aboutsummaryrefslogtreecommitdiffstats
path: root/src/plugins
AgeCommit message (Collapse)AuthorFilesLines
2018-10-21tcp: count first lost hole (VPP-1465)Florin Coras1-3/+29
Change-Id: I3ac136e2a10796d8fa86ddb6f0d6cabe5fa749f8 Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-10-20dpdk: add netvsc PMDStephen Hemminger3-1/+40
Teach DPDK plugin about the netvsc Poll Mode Driver. The speed of the Netvsc device matches the speed of the external port on the underlying vswitch. Therefore 1G, 10G, 25G, 56G and even 100G are possible. Change-Id: I14ab6907b7d8d350b63a083409d45fb9c348a364 Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
2018-10-20acl-plugin: use the L2 feature arc infrastructure instead of L2 classifier ↵Andrew Yourtchenko3-699/+304
for plumbing This makes ACL plugin use the new feature arcs, which slightly increases performance. Since for ethertype whitelisting we were using the L2 classifier, to retain the functionality, make a simple node doing that, and plug it into non-ip L2 feature arc whenever needed. Change-Id: I3add377a6c790117dd3fd056e5615cb4c4438cf4 Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2018-10-20dpdk: use rx/tx_offload_names to formatStephen Hemminger1-38/+53
Rather than keeping our own list of offload capabalities, use the function in 18.08 or later to decode the value. Also, introduce a formatter to convert to lower case because DPDK API returns upper case names. Change-Id: I87546fa2bec67f8a8b44288f5994514114cb6faf Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
2018-10-19avf: fix crash in rss key calculationDamjan Marion1-1/+1
Change-Id: Id13a0b6ed54885babf679f05207170e36709d9fa Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-10-19NAT44: fix ICMP virtual fragmentation reassembly (VPP-1466)Matus Fabian4-63/+122
Change-Id: I8006bca02948d9121f474a3d14f0576747bb3c51 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2018-10-19vppinfra: add atomic macros for __sync builtinsSirshak Das9-41/+43
This is first part of addition of atomic macros with only macros for __sync builtins. - Based on earlier patch by Damjan (https://gerrit.fd.io/r/#/c/10729/) Additionally - clib_atomic_release macro added and used in the absence of any memory barrier. - clib_atomic_bool_cmp_and_swap added Change-Id: Ie4e48c1e184a652018d1d0d87c4be80ddd180a3b Original-patch-by: Damjan Marion <damarion@cisco.com> Signed-off-by: Sirshak Das <sirshak.das@arm.com> Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com> Reviewed-by: Ola Liljedahl <ola.liljedahl@arm.com> Reviewed-by: Steve Capper <steve.capper@arm.com>
2018-10-18tcp: fix sacks lost bytes counting (VPP-1465)Florin Coras1-34/+90
Change-Id: Ie46b3a81de4ed39b7b40e3879436f7e5a2908d98 Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-10-18tls: fix connection failures/interrupts at scale (VPP-1464)Florin Coras1-2/+3
Change-Id: I0bc4062c1fd3202ee201acb36a2bb14fc6ee1543 Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-10-17acl-plugin: tuplemerge: refresh the pointer to hash-readied ACL entries per ↵Andrew Yourtchenko1-0/+2
each collision in split_partition() (VPP-1458) A pointer to hash-ready ACL rules is only set once, which might cause a crash if there are colliding entries from more than one ACL applied. Solution: reload the pointer based on the element being processed. Change-Id: I7a701c2c3b4236d67293159f2a33c4f967168953 Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com> (cherry picked from commit 84112dd4f98e5a31a8c7340a741f89e77fd03363)
2018-10-17tcp: avoid sack processing when not needed (VPP-1460)Florin Coras1-1/+1
Change-Id: If81ee34e1f1e929de1a5b758ddb9aede4002e858 Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-10-16Fix coverity issue for potentially overflowing of page sizeHaiyang Tan1-3/+3
Change-Id: I2779626d745badb63386efcf729da7a094a4f297 Signed-off-by: Haiyang Tan <haiyangtan@tencent.com>
2018-10-16IGMP: proxy deviceJakub Grajciar15-12/+749
Create 'proxy device' per VRF and add one upstream and one or many downstream interfaces. Change-Id: I1cef05fb01e73a5b483c7a2f4debaaeffe2c8155 Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
