Age | Commit message (Collapse) | Author | Files | Lines |
|
This improvement intended to allow sending of LLDP packets on an
interface even if the interface cannot support programming an extra
MAC address in order to receive LLDP messages from the attached
link peer.
vnet_hw_interface_add_del_mac_address function fails on some
'virtio' interfaces due to limitation to set MAC addresses.
Type: improvement
Change-Id: I636de148736a0797d1fd70c6ab14759ff8fa42be
Signed-off-by: Dmitry Vakrhushev <dmitry@netgate.com>
|
|
IPSec punting to IKEv2 is valid only for NAT-T in IPv4.
Fix coverity CID 214915.
Type: fix
Change-Id: I6f2db38abf179565316f50c5d47c78acce3a0d01
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Currently thread with telemetry is enabled by default, to prevent
to use resources, thread should be off. The thread can be switch on
back using additional option in the dpdk's stanza.
dpdk {
telemetry
}
Type: feature
Change-Id: I1c25e8ee99f31dd01dc372f54e77e81a5bb67126
Signed-off-by: Dmitry Vakrhushev <dmitry@netgate.com>
|
|
We cannot disable dpdk plugin if hugepages are not present, as there
are some valid uses cases where dpdk works unpriviledged without
hugepages.
Type: fix
Change-Id: If67d8c941617ac0f16d496655d2bb6e489d34ad4
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: fix
With DPDK 20.08, mlx5 devices get bound to the mlx5_pci PMD instead
of net_mlx5. Update the name in foreach_dpdk_pmd so the PMD will be
correctly recognized during initialization.
Change-Id: I1863ec55da9fcf6a289959dff22ca2dcc5d114bc
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Type: fix
Change-Id: I1d278fc2b03b948c054ff1686315635ac0278ae8
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: improvement
geneve uses the UDP source port for the flow hash to get load-balancing
over multiple paths to the tunnel destination. However, if there is only
one path, then we can elide the LB object, contributed by the resolving
FIB entry, from the dasta path.
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I13a1bedc307a474d258a757bc1bae28564798730
|
|
Change-Id: Ie90437cf597c5d53ab1cc41ea7db15b97614e2fc
Signed-off-by: Mohammed Hawari <mohammed@hawari.fr>
Type: improvement
|
|
Change-Id: I623617ad3c80610805dd3cf2a5f371e6677f4844
Signed-off-by: Mohammed Hawari <mohammed@hawari.fr>
Type: improvement
|
|
fixes the coverity issue 214893.
Type: fix
Fixes: 1ab533cba2202e73c2296d7677d0b335f2afad7b
Change-Id: I1159f5e23d1cdfcf6575c29d11e884703afee20f
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
fixes coverity errors 215294, 215295
Type: fix
Fixes: af897c5e3fa76180fbe0634052bde98b4b3c34d7
Change-Id: Ie5da2bcddb465020d827d9f7c519a528cf2bd035
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
Fixed compatibility issue between
nat ei and nat ed modes. Moved nat
syslogging to nat librarry. Deprecating
apis that will be integrated in upcoming
candidate configuration patch.
Type: refactor
Change-Id: I334b1b05b81b74667c5c76a05f768442e0dcf7e8
Signed-off-by: Filip Varga <fivarga@cisco.com>
|
|
Type: docs
Change-Id: I1d28fb31032412f0231d677e45281ca88185502e
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
ethernet dataplane loads MAC addresses as 64-bits loads for efficiency.
We must make sure it is valid, especially for the vector of secondary
MACs.
Type: fix
Change-Id: I851e319b8a973c154e85ff9f05f3b8e385939788
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
crypto_native/main.h is being built as default,
and crypto_native_main is initialized with a size of 64 bytes.
crypto_native/aes_gcm.c and crypto_native/aes_cbc.c are march
variants, their ICL variants are expecting crypto_native_main
to be 256 bytes.
