Age | Commit message (Collapse) | Author | Files | Lines |
|
32-bit code still can use crc32c instructions, but it operates
on 32 registers
Change-Id: I9bb6b0b59635d6ea6a753584676ebcf59c8f6584
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
- Adds VirtualFucntionEthernet for VFs
- Enables MLX4 driver
Change-Id: I163300e68edbe033227f641bdfcfe5918cbe58cf
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Move API source code from snat.c to snat_api.c
Change-Id: I1c4439eb5d2e3f43695ecc4d300eccd148105c15
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
Change-Id: I0fec86914ec027383ff511b7092beac2363f55f7
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I9664214652229b663c3e3ba7406b4ede96bfb123
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I1decca6fb5ce6de74ccbcd5a262ebd3db6f55cdc
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Fix a logic error related to timing out of the connections
following the active one. To avoid this class of issue in
the future, create corresponding testcases, as well as some
trivial sanity testcases for both IPv4 and IPv6.
Since these tests are timing-dependent and take up time,
mark them as extended tests.
Change-Id: I2c72bad5efda7db8aa9cb05801fe47928dc47927
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
Change-Id: I961685a2a0e4c314049444c64eb6ccf877c278dd
Signed-off-by: Pablo Camarillo <pcamaril@cisco.com>
|
|
Change-Id: Ib506c3e9d66170f29e3266ad6dc4d32b829befba
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I16dcc0de2553c6c1eb87dd1ec4c8d3c649e6f285
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
This patch slightly modifes how to enable DPDK Cryptodev.
The startup option 'enable-cryptodev' has been removed and unless not enough
cryptodevs are found, DPDK cryptodev will be enabled by default.
Change-Id: Ic0ac507802cdc0eeb51f065e04ec43a1885617cf
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
|
|
Change-Id: Id632ff1b30be808d9f270e2f77260391569fbda2
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I19a6015fde7342588cfa9c7a4f07016aa339cc72
Signed-off-by: Martin Gálik <magalik@cisco.com>
|
|
Change-Id: Ic95fe6179de1151796188813cc595187d4c842a0
Signed-off-by: Shwetha Bhandari <shwethab@cisco.com>
|
|
Change-Id: Ib542b2b3ee023fbe3d0e01ceaf4b4ab7a0ec80dc
Signed-off-by: Martin Gálik <magalik@cisco.com>
|
|
Change-Id: I9c8636bd2c4b8da2907e8e4a4f2be1a2c3a8e0bb
Signed-off-by: Martin Gálik <magalik@cisco.com>
|
|
Change-Id: I72298aaae7d172082ece3a8edea4217c11b28d79
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Multicast enable flag should be set when the bonded interface is up.
This flag allows multicast packets to be processed from the slave devices
of the bonded interface. Also promiscuous mode for all-multicast should
be correctly displayed as part of 'show hardware detail' output.
Change-Id: Ief0157c4c030a28afb9c45ebf3d6a12710083724
Signed-off-by: Steve Shin <jonshin@cisco.com>
|
|
maximum entries per user exceeded event
Change-Id: Ie35d7f40f55001e2ef4a38f934f176594f25b189
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
Change-Id: I220b0b95449f24cc547206e38ab8e10019115ec0
Signed-off-by: Milan Lenco <milan.lenco@pantheon.tech>
|
|
Change-Id: I3d64d5ced38a68f3fa208be00c49d20c4e6d4d0e
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
Change-Id: Iec8fd4c2bd26874bd8bda82172af797e9b92592c
Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
|
|
Change-Id: Ide4f9bd6158fb64d069540fb43f4e593e39d6ff3
Signed-off-by: Pavel Kotucek <pkotucek@cisco.com>
|
|
tests). The DPO was incorrectly initialised with FIB_PROTO_MAX
Change-Id: I962df9e162e4dfb6837a5ce79ea795d5ff2d7315
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Handle situation when client tries to connect to multiple hosts/ports
from the same client port. Extend matching to include remote host/port
when searching for existing session and create session for each flow
even when originating from the same client port.
Change-Id: I4f54ded930e59e7196843c6bc1d2d2386c57cd3c
Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
|
|
Change-Id: Ie2ab844ad27b5ddb552bad9b19e7029cf91e4071
Signed-off-by: Pavel Kotucek <pkotucek@cisco.com>
|
|
add API and CLI configuration of deterministic NAT session timeout for TCP, UDP
and ICMP protocol
Change-Id: I577440452e7eaedcb5d80501a7fd4b76e31e8c9c
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
Change-Id: I0306bc0ab87908adb79c594c657d579cb34b3ec1
Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
|
|
Change-Id: I9a6bcb7d173a2c13d89784e7ff8a6e42dcee201f
Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
|
|
Change-Id: Ic16bc10d0b2877b2afdf052615f9334f31b9519f
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
This pathch deprecates "show dpdk placement" and
"set dpdk placement" CLI commands.
