Age | Commit message (Collapse) | Author | Files | Lines |
|
_pool_init_fixed uses mmap to initialize a fixed-size and preallocated
pool, whose size is the sum of vector_size and free_index_size with
alignment to the CLIB_CACHE_LINE_BYTES and page size. In this way
vector_size equals to pool_header_t + vec_header_t + elt_size * max_elts
so moving to the end of the pool space should be pool_header_t pointer +
vector_size, instead of vec_header_t pointer + vector_size.
Simple code to reproduce this error:
u64 *pool;
pool_init_fixed(pool, 2042);
Improve unit test to cover this case
Type: fix
Signed-off-by: Jieqiang Wang <jieqiang.wang@arm.com>
Reviewed-by: Lijian Zhang <lijian.zhang@arm.com>
Reviewed-by: Tianyu Li <tianyu.li@arm.com>
Change-Id: If088ef89b3dcb2d874ee837ae9da60983b14615c
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Type: improvement
Change-Id: Ib7e2f5f314144064de7b6be0fade3db2f9c943fe
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
Type: improvement
Linux uses pseudo header checksum when checksum of l4 is offloaded.
This patch adds similar support in virtual interfaces.
Change-Id: I6a94d1104e59356f95057e7c122e3be9cd8659a3
Signed-off-by: Aloys Augustin <aloaugus@cisco.com>
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Exported entries are tracked only when the prefix found in the export
FIB is really attached, exporter tracker is not set if the export
entry is not valid for export, ex. for special FIB entries - default
route, zeronet, mcast and broadcast prefixes.
When imported entries need to be purged, such unset exporter tracker is
being removed by non-initialized index with absent delegate entries,
causing corresponding assert and crash.
Type: fix
Signed-off-by: Vladislav Grishenko <themiron@yandex-team.ru>
Change-Id: Ib24a2e7853a03a960577872480213e1e8097da5a
|
|
Type: refactor
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I4525bc669d1c42c41dbc398cf239a093b6853298
|
|
Type: feature
Change-Id: If0edbb21a0283d66c648a9e190d238c8cfa56353
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
Type: feature
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
Change-Id: I3652ae275385d9b1eb1b11f418e3a7e5fef2f556
|
|
Type: make
Change-Id: I2958e9eddadee6434766ecd3cdb3b9cea742ed64
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: fix
The init of fib_index_by_sw_if_index wasn't
setting default value to 0. Which we now
need for setting interfaces unnumbered
Change-Id: Ie5be9b5e5373ef055557a871ad4d1c45fbfc1dee
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
vlib_buffer_chain_linearize() truncates partial data in chained buffers
in corner cases when current_data is negative.
Strengthen test cases to reproduce the errors and fix it.
Type: fix
Change-Id: Ida621923711c5755508224bdc3842b31003c6c0b
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: refactor
Change-Id: Id10cbf52e8f2dd809080a228d8fa282308be84ac
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: test
UT for patch: 4fc68ee
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I96fac9a6407a7f3ebeecc5e68a7683e541063de7
|
|
Test added to the unittest plugin / test_vlib.py
Type: improvement
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I73445e57918347c102ff6f5e8c9ddb9bd96f1407
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ife79871c6530d2cd485928fee465baf2c8957e11
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I7f9c4b9b6e523ab549087ad21724f34f08fca793
|
|
By convention, connects segment manager will be first. Therefore it will
be the one with the first segment wherein lies the app's message queue.
Saves us the trouble of allocating it on first connect, if app started
by listening, and we no longer need to track if it's assignable to a
listener or if it can be removed.
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Iba9a8ffaab618eeb41ec2144dcfee62d006dc7a2
|
|
Type: feature
Change-Id: I36041fe5c5f0ff129aee42516189807e96f62123
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Under some timing conditions,VCL may receive CONNECTED/ACCEPTED
event before ADD_SEGMENT event.
Timing example:
2 threads call segment_manager_alloc_session_fifos() parallelly
Thread 1 Thread 2
sm read lock |
| |
try to alloc fifo =>failed |
| |
sm read unlock |
| |
sm write lock |
| |
add segment |
| |
sm write unlock |
| sm read lock
| |
| try to alloc fifo=>successful
sm read lock |
| sm read unlock
| |
| emit CONNECTED/ACCEPTED
emit ADD_SEGMENT event
|
sm read unlock
This commit move ADD_SEGMENT notification under the protection
of the write lock in some scenarios.
Type: fix
Signed-off-by: liuyacan <liuyacan@corp.netease.com>
Change-Id: I25d5475c5e6d37cfccefa9506f6030c26ce8ee9b
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I998c0686f9f7dc556dda8b28e23bbed127d0aafc
|
|
Type: improvement
Change-Id: I73383eb15186021cd6527d112da8443a0082f129
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I20e48a5ac8068eccb8d998346d35227c4802bb68
Signed-off-by: Mohammed Hawari <mohammed@hawari.fr>
Type: feature
|
|
Type: refactor
this allows the ipsec_sa_get funtion to be moved from ipsec.h to
ipsec_sa.h where it belongs.
Also use ipsec_sa_get throughout the code base.
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I2dce726c4f7052b5507dd8dcfead0ed5604357df
|
|
Keep coverity happy by checking the return value of unformat calls.
