganne <bganne@cisco.com>
2021-07-15misc: replace CLIB_PREFETCH with clib_prefetch_{load,store}Damjan Marion1-4/+4
Type: refactor Change-Id: Id10cbf52e8f2dd809080a228d8fa282308be84ac Signed-off-by: Damjan Marion <damarion@cisco.com>
2021-06-30rdma: fix chained buffer tx path in dv modeBenoît Ganne1-24/+20
When switching to the direct verb chain buffer tx path, we must account for all remaining packets, including the packets that would wrapped around. Previously we were using the 'n' counter but ignoring the 'n_wrap' counter: if some packets would have wrapped around in the default path, it would be ignored by the chained buffer tx path. Compute the correct number of remaining packets based on the old and current txq tail instead. Also simplify the chained tx function parameters. Type: fix Change-Id: If12b41a8f143fda80290342e2904792f7501c559 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2021-05-04rdma: add support for RSS configurationBenoît Ganne7-14/+338
Type: feature Change-Id: I911ee94b624ef5edf46b34666597eff93df1d1ed Signed-off-by: Benoît Ganne <bganne@cisco.com>
2021-05-04rdma: support non-power-of-2 number of rxqBenoît Ganne1-13/+19
Type: improvement Change-Id: I7b78a8470aa3fd271120587d08e82afb23cb195b Signed-off-by: Benoît Ganne <bganne@cisco.com>
2021-05-03rdma: avoid unnencessary inliningDamjan Marion1-27/+29
Type: fix Change-Id: Ifc4b30675365ebb5d69c018a34fd17a5090b30e1 Signed-off-by: Damjan Marion <damarion@cisco.com>
2021-04-30build: declare some CMake variables as advancedDamjan Marion1-1/+1
Type: make Change-Id: I780c1c81a50cb92bc89c05856efd8ef88479c0ab Signed-off-by: Damjan Marion <damarion@cisco.com>
2021-04-14rdma: remove redundant memory registrationBenoît Ganne1-6/+0
The memory region is already registered right above, looks like a copy/paste error. Type: fix Change-Id: I97aed821e719e1a34ac38c86d0473a8fdd671d4e Signed-off-by: Benoît Ganne <bganne@cisco.com>
2021-04-14rdma: fix skip_ipv4_cksum behavior in scalar pathTianyu Li1-1/+1
Current rdma input L3 validating behavior for scalar path is: if any packet L3_OK flag matches, then unset skip_ip4_cksum. The correct behavior should be if any packet L3_OK NOT match, then unset skip_ip4_cksum. The logic is also different from the vector path. This patch fixes the wrong behavior for scalar path. Type: fix Signed-off-by: Tianyu Li <tianyu.li@arm.com> Change-Id: I5ca5ed3aa0c07d441f3c87b33f03ea8f7a3c9826
2021-03-25rdma: fix buggy cqe parsing (truncated packets)Mohammed Hawari1-3/+2
Change-Id: I17228bd35cc7aa0d207a16502bf1376c75675302 Signed-off-by: Mohammed Hawari <mohammed@hawari.fr> Type: fix
2021-03-19interface: add capabilities flagsMohsin Kazmi1-2/+2
Type: improvement This patch adds flags to represent the modern NICs capabilities. Change-Id: I96d38d9ab7eac55974d72795cd100d8337168e1e Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2021-02-15rdma: rdma_log__ argument dev is a pointerVratko Polak1-5/+8
Also apply style edits as proprosed by checkstyle. Ticket: VPP-1971 Type: fix Change-Id: I4332a4e32220f3076b4a373da01cc0022cde32f5 Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2021-01-21rdma: adapt to new vnet rxq frameworkMohammed Hawari3-27/+30
Change-Id: Id539d36635f0ab9625dc2fc73630be39bead09af Signed-off-by: Mohammed Hawari <mohammed@hawari.fr> Type: improvement
2020-11-25rdma: fixed UAR writing at txMohammed Hawari1-1/+1
Change-Id: Id81b4d27845c4e91cef90a4b8649662942d3cba1 Signed-off-by: Mohammed Hawari <mohammed@hawari.fr> Type: fix
2020-11-13rdma: implement multiseg rx without striding rqMohammed Hawari8-65/+470
Change-Id: I623617ad3c80610805dd3cf2a5f371e6677f4844 Signed-off-by: Mohammed Hawari <mohammed@hawari.fr> Type: improvement
2020-11-09vlib: fix trace number accountingBenoît Ganne1-15/+12
When using classifier to filter traces, not all packets will be traced. In that case, we should only count traced packets. Type: fix Change-Id: I87d1e217b580ebff8c6ade7860eb43950420ae78 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2020-11-04rdma: various fixes for chained buffers txMohammed Hawari1-14/+19
Type: fix Signed-off-by: Mohammed Hawari <mohammed@hawari.fr> Change-Id: I428c87e581db335362fef30e274db8947a896416
2020-10-26rdma: fix clang-11 buildDamjan Marion1-1/+1
