aboutsummaryrefslogtreecommitdiffstats
path: root/src/plugins
AgeCommit message (Collapse)AuthorFilesLines
2019-06-07lacp: create lacp-process on demandSteven Luong4-26/+86
Create lacp-process when the very first slave interface is added to the bond. Log an event message when lacp-process starts/stops. Be mindful when lacp-process is signalled to stop. Type: refactor Change-Id: I79e10e0a2a385a21a52ae5b8735f24631fdba293 Signed-off-by: Steven Luong <sluong@cisco.com>
2019-06-07no trigger nat ipfix flush in first workerdongjuan1-1/+1
Change-Id: I4dbeed0b94003a698e9218648d4b352db6fbb70e Signed-off-by: dongjuan <dong.juan1@zte.com.cn>
2019-06-06dpdk: fix clear hw statsFilip Tehlar3-3/+3
.. and remove helper stat struct for keeping last cleared stats. This is not needed anymore as dpdk lib provides rte_eth_dev_reset(). Change-Id: I78076e689aac7ca70836ce688dfa8e704f64cd84 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2019-06-06gbp: fix lpm classification with vlanBenoît Ganne1-50/+12
Fix GBP LPM packet classification in the presence of a VLAN header. Change-Id: I2ff63b34f7475d696b10b5a245ff802bbb1ff01a Signed-off-by: Benoît Ganne <bganne@cisco.com>
2019-06-06gbp: do not classify unknown packet as EP packetsBenoît Ganne1-0/+4
If we fail to classify the packet based on LPM we must not classify it based on the EP sclass. Change-Id: Ie234e0c87bd44976c3c57c818359c93f7d99ab84 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2019-06-06lb: crashed with some specific commit under heavy trafficHongjun Ni3-5/+13
- When deleting VIP member with flush, VPP will crash. - When deleting VIP member without flush, vpp won't crash. - This crash is almost 100% reproductive. Ticket: VPP-1680 Type: fix Change-Id: Ia4e8f9e0f987176c7f6ec52c92e66563f313b0c3 Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>
2019-06-05avf: enable promiscuous modeSteven Luong3-1/+18
In order to receive multicast packets from the VF interface, promiscuos mode must be enable. Type: fix Fixes: b4ff07a Change-Id: I549bc37a05895d3355f2832c200e9262c95a27b5 Signed-off-by: Steven Luong <sluong@cisco.com>
2019-06-05L3 cross connectNeale Ranns9-0/+1252
- all packets input on interface X are load-balanced over the set of paths provided. Change-Id: Ic27cb88c4cd5d6d3462570632daff7a43d5a652d Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-06-04features will register udp ports once configuredJakub Grajciar1-3/+5
plugins: - ipfixcollector vnet: - geneve - vxlan_gpe - vxlan Change-Id: I69a8b4017ee6990f2b4874fe3e94c4520bde7101 Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
2019-06-04mactime: upstream new featuresDave Barach6-25/+161
Add per mac address data quotas (simple version) Add mini-ACLs to turf "call home" traffic from a certain species of security DVR. Add FEATURE.yaml Update the API version number Type: feature Feature-name: mactime Change-Id: Ida6945f7791ab43909afa68dcf2f652b20c53afd Signed-off-by: Dave Barach <dave@barachs.net>
2019-06-04dpdk: rework extended statsFilip Tehlar4-47/+33
Change-Id: I421192e1921d4c9c5486a6dcca745582aebf4e3e Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2019-06-03GBP: add subnet cli commandBenoît Ganne1-2/+85
Change-Id: I0f631da9d13df2d9c32bad879b2a6034cb847378 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2019-06-03crypto_ia32: native AES-GCM implementationDamjan Marion5-1/+1046
Change-Id: I006a150577e897731649f21908b4789e2eb485c3 Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-05-31tools: FEATURE.yaml meta-data infrastructureOle Troan2-0/+26
