Age | Commit message (Collapse) | Author | Files | Lines |
|
Change-Id: Iaae69a1219ccaedbfee5c3075c41c7b31c6e2b70
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I498ed1162eadf3eff2543f1ec02a9b1e5fdc05d8
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I1e57a86b8872798a888e7d6128d9c4537a8090e6
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I4ae65494b8f9bc51521add5e66a51b594aad6716
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I881551e6c13503a71ae29a7a58bde4d193745d55
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Original code was not thread safe.
Change-Id: I3d473b976d2b9ff62f42955c5c2a7fd6b4990cc2
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Some punt scenarios (notably, involving DNS traffic)
do not have the current_data set to the L3 header -
as a result, chaos ensues. To tackle this, approach
the parsing from the other side, and look at
the hopefully remaining ethernet header
to see whether the packet is IPv4 or IPv6.
Verified the STN'ed TCP traffic continues to work,
and that the STN'ed DNS traffic starts to work as well.
Change-Id: I0aa2ad1df2fb23dd4e54a564714103b19114d636
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
Change-Id: I0a6d1257e391c3b6f7da6498bd5f7d4c545d17e9
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Also remove DPDK 17.05 support.
Change-Id: I4f96cb3f002cd90b12d800d6904f2364d7c4e270
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: Icd73f00162fb6aabe296c8bb6f2174ad4f6a17b7
Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>
|
|
egress path
L3 egress path does not set the ethernet flags reflecting the count of VLANs,
but rather has the offset explicitly, so use that.
Change-Id: Id3f6562dcd52ca24137c305f1a1c88c1f125da78
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
The original version printed just a few u64s, which is useful for
directly working on the code, but not when figuring out what is
possibly a config or environment-related issue. So, add printing
the 5-tuple struct in a way that is usable by an operator.
Change-Id: I84cc3a239cdaff05ed31c3458cea198e38b58e03
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
Change-Id: I02b2b69db1e2afe62e3d3413034feb3bdcb3123e
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: Ic4f797cea6fa21fb29d646256210357cf5267b38
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
|
|
Set the content of tmp.sock prior to calling memif_msg_send_disconnect.
Also fix the problem socket was not close in the same spot due to
error encountered.
Change-Id: I8f54ebad2250d1944afcc52e71d2a59da05362af
Signed-off-by: Steven <sluong@cisco.com>
|
|
Change-Id: I74ff693315a3ffc7aa2640f25d906ca0d6da6bc5
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: If581feca0d51d0420c971801aecdf9250c671b36
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I11d1f9507d429ad8b25e9873272ede231623e622
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Change-Id: I2397ada9760d546423e031ad45535ef8801b05e7
Signed-off-by: Jon Loeliger <jdl@netgate.com>
|
|
Added two new errors:
ACL_IN_USE_INBOUND
ACL_IN_USE_OUTBOUND
Update ACL tests to expect new, precise return values.
Change-Id: I644861a18aa5b70cce5f451dd6655641160c7697
Signed-off-by: Jon Loeliger <jdl@netgate.com>
|
|
This reverts commit 45a588fa3efaaf52360986360ab1f6827bae3164.
Change-Id: I7e541545791f7743ee827bdec8b6fc46cbb0938f
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: Id085c1e3cbc7bf03df02755f9e35896cdb57e9e3
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
This reverts commit 590acf8fa7af6a8604edd72a32f9f087be52c767.
new version includes minor fix for the crash when the interface is
deleted.
Change-Id: I8fc56eb9145e4d8e1d410206f84e705045898608
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
For the MAP-E CE limit port choice based on PSID
CLI: nat44 addr-port-assignment-alg map-e psid <n> psid-offset <n> psid-len <n>
Change-Id: Iecceee61fca372cb5790c16993a82fbdc9930f0f
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
Change-Id: Ie849ab713ff086187c18a91ab32e58207fe94033
Signed-off-by: Damjan Marion <damarion@cisco.com>
Signed-off-by: Jakub Grajciar <Jakub.Grajciar@pantheon.tech>
|
|
Change-Id: I92b351895c7efb26533c05512b91ead8ddbfb9c8
Signed-off-by: Pavel Kotucek <pkotucek@cisco.com>
|
|
Change-Id: I326429c31dea6958a342ee152ef86cb975f4b12c
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
Translation of fragmented packets.
Change-Id: I9b1f2e9433ce273638080f32c2d3bff39c49899d
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
Dual-Stack Lite enables a broadband service provider to share IPv4 addresses among customers by combining two well-known technologies: IPv4-in-IPv6 and NAT.