2018-10-16vmxnet3: show vmxnet3 with filtering capability [VPP-1452]Steven3-12/+234
show vmxnet3 desc may display 5000 lines of output since it has 5 tables. Each table may have 1000 entries. It would not be very useful to debug problem. We need filtering capability for the subject show command. We need to be able to display the descriptor table per interface, per interface per table, and per interface per table per slot. The latter is the most useful. tested the following valid combinations show vmxnet3 show vmxnet3 desc show vmxnet3 vmxnet3-0/13/0/0 show vmxnet3 vmxnet3-0/13/0/0 desc show vmxnet3 vmxnet3-0/13/0/0 rx-comp show vmxnet3 vmxnet3-0/13/0/0 rx-comp 1 show vmxnet3 vmxnet3-0/13/0/0 tx-comp show vmxnet3 vmxnet3-0/13/0/0 tx-comp 1 show vmxnet3 vmxnet3-0/13/0/0 rx-desc-0 show vmxnet3 vmxnet3-0/13/0/0 rx-desc-0 1 show vmxnet3 vmxnet3-0/13/0/0 rx-desc-1 show vmxnet3 vmxnet3-0/13/0/0 rx-desc-1 1 show vmxnet3 vmxnet3-0/13/0/0 tx-desc show vmxnet3 vmxnet3-0/13/0/0 tx-desc 1 negative tests and command is rejected show vmxnet3 abc show vmxnet3 desc abc show vmxnet3 vmxnet3-0/13/0/0 abc show vmxnet3 vmxnet3-0/13/0/0 desc abc show vmxnet3 vmxnet3-0/13/0/0 rx-comp abc show vmxnet3 vmxnet3-0/13/0/0 rx-comp 1 abc Change-Id: I0ff233413496e58236f8fb4a94e493494c20c5cb Signed-off-by: Steven <sluong@cisco.com>
2018-10-16vmxnet3: vmxnet3_test_plugin.so: undefined symbol: format_vlib_pci_addr ↵Steven1-1/+9
[VPP-1456] When using vpp_api_test, there is an undefined symbol error for format_vlib_pci_addr when vmxnet3_test_plugin.so is loaded. The cause is due to vlib not included in vpp_api_test. Remove the reference for vlib.so in vmxnet3_test. Change-Id: I37c00dfe2f843d99ad6c4fc7af6ed10bac4c2df8 Signed-off-by: Steven <sluong@cisco.com> (cherry picked from commit 3d29e83112a349b7d27ef792463f246b18115d3e)
2018-10-15dpdk: only look at PCI information on PCI devicesStephen Hemminger5-8/+26
The rte_device is use as a base type of all DPDK devices. It is not valid to use container_of to find PCI information unless the bus of the rte_device is pci. Otherwise, the pointer is looking at some other data, which may or may not be zero. This change introduces a helper function to get rte_pci_device pointer. If device is on PCI bus it returns pointer to rte_pci_device info, otherwise it returns NULL. Change-Id: Ia7446006bb93a7a54844969f3b3dd3b918890dfd Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
2018-10-12dpdk: support passing log-levelStephen Hemminger1-1/+2
Since DPDK 17.05, DPDK logging supports per subsystem dynamic logging. Allow passing this as log-level on EAL command line. dpdk { log-level pmd.net.virtio.*:debug ... } Change-Id: If9576c11aba390a5cd2740fc1c9da5768689bd74 Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
2018-10-12NAT44: identity NAT fix (VPP-1441)Matus Fabian4-32/+118
Change-Id: Ic4affc54d15d08b9b730f6ec6146ee053b28b4b6 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2018-10-10vppinfra: introduce clib_mem_vm_ext_free() to avoid fd leaksHaiyang Tan1-1/+1
Change-Id: I8691a10493d159a97574550c111f07722960a7cd Signed-off-by: Haiyang Tan <haiyangtan@tencent.com>
2018-10-10vmxnet3: better error handlingSteven2-20/+42
try harder on output - if there is no descriptor space available, try to free up some and check again. make sure we free the buffer if error is encoutered on input. Change-Id: I41a45213e29de71935afe707889e515037cd081f Signed-off-by: Steven <sluong@cisco.com>
2018-10-10acl-plugin: reduce the syslog level for debug messagesAndrew Yourtchenko1-5/+6
Change-Id: Ie8380cb39424548bf64cb19aee59ec20e29d1e39 Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2018-10-09memif: coverity fixJakub Grajciar1-2/+4
Change-Id: I2b14e2a035a37b04816aac1e610146be58ad1e92 Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
2018-10-08memif: socket filename add/del bugfixJakub Grajciar1-3/+3
Check access rights using effective user/group IDs Change-Id: I3683258c24bcd7817024bffbd56b54b2f596fdd7 Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
2018-10-08Fix coverity issue for NSH pluginHongjun Ni1-69/+70
