Age | Commit message (Collapse) | Author | Files | Lines |
|
avf_create_reply returns software index for the new interface
Change-Id: I8a6b1a1985b072efafa24eb258b1f2cb1bea1110
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
|
|
Move the tcp unit test to the plugin
Add a bihash unit test and a "make test" program to call it
Adjust framework.py to load the plugin, which is disabled by default
Change-Id: Ic229d386a56a9d28dbd54974f231149053ca8f93
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
One handler is good enough when engine sends out a retry status
Thus this patch will just go one branch
Change-Id: Id81cb3fa67d2b322b0fe1b2f62cd866cf3491eb4
Signed-off-by: Ping Yu <ping.yu@intel.com>
|
|
Change-Id: I5009fcfde5c627d59dea3edda15486b9392134a2
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
Change-Id: I63c36644c9d93f2c3ec6606ca0205b407499de4e
Signed-off-by: Eyal Bari <ebari@cisco.com>
|
|
with ip direct broadcast enable a packet to the interface's
subnet broadcast address with be sent L2 broadcast on the
interface. dissabled, it will be dropped. it is disabled by
default, which preserves current behaviour
Change-Id: If154cb92e64834e97a541b32624354348a0eafb3
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I0fc19dd109e569f2c407a85e8fa32758e06676b8
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: Iad7e0337a577ef8a0dfb7bde1968cc115d176043
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
DBGvpp# set interface rx-mode AVF0/4/2/0 interrupt
set interface rx-mode AVF0/4/2/0 interrupt
DBGvpp# sh int rx
sh int rx
Thread 0 (vpp_main):
node dpdk-input:
FortyGigabitEthernet6/0/0 queue 0 (polling)
node avf-input:
AVF0/4/2/0 queue 0 (interrupt)
DBGvpp# sh int addr
sh int addr
AVF0/4/2/0 (up):
L3 133.1.1.10/24
FortyGigabitEthernet6/0/0 (dn):
VirtualEthernet0/0/0 (up):
L3 192.168.42.1/24
DBGvpp# clear run
clear run
DBGvpp# clear interfaces
clear interfaces
DBGvpp# sh int rx
sh int rx
Thread 0 (vpp_main):
node dpdk-input:
FortyGigabitEthernet6/0/0 queue 0 (polling)
node avf-input:
AVF0/4/2/0 queue 0 (interrupt)
DBGvpp# ping 133.1.1.3 repeat 1
ping 133.1.1.3 repeat 1
64 bytes from 133.1.1.3: icmp_seq=1 ttl=64 time=.6237 ms
Statistics: 1 sent, 1 received, 0% packet loss
DBGvpp# sh int
sh int
Name Idx State MTU (L3/IP4/IP6/MPLS) Counter Count
AVF0/4/2/0 5 up 9000/0/0/0 rx packets 1
rx bytes 98
tx packets 1
tx bytes 98
drops 1
ip4 1
FortyGigabitEthernet6/0/0 1 down 9000/0/0/0
VirtualEthernet0/0/0 2 up 9000/0/0/0
local0 0 down 9000/0/0/0
DBGvpp# sh run
sh run
Time 41.9, average vectors/node 1.00, last 128 main loops 0.00 per node 0.00
vector rates in 2.3858e-2, out 2.3858e-2, drop 2.3858e-2, punt 0.0000e0
Name State Calls Vectors Suspends Clocks Vectors/Call
AVF0/4/2/0-output active 1 1 0 1.24e4 1.00
AVF0/4/2/0-tx active 1 1 0 4.28e4 1.00
api-rx-from-ring any wait 0 0 2 6.94e4 0.00
avf-input interrupt wa 1 1 0 1.09e4 1.00
avf-process any wait 0 0 47 1.01e4 0.00
...
DBGvpp#
DBGvpp# set interface rx-mode AVF0/4/2/0 polling
set interface rx-mode AVF0/4/2/0 polling
DBGvpp# sh int rx
sh int rx
Thread 0 (vpp_main):
node dpdk-input:
FortyGigabitEthernet6/0/0 queue 0 (polling)
node avf-input:
AVF0/4/2/0 queue 0 (polling)
DBGvpp# ping 133.1.1.3 repeat 1
ping 133.1.1.3 repeat 1
64 bytes from 133.1.1.3: icmp_seq=1 ttl=64 time=.2038 ms
Statistics: 1 sent, 1 received, 0% packet loss
DBGvpp#
Change-Id: Ib7d2b505ae4bb74a052263af766ca37d9df7bfe4
Signed-off-by: Steven <sluong@cisco.com>
|
|
Fix a typo from previous patch. Change 0x104 to 0x1004.