Add tooling for feature metadata configuration files. The main tool is in src/scripts/fts.py make checkfeaturelist to validate against schema. make featurelist to dump all feature lists to stdout. Example feature definition: name: IP in IP tunnelling maintainer: Ole Troan <ot@cisco.com> features: - IPv4/IPv6 over IPv4/IPv6 encapsulation: - Fragmentation and Reassembly - Configurable MTU - Inner to outer Traffic Class / TOS copy - Configurable Traffic Class / TOS - ICMPv4 / ICMPv6 proxying - 6RD (RFC5969): - Border Relay description: "Implements IP{v4,v6} over IP{v4,v6} tunnelling as described in RFC2473. This module also implement the border relay of 6RD (RFC5969)." state: production properties: [API, CLI, STATS, MULTITHREAD] missing: - Tunnel PMTUD - Tracking of FIB state for tunnel state - IPv6 extension headers (Tunnel encapsulation limit option) JSON schema is embedded in fts.py Example markdown: https://github.com/otroan/scratch/blob/master/features.md Change-Id: I903b4ee6b316a9378c259e86dc937092e5d4b7da Type: make Signed-off-by: Ole Troan <ot@cisco.com>
2019-05-31crypo_ia32: don't optimize debug buildsDamjan Marion2-1/+5
Type: fix Fixes: d5023a72 Change-Id: I17cf7887d1274cf3ca9301ec87b8c8f539359456 Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-05-31Update vnet hardware flags if link state changesDave Barach1-1/+9
Explains a variety of hard-to-diagnose problems with certain Atom and Denverton NIC types. I finally tripped over a highly-repeatable failure: home gateway use-case bitten by refusal to negotiate a DHCP lease for the trunk port. The dhcp client won't send pkts unless VNET_HW_INTERFACE_FLAG_LINK_UP is set on the tx hw interface: /* Interface(s) down? */ if ((hw->flags & VNET_HW_INTERFACE_FLAG_LINK_UP) == 0) return; Change-Id: I17ef2ba7b39078555fa27d2d874a60c67e1530ee Signed-off-by: Dave Barach <dave@barachs.net>
2019-05-31bonding: add support for numa awarenessZhiyong Yang1-0/+1
This patch enables bonding numa awareness on multi-socket server working in active-backeup mode. The VPP adds capability for automatically preferring slave with local numa node in order to reduces the load on the QPI-bus and improve system overall performance in multi-socket use cases. Users doesn't need to add any extra operation as usual. Change-Id: Iec267375fc399a9a0c0a7dca649fadb994d36671 Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
2019-05-30nat44: fix CLI doc errorjackiechen19851-2/+2
Change-Id: Iac6bd29389839c9eb8c1ff2105b4da69b6e1ce3e Signed-off-by: jackiechen1985 <xiaobo.chen@tieto.com>
2019-05-30dpdk: remove bonding codeDamjan Marion6-251/+11
We have native implementation and we should not maintain both.... Change-Id: Ic09ebffda52cdc733b3cfeff06690e0d3cc08084 Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-05-30NAT: create bypass in correct thread if workers>1Alexander Chernavin1-9/+40
Change-Id: I70817579a09a7026f5fa7c8e71babded891ea285 Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
2019-05-29Start the cdp period process on demandDave Barach4-22/+20
Change-Id: I219b270f905dad5939ab38e933712845c314286d Signed-off-by: Dave Barach <dave@barachs.net>
2019-05-29dpdk: make sure each segment have initalized rte_mbufDamjan Marion1-12/+4
Change-Id: I0e28d059143fb7489d27a10c5b4a152d0d7dfb1f Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-05-29map: Use vl_api_string macros.Paul Vinciguerra2-27/+9
* Add optional tag to api call in tests * Add test for map_domain_dump() for api code coverage. Type: fix Change-Id: I2f7784aecdca4bf9e94de3319f959786e3d2c607 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-05-29plugins: http_static. Migrate to use api string type.Paul Vinciguerra3-11/+23
This is not my core competency. Reviews/feedback/suggestions welcomed. ;) Tested with: rv = self.vapi.http_static_enable( fifo_size = 1, cache_size_limit = 1000000, prealloc_fifos = 0, private_segment_size = 0, uri="tcp://0.0.0.0/80", www_root = "/var/tmp/run/vpp/html" ) DBGvpp# show http static server www_root /var/tmp/run/vpp/html, cache size 0 bytes, limit 1000000 bytes, evictions 0 Change-Id: I0f660753317ceedab89da1b65701a24d6f7145de Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-05-28nsim: remove buffer u32 upper boundKorian Edeline1-1/+1
Extreme BDP flows requires more buffer memory. Change-Id: I1134be248c6bdd719fa1a033bca41414ceb73371 Signed-off-by: Korian Edeline <korian.edeline@ulg.ac.be>
2019-05-28Add an ip6 local hop-by-hop protocol demux tableDave Barach1-4/+2