Change-Id: Ie99ff9aebe3c896e3e104a5a7bebd84f7766e713 Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>
2018-10-08NAT44: do not create session record for identity mapping (VPP-1439)Matus Fabian10-103/+233
Change-Id: I39a3146a4e4ba8eadf50af7113b9ae6b1c1d688f Signed-off-by: Matus Fabian <matfabia@cisco.com>
2018-10-05Source VRF Select testsNeale Ranns2-9/+15
Change-Id: Id6c16462fccf890eaa0e526ad048e032c9da8800 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-10-05NAT: convert remaining clib_warning to nat_log_*Juraj Sloboda4-30/+30
Change-Id: Ie999ab852cc3775ec90820624d97be746d2590a4 Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
2018-10-04acl-plugin: tuplemerge: avoid batch-resize of the applied entries vector - ↵Andrew Yourtchenko1-2/+6
VPP-1352 If the number of rules within a given partition exceeds the limit, the split_partition() might get called, in which we calculate the relaxed mask, create a new partition with that mask and attempt to reallocate some entries from the overcrowded partition. The non-TM code was pre-expanding the vector with rules by the number of rules in the new ACL being applied - which caused the split_partition() to iterate over the rules filled with zeroes. Most of the time it is benign, but if a newly created relaxed partition is such that these entries can be "relocated", then the code attempts to do so, which does not end well. Change-Id: I2dbf3ccd29ff97277b21cdb11c4424ff0915c3b7 Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2018-10-03vmxnet3: coverity woeSteven2-12/+12
Coverity complains that hb might be null when !prev_b0 is true. It may be right, but not likely. To make the code more explicit when it parses a complete packet, set got_packet = 1 and test got_packet instead of prev_b0 which is somewhat obscure. Use vlib_buffer_free_one rather than vlib_buffer_free_no_next in output.c which takes care of chain buffers. Change-Id: I6e0587605fdc622c3f55fedd74c474666631ed91 Signed-off-by: Steven <sluong@cisco.com>
2018-10-03memif: include interface name in logsJuraj Sloboda3-29/+57
Change-Id: I67f58aa93c721dbd518cc2ddcea330006693662f Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
2018-10-03VPP-1440: clean up coverity warningsDave Barach1-2/+2
Change-Id: Ie315d4e83c0575d82aee0369ef50e8dd2dad6a2a Signed-off-by: Dave Barach <dave@barachs.net>
2018-10-03vmxnet3: error handlingSteven4-60/+84
outbound -- if we have to drop the packet due to no descriptor space is available, drop the whole packet, not fragments. inbound -- check and drop error packets Change-Id: Ida1d32e61521bafd67f714d729ad53cd7c487dc6 Signed-off-by: Steven <sluong@cisco.com>
2018-10-02VPP-1440: clean up coverity warningsDave Barach2-5/+8
Change-Id: Ic6823fb617ecae547a5f0e28b1e037848e40f682 Signed-off-by: Dave Barach <dave@barachs.net>
2018-10-02Update code to compute checksum for buffer chainsJuraj Sloboda2-6/+10
Compute ICMP checksum for buffer chains Fix checksum function for buffer chains Change-Id: I39b845b94a63c3ab5fc9f6f9ab36cadbc67c104f Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
2018-10-02tls: fix disconnects for sessions with pending dataFlorin Coras2-20/+20
TLS can enqueue events to itself when app session queue cannot be entirely drained. If a pending disconnect is handled before any such event, session layer may try to dequeue data on deallocated sessions. Change-Id: I5bfc4d53ce95bc16b6a01e1b0e644aafa1ca311b Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-10-01Source VRF SelectNeale Ranns7-0/+1141
match against a packet's source address to determine the VRF for the subsequent destination address lookup. Change-Id: I48ee0ef54dcb891f0ec7f879e4d3b925a0ed0081 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-10-01Rename device class from PPPPOE to PPPoEPaul Vinciguerra2-10/+10
Change-Id: Ia20eee6cef360b1acd768101df0713f0005a7d14 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2018-10-01thread: Add show threads apiMohsin Kazmi3-3/+3
Change-Id: I3124238ab4d43bcef5590bad33a4ff0b5d8b7d15 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2018-10-01IGMP: handle (*,G) report with no source addressesNeale Ranns1-8/+14