Change-Id: I4e052ec3e8b8e6c54b4816e1e689e5b7a24892db
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I71f34dc64d4ddc5f2ec1164cb3c353d0fe2d95ab
Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
|
|
Change-Id: Icd25ec2e5faf69898178199aa44f21790ce664e1
Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
|
|
Change-Id: I691d1bfb2923a07c0003485b1d0272aaf9ed27ee
Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
|
|
Set rxmode.enable_scatter field in DPDK port config parameter so ENIC
driver will use multiple mbuf's for receiving jumbo packets.
Also remove ENIC driver check to disable setting ENIC MTU as this
capability is now working with the new ENIC driver, subject to 9002B
limit.
Change-Id: I563976201c4968d4538c0759505cef2de876934a
Signed-off-by: John Lo <loj@cisco.com>
|
|
1 - interface-DPO
Used in the Data-plane to change a packet's input interface
2 - MPLS multicast FIB entry
Same as a unicast entry but it links to a replicate not a load-balance DPO
3 - Multicast MPLS tunnel
Update MPLS tunnels to use a FIB path-list to describe the endpoint[s]. Use the path-list to generate the forwarding chain (DPOs) to link to .
4 - Resolve a path via a local label (of an mLDP LSP)
For IP multicast entries to use an LSP in the replication list, we need to decribe the 'resolve-via-label' where the label is that of a multicast LSP.
5 - MPLS disposition path sets RPF-ID
For a interface-less LSP (i.e. mLDP not RSVP-TE) at the tail of the LSP we still need to perform an RPF check. An MPLS disposition DPO performs the MPLS pop validation checks and sets the RPF-ID in the packet.
6 - RPF check with per-entry RPF-ID
An RPF-ID is used instead of a real interface SW if index in the case the IP traffic arrives from an LSP that does not have an associated interface.
Change-Id: Ib92e177be919147bafeb599729abf3d1abc2f4b3
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
(VPP-682)
This fixes the previously-implicit "drop all non-first fragments" behavior
to be more in line with security rules: a non-first fragment is treated
for the purposes of matching the ACL as a packet with the port
match succeeding. This allows to change the behavior to permit
the fragmented packets for the default "permit specific rules"
ruleset, but also gives the flexibility to block the non-initial
fragments by inserting into the begining a bogus rule
which would deny the L4 traffic.
Also, add a knob which allows to potentially turn this behavior off
in case of a dire need (and revert to dropping all non-initial fragments),
via a debug CLI.
Change-Id: I546b372b65ff2157d9c68b1d32f9e644f1dd71b4
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
(cherry picked from commit 9fc0c26c6b28fd6c8b8142ea52f52eafa7e8c7ac)
|
|
This patch deprecates stack-based thread identification,
Also removes requirement that thread stacks are adjacent.
Finally, possibly annoying for some folks, it renames
all occurences of cpu_index and cpu_number with thread
index. Using word "cpu" is misleading here as thread can
be migrated ti different CPU, and also it is not related
to linux cpu index.
Change-Id: I68cdaf661e701d2336fc953dcb9978d10a70f7c1
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: Id15b401223aabe7dacb7566c871ebefc17fbb1fc
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
(cherry picked from commit 7fd3f513c7df198c45204eba0a3e9a3abe509593)
|
|
Change-Id: I935620798d6fe82b99b6bd564749e20a189b4ae3
Signed-off-by: Milan Lenco <milan.lenco@pantheon.tech>
|
|
Change-Id: I844ec53b55ceaa1e00996f5cf8a018537ea8b481
Signed-off-by: Milan Lenco <milan.lenco@pantheon.tech>
|
|
Change-Id: I3ed2834a326eac50a7cb4faa592f42fd06325d5a
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
- use the counters in a private struct rather than node error counters
- ensure the timer for the non-idle connections is restarted
- fix the deletion of conn at the current tail the list
Change-Id: I632f63574d2ced95fb75c5e7fb588c78fb3cce1c
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
(cherry picked from commit 097051a3bd1f63a177c0728f15375afd84a68918)
|
|
Change-Id: I86089e9bb604adfc260a111685001be1c897ce53
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I8edb927289c080929380bfbf2b760749b7984d4b
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
- Fixed three coverity issues
- Linked SRv6 docs
- Moved sample plugin to examples folder
- Fixed bug with hash. Now everything is using mhash. Potentially in the future we want to do bihash.
Change-Id: Ie03a13c8fecb1e315e67d0596cbd23220779aaf2
Signed-off-by: Pablo Camarillo <pcamaril@cisco.com>
|
|
Change-Id: I94c06b07a39f07ceba87bf3e7fcfc70e43231e8a
Signed-off-by: Damjan Marion <damarion@cisco.com>
Co-Authored-By: Milan Lenco <Milan.Lenco@pantheon.tech>
|
|
Change-Id: I9f7f9f840c3c1aad5e8c9a4fa1ba7a58a85cfd9e
Signed-off-by: John Lo <loj@cisco.com>
|
|
Change-Id: I88b322a5d602f3d6d3310e971479180a89430e0e
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I3e3bf786ab3c7672ff2cc7acd221421072e3ac8b
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
|