Age | Commit message (Collapse) | Author | Files | Lines |
|
When IPFIX flow record generation is enabled on an interface and the
active timer is set, flows will be saved and then exported according to
the active and passive timers. If then disable the feature on the
interface, the flow entries currently saved will remain in the state
tables. They will gradually expire and be exported. The problem is that
the template for them has already been removed. And they will be sent
with zero template ID which will make them unreadable.
A similar problem will occur if feature settings are "changed" on the
interface - i.e. disable the feature and re-enable it with different
settings (e.g. set a different datapath). The remaining flows that
correspond to the previous feature settings will be eventually sent
either with zero template ID or with template ID that corresponds to the
current feature settings on the interface (and look like garbage data).
With this fix, flush the current buffers before template removal and
clear the remaining flows of the interface during feature disabling.
Type: fix
Change-Id: I1e57db06adfdd3a02fed1a6a89b5418f85a35e16
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
(cherry picked from commit f68afe85a6e4d5e00fdad1af19a76eb40fdfa388)
|
|
Currently, L2 flows are exported using L2_IP6 template if L3 or L4
recording is enabled on L2 datapath. That occurs because during feature
enable, L2 template is added and its ID is not saved immediately. Then
L2_IP4 and L2_IP6 templates are added overwriting "template_id" each
time. And in the end, the current value of "template_id" is saved for L2
template. The problem is that "template_id" at that point contains the
ID of L2_IP6 template.
With this fix, save the template ID immediately after adding a template
for all variants (datapaths). Also, cover the case with a test.
Type: fix
Change-Id: Id27288043b3b8f0e89e77f45ae9a01fa7439e20e
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
(cherry picked from commit 120095d3d33bfac64c1f3c870f8a332eeaf638f0)
|
|
memif_disconect may be called without barrier sync. It removes stuff in mq
without protection which may cause troubles for memif RX/TX worker threads.
The fix is to protect mq removal in memif_disconnect.
Type: fix
Change-Id: I368c466d1f13df98980dfa87e8442fbcd822a428
Signed-off-by: Steven Luong <sluong@cisco.com>
(cherry picked from commit 34c721fb47155135bf2173ca7b9a31aaacfde190)
|
|
Type: fix
Change-Id: I35b3920288269073cdd35f79c938396128d169c9
Signed-off-by: Brian Morris <bmorris2@cisco.com>
(cherry picked from commit 733e093e7099552a4609dc5efadf9261df7778d4)
|
|
This patch provides minor improvements to the logic governing dequeuing
from the ring. Previously whenever a frame was dequeued
we've been trying to dequeue from the ring another one till
inflight == 0. Now threshold is set for 8 frames pending in the cache
to be consumed by the vnet. This threshold has been chosen based on
cache ring stats observation in the system under load.
Some unnecessary logic for setting deq_tail has been removed.
Also logging has been corrected, and cache ring logic simplied.
Type: improvement
Signed-off-by: Piotr Bronowski <piotrx.bronowski@intel.com>
Change-Id: I19f3daf5913006e9cb23e142a163f596e85f5bda
(cherry picked from commit 7cc17f6df9b3f4b45aaac16ba0aa098d6cd58794)
|
|
Session input node handles rx notifications even if session not fully
accepted/connected
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I6560c45db8f8e0b7f0dc3bdd0939f13ca2f43f15
(cherry picked from commit aa7b88120ad83a29a05522bed4e5aa71524b8aba)
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ic7a8fd37d79fc9c09c8b1539d630f3b8983b8bb3
(cherry picked from commit c1b038001e1f18effb3c9ff5daa9e9cac1cd66e8)
|
|
If the control agent enabled a binding on an interface multiple times,
we would add the node in the feature arc multiple times.
Type: fix
Change-Id: I2ca247db0a0211f5fa3974a18ca4fcae8485cb12
Signed-off-by: Ole Troan <otroan@employees.org>
|
|
Setting session limit should return error for unknown fib.
Optimize max_translations_per_fib expanding and drop unnecessary
trailing fib entry.
Type: fix
Change-Id: Ie7d2b363ade48f53598faa617a49cce7b2db6400
Signed-off-by: Vladislav Grishenko <themiron@yandex-team.ru>
|
|
Session state cannot be updated after async notification event is
generated for app. Instead, make sure quic sessions that accept new
streams are switched to listening state only on accept.