Type: fix
Signed-off-by: Georgii Tkachuk <georgii.tkachuk@intel.com>
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Signed-off-by: Ray Kinsella <mdr@ashroe.eu>
Change-Id: I4cddb75b712ea83c9cfca621887605d7bae104ec
|
|
Cleanup of print functions in api file,
splitting functionality of cleanup callbacks for ED
and EI NAT. Updating and fixing API & CLI calls.
Type: refactor
Change-Id: I7a9dc4c8b1d2ca29db4754be7dfa4f698942127a
Signed-off-by: Filip Varga <fivarga@cisco.com>
|
|
Type: fix
Change-Id: I82b11339402b5848b27c600f6484aaeee66cc888
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: fix
IPfix messages about NAT44 session create/delete were being populated
with the FIB table index instead of the table ID. The table ID is the
correct identifier to report externally (NAT64 IPfix messages for BIB
and session create/delete use table ID, as does NAT syslogging). Convert
the table index to an ID before adding it to the IPfix NAT44 session
create/delete message data.
Change-Id: I0166384752b17ff3a8c55aa19fa2af7a8140791e
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Type: fix
When using sNAT in combination with cnat translations
it might happen that the cnat_node_vip.c picks up a
translation on a session that has an invalid lb index,
thus resulting in a later crash in ip4-load-balance
Change-Id: I82607086b2d672a9dcf26bfb82ad7f83e6474562
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I73fbf991f42e643f906b6a3badd95ef46106eb25
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I21bda0c46406aff54ad8fe5e44491e8e332de170
|
|
Type: test
Change-Id: I9c1129a8596344551f3f8f2e029846d22511482e
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
When using classifier to filter traces, not all packets will be traced.
In that case, we should only count traced packets.
Type: fix
Change-Id: I87d1e217b580ebff8c6ade7860eb43950420ae78
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: fix
Change-Id: Id922895c269f0d2450e55fcb6871b6857f443462
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Type: fix
Change-Id: I8c66f79f2d8cfff7c6d45e1fc5b529ffb3941491
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Type: fix
Fixes: 17a8ab6857f023bc1436d84808acc58dd614203e
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: I597d08d1d2457116e6856fa40cd65987e13a28d4
|
|
Type: improvement
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: I478f5dcbf7595c62611d25a40aa356d8ce09d216
|
|
Compile time reduced from ~30s to 2s for
cnat_node_vip.c & cnat_node_snat.c This doesn't
impact performance for now as ts update rwlock
is the main bottleneck.
Type: improvement
Change-Id: Ic92df300ae0dfddc5235c350bd021e73e7c850d9
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
Type: fix
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
Change-Id: I9930a2a90caa78e848fe657ab2da863467be41ea
|
|
Type: improvement
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: Ibbdfb0a2d1ff64044a0f6b2443b526bd1cf12f93
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I835b61f0b88a7324b09d82400debd78ad8b95401
|
|
Type: fix
Signed-off-by: Mohammed Hawari <mohammed@hawari.fr>
Change-Id: I428c87e581db335362fef30e274db8947a896416
|
|
Type: feature
Ticket: VPP-1935
Change-Id: I705f84047b112279377590157a1c7b4a34f693d2
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Type: fix
Change-Id: If87f4b8ae92508215fe91178958fe2ddb91e5a35
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
This helps to resolve sporadic failures in unit tests.
Type: fix
Change-Id: I3abd77ed74310f9729a841e8569eafe6d7758dcb
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Type: fix
Signed-off-by: Simon Zhang <yuwei1.zhang@intel.com>
Change-Id: Ib454ccae5a81f91a744db82b72c7f1fcb29aa0cc
|
|
Calculate bihash buckets as n_elts / 2.5 rounded to closest pow2
per Damjan's recommendation. Remove memory configuration parameters
because bihash init ignores them anyway as it resides in main heap now.