Change-Id: I82230a8a0ec01567eb1d4bc12ac02062c2a98347
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Change-Id: Ieb8b53977fc8484c19780941e232ee072b667de3
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Thus when engine buffer is full during a burst in performance
tesing, this code will help VPP handle retry machansim.
Change-Id: I0f9fc05d3dba8a54d34dca4c6137700d6c80f714
Signed-off-by: Ping Yu <ping.yu@intel.com>
|
|
The length field is included in the checksum. Therefor, we need
to update it before calculating the checksum.
Change-Id: Id23234efb80ea3747a0f8a5c7bf8621748d27635
Signed-off-by: Andreas Schultz <andreas.schultz@travelping.com>
|
|
If a PMD writes too many log messages using rte_vlog(), the
pipe for logging can fill and then rte_vlog() will block
on fflush() while it waits for something to read from the other
side of the pipe. That will never happen since the process node
that would read the other side of the pipe runs in the
same thread.
Set the write fd to non-blocking before the call to
rte_openlog_stream(). If the pipe is full, calls to write() or
fflush() will fail but execution will continue.
Change-Id: I0e5d710629633acda5617ff29897d6582c255d57
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Recognize the PF and VF device IDs for the Mellanox adapter
used on Azure.
Change-Id: Ic7b36b37ac93db2b696354ffe6fa2b6d62ee3801
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Change-Id: I7513c41307e62068ab5d9739cac393675c6066f8
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
This patch addresses the coverity scan warnings reported for the DPDK
plugin.
Change-Id: Ie7ac7ffcf4a6c63245eae0f9910a193ab1e318a8
Signed-off-by: Marco Varlese <marco.varlese@suse.de>
|
|
Configure w/ --enable-dlmalloc, see .../build-data/platforms/vpp.mk
src/vppinfra/dlmalloc.[ch] are slightly modified versions of the
well-known Doug Lea malloc. Main advantage: dlmalloc mspaces have no
inherent size limit.
Change-Id: I19b3f43f3c65bcfb82c1a265a97922d01912446e
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: I23be9c29227e7dd1bb11b5b7fa910bb61c2be6c9
Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>
(cherry picked from commit b4b2488202ff4282cc4a7bd779cc33934286c5cd)
|
|
The length in the GTPU header does not specify the length of the
payload. It does specify the number of bytes following the fixed
part (the first 8 bytes) of the GTPU header (see 3GPP TS 29.060,
Sect. 9.3.1).
Change-Id: I8ce73df015e1cf1f38d306666962c0058756111c
Signed-off-by: Andreas Schultz <andreas.schultz@travelping.com>
|
|
The fourth GTP-U packet had a wrong reference, leading to data
corruption.
Change-Id: Id82f87368183d5e8b7047133c5ea799f2a9cb43c
Signed-off-by: Andreas Schultz <andreas.schultz@travelping.com>
|
|
Change-Id: If6970788396c85415634f12304f49eed0d812281
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Fix the copypaste-triggered errors in load-from-file ACL test code.
Also, add an explicit exit(1) after clib_error() to convince coverity
that code path is terminal indeed.
Change-Id: I1deedb49144559c9183449005ada0433c24db18a
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
Change-Id: I003e41786c549c6451a1e9e178f5871d32c20e6e
Signed-off-by: Ping Yu <ping.yu@intel.com>
|
|
The driver implements Cavium QLogic FastLinQ QL4xxxx 10G/25G/40G/50G/100G
Intelligent Ethernet Adapters (IEA) and Converged Network Adapters (CNA)
(doc/guides/nics/qede.rst)
Change-Id: If17e8cb572eb8c0585085be1c7cfdfa159eb6e68
Signed-off-by: Igor Mikhailov (imichail) <imichail@cisco.com>
|
|
Change-Id: I72978c5957cb1acf154c9de7ad153092bac37785
Signed-off-by: Francois Clad <fclad@cisco.com>
|
|
Change-Id: I28d05a04abd11f630035d34ce573016c77ffab53
Signed-off-by: shenJibiao <shenjibiao@corp.netease.com>
|
|
thanks to coverity... validate that the length of the packet on
wire matches the size of the header based on the number of groups
and sources. drop those that don't match.