Type: fix
Fixes: 0242d30
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I9663ccadbea99d555ad49e871f7dff897239dc84
|
|
As discussed on the VPP call, since CSIT tests use these messages
and they have not been changedfor quite a while, bump the version
so these messages are considered as "production" from the change
process standpoint.
Type: improvement
Change-Id: I93a04b10b273d5904c0678fa0b85d47f9f683a9b
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
As per discussion on VPP call - since the APIs are used in CSIT tests,
and there has not been changes in a while, mark them as stable from
the API change process PoV.
Type: improvement
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
Change-Id: Ia644e1dfcd9d182cc6f10089fc44397a61e8aaf6
|
|
As per discussion on the VPP call: since the CSIT tests use these
APIs and the APIs have not changed in quite a while, stabilize the API
from the change process point of view.
Type: improvement
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
Change-Id: Id81999d03cce37764f6ed7d4f77ef5a71fe41ad1
|
|
Type: fix
Change-Id: Ieb50ab548bb34bdbb44d973037ee452d48f412ea
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
|
|
Type: improvement
Change-Id: I2daa8fc338289555649135e7f0898e139807fdce
Signed-off-by: Damjan Marion <damjan.marion@gmail.com>
|
|
perf_user_access_enabled is defined as u8,
clib_sysfs_read format type is %u, this is for unsigned int,
change type from u8 to u32.
Type: fix
Fixes: 268d7be66b8b ("perfmon: enable perfmon plugin for Arm")
Signed-off-by: Tianyu Li <tianyu.li@arm.com>
Change-Id: I48ec00605e496d185370e77d894d7852d6d22124
|
|
The checkstyle --fix command remains confused
around the def/foreach/undef usage in convert_async_crypto_id,
but at least the other functions now look correctly indented to me.
Type: style
Change-Id: Ic8f7b580267386b7a6b07d33d9ba7ae9787c0e0a
Signed-off-by: Vratko Polak <vrpolak@cisco.com>
|
|
The logic for calcuating processed elements in the cache ring was broken.
In case tail and deq_tail equals and frame element pointed by the tile
is not NULL it means there is exactly one processed element in the ring.
Type: fix
Signed-off-by: Piotr Bronowski <piotrx.bronowski@intel.com>
Change-Id: I69c978334fc952049393214ccc9cc5245351f7f7
|
|
Use client address hash to pick the first outside address
instead of just address high octet, becasue it may denegerate
into stable 10/172/192, depending on nat address count.
Fix outside address distribution test to acually test the
distribution, not the algo, so previous distribution will
fail with 65 nat addresses and 100 clients:
FAIL: Outside address distribution based on source address
Traceback (most recent call last):
File ".../test/test_nat44_ed.py", line 2048, in test_outside_address_distribution
msg="Bad outside address distribution")
AssertionError: 156.25 not less than 0.33 : Bad outside address distribution
Type: improvement
Change-Id: I604b1294422f20d211db5614c47559557a78a193
Signed-off-by: Vladislav Grishenko <themiron@yandex-team.ru>
|
|
Several api messages were not mp-safe although marked as such
because non-zero base id was not taken into account, and therefore
some other (from zero base id) were falsely mp-safe instead.
Keep messages as mp-safe, as they falsely were before:
10 get_first_msg_id 0 1
12 api_versions 0 1
Messages that are no longer mp-safe as they weren't marked:
15 sockclnt_create 0 1
33 proxy_arp_intfc_dump 0 1
Fix messages to be really mp-safe:
809 bridge_domain_dump 0 1
920 ip_route_add_del 0 1
921 ip_route_add_del_v2 0 1
1362 get_node_graph 0 1
1671 create_vhost_user_if 0 1
1675 create_vhost_user_if_v2 0 1
Additionally mark messages as mp-safe, seems they need no barrier:
1360 show_threads 0 1
1370 show_version 0 1
1372 show_vpe_system_time 0 1
Type: fix
Change-Id: Ie6c1e3aa89f26bf51bfbcb7e7c4d9fee885487b7
Signed-off-by: Vladislav Grishenko <themiron@yandex-team.ru>
|
|
Plugin is still in experimental state. No reason why it needs
to be default enabled.
Type: fix
Change-Id: Ibf1810215d4c8079a068bfc60aa7dd49306ee4e4
Signed-off-by: Ole Troan <otroan@employees.org>
|
|
The new arping_acd call includes the responders mac address in the reply.