Change-Id: I039740f8548c623cd1ac89b8ecda1a6cc4aafb9c
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
Change-Id: If2048c7d72048679bc5d0412f3fae109926f759e
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Change-Id: Id01a363bf2b574376651de7bc8f3f7b2bb58c615
Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>
|
|
warning found by clang:
warning: logical not is only applied to the left hand side of
this bitwise operator [-Wlogical-not-parentheses]
Change-Id: I964651a4444b11da145edc329da83675cd830f78
Signed-off-by: Gabriel Ganne <gabriel.ganne@enea.com>
|
|
Change-Id: I2feb3e07c3070e8a525c539dd2feffa0dd1bca21
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
|
|
VPP-1034
Change-Id: I02b4db9e52446ab8578df1f011dd27f39de64c70
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
|
|
Add new cli api: "test lb flowtable flush" which flushes everything.
Call this new cli function after the end of each lb unit test.
Change-Id: I71d04a7bfba398f7d4dd9cc3ed24bba786943663
Signed-off-by: Gabriel Ganne <gabriel.ganne@enea.com>
|
|
Change-Id: I7fe34e99f566dd2e0a36a9ba38f894973989ca8a
Signed-off-by: Jon Loeliger <jdl@netgate.com>
|
|
MACIP ACLs
The classifier tables upper bound of memory was just big enough
to cause the unittests pass most of the time but not always.
Increase the amount of space and run several hundred iterations
of unittests to ensure they always pass.
Change-Id: Ieb7876c6ebdde1f8c5273dbb9b090f12f2c38915
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
Administratively delete NAT44 session for specific inside/outside addresses and port pair.
Change-Id: If5ab500ac3592c7153d6d8f2cc0297df7309fbc3
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
format()
The vppctl was getting upset with large chunks of info generated
by repeated format() functions, so convert to use vlib_cli_output instead.
Also, refactor the show functionality into smaller functions,
separate from the input handling.
Change-Id: I5d0db5ac45ce4c1b59cd41526b837412e06b1ce0
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
Change-Id: Icaf7d7ad47284aea7a56e8006b69f45874d64202
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Use a single physical interface in order to accomplish NAT44/NAT64.
Change-Id: I0c8138953a7a4075df306172e125abad771315e4
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
- Global variables declared in header files without
the use of the 'extern' keword will result in multiple
instances of the variable to be created by the compiler
-- one for each different source file in which the
the header file is included. This results in wasted
memory allocated in the BSS segments as well as
potentially introducing bugs in the application.
Change-Id: I6ef1790b60a0bd9dd3994f8510723decf258b0cc
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
|
|
This plugin provides per-ip address to interface punting.
When at least one rule is defined, the plugin receives all packets
which destination is one of VPP's address but which was not processed
by VPP (e.g., a TCP packet on a port that is not open, or a packet
for a protocol which is not attached).
Based on the set of configured rules, the destination address of each
packet is used to send the packet on the associated interface.
This plugin allows multiple containers to use
VPP's TCP stack (or other features provided by VPP) while still
being able to receive additional packets.
Change-Id: I3e69bb7d98183bf5163cb9ecb564cb482de252ce
Signed-off-by: Pierre Pfister <ppfister@cisco.com>
|
|
Ubuntu 17.04, gcc version 6.3.0 20170406 (Ubuntu 6.3.0-12ubuntu2),
"make build" fails with the few of the errors below:
error: suggest parentheses around comparison in operand of ‘|’
[-Werror=parentheses]
is_aead = (sa0->crypto_alg == IPSEC_CRYPTO_ALG_AES_GCM_128 |
Solution: use the logical rather than the bitwise or.
Change-Id: Iffcc1ed2e68b14b248159cb117593d32c623c553
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
* (vip - lbm->vips) is u64; change format from [%u] to [%lu]
* vip->plen is u8, but format looks for u32; add exlicit cast
(this cast was done implicitely)
On ARM platforms, these prevent a loop in the second call to
format_white_space() which would get an invalid (huge) indent value;
the result *looked like* an infinite loop.
Change-Id: I675ef2f98e4ba3d9e8aef12022d38b1d22981da8
Signed-off-by: Gabriel Ganne <gabriel.ganne@enea.com>
|
|
Change-Id: I2446c646de7f227f9438dd7ef93a455ba5af0102
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
This follows commit d3c008d108aa2187d1a2afe2833b4de25ca2c2ab by
Christophe Fontaine.
Change-Id: I0c4df40df44be2ac0ab25817fa050a1f619eca4d
Signed-off-by: Gabriel Ganne <gabriel.ganne@enea.com>
|
|
Made Update to src/plugins/dpdk/buffer.c
Change-Id: I87bb8f38974a7be274c1b1d205f5513e7d068e48
Signed-off-by: Georgina <georgina.sheehan@intel.com>
|
|
INADDR6_ANY should be displayed as "::" instead of "0.0.0.0"(ipv4 format).
Change-Id: I24ec7b6febbfeca5db7ff894f455ecb73d954334
Signed-off-by: Steve Shin <jonshin@cisco.com>
|
|
interface
From the troubleshooting perspective, it is nice to immediately know
the ACEs for the ACLs applied to an interface, so implement that.
To make the CLI more friendly, split each of the "show" variants
into an independent _cmd function with the distinct CLI path.
Change-Id: I519e4799083c04e8f0fcdf3e262a73493be4b690
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|