aboutsummaryrefslogtreecommitdiffstats
path: root/src/plugins/vmxnet3/README.md
AgeCommit message (Collapse)AuthorFilesLines
2019-02-26vmxnet3: RSS supportSteven Luong1-1/+0
Configurable up to 16 RX queues per interface. Default is 1. Change-Id: If9e2beffeb7e7dc8c2264b4db902132b2fea02c1 Signed-off-by: Steven Luong <sluong@cisco.com>
2019-02-26vmxnet3: lro/tso and rx checksumSteven Luong1-1/+0
Add lro/tso and rx checksum support. lro/tso is configured via startup.conf vmxnet3 { lro } It is disable by default due to not all versions of ESXi supports it. Change-Id: Icf224ff528884ecd9e655b4fcf4481194e8c5a63 Signed-off-by: Steven Luong <sluong@cisco.com>
2019-02-02vmxnet3: multiple TX queues supportSteven Luong1-1/+1
Add num-tx-queues to the vmxnet3 create CLI/API. Default is 1. Max is min (8, the number of cores assigned to VPP). Change-Id: I7e0a659a82d01c719665c228dd8a71e3288a2895 Signed-off-by: Steven Luong <sluong@cisco.com>
2019-01-15vmxnet3: add numa support and link speedSteven1-1/+0
Allocate physmem on the same numa set link speed cap vmxnet3 support version to 3 if the device supports higher version Change-Id: Id47dd83b0da53e623fd6cf3ad010e58158b1ab15 Signed-off-by: Steven <sluong@cisco.com>
2018-10-16vmxnet3: show vmxnet3 with filtering capability [VPP-1452]Steven1-1/+2
show vmxnet3 desc may display 5000 lines of output since it has 5 tables. Each table may have 1000 entries. It would not be very useful to debug problem. We need filtering capability for the subject show command. We need to be able to display the descriptor table per interface, per interface per table, and per interface per table per slot. The latter is the most useful. tested the following valid combinations show vmxnet3 show vmxnet3 desc show vmxnet3 vmxnet3-0/13/0/0 show vmxnet3 vmxnet3-0/13/0/0 desc show vmxnet3 vmxnet3-0/13/0/0 rx-comp show vmxnet3 vmxnet3-0/13/0/0 rx-comp 1 show vmxnet3 vmxnet3-0/13/0/0 tx-comp show vmxnet3 vmxnet3-0/13/0/0 tx-comp 1 show vmxnet3 vmxnet3-0/13/0/0 rx-desc-0 show vmxnet3 vmxnet3-0/13/0/0 rx-desc-0 1 show vmxnet3 vmxnet3-0/13/0/0 rx-desc-1 show vmxnet3 vmxnet3-0/13/0/0 rx-desc-1 1 show vmxnet3 vmxnet3-0/13/0/0 tx-desc show vmxnet3 vmxnet3-0/13/0/0 tx-desc 1 negative tests and command is rejected show vmxnet3 abc show vmxnet3 desc abc show vmxnet3 vmxnet3-0/13/0/0 abc show vmxnet3 vmxnet3-0/13/0/0 desc abc show vmxnet3 vmxnet3-0/13/0/0 rx-comp abc show vmxnet3 vmxnet3-0/13/0/0 rx-comp 1 abc Change-Id: I0ff233413496e58236f8fb4a94e493494c20c5cb Signed-off-by: Steven <sluong@cisco.com>
2018-09-21vmxnet3: Add hardware link status handlingSteven1-1/+1
Added an interrupt line for monitoring and notifying hardware link status Displayed additional information for show hardware for vmxnet3 interface Fixed possible garbage display on interface name for show vmxnet3 Change-Id: If457bfe7c216287fb3a4e2630f00434d595f387b Signed-off-by: Steven <sluong@cisco.com>
2018-09-14vmxnet3 device driverSteven Luong1-0/+59
Implemented vmxnet3 deivice driver for VMWare ESXi. Tested with Ubuntu 18.04 connected to ESXi 6.0 Ubuntu-18.04 (VPP) --- ESXi-6.0 Change-Id: I85fbc86f2d8532b017bc4271612d17e24e498e4d Signed-off-by: Steven Luong <sluong@cisco.com>