Change-Id: Iab3f3a835f6a43d9c73c5d502ea5ceccdd6985b0
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
It is cheaper to get thread index from vlib_main_t if available...
Change-Id: I4582e160d06d9d7fccdc54271912f0635da79b50
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: Ie7621a38a44e7c692e23e58c43d27d8d2aab43e6
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I2cb4cf2167b6e958d2e57b461848a4a189e3fda0
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I57f1db6fabfdb8ddfba514ad754707b24d47c962
Signed-off-by: Francois Clad <fclad@cisco.com>
|
|
Add missing VALIDATE_SW_IF_INDEX macro / check.
Net of this fix, a spurious warning will probably recur. Coverity will
complain that sw_if_index is tainted. Please dismiss the warning.
Change-Id: Iec31ce1d86f742e197e63b0c5d474cd5e496ee5f
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: Id6aba75c30712e9a0ac7b3075bd6cfc49d6bec36
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I56eb15f8fd2d3049845287dc3df7870582764f8b
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
Change-Id: If4da80c7eefe55905594eaaba0946d75f0892da5
Signed-off-by: Igor Mikhailov (imichail) <imichail@cisco.com>
|
|
Change-Id: Ieb8020f57ed5ad20daf552cd62ae3fdd8c573926
Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
|
|
Increase batch size when recycling buffers. This increases Mpps by 7%.
Change-Id: I2a460611d9c36e9bf087b076fc4e187acf61108f
Signed-off-by: Brian Brooks <brian.brooks@arm.com>
|
|
Change-Id: I5e5b2dd4f4bc3e257824015c723228ac5128d6a0
Signed-off-by: Brian Brooks <brian.brooks@arm.com>
|
|
- Enable/Disable an interface for IGMP
- improve logging
- refactor common code
- no orphaned timers
- IGMP state changes in main thread only
- Large groups split over multiple state-change reports
- SSM range configuration API.
- more tests
Change-Id: If5674f1044e7e97274a711f47807c9ba689d7b9a
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: Ib06d9ce0fad48b784fd47db13c7a2f353c845fca
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I8d284117a668dc55c06a6d68fe358a3d7e26c738
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
|
|
Change-Id: Ie899ccbaae4df7cce4ebbba47ed6c3cce5269bdb
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: Ibd3a8d28d8f1df2bc14c42e48498f6ac26081192
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
|
|
gcc8 introduced a new warning (Wstringop-truncation) which in our case
is being treated as error.
Disabling the warning globally might introduce bugs related to string
truncation which are not desired by the developer (e.g. bug).
Instead, this patch disables the warning only for those occurences
which have been verified to be non-bugs but the desired behaviour as per
developer will.
Change-Id: I0f04ff6b4fad44061e80a65af633fd7e0148a0c5
Signed-off-by: Marco Varlese <marco.varlese@suse.com>
|
|
A small store into a middle of a larger structure that was subsequently
loaded for calculating the bihash key was noticeably impacting the performance.
Change-Id: If7f33e1b66e8b438ba7cc91abc0ca749850c6e45
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
Slightly refactored from the initial implementation of the TupleMerge [1]
algorithm by Valerio Bruschi (valerio.bruschi@telecom-paristech.fr)
[1] James Daly, Eric Torng "TupleMerge: Building Online Packet Classifiers
by Omitting Bits", In Proc. IEEE ICCCN 2017, pp. 1-10
Also add startup parameters to turn on/off the algorithm ("use tuple merge 1/0"),
and a startup parameter to be able to tweak the split threshold
("tuple merge split threshold N"), the default value of the split threshold
is 39 as per paper, but some more tuning might be necessary to find the best
value.
This change, alongside with the optimizations which avoid extra lookups,
significantly reduces the slowdown on the ClassBench generated ACLs, which
are supposed to resemble realistic ACLs seen in use in the field.
Change-Id: I9713e4673970e9a62d4d9e9718365293375fab7b
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
Change-Id: I6fa4c6bf9c4e96ba4502a06907bdecc654ace665
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: Iddb0b848c53da03116524e203c7112c82b401ac5
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
Change-Id: Iedebbac71d3e694b915d6a126c80ecc3b5473a4a
Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>
|