Add a minimal ip6 hbh header processing test. ioam plugin: use ip6_local_hop_by_hop_register_protocol() in udp_ping_init(). Please test the ioam plugin udp_ping path AYEC, so I can publish the patch. Change-Id: I74e35276d6c38c31022026cfd238fad5e4a54485 Signed-off-by: Dave Barach <dave@barachs.net>
2019-05-28nat44: make nat44-ed-hairpin-src follow arcMatthew Smith1-1/+1
It defaults to using interface-output as the next node. If other output features are enabled on the ip4-output arc, they get skipped. That makes me sad. Change-Id: I3f4d3320fb8092918e1e0663c66baca1c74c26ec Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2019-05-27unittest: fix test crypto perf for AEAD algosDamjan Marion1-2/+3
Change-Id: I055014ff0bc7f6d32d59eaf3511ecb91e268d49b Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-05-27dpdk: vlan strip config does not take effect in default deviceChenmin Sun1-0/+6
copy vlan strip config from default device Change-Id: I4ad1c159bad964fd1900b5ae4960b7014dd9f9b1 Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
2019-05-27dpdk: fix rss configuration error issueChenmin Sun1-7/+5
Reorder foreach_dpdk_rss_hf to fix rss configuration error issue. Change-Id: Idec45534cd7dfe810b25584b1b27ac52b1c45110 Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
2019-05-24udp-ping: disable due to conflict with mldv2Florin Coras1-2/+4
Change-Id: I9e6a0fb583b0b6dd9b5e16aa9169bdf7b99a7664 Signed-off-by: Florin Coras <fcoras@cisco.com>
2019-05-24Add callback multiplex supportDave Barach1-15/+47
Change-Id: Iddeb3a1b0e20706e72ec8f74dabc60b342f003ba Signed-off-by: Dave Barach <dave@barachs.net>
2019-05-24rdma: add support for promiscuous modeBenoît Ganne2-71/+145
rdma interfaces filter packets per MAC by default to share the physical interface between multiple users (eg. VPP and Linux). When configured in promiscuous mode, all packets will go to this interface, regardless of the MAC. All other interface will not receive anymore packet while it is in promiscuous mode. Promiscuous mode is needed (and automatically turned on) for L2 path (l2patch, xconnect, bridge...). Change-Id: I4c0eb4421f51d116e635e7828d00f202f4a97ded Signed-off-by: Benoît Ganne <bganne@cisco.com>
2019-05-23fix rte_eth_dev_info’ has no member named ‘pci_dev’ when run ↵cohu1-5/+9
show_dpdk_hqos_queue_stats Change-Id: Ic1a900e0fb85ee016af21535764dfca2e6282194 Signed-off-by: cohu <cong.hu@tieto.com>
2019-05-23crypto_ia32: multiarchDamjan Marion5-58/+70
Change-Id: Iead43a2b524b735a2069e611d899cd41d3a8efdc Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-05-23Fix vpp crash bug while deleting dhcp clientjackiechen19851-0/+1
We must do lock fib while vrf id ~0, otherwise it crashes while unlocking fib. Change-Id: Iec9754ccd67634a132bc5384a4f796d4a65943ae Signed-off-by: jackiechen1985 <xiaobo.chen@tieto.com>
2019-05-23fix show session verbose crash with quic transportDave Wallace1-2/+48
Type: fix Change-Id: I8199c233f6968ac147fb1867a4f10ef04d67642f Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2019-05-22gtpu: don't register udp ports unless a tunnel is createdJakub Grajciar1-5/+11
Change-Id: I2945c2a2062ee5eda78f783c55cf16c2d60f959c Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
2019-05-22Fix Diffie-Hellman exchange with newer openssl APIChristian E. Hopps1-21/+16
Change-Id: Id42a597c130d0053d074446e552a81c7264549e7 Signed-off-by: Christian E. Hopps <chopps@chopps.org>
2019-05-21docs: add quic subpage to user docsVratko Polak1-1/+1
+ Sort subpage list. + Fix copypaste error in quic doc label. Change-Id: Id8bdb4ad0d744f9886db3631ddad0e29bbb3c938 Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2019-05-21vmxnet3: gso_l4_hdr_sz is not set correctlySteven Luong1-16/+24
vnet_buffer2 -> gso_l4_hdr_sz is not set correctly because vnet_buffer->l4_hdr_offset is not set yet at the top. Move the code to set vnet_buffer->gso_l4_hdr_sz further down. Change-Id: I0110e4687572bb93cb593d7d4d14a3d5083af13a Signed-off-by: Steven Luong <sluong@cisco.com>