/vpp/src/plugins/rdma/rdma.h:203:17: error: field 'buffer_template' with variable sized type 'vlib_buffer_t' not at the end of a struct or class is a GNU extension [-Werror,-Wgnu-variable-sized-type-not-at-end] vlib_buffer_t buffer_template; Type: fix Change-Id: I4661839f262e01fe274a2ee7b3cb70f9bc6b7c62 Signed-off-by: Damjan Marion <damarion@cisco.com>
2020-10-24rdma: implement striding rq for multiseg rxMohammed Hawari4-130/+433
This change leverages the striding RQ feature of ConnectX-5 adapters to support chained buffers on the RX path. In Striding RQ mode, WQE are SG lists of data segments, each mapped to a vlib_buffer. When a packet is received, it can consume one or multiple data segments belonging to the WQE, without wasting the whole WQE. Change-Id: I74eba5b2c2c66538e75e046335058ba011cb27fd Type: improvement Signed-off-by: Mohammed Hawari <mohammed@hawari.fr>
2020-10-24rdma: add RSS support for IPv6 and TCPBenoît Ganne2-32/+58
Type: feature Change-Id: I8b0d918e6f13325954b29bf34e4ef224c1315c51 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2020-08-31rdma: bugfix in the descriptor refill logic. In case of a partial ↵Mohammed Hawari1-1/+1
allocation, the remainder modulo 8 must be returned to the pool so that the number of kept buffers is a multiple of 8. Type: fix Change-Id: Ifd97b03ea220300e7e6fe81a8ff4a25060fea6c1 Signed-off-by: Mohammed Hawari <mohammed@hawari.fr>
2020-05-27ethernet: fix DMAC check and skip unnecessary ones (VPP-1868)John Lo1-4/+13
Fix and optimize DMAC check in ethernet-input node to utilize NIC or driver which support L3 DMAC-filtering mode so that DMAC check can be bypassed safely for interfaces/sub-interfaces in L3 mode. Checking of interface in L3-DMAC-filtering state to avoid DMAC check require the following: a) Fix interface driver init sequence for devices which supports L3 DMAC-filtering to indicate its capability and initialize interface to L3 DMAC-filtering state. b) Fix ethernet_set_flags() function and its associated callback flags_change() functions registered by various drivers in interface infra to provide proper L3 DMAC filtering status. Maintain interface/sub-interface L3 config count so DMAC checks can be bypassed if L3 forwarding is not setup on any main/sub-interfaces. Type: fix Ticket: VPP-1868 Signed-off-by: John Lo <loj@cisco.com> Change-Id: I204d90459c13e9e486cfcba4e64e3d479bc9f2ae
2020-05-07rdma: fix alignment issueDamjan Marion1-2/+2
Type: fix Change-Id: I0ff7a6f3354066c2252c1ebd0d43ac59db278bf0 Signed-off-by: Damjan Marion <damarion@cisco.com> Signed-off-by: Elias Rudberg <elias.rudberg@bahnhof.net>
2020-05-06rdma: fix clang buildBenoît Ganne1-2/+9
Type: fix Change-Id: I9b613f0af484f601dd20a851e2f59ee5e06b5c37 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2020-04-27rdma: tx: interleave prefetchesBenoît Ganne1-24/+13
Type: improvement Change-Id: Ic2d9b17cf5e524f3ad2a3c5343fe1230aa360e73 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2020-03-31rdma: print device info from PCI VPD in 'show hardware' outputDamjan Marion1-0/+14
Type: improvement Change-Id: I275bbca17c5a0263b3e017b48aa6ccd8f59bc7c3 Signed-off-by: Damjan Marion <damarion@cisco.com>
2020-03-20rdma: ring db only once per vector on txBenoît Ganne1-28/+44
Type: improvement Change-Id: I09b017d60bc38ff8a4a7a73aff42b27611bd8955 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2020-03-16rdma: optimize tx wqe_initDamjan Marion3-13/+33
Type: improvement Change-Id: I7f28a3f03ab1ea8461c52743c61dc23a57965237 Signed-off-by: Damjan Marion <damarion@cisco.com>
2020-03-16rdma: introduce direct verb for Cx4/5 txBenoît Ganne4-73/+549
Direct Verb allows for direct access to NIC HW rx/tx rings. This patch introduce TX direct verb support for Mellanox ConnectX-4/5 adapters. 'dv' mode must be explicitely selected at interface creation to benefit from this. Type: feature Change-Id: If830ba9f33db73299acdbddc68b5c09eaf6add98 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2020-03-16rdma: add Mellanox mlx5 Direct Verbs receive supportDamjan Marion6-37/+843
Type: feature Change-Id: I3f287ab536a482c366ad7df47e1c04e640992ebc Signed-off-by: Damjan Marion <damarion@cisco.com>
2020-03-02rdma: improve rx loopDamjan Marion1-38/+16
Type: improvement Change-Id: If81847bc0c92d167ce03e1e94a2f8e18f8154af2 Signed-off-by: Damjan Marion <damarion@cisco.com>
2020-03-02rdma: improve refillDamjan Marion1-65/+57
Type: improvement Change-Id: Ib9921718ec88e6dc56a38e40a140f16f86ed2e44 Signed-off-by: Damjan Marion <damarion@cisco.com>