Enabling a client doing address conflict detection to identify if it
is itself that is replying or that it is another host uses the IP
address.
Type: feature
Change-Id: Ia4bab2af1086f06ed71ba42e2e07368d4e330a27
Signed-off-by: Ole Troan <otroan@employees.org>
|
|
Applied the checksum delta to the source address instead of the destination address
in the RX direction.
Cleaned up tests a little.
Type: fix
Change-Id: I871f3448365587e5319dfbca6ea356935321ff9b
Signed-off-by: Ole Troan <otroan@employees.org>
|
|
In order to be able to filter on encapsulated packet, a new node
has been added to the ip4/6-unicast arcs.
Type: feature
Change-Id: I1e8ee05bc6d0fce20cadd8319c81bab260c17d21
Signed-off-by: Maxime Peim <mpeim@cisco.com>
|
|
Fifos need to be synchronously allocated once a transport like tcp
accepts a session. Since events are now delivered asynchronously,
proxy apps must explicitly register a cb function that manages
fifo allocation prior to being notified of connect event.
Type: fix
Fixes: 0242d30
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I7df973b7014e53e0766ea2bdc61e9871160bc18b
|
|
For the reasons of modularity and security, it is useful
to have various functionality split into processes different from VPP.
However, this approach presents the challenges of managing those processes,
and is markedly different from simply running everything within VPP process.
This plugin is an experiment in having the VPP itself start off a monitor
process which in turn starts the child processes, and restarts them if they
quit.
If the VPP process ceases to exist, the monitor process terminates all
the descendant processes and quits itself.
This allows to preserve the "single entity to manage" approach of
simply running a barebones VPP.
An example of running it:
export DPDK_CONFIG=""
export DISABLED_PLUGINS=dpdk
export EXTRA_VPP_CONFIG="fateshare { monitor ./build-root/install-vpp_debug-native/vpp/bin/vpp_fateshare_monitor command ./test1 }"
make run
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
Change-Id: I66221fd7403f220d9652fe76958ca499cfd070a7
Type: feature
|
|
fix lb static mapping
"nat44_ed_sm_o2i_add" laddr and lport
Type: fix
Signed-off-by: Wei Li <realbaseball2008@gmail.com>
Change-Id: I249a00919e8154d92cbce03f6db196c13612948f
|
|
lport and eport in Cli "nat44 add load-balancing static mapping" should hton()
Type: fix
Signed-off-by: Wei Li <realbaseball2008@gmail.com>
Change-Id: I2eadb7e341efb70cc406e10b3b189e5ebff09ff4
|
|
Type: fix
Change-Id: I4ab713811626c097c7927228f3819b7785bbb951
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
This is the initial commit of a NPTv6 (RFC6296) implementation for VPP.
It's restricted to a single internal to external binding and runs
as an output/input feature on the egress interface.
Type: feature
Change-Id: I0e3497af97f1ebd99377b84dbf599ecea935ca24
Signed-off-by: Ole Troan <otroan@employees.org>
|
|
This patch addresses coverity issues CID 322716 and CID 322717.
Type: fix
Signed-off-by: Piotr Bronowski <piotrx.bronowski@intel.com>
Change-Id: I59d6f40c1af8e829d8cb3c042a52e144aeaf1e6b
|
|
s/nat44 enable sessions/nat44 plugin enable sessions/
Type: docs
Change-Id: I93dbd161f085bff5b98df50cd29c9bedf5038307
Signed-off-by: Steven Luong <sluong@cisco.com>
|
|
Sw ring is renamed to the cache ring. This name better reflects the
puropse of this ring. We've introduced push/pop functions, as well as
other utility functions which remove code repetition. Error handlig
is improved: previously in case of an error all frame elements were
marked as bad, now only these for which errors occured have the error
status set.
Unnecessary stats counters have been removed.
Type: improvement
Signed-off-by: Piotr Bronowski <piotrx.bronowski@intel.com>
Change-Id: I2fd42a529ac84ce5ad260611d6b35a861d441c79
|
|
Type: feature
this patch adds a new tag "host" to interfaces for cnat-snat
if an interface is tagged pod and host we do not snat traffic outgoing through it
Change-Id: I71f5bfcb85581bb8508ba547374f0603f1079ac6
Signed-off-by: hedi bouattour <hedibouattour2010@gmail.com>
|
|
Add a new native idpf driver. This patch enables the device
initialization. Add some necessary functions and definations
for input and output. A new version of virtchnl is introduced.