2019-05-21QUIC: Add initial documentationAloys Augustin1-0/+38
Change-Id: Ic00f8827f572e13b07d55c6c2f10fb6cdebf7e72 Signed-off-by: Aloys Augustin <aloaugus@cisco.com>
2019-05-20openssl plugin 3des routine iv_len fixVladimir Ratnikov1-1/+7
Since 3DES has 8 bytes of initialization vector and code contains hardcode for 16 bytes, check added to determine if crypto algorythm is 3DES_CBC and set corresponding iv_len param Change-Id: Iac50c8a8241e321e3b4d576c88f2496852bd905c Signed-off-by: Vladimir Ratnikov <vratnikov@netgate.com>
2019-05-17Fix punctuation fails in 2x pluginsDave Barach2-2/+2
More to the point: fix the Python API binding for the plugins. The http_static and ct6 plugin setup_message_id_table calls didn't have "_"'s between message names and CRCs. I would have expected this to originate in the emacs skeleton, but the skeleton is correct. Punctuation saves lives: "Let's eat Grandma..." != "Let's eat, Grandma..." More or less. Change-Id: Icd87813308701d203cf6f147b2bb90d39d51ddeb Signed-off-by: Dave Barach <dave@barachs.net>
2019-05-17dpdk-ipsec: fix encrypt/decrypt single queueSergio Gonzalez Monroy6-39/+58
When the same worker thread processes packet for encrypt and decrypt, ie. single worker with bi-directional traffic, given that the queue is shared results in packets to be decrypted being dropped as the encrypt always happens first for each main loop. With this change, each crypto device queue is logically split into two queues, each half the real size, avoiding the described problem. Change-Id: Ifd3f15e316c92fbd6ca05802456b10a7f73f85da Signed-off-by: Sergio Gonzalez Monroy <sgmonroy@gmail.com>
2019-05-16init / exit function orderingDave Barach30-192/+194
The vlib init function subsystem now supports a mix of procedural and formally-specified ordering constraints. We should eliminate procedural knowledge wherever possible. The following schemes are *roughly* equivalent: static clib_error_t *init_runs_first (vlib_main_t *vm) { clib_error_t *error; ... do some stuff... if ((error = vlib_call_init_function (init_runs_next))) return error; ... } VLIB_INIT_FUNCTION (init_runs_first); and static clib_error_t *init_runs_first (vlib_main_t *vm) { ... do some stuff... } VLIB_INIT_FUNCTION (init_runs_first) = { .runs_before = VLIB_INITS("init_runs_next"), }; The first form will [most likely] call "init_runs_next" on the spot. The second form means that "init_runs_first" runs before "init_runs_next," possibly much earlier in the sequence. Please DO NOT construct sets of init functions where A before B actually means A *right before* B. It's not necessary - simply combine A and B - and it leads to hugely annoying debugging exercises when trying to switch from ad-hoc procedural ordering constraints to formal ordering constraints. Change-Id: I5e4353503bf43b4acb11a45fb33c79a5ade8426c Signed-off-by: Dave Barach <dave@barachs.net>
2019-05-16Add default value for API Nat flagsMichal Cmarada1-0/+1
Change-Id: I4f1b83ae1c746b8f67f2d12a02081702b9553b44 Signed-off-by: Michal Cmarada <mcmarada@cisco.com>
2019-05-15Add QUIC human readable error logsNathan Skrzypczak1-7/+56
Change-Id: I01cf5074b5a8b0018de5c3f59c9266d350c22f37 Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
2019-05-15Remove unused function nat44_ha_resync() and error IN_PROGRESS.Jon Loeliger1-38/+0
The unused function nat44_ha_resync() was the only function that used the error message VNET_API_ERROR_IN_PROGRESS. The error was the only error code that was positive, and didn't really play well with the other error codes. Change-Id: I7d03c2ee915094b635f6efdca7427f71e4d19f2b Signed-off-by: Jon Loeliger <jdl@netgate.com>
2019-05-14QUIC multi thread updateAloys Augustin2-253/+299
* Add support for multiple threads * Replace quicly buffers with fifos * Fix cleanup of sessions * Update quicly release version Change-Id: I551f936bbec05a15703f043ee85c8e1ba0ab9723 Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>