2020-03-02rdma: use per-thread buffer templateDamjan Marion3-5/+25
Type: improvement Change-Id: Ie6f2c79e0a769f70eab079c75a500b9308dd51e6 Signed-off-by: Damjan Marion <damarion@cisco.com>
2020-02-18rdma: fix bug related to ring bufferElias Rudberg1-2/+2
Fix a bug that caused some input packets to be dropped due to errors of the type 'ip4 length > l2 length'. The change is related to the second call to the rdma_device_input_bufs() function that happens when the end of the ring buffer is reached. Type: fix Change-Id: I332d69ab22242b3443a0baca6e5dd86349a54765 Signed-off-by: Elias Rudberg <elias.rudberg@bahnhof.net>
2020-01-08rdma: api: prepare support for direct verbBenoît Ganne7-10/+79
Prepare rdma interface creation API for direct verb support: - add new optional 'mode' parameters to select between ibverb or direct verb backend (optional, default to 'auto') - set default value for rxq_num (1), rxq_size (1024) and txq_size (1024) so they are now optional - bump default create value for rxq_size and txq_size to 1024 if unset (0) so they are coherent with default values above Type: feature Change-Id: Id9eae2b8eb0baaf34a0fcd55da6ad09515f57a93 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2020-01-08rdma: add FEATURE.yamlBenoît Ganne1-0/+8
Type: docs Change-Id: I91d701814e4bd9953616d2b7c76ae2ea7c07074b Signed-off-by: Benoît Ganne <bganne@cisco.com>
2019-12-12rdma: add explicit types in apiOle Troan1-2/+3
Type: fix Signed-off-by: Ole Troan <ot@cisco.com> Change-Id: I80c674b73b7f86cf159b8779aab31a87b20def9a
2019-11-08rdma: fix next node rx redirectBenoît Ganne1-8/+2
Type: fix Change-Id: I694db40c3a0361852d01b84c7a45e32e39e9f4af Signed-off-by: Benoît Ganne <bganne@cisco.com>
2019-11-08rdma: fix name auto-generation on createBenoît Ganne1-1/+5
When creating rdma interface without specifying a name, we need to generate one instead of NULL. Type: fix Change-Id: If41870691dec47e8e673d48ac4b4ddffd2385a03 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2019-10-23rdma: build: fix ibverb compilation testBenoît Ganne1-5/+3
Type: fix Change-Id: Ib6389ecbcf4a1b7bae25b2bd9e7fbdec49545aaa Signed-off-by: Benoît Ganne <bganne@cisco.com>
2019-10-16rdma: add rdma APIBenoît Ganne8-29/+401
Type: feature Change-Id: I590612989cb3c114f8d99227ad36c3434e998597 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2019-10-07rdma: fix crash when failing to read pci addr on createBenoît Ganne1-0/+3
Type: fix Change-Id: I543e2e5976cb384b81278a7ec98a0a6ab1612438 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2019-10-07rdma: fix crash when failing to detect numa node on createBenoît Ganne1-0/+5
Type: fix Change-Id: Ibb8e7c1c13869c1dce2385f58bd7260fcf776c5a Signed-off-by: Benoît Ganne <bganne@cisco.com>
2019-10-06rdma: prevent loopback of broadcast packetsBenoît Ganne1-4/+9
TX queues must be created before RX queues on Mellanox cards in order to not receive our own broadcast packets. Type: fix Change-Id: I32ae25a47d819f715feda621a5ecddcf4efd71ba Signed-off-by: Benoît Ganne <bganne@cisco.com>
2019-10-05rdma: make sure pci subsystem is initializedBenoît Ganne1-1/+6
The rdma driver use the pci subsystem, make sure the dependency is recorded. Type: fix Change-Id: Ibd613f623d355612881acc31b9423f2de13793a3 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2019-10-01rdma: fix non-NULL terminated C-string overflowBenoît Ganne2-3/+3
Type: fix Change-Id: I584777825636347c116bd084e348858bcb1b7d75 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2019-09-24vlib: add flag to explicitelly mark nodes which can init per-node packet traceDamjan Marion1-0/+1
Type: feature Change-Id: I913f08383ee1c24d610c3d2aac07cef402570e2c Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-08-27rdma: fix pending packets check on txBenoît Ganne1-1/+1
Fix coverity CID 203636: Control flow issues (NO_EFFECT). This greater-than-or-equal-to-zero comparison of an unsigned value is always true. "n_left_from >= 0U". Type: fix Fixes: e7e8bf37f100b20acb99957572f1796f648c2853 Change-Id: Ibbf8c82defb12d6d532345eea657d5f300e6a514 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2019-08-26rdma: use rings for buffers managementBenoît Ganne5-203/+243
Refactor rdma driver for improved performance and prepare for raw datapath access. Type: refactor Change-Id: Iae31872055a6947708ea9f430bd1dc083ea63b5a Signed-off-by: Benoît Ganne <bganne@cisco.com>