Type: test
Signed-off-by: Brian Russell <brian@graphiant.com>
Change-Id: Iccd0296da527d079f79cc7bd8b57af1b524299bd
|
|
Type: feature
Support setting the MTU for a peer on an interface. The minimum value of
the path and interface MTU is used at forwarding time.
the path MTU is specified for a given peer, by address and table-ID.
In the forwarding plane the MTU is enfored either:
1 - if the peer is attached, then the MTU is set on the peer's
adjacency
2 - if the peer is not attached, it is remote, then a DPO is added to
the peer's FIB entry to perform the necessary fragmentation.
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I8b9ea6a07868b50e97e2561f18d9335407dea7ae
|
|
Ensure policer struct is cache aligned and fits in one cache line.
Give it a simpler name to reflect its job as the representation of
a policer.
Type: improvement
Signed-off-by: Brian Russell <brian@graphiant.com>
Change-Id: If1ae4931c818b86eee20306e503f4e5d6b84bd0d
|
|
Add a helper CLI to exercise a policer pre-configured by the test
harness. The test harness will check the stats afterwards.
Type: test
Signed-off-by: Brian Russell <brian@graphiant.com>
Change-Id: I913dda4a9f8179c1c6b3061a68164bf1e698a392
|
|
Avoid synchronizing producers and the consumer. Instead, only use mutex
or spinlock (if eventfds are configured) to synchronize producers.
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ie2aafbdc2e07fced5d5e46ee2df6b30a186faa2f
|
|
When the counter vectors are validated and they are already long enough
to fit the given index in memory, there is no need to increase the stats
segment epoch. In this case, the counter vectors do not change as a
result of the validation.
This optimization is necessary for the case when the configuration is
changed at multiple thousands per second rate. The counter vectors grow
at the beginning and their size stabilizes after a while. Without this
improvement, it can still take several seconds for a stats reader to
succeed.
Type: improvement
Signed-off-by: Miklos Tirpak <miklos.tirpak@gmail.com>
Change-Id: I5a6c30255832716a1460018d0bd0f63031de102b
|
|
Type: improvement
1) stack the interpose on any path-extensions (e.g. labels) from the
next best source
2) allow more than 1 source to contribute a DPO for a given prefix
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: Idc2fbb36cfbd2387081765d8af0f1fbe61612160
|
|
Add separate queue implementation for the message queue as it's custom
tailored for fifo segments as opposed to binary api.
Also move eventfds to the private data structures.
Type: refactor
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I6df0c824ecd94c7904516373f92a9fffc6b04736
|
|
With this there are no more pointers in data structures allocated on
fifo segments.
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ibe584b7b6809fa360a105974655a91674db69ab6
|
|
Type: feature
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ic373cd2c11272da539eb4b0db27227f36f2f9688
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I113a630d6db4741f54e508f7e0ed77be139df0e4
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Id8e77e8b2623be719fd43a95e181eaa5b7df2b6e
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Icd44ede9604c29839af250a2be93ecf467467aa0
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Idcc8d862b98dba4a67f829c1778377f35ad47b00
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I518e096fe13847759806ff62009e73fd8f7451b7
|
|
Type: refactor
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
Change-Id: Idf17c3c02fb77fcadf69a9164abd4da35289aaed
|
|
Type: feature
Use the FIB to provide SAS (in so far as it is today)
- Use the glean adjacency as the record of the connected prefixes
= there's a glean per-{interface, protocol, connected-prefix}
- Keep the glean up to date with whatever the recieve host prefix is
(since it can change)
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
Change-Id: I0f3dd1edb1f3fc965af1c7c586709028eb9cdeac
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I21bda0c46406aff54ad8fe5e44491e8e332de170
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I58fb0e05f62eae45818c23e8e148ff6758ba463a
|
|
Type: fix
Signed-off-by: Ryujiro Shibuya <ryujiro.shibuya@owmobility.com>
Change-Id: If7e22978a6b65f5b68ccb2bd97b5e0fba167b3bf
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I03f923053499f219035c9b7b6640fc575568d474
|
|
- fix fifo initialization overflowing chunk size
- stick to the default base virtual address to initialize fifo. ASAN
can be picky about address space
Type: fix
Change-Id: If9a29138d2c207859d72845e928290c808c4a982
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: refactor
Change-Id: I54df533a8f863c4e49742903cf2457f18b4fc506
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: fix
Signed-off-by: Ryujiro Shibuya <ryujiro.shibuya@owmobility.com>
Change-Id: If5a8313262da828616db8b1d9ef831d42b11d952
|
|
Type: fix
- Document that ooo dequeues with ooo lookups cannot be done in
combination with in order dequeues.
- Added assert to capture this scenario and de-initialized rbtrees for
cut-through tx fifo
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ic40d020b3f0391fcf022ea3c906b86121744144f
|
|
Type: feature
Signed-off-by: Artem Glazychev <artem.glazychev@xored.com>
Change-Id: Iec28fb11b6edff1bee23117f56aa3a3e5729541a
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: feature
Change-Id: I041bff2e8d589c171661de286fa1503531dff891
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Type: fix
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: Ibad744788e200ce012ad88ff59c2c34920742454
|