summaryrefslogtreecommitdiffstats
path: root/src/plugins/unittest/fib_test.c
AgeCommit message (Collapse)AuthorFilesLines
2023-05-19fib: fix load-balance and replicate dpos buckets overflowBenoît Ganne1-44/+79
load-balance and replicate dpos both store their number of buckets as u16, which can overflow if too many paths are configured. For load-balance it can happens quite quickly because of weights normalization. Type: fix Change-Id: I0c78c39fc3d40626dfc58b49e7d99d71f9852b50 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2022-04-04vppinfra: make _vec_len() read-onlyDamjan Marion1-2/+2
Use of _vec_len() to set vector length breaks address sanitizer. Users should use vec_set_len(), vec_inc_len(), vec_dec_len () instead. Type: improvement Change-Id: I441ae948771eb21c23a61f3ff9163bdad74a2cb8 Signed-off-by: Damjan Marion <damarion@cisco.com>
2022-02-16fib: Use the same adjacency that BFD is usingNeale Ranns1-2/+4
Type: improvement When the adj subsystem is notified of a BFD session, it attempts to find the appropriate adjacency from the session's key. This could lead to a mismatch between the adj used by BFD and that of FIB. The BFD session stores the adj it is using, so FIB uses that instead. Since adj is now using the same adj as BFD, it does not need to maintain its own locks. In BFD it is necessary to initialise the adj index used in INVALID and ensure it is not unlock before listeners are notified of the session delete. Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: I9630867b10bb18969475299a0c754942a8df0f44
2022-02-10tests: Fix the FIB UTNeale Ranns1-25/+26
Type: test The FIB UT fails in debug mode because there is no string associated woth its fib_node_type_t. Change the tests to register their own type, which will give it a name. Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: I36e546718faa7241c088494cbae10939aca51d5a
2022-01-07ethernet: new interface registration functionDamjan Marion1-14/+12
Prep for supporting multiple callbacks, optional args, etc. Type: improvement Change-Id: I96244c098712e8213374678623f12527b0e7f387 Signed-off-by: Damjan Marion <damarion@cisco.com>
2021-11-23ip: unlock_fib on if deleteNathan Skrzypczak1-26/+17
On interface delete we were not removing the lock taken by a previous ip_table_bind() call thus preventing the VRFs to be removed. Type: fix Change-Id: I11abbb51a09b45cd3390b23d5d601d029c5ea485 Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
2021-10-11ip: fix fib and mfib locksNathan Skrzypczak1-2/+2
This patches fixes an issue that could cause fib locks to underflow: if an API user deletes a fib and quickly recreates it, the fib may not have been actually deleted. As a result, the lock would not be incremented on the create call leading to the fib potentially disappearing afterwards - or to the lock to underflow when the fib is deleted again. In order to keep the existing API semantics, we use the locks with API and CLI source as flags. This means we need to use a different counter for the interface-related locks. This also prevents an issue where an interface being bound to a vrf via API and released via CLI could mess up the lock counter. Finally, this will help with cleaning up the interface-related locks on interface deletion in a later patch. Type: fix Change-Id: I93030a7660646d6dd179ddf27fe4e708aa11b90e Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com> Signed-off-by: Aloys Augustin <aloaugus@cisco.com>
2021-09-27fib: fix crash on exporter tracker removeVladislav Grishenko1-1/+39
Exported entries are tracked only when the prefix found in the export FIB is really attached, exporter tracker is not set if the export entry is not valid for export, ex. for special FIB entries - default route, zeronet, mcast and broadcast prefixes. When imported entries need to be purged, such unset exporter tracker is being removed by non-initialized index with absent delegate entries, causing corresponding assert and crash. Type: fix Signed-off-by: Vladislav Grishenko <themiron@yandex-team.ru> Change-Id: Ib24a2e7853a03a960577872480213e1e8097da5a
2021-09-13interface: fix init fib_index_by_sw_if_indexNathan Skrzypczak1-12/+0
Type: fix The init of fib_index_by_sw_if_index wasn't setting default value to 0. Which we now need for setting interfaces unnumbered Change-Id: Ie5be9b5e5373ef055557a871ad4d1c45fbfc1dee Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
2021-06-21fib: Add unit test for RR source using covers labelsNeale Ranns1-1/+69
Type: test UT for patch: 4fc68ee Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: I96fac9a6407a7f3ebeecc5e68a7683e541063de7
2021-02-15ip: Path MTUNeale Ranns1-4/+26
Type: feature Support setting the MTU for a peer on an interface. The minimum value of the path and interface MTU is used at forwarding time. the path MTU is specified for a given peer, by address and table-ID. In the forwarding plane the MTU is enfored either: 1 - if the peer is attached, then the MTU is set on the peer's adjacency 2 - if the peer is not attached, it is remote, then a DPO is added to the peer's FIB entry to perform the necessary fragmentation. Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: I8b9ea6a07868b50e97e2561f18d9335407dea7ae
2021-02-01fib: Changes to interpose sourceNeale Ranns1-3/+149
Type: improvement 1) stack the interpose on any path-extensions (e.g. labels) from the next best source 2) allow more than 1 source to contribute a DPO for a given prefix Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: Idc2fbb36cfbd2387081765d8af0f1fbe61612160
2020-12-08fib: Source Address SelectionNeale Ranns1-6/+8
Type: feature Use the FIB to provide SAS (in so far as it is today) - Use the glean adjacency as the record of the connected prefixes = there's a glean per-{interface, protocol, connected-prefix} - Keep the glean up to date with whatever the recieve host prefix is (since it can change) Signed-off-by: Neale Ranns <neale.ranns@cisco.com> Change-Id: I0f3dd1edb1f3fc965af1c7c586709028eb9cdeac
2020-08-06misc: harmonize namesDave Barach1-4/+4
Type: fix Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: Ibad744788e200ce012ad88ff59c2c34920742454
2020-03-17fib: Always install all routers mcast addressesNeale Ranns1-4/+4
Type: improvement Signed-off-by: Neale Ranns <nranns@cisco.com> Change-Id: Ia8dff15855a81cf29729bdaa3ff28fbe3254fa97
2019-12-04fib: Decouple source from priority and behaviourNeale Ranns1-2/+5
Type: feature the fib_source_t enum alone no longer defines the priority and behaviour, instead each source must be allocated these attributes. This allows the creation of other sources by the plugins (and soon over the API). Signed-off-by: Neale Ranns <nranns@cisco.com> Change-Id: I890ee820fbc16079ee417ea1fbc163192806e853
2019-08-29ip: remove unused function parameterSimon Zhang1-4/+1
Type: refactor Signed-off-by: Simon Zhang <yuwei1.zhang@intel.com> Change-Id: I8674ff5f6f6336b256b7df8187afbb36ddef71fb
2019-04-08fixing typosJim Thompson1-6/+6
Change-Id: I215e1e0208a073db80ec6f87695d734cf40fabe3 Signed-off-by: Jim Thompson <jim@netgate.com>
2019-02-19VPP-1568:when entry src cover change, recursive-loop fib still can not work.mu.duojiao1-0/+75
Change-Id: I90762b59f94175f278380c95776471a30bc94d34 Signed-off-by: mu.duojiao <mu.duojiao@zte.com.cn>
2018-12-03move [m]fib and BIER tests to unittest pluginNeale Ranns1-0/+10551
Change-Id: I9d2f52e756363df011026773bfffa838a557313f Signed-off-by: Neale Ranns <nranns@cisco.com>