Type: feature
Signed-off-by: Ting Xu <ting.xu@intel.com>
Change-Id: Ibbd9cd645e64469f1c4c8b33346c1301be3f6927
|
|
- Package update performed by
1. updating pip, pip-tools, setuptools
2. 'make test-refresh-deps' on ubuntu 22.04
3. fixing 'make test' and 'make docs' issues
on ubuntu 22.04
4. 'make test-refresh-deps' on ubuntu 20.04
- Add dependency for 'make test-refresh-deps'
to insure python venv is set up.
- Update of python formatter, black,
caused reformating of 41 python code
files.
Type: make
Change-Id: I7cafdf4b5189065ac57cb6b254937f6e0897a924
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
|
|
As per discussion on the VPP call, since they are being
used in CSIT tests and have not seen changes in a while,
mark the messages as production from the change process
standpoint.
Type: improvement
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
Change-Id: I7fda71edd923b798d034380320a869f7c35cb5a6
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I910c8ce1713c6d346cc5ea4eb58a89c1c30a10a1
|
|
+ Checkstyle demanded indentation edits.
Type: fix
Ticket: VPP-2083
Fixes: 9a9604b09f15691d7c4ddf29afd99a31e7e31eed
Change-Id: Ie2d33d290330247d36435a073675b732bb64ae93
Signed-off-by: Vratko Polak <vrpolak@cisco.com>
|
|
Move from synchronous flushing of io and ctrl events from transports to
applications to an async model via a new session_input input node that
runs in interrupt mode. Events are coalesced per application worker.
On the one hand, this helps by minimizing message queue locking churn.
And on the other, it opens the possibility for further optimizations of
event message generation, obviates need for rx rescheduling rpcs and is
a first step towards a fully async data/io rx path.
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Id6bebcb65fc9feef8aa02ddf1af6d9ba6f6745ce
|
|
Type: improvement
Remove rwlock contention on timestamps. ~10% pps with
10k sessions. Use fixed-size-pools of increasing sizes
starting with 4K, and with a x2 step each time.
We don't free/shrink allocated pools.
Change-Id: I5fea51faba40430106c823275a6356e81709d118
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
This replace the cnat ip4/ip6 to client
lookups previously done with a regular
hash, by a bihash lookup.
Type: improvement
Do the client lookup in a bihash instead of
a hash.
Change-Id: I730c1893525c002b44ada8e290a36802835e88e9
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
This adds a flag on the translation
asking the VIP & input-feature nodes
not to create the return session when
translating / load-balancing an incoming
flow. This is needed with maglev & DSR
Type: feature
Change-Id: I699012310ddc59f6ceeeb4878638eac6da5128dc
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
Type: improvement
Change-Id: I830f7a2ea3ac0aff5185698b9fa7a278c45116b0
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
more generic version of clib_sysfs_link_to_name with support for
format strings...
Type: improvement
Change-Id: I0cb263748970378c661415196eb7e08450370677
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
This patch removes zero checks for new_addr, new_port
meaning sessions with zero values will rewrite the packet
with a 0 value instead of leaving it in place. This allows
to reduce branchiness in the code, and sessions are fully
resolved at creation time anyway.
This also adds support for checksum offloads:
- IP checksum offload : we always compute the checksum to
avoid issues with drivers. We'll revert this if we realize
cost gets too important.
- TCP/UDP checksum offload : we add the implementation for
pseudo header checksum computation. This is needed for the
drivers that do not re-compute this pseudo-checksum before
the packet is TX-ed (e.g. a few DPDK drivers).
Type: improvement
Change-Id: I6543f3aec8c120ec50f4219108609138283620ef
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
Since gre is a plugin, nsh should not use symbol names directly.
Type: fix
Fixes: cefb178aa487a217d4ac75d7d4fa62db4b7d70fd
Change-Id: I1a1c20740aabdaafd69f507cd71016c3109b0205
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Avoid explicit manipulation of session state and generate closing event
if need be.
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I07cda1db08a2673b27b496ea1371b0dfd8e6f98a
|
|
Change-Id: Ieafbed6f2db3dec65e4b43d84a4661f6a1bbe891
Type: improvement
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: test
Change-Id: Ib1131eedb8eeaa9adfed9cfc47beeb1c7c8adb5c
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|