Change-Id: I363370b9d4a27b992bad55c48fc930a2fbea2165 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-09-28MAP: Add check for well known ports.Ole Troan1-0/+8
And more unit-tests. Change-Id: I4667d82d928b7ba8d96b5a5648d464115b3ed216 Signed-off-by: Ole Troan <ot@cisco.com>
2018-09-27MAP: Correctly print ea-bits-len in map commands.Ole Troan1-1/+1
Change-Id: I17b19875547cd6056aaf8f8fde439caa8e42d274 Signed-off-by: Ole Troan <ot@cisco.com>
2018-09-27MAP: 64-bit DMROle Troan2-17/+15
Change-Id: I261e11f1006039e4a4019fec2fd3271763ae476a Signed-off-by: Ole Troan <ot@cisco.com>
2018-09-27dpdk_plugin: fix mlx5 build and runtime issuesSirshak Das1-2/+10
There are issues with VPP finding and linking the mlx5 shared glue library which was built by default if mlx5 was enabled. Runtime Errors this patch fixes: net_mlx5: cannot load glue library: librte_pmd_mlx5_glue.so.18.05.0: cannot open shared object file: No such file or directory net_mlx5: cannot initialize PMD due to missing run-time dependency on rdma-core libraries (libibverbs, libmlx5) This patch introduces additional config parameter to disable glue library building and instead statically link ibverbs and mlx5 libraries to the PMD and dpdk_plugin. Change-Id: I0b2f67652a57854c778e991780903fb15706ace8 Signed-off-by: Sirshak Das <sirshak.das@arm.com> Reviewed-by: Lijian Zhang <Lijian.Zhang@arm.com>
2018-09-27add cmake build option to build openssl asyncPing Yu1-0/+11
This code is orignally in automake, but it is missing in cmake. Thus add it to make openssl async work in cmake build system Change-Id: Ie69ee9c2099273e51ce13ccab27bdd2619db4814 Signed-off-by: Ping Yu <ping.yu@intel.com>
2018-09-27avf: may crash if failed to allocate buffers to ringSteven1-1/+1
In avf_rxq_refill, we invoke vlib_buffer_alloc_to_ring which may fill buffers from the end of the ring and continue to the beginning of the ring. If we fill some in the end and continue to fill some in the beginning, but does not have enough buffers to fill the whole request, n_alloc returns a value which is not equal to n_refill to indicate partial refill. We don't like partial refill and invoke vlib_buffer_free to get rid of the buffers that just got refilled. However, vlib_buffer_free API is to free the buffers from the slot continuously. It does not know how to free some from rxq->bufs[slot], and then continue to free the rest when it reaches the end of the ring. The fix is to use vlib_buffer_free_from_ring which is smart enough to figure that stuff out. Change-Id: I93c28e0b0d8d8f22c321d1a5912e00c27b4e2e8d Signed-off-by: Steven <sluong@cisco.com>
2018-09-27IPIP and IPv6 fragmentationOle Troan4-19/+4
- Error where ICMPv6 error code doesn't reset VLIB_TX = -1 Leading to crash for ICMP generated on tunnelled packets - Missed setting VNET_BUFFER_F_LOCALLY_ORIGINATED, so IP in IPv6 packets never got fragmented. - Add support for fragmentation of buffer chains. - Remove support for inner fragmentation in frag code itself. Change-Id: If9a97301b7e35ca97ffa5c0fada2b9e7e7dbfb27 Signed-off-by: Ole Troan <ot@cisco.com>
2018-09-26vmxnet3: delete interface causes a crashSteven1-9/+4
Need to free the buffers starting from ring->consume+1, not ring->consume Make use of the cool API vlib_buffer_free_from_ring Fix a memory leak in vmxnet3_txq_init Change-Id: I0a539ea75211408d84ce433d97a0a0aec5a9618d Signed-off-by: Steven <sluong@cisco.com>
2018-09-26acl-plugin: fix the stateful ICMP handling and add testcasesAndrew Yourtchenko1-39/+40
The stateful ICMP/ICMPv6 handling got broken. Fix that and introduce testcases to catch in the future. Change-Id: Ie602e72d6ac613d64ab0bf6693b6d75afb1a9552 Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2018-09-26dpdk: fix QSFP+ module infoDamjan Marion1-1/+2
Change-Id: I89c7df778e66a5d2147190dc99445405d81964e5 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-09-26NAT44: endpoint-dependent mode session timeout improvement (VPP-1423)Matus Fabian2-0/+28
Change-Id: Ib62e503f4eb5d72431288de32f417a4553df4e0c Signed-off-by: Matus Fabian <matfabia@cisco.com>