Type: improvement
Change-Id: I189f463f3c4640106cce4f12d3c5a62969276a82
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Type: feature
Change-Id: I0db0a9b2f872753fa64d27335838cb34645a9ee8
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
- we should not copy and iterate over the pool underlying vector, as
slots can be freed (ie in the freelist).
- delete interface instead of adding them again
- fix the log message
Type: fix
Change-Id: If0a7a2f475b4f40793eb29ea80a9d29fe5d1bcb9
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: fix
Change-Id: I33c38c791cc9a28898de402ae831c4862073eb2d
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Type: feature
- use tunnel_encap_decap_flags to control the copying of DSCP/ECN/etc
during IPSEC tunnel mode encap.
- use DSCP value to have fixed encap value.
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: If4f51fd4c1dcbb0422aac9bd078e5c14af5bf11f
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I58fb0e05f62eae45818c23e8e148ff6758ba463a
|
|
Type: refactor
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
Change-Id: Id1801519638a9b97175847d7ed58824fb83433d6
|
|
Getting an unexpected EPOLLOUT for RX queue and crashing due to missing
callback function on write_function to handle EPOLLOUT.
(gdb) f 5
f 5
node=<optimized out>, vm=0x7f948bbe4540 <vlib_global_main>) at /vpp/src/vlib/unix/input.c:325
325 errors[n_errors] = f->write_function (f);
(gdb) p *e
p *e
$21 = {events = 4, data = {ptr = 0x23, fd = 35, u32 = 35, u64 = 35}}
(gdb) p file_main.file_pool[e->data.fd]
p file_main.file_pool[e->data.fd]
$22 = {file_descriptor = 37, flags = 1, polling_thread_index = 0, private_data = 65536,
read_function = 0x7f944a87b140 <memif_int_fd_read_ready>, write_function = 0x0,
error_function = 0x0, description = 0x7f944be22400 "memif0/1 rx 0 int", read_events = 0,
write_events = 1, error_events = 0}
(gdb)
File descriptors are recycled. It is likely that the EPOLLOUT is meant
for the previous owner of the same file descriptor number which memif
recycled and memif RX did not expect to receive an EPOLLOUT. For
defensive play, we create a dummy callback function to ignore the
EPOLLOUT instead of crashing.
Type: fix
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: I535cadbb9b71d3db2995b118c59a12c71f10af09
|
|
Type: fix
Signed-off-by: Ryujiro Shibuya <ryujiro.shibuya@owmobility.com>
Change-Id: If7e22978a6b65f5b68ccb2bd97b5e0fba167b3bf
|
|
Type: improvement
Change-Id: Ifea5f0c2fecb99fd320a2e1141f4b4f0d6a793ca
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
/vpp/src/plugins/rdma/rdma.h:203:17: error: field 'buffer_template' with variable sized type 'vlib_buffer_t' not at the end of a struct or class is a GNU extension [-Werror,-Wgnu-variable-sized-type-not-at-end]
vlib_buffer_t buffer_template;
Type: fix
Change-Id: I4661839f262e01fe274a2ee7b3cb70f9bc6b7c62
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: fix
Change-Id: I4aa0dac544582703316cbcfabe67bcb7dc24d4f7
Signed-off-by: Filip Varga <fivarga@cisco.com>
|
|
Type: improvement
Change-Id: Iafcaeb88fa3569e042fb9cb270cf062b145416e2
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
- Enabling arc "device-input" with the next node "pppoe-input" on the pppoe cp interface: to get rid of L3_MAC_MISMATCH error
- Parsing in the "pppoe-input" node fixed to parse all headers from the scratch
- Getting mac address directly from encap interface when filling up DPO adjacency. Anyway, in the case of the dot1q subinterface, we need to get vlan tags to fill the DPO adjacency.
Type: improvement
Change-Id: I5405931b0f58bef7b852c079a7e66e0da8b5de0f
Signed-off-by: Stanislav Zaikin <zstaseg@gmail.com>
|